1 mw gas used for sale

The scope of delivery includes: 01x Grating, used Material color: hot-dip galvanized Total depth: 990 mm (support rod direction) Total width: 1,195 mm (crossbar direction) Support rod diameter: 40/2.0 mm Frame height: 40 mm Mesh size: 100 x 100 mm Weight: approx. 11.07 kg | Pcs. Internal designation: L Note: Isq02ga - The frame was flanged inwards from all sides. - The gratings can be damaged, scratched, dented, Welding, etc. show. General information about the item: This item is offered for pickup only. In addition, a desired transport or shipment of this article is with additional costs, which are charged separately depending on the place of delivery. or scope of delivery can be queried from us.

Built in 1989 Size max 320 x 400 mm Size trimmed max 305 x 380 mm Size trimmed 100 x 125 mm Product thickness max 80 mm min 6 mm Speed max 6.000 c/h Feeding height max 80 mm Equipment o infeed from the right side o automatic infeed with integrated pre stacker o cut counter o Equipment for sheet-fed o 1 set of clamping plates and holders o 3 sets of cutting sticks o 2 set of knives o external knife changing device o central lubrication o belt delivery

The scope of delivery includes: 01x Grating, used Material color: hot-dip galvanized Total depth: 995 mm (support rod direction) Total width: 1,190 mm (crossbar direction) Support rod diameter: 40/2.0 mm Frame height: 40 mm Mesh size: 100 x 100 mm Weight: approx. 11.44 kg | Pcs. Internal designation: K Note: - The frame was flanged inwards from all sides. - The gratings can be damaged, scratched, dented, Welding, etc. show. General information about the item: This item is offered for pickup only. In addition, a desired transport or shipment of this article is with additional costs, which are charged separately depending on the place of delivery. or scope of delivery can be queried from us.

Semico screw pump +booster Manufacturer: Busch Type: Cobra DS1000E Status: good condition, last factory overhaul at Busch 6 months ago! Performance: without delivery time: ex stock

The scope of delivery includes: 30x gratings, used Material color: hot-dip galvanized Total depth: 990 mm (support rod direction) Total width: 1,195 mm (crossbar direction) Support rod diameter: 40/2.0 mm Frame height: 40 mm Mesh size: 100 x 100 mm Weight: approx. 11.07 kg | Pcs. Weight / pallet: approx. 360.00 kg Internal designation: L Note: - The frame was flanged inwards from all sides. - The gratings can be damaged, scratched, dented, Welding, etc. show. - The above price is only valid if a complete range of 30 pcs. General information about the item: This item is offered for pickup only. In addition, a desired transport or shipment of this article is with additional costs, which are charged separately depending on the place of delivery. or scope of delivery can be queried from us.

Semico screw pump + booster Manufacturer: Busch Type: Cobra DS1000E Status: good condition, last factory overhaul for Bush months ago! Warranty: without Delivery time: In stock

Dear's sale, Wartsila 16v25 engine complete spare parts inc block and cranksaft full cover, piston, liner, conrod, fuelpump etc... built 1997 brgds Hakan KUSCU info@kscege.com

The scope of delivery includes: 30x gratings, used Material color: hot-dip galvanized Total depth: 995 mm (support rod direction) Total width: 1,190 mm (crossbar direction) Support rod diameter: 40/2.0 mm Frame height: 40 mm Mesh size: 100 x 100 mm Weight: approx. 11.44 kg | Pcs. Weight / pallet: approx. 370.00 kg Internal designation: K Note: - The gratings can be damaged, scratched, dented, Welding, etc. show. - The above price is only valid if a complete range of 30 pcs. General information about the item: This item is offered for pickup only. In addition, a desired transport or shipment of this article is with additional costs, which are charged separately depending on the place of delivery. or scope of delivery can be queried from us.

Manufacturer _ BONGIOANNI Model_ 1300 Features_ ARTIGLIO Carriage with 5 hydraulic clamping; Hydraulic Advancing; Chain Loading at 4 ways with hydraulic arms; Unloading Rollers System; Reverse Feeding Chain; Grinder manufactured by Vollmer.

