261 offers 1 mw gas

Category: 1101: power generators
approved
dealer
New in: 2006
Price: 60.000 €
Location: Land-nl NL Rijsenhout, Aarbergerweg 9G
Seller: ALL POWER SOLUTION

AVAILABLE FOR SALE!USED GAS GENEARATOR SET. MAKE: MWM TYPE: TCG2020 V16 POWER RATING: 1600 KW YEAR:2006 HOURS: 55.000 ALTERNATOR: MIRELLI,400V,50HZ,1500 RPM TOTAL HOURS 55.000, GENSET HAS BEEN OVERHAULED BY 40.000 HOURS. SCOPE OF DELIVERY: COMPLETE GENSET CONTROL PANEL GAS STREET HEAT EXCHANGER

Category: 107: sheet metal working
New in: 2014
Price: 225.000 €
Location: Wiener Neudorf
Seller: HESSE+CO GesmbH

: 1.070 - 1.080 nm : 5,0 kHz : 45,0 kWh : 12,0 mm : 6,0 mm : 6,0 mm : 3.060 mm : 1.550 mm : 200 mm : 3.000 x 1.500 mm : 1.000 kg : 10.150 x 4.050 x 2.420 mm : 12.000 kg Fiber laser HESSE HDFL made by DURMA The laser power source (resonator) of the HDFL series is an YAG or all-solid-state fiber laser without the need of any laser gas. The fiber laser light is brought to the cutting head by a flexible glass fiber cable requiring no mirrors. This technology reduces the amount of maintenance to a minimum and offers the lowest possible running cost with a wall-plug efficiency of 30 %. This fiber laser will cut faster at lower operational cost than any CO2 laser at the same power. It makes th ...

Category: 1101: power generators
approved
dealer
New in: 2007
Price: 6.000.000 €
Location: Land-ru RU Russian Federation
Seller: RUSOFFERS Co.

26 MWe WARTSILA 20V34SG [10913kVA x 3 sets] Unused Natural gas fired complete CHP power plant Ancillaries included 2007Y 10500V 50Hz 750RPM 0HRS since new Installed Dismantling Packaging Relocation required Presales Bidding Marketing EXW Russia. RUSOFFERS TRADERS TEAM [ROTT] has been looking for the strategic Company Partner (Co-Partner), which would have competences, funds / resources and interest in acquisition and relocation of the above-mentioned unused complete asset for fulfillment of turnkey decentralized power/energy generation project. ROTT aimed to establish long-term business relationship with Co-Partners specializing as the experienced EPC-contractor or Service provider or  ...

Category: 104: grinding machines
approved
dealer
New in: 2002
Price: request quote
Location: Düsseldorf
Seller: Knops Werkzeugmaschinen

internal diameter: 100 mm grinding depth: - mm swing diameter: - mm grinding diameter: 120 mm grinding length: 110 mm centre height: mm control: Siemens 840 D total power requirement: 56 kW weight of the machine ca.: 6,3 t dimensions of the machine ca.: 3,8 x 2,6 x 2,2 m STUDER S140 - CNC cylindrical I/D grinding machine with Q-axis (2 internal grinding spindles) DESCRIPTION Hours 52,966 Current state very good / very precise Max grinding I/D diameter 100 mm Software version: SIEMENS 840D V2-01 Maximum/average power requirement 56 kVa/28 kVa Voltage 3x 380 ±10Volt / 50 Hz Weight of the machine ca. 6,0 t Dimensions of basic machine 2,560 x 1,810 x 2,200 Coolant system: Oil Fire extinction  ...

Category: 1101: power generators
approved
dealer
New in: 2008
Price: request quote
Location: Land-nl NL 2761J Zevenhuizen (South Holland), Zuidelijke Dwarsweg 11B
Seller: ModderkolkHortiServices GasPowerHolland

CONTAINER SETS - NEW SETS Engine Make MWM (Deutz) Engine Type TCG 2020 V20 Power KW 2070 KW Power Output 2012 KW RPM 1500 Fuel Natural Gas Generator Model AvK DIG 130 K / 4 Generator Power 2420 KvA Volts 10000 Hz 50 Year of Manu. 2008 Running Hours 0 Tel: +31 (0)6-22497850 George Modderkolk / Manager ( Dutch, English ) +31 (0)6-38639071 Leon Hensen / Sales ( Dutch, English ) LEON@MODDERKOLKHORTISERVICES.COM

Category: 109: other metal working machines
approved
dealer
New in: 2001
Price: request quote
Location: ab Standort
Seller: Teutenberg Maschinen GmbH & Co.KG

internal diameter: 1600 mm capacity: ? Stück/h quality: Schutzgas/protection BELL ANNEALING LINE (PROTECTION GAS) Constr. Ebner Type: Hog 160/330 St-H2 Year: 2001 Gasheated HICON/H2-high convection bell furnace for heattreatment of steel-strip coils techn. data: charge dimensions: max. coil-á 1.450 mm stacking height: 3.300 mm working temperature: max. 850°C (under cover) Upper limited temperature in furnace chamber: 950°C total gas power: 900 kW maximum base load: 35 to. complete line photos on request The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: 1101: power generators
approved
dealer
New in: 2018
Price: request quote
Location: Land-nl NL 2761J Zevenhuizen (South Holland), Zuidelijke Dwarsweg 11B
Seller: ModderkolkHortiServices GasPowerHolland

4 PIECES IN STOCK, AVAILABLE DIRECT! Engine Make MWM Engine Type TCG 2020 V20 Power KW 2000 KW Power Output 1983 KW RPM 1500 Fuel Natural Gas Generator Model Marelli MJH 630 LA4 Volts 10000 Hz 50 Year of Manu. 2018 Running Hours 0 BRAND NEW! Tel: +31 (0)6-22497850 George Modderkolk / Manager ( Dutch, English ) +31 (0)6-38639071 Leon Hensen / Sales ( Dutch, English ) LEON@MODDERKOLKHORTISERVICES.COM

Category: 107: sheet metal working
New in: new
Price: 85.140 €
Location: Wiener Neudorf
Seller: HESSE+CO GesmbH

: 2.000 x 4.000 mm : 170 A : . 5.650 ca mm : . 4.900 ca mm : . 1.928 ca mm : 5.900 ~ kg HyPerformance plasma power source Hypertherm XPR 170 CORE automatic gas console plasma ignition consol  command torch height control  CNC control Lantek software with auto nesting  marking system  control of filter unit by CNC  remote control diagnostic by Ethernet  spare parts starting kit  cutting plate alignment function  user manual in GERMAN and ENGLISH (sample photo) optional Equipment: suction with filter unit  â?¬ 16.290,- torch brake away system  â?¬ 5.750,- working area: 2.000 x 4.000 mm plasma source: Hypertherm XPR 170 CORE evacuation: option capacity: mil ...

Category: 1101: power generators
approved
dealer
New in: 2004
Price: request quote
Location: Land-nl NL 2761J Zevenhuizen (South Holland), Zuidelijke Dwarsweg 11B
Seller: ModderkolkHortiServices GasPowerHolland

Engine Make MWM (Deutz) Engine Type TCG 2020 V16 Power KW/RPM 1558 / 1500 Fuel Natural Gas Generator Model Marelli Generator Power 2300 kvA Volts 400 Hz 50 Year of Manu. 2004 Running Hours +/-30.000 Build inside a container. Tel: +31 (0)6-22497850 George Modderkolk / Manager ( Dutch, English ) +31 (0)6-38639071 Leon Hensen / Sales ( Dutch, English ) LEON@MODDERKOLKHORTISERVICES.COM

Category: 107: sheet metal working
New in: new
Price: 83.540 €
Location: Wiener Neudorf
Seller: HESSE+CO GesmbH

: 1.500 x 3.000 mm : 170 A : . 4.650 ca mm : . 4.300 ca mm : . 1.920 ca mm : 5.100 ~ kg HyPerformance plasma power source Hypertherm XPR 170 CORE with ",true hole", technology automatic gas console plasma ignition consol  command torch height control CNC control BECKHOFF Lantek software with auto nesting control of filter unit by CNC  remote control diagnostic by Ethernet spare parts starting kit cutting plate alignment function user manual in GERMAN and ENGLISH Options: torch brake away system â?¬ 5.750 ,- suction with filter unit  â?¬ 16.290,- working area: 1.500 x 3.000 mm plasma source: Hypertherm XPR 170 CORE evacuation: incl. capacity: mild steel max. 3 ...