Te Coop: Labom Druk transmitter CE 1110 Druk 0-25 bar

Technical data for the Tiefensteg: Manufacturer: SSI Schaefer The scope of delivery includes: 01x Tiefensteg, used Material colour: grey Total length: approx. 1,108 mm f. column depth: approx. 1,100 mm Clear span: approx. 999 mm Truss support: approx. 55 mm Profile dimensions: CS 190 x 75 x 13 mm Material thickness: approx. 2.00 mm Weight / pcs.: approx. 8,020 kg Your contacts in our company: Mr. Andre Evering Mr.: Mario Klöver Lord: Falk German General information about the item: This item is offered for pickup only. A transport that is also desired or a shipment of this article is associated with additional costs, which separately depending on the place of delivery or scope of delivery.

Kervenfräse (carpentry): The machine is almost as good as new, and there is also a warranty on the machine! Technical data "MAFELL Kervenfräse ZK 115 EC": -) Smoothing depth: 0-83.5 mm ) Milling tool - standard: 150 x 115 mm mm -) Swivelling range: 0-60 ° -) Nominal no-load speed: 4050 1/min -) Rated power: 3000 W ) Weight (with standard milling head): 21.1 kg ) Universal motor: 230 V / 50 Hz Scope of delivery: 1 Kervenfräskopf, complete, Ã? 150 x 115 mm 1 RIP fence 1 spanner 10 mm 1 wrench, Torx T-15 1 connection cable 10 m

MIAG Ventilator/Fan HRBW S09-1000 130 m³ / min 1000 mm water column 50 kw Intake of 300 mm x 400 mm With continuous shaft, front and rear bearings Inlet from top, outlet diameter 360 mm The unit has been cleaned. We have many different fans from 28 kw to 90 kw output. We are looking forward to your inquiry!

Radial drilling machine. Drlling capacity: 40-50mm. Arm of 1250mm. Taper Morse 5.

Marcel Spiedo 1200 Machine Spiedo 1200 produces a high quality product which is kebab. The skewers are perfect in every way, ensuring high quality and handmade appearance. The machine is equipped with two drums to load meat, receiving the tape (200 mm) trolley for example: the additional tools (1750 x 690 x 620 mm) Specification: Brand: Marcel Spiedo Model: 1200 Unit size: 1490 x 1050 x 2600 (mm) Weight: 500 kg Power supply: 400V 50 Hz 3N Total power: 0.5 kW Made of stainless steel

From exposition Quick handling with with efficient electro - hydraulic pump. Places the load in the comfortable and ergonomically correct working position. Automatical activation of adjustable stabilizers when lifting higher more than 400 mm. Provided with bartery power level indicator. Polyurethane wheels. Supplied weith single piston rod. Can also be operated manually. Lifting speed with / without load: 19 /15 sec. Capacity: 1000 kg. Lifting height: 800 mm. Steering wheel diameter: 180 mm. Fork wheels diameter: 75 mm. Truck weight: 169 kg.

Machine type: TIG inverter welding system gas-cooled direct current system Make Eurotronic Type TIG 1501 - DCi Connection voltage 1 x 230 volts Setting range 5 – 150 amps Duty cycle 35 % d.c. at 150 amps 60% d.c. at 120 amps 100% d.c. at 100 amps Current adjustment infinitely variable max. weldable material thickness 4 mm Cooling inverter by built-in fan Cooling burner gas-cooled Portable assembly line design Fuse 16 amps Dimensions L x W x H 400 x 170 x 250 mm Weight 9 kg Age approx. 10 years Condition workshop-tested, very good, incl. UVV test protocol Scope of delivery welding system with the following accessories: 1 piece ME-TIG burner TH 161 G, 4 m 1 piece ground cable 1 piece pressure reducer with 2 pressure gauges 1 pair of TIG gloves 1 piece spare parts box cpl. Equipped 12 Months Warranty 1 Piece Instruction Manu ...