Category: 1101: power generators
New in: 2012
Price: request quote
Location: Land-fi FI 00980 Helsinki, Itakatu 1-5, 3rd Floor
Seller: JADE Trading OY

Power Plant 38.85 MW with 8 x MWM TCG 2030V16 gas generating sets This power plant was comissioned in November 2012 and it has 8 units of MWM 4.3 MWe gas engine driven generating set and 4.45 MWe steam turbine utilizing 18 bar steam generated with engine cooling and exhaust gas heat. Total eletric generation capacity 8 gensets with steam turbine is 38.85 MWe and natural gas consumtion at full load is approx 8536 Nm3/h which is giving total generating efficiency approx 44.5%. Engines has very limited operating hours from 6300 to 11100 hours only and thus the equipment is in very good condition. Power Plant in Nut Shell Type of gas engines: MWM TCG 2030V16 Engine speed: 1000 rpm N ...

Category: 107: sheet metal working
approved
dealer
New in: new
Price: request quote
Location: Ahaus
Seller: A+B Werkzeug Maschinen Handels GmbH

tube diameter: 2 x 3,91 mm ST tube diameter: 60 x 4,5 mm GAS revolutions per minute: 2,5 U/min radius: min. 2 x D mm bar material - diameter: 35,0 mm total power requirement: 1,5 kW weight: 140 kg range L-W-H: 595 x 900 x 363 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: 1101: power generators
New in: 2005
Price: request quote
Location: Land-fi FI 00980 Helsinki, Itakatu 1-5, 3rd Floor
Seller: JADE Trading OY

Wartsila 52 MW CHP Power Plant with 6 x 20V34SG Gas Generators - 2005 Complete running power plant with 6 units of Wartsila 20V34SG spark ignited natural gas engine driven generators. Plant has the heat recovery boilers which can produce 6 x 4.5 t/h low pressure steam. The main equipment was delivered and commissioned by Wartsila in year 2006 and 2008 and today the units have approx 40 000 - 50 000 operating hours depending on unit. The equipment is in good operational condition but the engines need a 46 000 hour overhaul. Generators are installed on common base frame with the engines and common base frame is isolated from the foundation by flexible mounting with steel springs. Most of ...

Category: 1200: machines and plants for process engineering
New in: used
Price: request quote
Location: Land-nl NL Barneveld The Netherlands
Seller: Foeth

Make UIC gmbh, Type EA150/KD50/KD10, No F403-3443, New 2003, Film evaporator (2x) Short Path Distillation, Stoomwezen , Material stainless steel (1.4571), Working pressure -1/10 bar, With condensor , Mounted on frame , With switchgear , Weight 4000 KG, Including degasser, vacuümunit and condenserunit, volume 0,031m3, (8x)heatexchanger for heating/cooling/condenser/evaporating, (4x)vacuum rootsblower, make Busch, capacity 250-500 Nm3/h, (1x)vacuum liquidring, make Busch, capacity 108 Nm3/h, (6x)feed/discharge gearpump, make Maag, capacity 35 ltr/h, (3x)centrifugalpump, make GWK, capacity 1800 ltr/h, (1x )separatortank gas/liquid, make Busch/Aquamin, Including Monofluid unit, ss expansiontank ...

Category: 1101: power generators
New in: 2008
Price: request quote
Location: Land-fi FI 00980 Helsinki, Itakatu 1-5, 3rd Floor
Seller: JADE Trading OY

Wartsila 41 MW Single Cycle Power Plant with 6 x 16V34SG Gas Generators - 2008 Complete running power plant with 6 units of Wartsila 16V34SG spark ignited natural gas engine driven generators. The equipment was delivered and commissioned by Wartsila in year 2008 and today the units have approx 25 000 operating hours. The equipment is in very good operational condition but the engines need a 24 000 hour overhaul. Generators are installed on common base frame with the engines and common base frame is isolated from the foundation by flexible mounting with steel springs. Most of the auxiliaries are in the factory built in large new type modules which enable easy relocation of the equipme ...