Spare parts for Tischbohrwerk VO / Stankoimport / Gertner, Fuhrmeister & CO E.g. complete spindle SK50 Ball screw spindles from the three axes Electric motors, 3 x feed motor, spindle motor complete control Siemens or control cabinet Control Panel with digital device Glass scales Detachable faceplate diameter 360 mm Radial movement of the faceplate-support 100 mm Converter / transformer Angle drilling head Dividing head Spindle diameter ø 110 mm tool holder ISO 50 Technical data of the original machine Travel along approx. 1.000 mm cross travel approx. 1.600 mm of vertical stroke 1,000 mm Longitudinal movement of retractable spindle 710 mm Speed range 10-1,250 RPM Main engine 11kw Speeds 10-1,250 RPM in 22 gear stages Extensive documentation of machine including operating instructions, description, electrical documentation, etc. More photos on request

APV Homogenizer LAB 100 Ball valves Technical data see also pictures: Type: 100-6 TBS Capacity: 100 LTR. / h Engine: 2.2 KW

Bolt feeders Manufacturer: Tucker Type: BV 50D.00.44/5.18F8 and BV 50D.10.01/5(12-25) There are 2 pieces. The price is for 1 PCs.

Repair and Exchange service Repair and replacement service SERVICE MAZAK MITSUBISHI NETZTEIL POWER SUPPLY MDS-A-CV-110 – Repair price depending on the effort. Max. 1400 – € Through our Mazak machine simulators, we are able to test almost ALL Mazak Mitsubishi power supplies under load. Long-term tests are also possible. We repair your Mazak Mitsubishi power supply at a flat rate or at cost. The amount of work is about 1-3 days. Urgent repairs are also possible. The warranty on the repair is 6 months. Repairing other power supplies on request If you are interested in our articles or have any questions, please contact us beforehand by phone or email.

Projection welding machine Year of construction: 1979 Manufacturer: Roth electric Type 126 P 125.4 Rated current at 50% ED: 16.0 kA Rated output at 50% ED: 160 k Nennspennung: 380V/50 Hz All information without guarantee

Repair and Exchange service Repair and replacement service SERVICE MAZAK MITSUBISHI NETZTEIL POWER SUPPLY MDS-A-CV-150 – Repair price depending on the effort. Max. 1400 – € Through our Mazak machine simulators, we are able to test almost ALL Mazak Mitsubishi power supplies under load. Long-term tests are also possible. We repair your Mazak Mitsubishi power supply at a flat rate or at cost. The amount of work is about 1-3 days. Urgent repairs are also possible. The warranty on the repair is 6 months. Repairing other power supplies on request If you are interested in our articles or have any questions, please contact us beforehand by phone or email.

Claw vacuum pump Compressing dry Manufacturer: Busch Type: Mink MM 1502 AV Engine: DS 400V Suction capacity: 500 m ³/h Discharge pressure: approx. 200 mbar (abs.) Accessories: inlet filter; Operating instructions Delivery time: Please enquire; ready for operation

Rotary vane vacuum compressor - dry running Manufacturer: Becker Type: KVT 3.100 Engine: 400V status: rebuilt and new painted Warranty: 12 months; ready for operation

Repair and Exchange service Repair and replacement service SERVICE MAZAK MITSUBISHI NETZTEIL POWER SUPPLY MDS-A-CV-185 – Repair price depending on the effort. Max. 1400 – € Through our Mazak machine simulators, we are able to test almost ALL Mazak Mitsubishi power supplies under load. Long-term tests are also possible. We repair your Mazak Mitsubishi power supply at a flat rate or at cost. The amount of work is about 1-3 days. Urgent repairs are also possible. The warranty on the repair is 6 months. Repairing other power supplies on request If you are interested in our articles or have any questions, please contact us beforehand by phone or email.