Category: 107: sheet metal working
New in: new
Price: 534.000 €
Location: Wiener Neudorf
Seller: HESSE+CO GesmbH

: 1.070 - 1.080 nm : 5,0 kHz : 25 kWh : 8 mm : 4 mm : 6 mm : 170 mm : 120 x 120 mm : 150 x 100 mm : 8.500 mm : 3.000 mm : 185 mm fiber laser HESSE HD-TC made by DURMA The laser power source (resonator) of the HD-TC series is an all-solid-state fiber laser without the need of any laser gas. The fiber laser light is brought to the cutting head by a flexible glass fiber cable requiring no mirrors. This technology reduces the amount of maintenance to a minimum and offers the lowest possible running cost with a wall-plug efficiency of 30 %. This fiber laser will cut faster at lower operational cost than any CO2 laser at the same power. It makes the machine very economical, fast and easy to handle ...

Category: 1104: boilers
New in: 2003
Price: request quote
Location: Land-fi FI 00980 Helsinki, Itakatu 1-5, 3rd Floor
Seller: JADE Trading OY

Steam boiler Firetube LOOS Universal UL-S-IE, 16 tons per hour, 16 bar This boiler is three-pass single-flame tube/smoke tube type and it was delivered in 2003 by LOOS International. It can produce 16 tons / h saturated steam at 16 bar. It complete boiler with Weishaupt low-nox, multifuel burner, economizer, gas control valves, combustion air fan and Siemens Simatic S7 controls. The boiler is still installed and in good operational condition. The main characteristics: Made by: Loos International in year 2003. Capacity: 16 tons / hour (12 MW), saturated steam Steam parameters: Temperature 235 °C, max pressure 16 bar, saturated Burner type: Weishaupt WKGL 70/2-A, Burner model: ZM ...

Category: 106: presses
New in: 1955
Price: request quote
Location: Lager Ennepetal H 1
Seller: Wirths GmbH, Werkzeugmaschinen

pressure: 450 t Stroke: 1000 mm table surface area: 1200 x 750 mm spindle diameter: 300 mm weight of the machine ca.: 75 t total power requirement: 25 kW dimensions of the machine ca.: 3,5 x 2 x 5 m Friction screw press with extra wide table, spare screw and nut. Machine will be delivered with an oven fired with gas. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: 1101: power generators
New in: 2009
Price: request quote
Location: Land-fi FI 00980 Helsinki, Itakatu 1-5, 3rd Floor
Seller: JADE Trading OY

Wartsila 19 MW Natural Gas CHP Power Plant with 2 x 20V34 SG generators This complete power plant equipment including building structures were delivered by Wartsila in year 2009 and it is still in original shipment crates. This power plant has two Wartsila 20V34 SG natural gas engine driven generators with total gross electrical output 17.46 MWe at site condition (100 m elevation, temperature 20 C). The plant has a heat recovery system for hot water production and it has radiator cooling system for 100% of heat load. Power plant has advanced Wartsila control and supervision system with centralized Wartsila Operator's Interface System (WOIS). The engines are controlled with Wartsila Engin ...

Category: 112: gear cutting and hobbing machines
New in: 1973
Price: request quote
Location: Lager Ennepetal H 3
Seller: Wirths GmbH, Werkzeugmaschinen

max. wheel diameter: 1500 mm gear width: 280 mm max. module: 14 min. module: 1 table diameter: 1400 mm total power requirement: 86 kW weight of the machine ca.: 23 t dimensions of the machine ca.: 4 x 2,4 x 2,4 m Internal gear gasher for single teeth cutting. Machine was completly reconditioned in 2007 ! Machine comes along with a sound protection cabine, chnage gears and other equipment. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: 1101: power generators
New in: 1996
Price: request quote
Location: Land-fi FI 00980 Helsinki, Itakatu 1-5, 3rd Floor
Seller: JADE Trading OY

Power Plant 30 MW with MAN 3 x 12V48/60 HFO Diesel Generators Complete good condition power plant with three identical diesel generators with MAN B&W 12 cylinder 500 rpm HFO engines and Siemens alternators each generating 10 MW / 11 kV / 50 Hz. The equipment is manufactured in year 1996, engines has approx 65 000 operating hours and all equipment are very well maintained and in good condition. Cooling of engines is arranged with a cooling tower. The plant has Siemens made LV and HV (vacuum breakers) equipment, engine control is refurbished to Siemens Simatic ET200 PLC. With the delivery, there is plenty of original MAN spare parts. The complete plant is fully in operational condition ...