Claw vacuum pump Dry Manufacturer: Busch Type: Mink MM 1322 AV Engine: DS 400V Suction power: 300 m ³/h Discharge pressure: approx. 150 mbar (abs.) Warranty: 12 months Condition: Near Mint Accessories: inlet filter; Operating instructions Delivery time: in the short term; ready for operation

Helium leak detector Manufacturer: Leybold Type: UL 100 Condition: Tested and ready to use Version: Oelgeschmierte pump Connection: 230V Time of delivery: 1 where. (u.ue.V.; ready for operation

Claw vacuum pump Compressing dry Manufacturer: Busch Type: Mink MM 1402 AV Engine: DS 400V Suction power: 400 m ³/h Discharge pressure: approx. 200 mbar (abs.) Accessories: inlet filter; Operating instructions Delivery time: Please enquire; ready for operation

Loeser KS 350 Contact belt grinding machine (conventional) grinding belt length 3500 / 4000 mm x 50 mm motor 3.5 / 4 kW n

Repair and Exchange service Repair and replacement service SERVICE MAZAK MITSUBISHI NETZTEIL POWER SUPPLY MDS-A-CVE-110 – Repair price depending on the effort. Max. 1400 – € Through our Mazak machine simulators, we are able to test almost ALL Mazak Mitsubishi power supplies under load. Long-term tests are also possible. We repair your Mazak Mitsubishi power supply at a flat rate or at cost. The amount of work is about 1-3 days. Urgent repairs are also possible. The warranty on the repair is 6 months. Repairing other power supplies on request If you are interested in our articles or have any questions, please contact us beforehand by phone or email.

Rotary vane vacuum pumps lubricated Manufacturer: Becker Type: U5. 100 Suction power: 100 m ³/h Discharge pressure: 0.1 mbar (abs.) Including: Gasbalast, oil filter Status: Demo Warranty: 12 months Delivery time: In stock; ready for operation

Loeser KS 350 Belt grinding machine (conventionel) Beltlength 3500 / 4000 mm x 50 mm Motor 3,5 / 4 kW; cleaned and ready for operation

Repair and Exchange service Repair and replacement service SERVICE MAZAK MITSUBISHI NETZTEIL POWER SUPPLY MDS-A-CVE-150 – Repair price depending on the effort. Max. 1400 – € Through our Mazak machine simulators, we are able to test almost ALL Mazak Mitsubishi power supplies under load. Long-term tests are also possible. We repair your Mazak Mitsubishi power supply at a flat rate or at cost. The amount of work is about 1-3 days. Urgent repairs are also possible. The warranty on the repair is 6 months. Repairing other power supplies on request If you are interested in our articles or have any questions, please contact us beforehand by phone or email.

Roots pump booster pump Manufacturer: Busch Type: Puma WP 1000 D2 Status: used, tested A complete overhaul can be offered as an alternative. Then with 12 months warranty on the device.; ready for operation

Balzers BAK 1050 on the photos to see evaporation Chamber. If you have technical questions, I ask for a request.; ready for operation

Repair and Exchange service Repair and replacement service SERVICE MAZAK MITSUBISHI NETZTEIL POWER SUPPLY MDS-A-CVE-185 – Repair price depending on the effort. Max. 1400 – € Through our Mazak machine simulators, we are able to test almost ALL Mazak Mitsubishi power supplies under load. Long-term tests are also possible. We repair your Mazak Mitsubishi power supply at a flat rate or at cost. The amount of work is about 1-3 days. Urgent repairs are also possible. The warranty on the repair is 6 months. Repairing other power supplies on request If you are interested in our articles or have any questions, please contact us beforehand by phone or email.

Rotary vane vacuum & compressor - dry running Manufacturer: Becker Type: DVT 3.140 and DVT 3.100 Engine: 400V DS Suction power: 100-140 m ³/h Discharge pressure / vacuum: Optional +-0.5 bar / +-1 bar / +-1.5 bar Status: Demo Warranty: 12 months; ready for operation

The BTS-1100 Bin Compactor is ideal for material compacting in your 1100 Ltr. garbage and recycling wheelie bins. Large bulky rubbish, but also cardboard and recyclable materials can be compacted easily and safe to a minimum of its size. By compacting these waste and recyclable materials you achieve a volume reduction of up to 80%, a significant saving on your disposal costs and you also create a safe and clean working environment. Pressing force: 3.5 Ton Compaction: up to 80 % (material depending) Machine size: 2120 H x 1160 W x 1150 D mm Machine weight: 270 kg Transport height: 1594 mm Cycle times: 20 seconds Motor: 1.5 kW 13 Amp Power supply: 220 - 240 V (1 phase) Noise level: 68 dB User-friendly and safe two hand lever control Optimum utilization of garbage bins Reduces the number of waste bins No more climbing into wheelie bins Reduces frequency of  ...

Manufacturer: Bush type: mink MI 1502 BP Motor: 18,5 KW; DS 400V status: used, without Warranty: 6 months Flow rate: 500 m ³/h discharge pressure: + 1,2 bar Accessories: additional intake filter (changed); Manual delivery time: approx. 1-2 where.; ready for operation

Refrigerant filling and service system Manufacturer: Agramkow Type: RHS 1280 year of construction: 2010

Repair and Exchange service Repair and replacement service SERVICE MAZAK MITSUBISHI NETZTEIL POWER SUPPLY MDS-B-CV-110 – Repair price depending on the effort. Max. 1400 – € Through our Mazak machine simulators, we are able to test almost ALL Mazak Mitsubishi power supplies under load. Long-term tests are also possible. We repair your Mazak Mitsubishi power supply at a flat rate or at cost. The amount of work is about 1-3 days. Urgent repairs are also possible. The warranty on the repair is 6 months. Repairing other power supplies on request If you are interested in our articles or have any questions, please contact us beforehand by phone or email.

Smicon PT 1500 Fumigation / Fumigation System In a fumigation, a room is flooded with a poisonous gas to fight pests / bacteria. Because they are toxic gases, special safety measures are required. Fumigations are common in the storage of organic materials (eg grain storage, in warehouses of harbors, silos, mills), in addition, in churches to control the woodworm. It is a device which is used for the disinfection of rooms. Formaldehyde is boiled on the left-hand cooking plate and placed in a stream of air in a room together with condensed water (right hearth) to kill all the bacteria. Former list price 9.900EUR

Make: KÜBA Type: SGK 153 Slats distance 10mm Length: 4200mm Volume: 161.20 l Power approx.80KW at minus 40C foldable with insulated drip fir with 3 fans WOODS, total power 6300 watts for shock frost 2 pieces available Info: 0043-6641838175 or info@frigocom.at Price on request

Repair and Exchange service Repair and replacement service SERVICE MAZAK MITSUBISHI NETZTEIL POWER SUPPLY MDS-B-CV-150 – Repair price depending on the effort. Max. 1400 – € Through our Mazak machine simulators, we are able to test almost ALL Mazak Mitsubishi power supplies under load. Long-term tests are also possible. We repair your Mazak Mitsubishi power supply at a flat rate or at cost. The amount of work is about 1-3 days. Urgent repairs are also possible. The warranty on the repair is 6 months. Repairing other power supplies on request If you are interested in our articles or have any questions, please contact us beforehand by phone or email.

Qty. 1 Second-hand Powder coil coating line on aluminium strip 1500 mm wide Mfc.: TBA Built: 1991 Coating thickness: 60 microns Revamped by OTEFAL in 2003 Powder booth changed in 2011 – GEMA Coil coater for the pre-treatment changed in 2013 Degreasing section re-built in 2010 – OTEFAL Electrical device changed in 2006 Strip width: 800 - 1500 mm Strip thickness: 0.8 – 2.0 mm A wide range of colors - over 300 different shades Capacity: 9000 tons/year in 3 shifts work 5/7 Days so 2 000 000 m² Spool dia.: 508 or 610 mm Outside coil dia.: 1500 mm Average speed: 7.5 m/min.

LEYBOLD pump stand consisting of: Pump 1 LEYBOLD Sogevac SV 300 (optional with water cooled or air cooled) pump 2 LEYBOLD Ruvac WAU 1001 H Each pump or the entire frame can be readmitted. A warranty is a complete overhaul of 12 months. Multiple racks, versions available!; ready for operation