Category: 108: welding machines
approved
dealer
New in: 2005
Price: request quote
Location: Deutschland
Seller: IMZ Maschinen Vertriebs GmbH

table width: 1250 mm table length: 1250 mm Control: Replicator 1100 feeling width: 1250 mm width of cut: 1500 mm cutting length: 3000 mm total power requirement: kW weight of the machine ca.: 1 t dimensions of the machine ca.: 4,05x2,2x1,85 m Coordinate cutting machine PORO-OPTIMAT 12,50 / 30 MSR with Replicator 1100 / left extension consisting of: - Cross-wagon with coordinate drive via rack / pinion for both axles - Magnetic Toothed Couplings - base with scanning table 1250x1250mm (moveable) -Replace control Replicator 1100 (50-3000mm / min) for autogenous and plasma drive, automatic corner deceleration - Burner and valve control for 4 pieces of cutting torch - Type of gas: acetylene - Bur ...

Category: 708: refrigeration engineering
New in: 2002
Price: request quote
Location: Land-fi FI 00980 Helsinki, Itakatu 1-5, 3rd Floor
Seller: JADE Trading OY

Liquid Chiller GEA Grasso FX 2800 / s - 2 x 2800 kW Two GEA Grasso FX PV 2800 S - screw type liquid chiller compressors were installed in 2003 (made in 2002) and they still installed and in very good working condition. The compressors have flooded evaporation, plate type evaporator and evaporative condenser cooler. type They have been operated only 15 000 hours, their cooling capacity is 2800 kW/unit. Refrigerant is R717 (NH3) The delivery includes complete system with compressor package, evaporators, pumps, intermediate NH3 tanks, evaporative condenser and control cabinets. The screw compressor sucks NH3 gas out of the liquid separator and compresses it up to condensation pressure. ...

Category: 1503: gas forklift trucks
approved
dealer
New in: 1998
Price: request quote
Location: Bottrop
Seller: Sperling Werkzeugmaschinen

weight max. in kg: 3000 kg height of stroke: 5520 mm fork length: 1,20 m Number of working hours: 8000 h weight of the machine ca.: 4550 kg dimensions of the machine ca.: 2,60 x 1,10 x 2,50 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: 1101: power generators
approved
dealer
New in: 2008
Price: 225.000 USD
Location: Land-ru RU Krasnodar
Seller: RUSOFFERS Co.

RUSOFFER-046 1.03MWe CATERPILLAR G3516 [1287 kVa x1] Used Containerized Natural gas fueled Power plant 2008NCY 400V 50HZ EE35.4% 1500RPM 36000HRS since new Refurbished and Packaged 2013Y 35700HRS EXW Russia. RUSOFFERS TRADERS TEAM [ROTT] has been looking for the strategic Company Partner (Co-Partner), which would have regular interest in acquisition and relocation of the above-mentioned used complete asset for fulfillment of turnkey decentralized power/energy generation project. ROTT aimed to establish long term business relationship with Co-Partners specializing as the engineering company or EPC-contractor engaged in next business areas: - OEM independent service providers of c ...

Category: 103: milling machines
approved
dealer
New in: 2016
Price: request quote
Location: 89312 Günzburg
Seller: Ralf Schmeißer Werkzeugmaschinen

x-travel: 650 mm y-travel: 510 mm z-travel: 510 mm table surface area: 750 X 510 mm control: HEIDENHAIN TNC 530 I spindle turning speed range: 12000 U/min spindle drive: 11 kW : 20 St. tool adaptor: BT 40 internal coolant system feed: 20 bar feed: 15 m/min rapid traverse: 48 m/min total power requirement: 25 kW weight of the machine ca.: 4.2 t - Control HEIDENHAIN I TNC 530 HSCI Machine complete with: - Control cabinet cooling with air conditioning unit - Flat screen 15 - HEIDENHAIN measuring rulers x, y, z - HEIDENHAIN sealing air - HEIDENHAIN Handwheel HR-410 - 12,000 rpm / ISO 40 with direct drive 10/14 kW - Cooling unit - Internal coolant supply 20 bar (Grundfoss pump) with 2 grinding fi ...

Category: 1102: engines
New in: 2006
Price: 8.000 €
Location: Land-at AT 6271 Uderns, Dorfstraße 75
Seller: MGE-tech GmbH

TCG 2020V12 Biogas engine / ca. 45.000 h Motor starts running until the last minute. Expanded due to an engine swap. Can besichtiget be.

Category: 109: other metal working machines
approved
dealer
New in: 2004
Price: request quote
Location: DE-78234 Engen
Seller: ProdEq Trading GmbH

degree: working heigth: mm length: mm --------------------------------------------------: DIMENSIONS / WEIGHTS: - space requirements -left/right-: 8750 mm - space requirements -front/back-: 3700 mm - total height: 3100 mm Rollenherdofen WMU VKR 3900g 2000 Bauj. 2004, Schutzgasfähig Nutzraum: 2000 x 50 (150) Durchsatz: 600 kg/h Nenntemp.: 950 °C Heizleistung: 280 KW 3 Heizzonen je 950°C Heizlänge: 3900 mm Nutzraumbreite: 2000 mm Nutzraumhöhe: 50 (150) mm Durchsatzleistung: 600 kg/h Ofenvolumen: 7.1 m3 7 Rekuperator - Strahlrohrbrenner 3-fach Lichtschranke 4 separate Antiebe Rollendurchmesser: 50 mm Rollenteilung: 77 mm Anlage ist demontiert und eingelagert The data ...

Category: 1102: engines
New in: 2015
Price: 20.000 €
Location: Land-lt LT Kedainiai
Seller: JSC ENVIJA ES

Electrical power: 800 kW Gas: natural gas YOM: 2005 Moto hours: approx. 42000 mh. Scope of supply – genset, without control panel and gas train. Including engine, base frame and alternator (400V, 50Hz). Delivery/sell conditions: EXW Lithuania / AS IS WHERE IS

Category: 109: other metal working machines
approved
dealer
New in: 2005
Price: request quote
Location: DE - 78234 Engen
Seller: ProdEq Trading GmbH

degree: working heigth: mm length: mm Roller hearth furnace with electrical/gas heating for treating coated and uncoated sheet metal blanks for hot-forming process Dimensions of the blanks: - Length: 300 - 1.000 mm - Width: 1.000 - 1.875 mm - Thickness: 1,0 - 1,5 mm - Weight: 1.5 - 20 kg Inner dimensions of the furnace: - Width: 2.200 mm - Heated length approx. 22.000 mm Furnace rollers: - Diameter: 60 mm - Pitch 150 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: 1101: power generators
approved
dealer
New in: 2010
Price: 60.000 €
Location: Land-uk UK
Seller: Gas Engine Exchange Ltd

MWM Biogas Genset Year: 2010 Hours: 66.370 Stage in Service: Maintained under full-service contract. Scope of Supply: Engine, Alternator, Base Frame. Capacity: 1.2 MW Voltage: 400v General Condition: Needs major overhaul. Price: Place bid.

Category: 109: other metal working machines
approved
dealer
New in: 2007
Price: request quote
Location: DE-78235 Engen
Seller: ProdEq Trading GmbH

degree: working heigth: mm length: mm Roller hearth furnace with electrical/gas heating for treating coated and uncoated sheet metal blanks for hot-forming process Working temperature max.: 980°C Material temperatur max.: 930°C + 15 K furnace: 10 heating zones inner dimensions: length: 22.630 mm, width: 2.000 mm, height: 350 mm external dimensions: total lenght (without lifting) 23.400 mm Width 4.354 mm, Height 3.638 mm, weight approx. 30 t Lifting device: L 1.773 x W 4.214 x H 6.278 mm, approx. 4t Return transfer: L 23.355 x W 3.260 x H 2.678 mm, approx. 6.5t furnace heating: Zone 1 - zone 5: each 3 x 80 KW Gas Zone 6 - zone 10: each 9 x 8 KW Electrical Total power consumption: electrica ...

Category: 302: extruders
approved
dealer
New in: 2014
Price: request quote
Location: Wuppertal nähe Düsseldorf
Seller: PLASTICO TRADING GmbH & Co.KG

Drive: 132 kW screw size: 72 mm screw length: 44 L/D material: TPE, PP, PA, PET div material Capacity: 500 kg/h twin-screw compounding line incl. 2 x side feeder, degassing, screen changer, strand, waterring or underwater pelletizing system The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: 106: presses
approved
dealer
New in: 1987
Price: request quote
Location: DE-78234 Engen
Seller: ProdEq Trading GmbH

pressure: t distance between columns: mm stroke: mm --------------------------------------------------: PRESS DESIGN: - drive system: hydraulic: - openings in uprights: no: - number of suspensions: 2 - number of slide actions: 1 - slide ejectors / cushion: no: - table cushion: yes: - opening in table: no: - quick die change system: no: PRESS FORCES: - total force (nominal): 1000 to PRESS TABLE: - table surface (left-right): 2500 mm - table surface (front-back): 1500 mm - thickness of bolster plate: 140 mm - height above floor level: 300 mm SLIDE: - stroke: 1250 mm SLIDE (HYDR. PRESS): - approximation velocity max.: 300 mm/s - working velocity min.:  ...

Category: 302: extruders
approved
dealer
New in: 2014
Price: request quote
Location: Wuppertal nähe Düsseldorf
Seller: PLASTICO TRADING GmbH & Co.KG

screw size: 72 mm Capacity: 700 kg/h Drive: 132 kW L/D: 44 L/D twin-screw compounding line incl. 2 x side feeder, degassing, screen changer, strand, waterring or underwater pelletizing system The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: 1403: other storage equipment
approved
dealer
New in: 1992
Price: request quote
Location: Land-de Germany, 47877 Willich - Neersen
Seller: Markus Hirsch GmbH

weight max. in kg: 2500 kg stroke: 3200 mm fork length: 1000 mm Drive: Gas Side shift: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: 4,25 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: 1102: engines
approved
dealer
New in: used
Price: 5.044 €
Location: Land-de DE 47608 Geldern, Nordwall 39
Seller: ONERGYS GmbH

Category: 109: other metal working machines
approved
dealer
New in: 1996
Price: request quote
Location: Deutschland
Seller: Markus Hirsch GmbH

Capacity: 3000 kg Production capacity: 1500 kg/h degree: 1200 °c heating capacity: 1700 kcal/KW total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: 1101: power generators
approved
dealer
New in: 1997
Price: 2.000.000 €
Location: Land-il IL
Seller: Meco ltd.

Complete Late Model Power Generation Plant For Immediate Sale Plant Consists of (4) Identical 1997 6.5MW Generator Sets Using WARTSILA VASA 18V32 LN Diesel Engines as Prime Movers Driving ABB HSG 900XS8 Type Generators Generating 26MW Total Electrical Power Including but not limited to the following Systems: Electric, Fuel, Lubricating Oil, Starting Compressed Air, Control Air, Cooling Water, Charge Air & Exhaust Gas, Flew Gas Washing, Steam, Fire Alarm & Fire-Fighting Systems Station Nominal Output: 26 MW Generator Nominal Output: 8,125 kVA Generator Voltage: 11KV+- 5% Frequency: 50 Hz Auxiliary Voltage: 415 V AC, 110 V DC Fuel Type: Heavy Fuel Oil (HFO)/Diesel  ...

Category: 905: other agricultural machines
approved
dealer
New in: used
Price: request quote
Location: Deutschland
Seller: Markus Hirsch GmbH

Number of Ploughshares: 6 St working width: 3000 mm Dimension of ploughshares: 500 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: 1101: power generators
approved
dealer
New in: 2006
Price: request quote
Location: Land-nl NL Heinenoord
Seller: Wermers Consultancy

genset included TEM evo control panel, main gas line, optional exhaust gas heat exchanger, gas optional exhaust cleaner Hanwel brand, optional silencer, optionally oiltank fresh and old. allrelated documentation.

Category: 108: welding machines
approved
dealer
New in: used
Price: request quote
Location: Willich
Seller: Markus Hirsch GmbH

current intensivity: 450 A total power requirement: 0 kW weight of the machine ca.: 0,3 t dimensions of the machine ca.: 1x0,5x0,8 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: 1101: power generators
approved
dealer
New in: 2007
Price: request quote
Location: Land-nl NL 4101w Culemborg, Moerbeiboom 7
Seller: Wermers Consultancy

genset included TEM evo control panel, main gas line, optional exhaust exchanger exhaust heat, optional first and second silencer and chimney, optionally oiltank fresh and old, all related documentation.

Category: 109: other metal working machines
approved
dealer
New in: 2007
Price: request quote
Location: ab Standort
Seller: Teutenberg Maschinen GmbH & Co.KG

degree: 1100 internal dimension: L1800, B1800, H2125 mm Electric capacity: 150 kw BELL TYPE FURNACE Maximum operating temperature : 1100 °C Electrical power : 150KW Furnace power : 400V/ 50Hz 150KW Thermo elements: Ni-Cr-Ni 90.1101 300-400mm with flange adapter Heating groups: 1 group Heated sides: 4 sides Gas supply: Argon protective gas Work platforms: 2 platforms Weight of the hood: ca. 2000 Kg Isolation: ceramic fibre Density: 150-300Kg/m³ Layer thickness: 225mm (special Temp. 1260°C) Dimensions: 2350 mm X 2350 mm X 2500 mm L x W x H Chamber dimension: L=1800mm W=1800mm H=2125mm The furnace is in a very good condition. Dismantling of the machine to be borne by the buy ...

Category: 1101: power generators
approved
dealer
New in: 2006
Price: request quote
Location: Land-nl NL Boonsweg 18, Heinenoord
Seller: Wermers Consultancy

Gene set included TEM evo controlpanel Main gas line, circuit breaker, exhaust heat exchanger and condensor, silencers, oil tank fresh and old, all related documentation, sound enclosure for inside.

Category: 104: grinding machines
approved
dealer
New in: 1975
Price: request quote
Location: Nürnberg
Seller: Johann Kleinlein Werkzeugmaschinen GmbH & Co.KG

ampere: 4 - 250 A current capacity: 12,50 kVA welding current: max. 210 / 250 A total power requirement: kW weight of the machine ca.: 0,40 t dimensions of the machine ca.: 1,50 x 0,75 x H1,10 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: 1101: power generators
approved
dealer
New in: 1998
Price: 100.000 €
Location: Land-uk UK 0 LONDON, 27 Old Gloucester Street
Seller: Gas Engine Exchange Ltd

Gas: Natural Gas Age: 1998 Hours: 14,000 Capacity: 2MW General Condition: Engine has been boroscoped, internal condition is good and the engine turns over easily. Scope of Supply: Engine, Alternator, Cooling Systems, Pipe Line, smoke exhaust system, Jenbacher Control Panel.

Category: 108: welding machines
approved
dealer
New in: 1975
Price: request quote
Location: Nürnberg
Seller: Johann Kleinlein Werkzeugmaschinen GmbH & Co.KG

ampere: 220 A current capacity: 5,60 kVA welding current: 170 / 220 A total power requirement: kW weight of the machine ca.: 0,20 t dimensions of the machine ca.: 1,20 x 0,50 x H1,00 m MIG/MAG protectiv gas welding machine The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: 1300: other machines and plants
New in: 1974
Price: request quote
Location: Land-de DE NRW
Seller: Christoph Sattler

Gas turbine Manufacturer: BBC Setting into operation: 10/1974 Hours of operation: 2733 Normal startup: approx. 2800 (2742-13.09.2011) QuickStart: approx. 19 Turbinenein - and outlet temperature: 13.0 445,0 gas amount: 3800 m ³/h Gas pressure: 13.8 bar Water injection: 6.6 m ³/h Water pressure: 50 bar Generator gas turbine Performance: 63.7 MW / 3000 rpm Power: 3515 A Voltage: 10.7 k. Revisions per year by the the company Alstom Power Service GmbH until November 2012 detectable. Repair bucket damage 16.06.2009 amounting to â?¬5.368.239,24 Implementation A - inspection 2012 amounting to â?¬18.147,50 Shovel carrier GT levels: 3,4,5 New delivery turbine r ...

Category: 108: welding machines
approved
dealer
New in: used
Price: request quote
Location: Dreieich
Seller: KIRCHGEORG Werkzeugmaschinen GmbH

current intensivity: 240 A wire-forward-feed: 1,2 - 18 m/min voltage: 380 V total power requirement: 8,5 kVA weight of the machine ca.: 117 kg dimensions of the machine ca.: 0,70 x 0,40 x 080 m - serial-no.: 10780073 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

You didn't find your wanted machine? send wanted inquiry to all dealers (no registration necessary)