126,737 used machines on RESALE, but how to find them? Machine Search
used
Qty. 1 Second-hand strip rewinding machine Mfc.: IHI Built: 8/1968 Material to be rewonded: aluminium, aluminium alloys Foil thickness max.: 500 ?m Foil width max.: 1,150 mm / min. 800 mm Coil size max.: 1,950 mm (outside dia.) / 300 mm (inside dia.) Max. weight: 9,000 kg Speed: 150m/min.
Original Charge air radiator cooler for MTU diesel engine type 16V2000G25 (3B)
Korimat KA 160 autoclave, 120 liters, 2.5 bar, mc control, as an autoclave for sterilizing including the measuring of the core temperature, as a rapid pressurized boiler for cooking meat, vegetables, soaps, and ready-to-serve meals, electrically heated, smooth surface. You are very welcome to test the machine in our facility in Koblenz, Germany.
Metallography Mounting presses ECOPRESS All ECOPRESS presses can be programmed by the user in a simple manner, that the mounting process runs fully automatically. When the ECOPRESS 50, one program can be stored in the control electronics. A rugged bayonet allows quick and safe operation. The ECOPRESS series offers a wide variety of different size of molds of 25 - 50 mm in diameter. At the same time two samples can be embedded per cylinder with an intermediate piston. Alternatively, machine type of ECOPRESS 200 twin-piston for up to at the same time 4 embeds is available. When baked in the samples into plastic granules are melted, that the sample under heat and high pressure wraps pore-free and then through a press cylinder, electronic control, integrated cooling for solidifying. ECOPRESS 50 one cylinder, electronic control, full automatic program ECOPRESS 100 one pressing ...
Rühle Tumbler MKR 150, with vacuum, mixing- and scraping arm, container size 150 liters, adjustable Touch-PC control, direct cooling by strong cooling unit, mixing and kneading, up to 50 rounds per minute, all stainless steel, comfortable emptying of the goods by standard carriage size. You are very welcome to test the machine in our facility in Koblenz, Germany.
new
overhault cylinder-head CAT 3116 DIT without valves 1.995,-, with new valves + spring 2550,- MIW GmbH Motoren-Instandsetzungs-Werk GmbH Nord-West-Ring 8 D-27404 Zeven phone:0049(0)4281 950583 Fax: 0049(0)4281-950585 info@miw-zevende
We offer you here a used workbench frame of the manufacturer Jung Heinrich for sale. Workbench depth: 1,000 mm Technical data on the workbench frame: Manufacturer: Jung Heinrich Type: Esmena The scope of delivery includes: 02x workbench stand, used Material color: dark green or blue Stand profile: 76.2 x 74.7 mm Stand height: 900 mm Stand depth: 1,000 mm Incl. transverse and diagonal struts, Footplates The stands are pre-assembled ( screwed half-timbering ) 02x workbench traverses, used Material color: orange Box profile: 85 x 40 mm clear width: 2,775 mm 04x locking pins, used Version: completely galvanized The images serve to illustrate the material. The material color may differ if necessary. - The workbenches are picked unassembled; - The workbench stands are pre-assembled; - The production time is usually about 3 - 5 ...
used
Complete Line Consisting of 1.Sheet material unwind station (let off stand) 2. Iddon 1320mm x 450mm dia wide 4 roll inverted L calender manual nip adjustment, even speed gears, auto lubrication system with 45kW AC right angle drive motor and gearbox, Steam heated bowls up to 150c Bowl temperature monitoring system, fabricated bedplate. Overhauled in 2007 (by Iddon) with new side frame and rolls precision ground 3. Edge Trim - make: Mario Cotta 4. Guillotine - Make: Pasquato SNC 5. Wind up
Tip height: 130 mm Top width: 450 mm Rotational speed: approx. 55-3000 rpm Pneumatic clamping system Spindle nose: W 25 Div. W25 collets available Div. holder available BERGER LAHR axis motors Combitec EIP E-500 control Manual control available Coolant system available Machine lamp available Machine feet available Dimension (Lxwxh): approx. 1400 x 560 x 1230 mm Weight: approx. 550 kg The machine is located in a clean good condition!
The LVD EHT DELTA 1250 RS TK turret punching machine was built in 1999. It is equipped with a MNC 32000 CNC control. The punching machine has a maximum pressure of 20 tons and allows the processing of a sheet with dimensions of 1250×1250 mm and a thickness of 4.5 / 6 mm. The machine performs a maximum of 650 beats per minute. The press is equipped with a hydraulic system, a turret with four stations (A, B, C, D) and a clearance adjustment sensor G8823142. Technical parameters: – CNC control: MNC 32000 – maximum pressing force: 20 tons – sheet dimensions X x Y: 1250 x 1250 mm – sheet thickness: 4.5 / 6 mm – maximum number of strokes: 650 1 / min – rated number of strokes: 300 1 / min – oil tank: 200 L – total power: 18.7 kW – engine: 11 kW – voltage: 400 V – weight: 17 tons Hydraulic System – Thick Turret: – instrumentation: station A, B, C, D ...
Make: WOLF Type:Climate aggregate Power: 75 kW Refrigerant R407C Volume: for a ventilation system of 12,000 m2/h Built: 1999 2 pcs. compressors Make: Maneurop Complete unit including condenser, collector and switch box. Distributed in two circles of 50/50% each Price 3800,- More information can be found on our abc.frigocom.at page or via e-mail on info@frigocom.at
new
sheet width: siehe TD mm plate thickness: siehe TD mm distance between columns: siehe TD mm pre-bending: siehe TD total power requirement: 3 kW weight of the machine ca.: 1,06 t dimensions of the machine ca.: 1260 x 1350 x 1900 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Working width: 1800 mm Roller width: 2000 mm Capacity appr.: 20 m Housing from: Edelstahl Guide rollers - dia: 127 mm Weight: 850 kg Dimensions (LxWxH): 0 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
K+G Wetter D 114 Typ 409 mixer automatic grinder, 114 mm hole plate diameter, almost completely made of solid stainless steel, mixing unit with mixing-worm and paddle-mixing-shaftmain switch and electric control integrated in machine housing, performance max. approx. 2,400 kg/h, hopper capacity approx. 110 liters, electrically interlocked safety grid for hopper. You are very welcome to inspect and test the machine in our facility in Koblenz, Germany.
pressure: 110 t : Ø 40x20 mm throat: 500 mm engine output: 9 kW no. of strokes: 28 Hub/min stroke max.: 80 mm weight: 3150 kg Accessories / equipment: - punching table The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
roll diameter: 400 mm roll length: 1000 mm rolls drilled: peripher Nip adjustment: hydraulisch total power requirement: 2x 30 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
power capacity: 0,38 kW volt: 174 V ampere: 3,3 A total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Vakona ESK 125 Tumbler, vacuum mixing and tumbling machine, the machine comes with tumbling arm and mixing arm, container size 125 liters, MC control, direct cooling by strong cooling unit, mixing and kneading, all stainless steel. You are very welcome to inspect and test the machine in our facility in Koblenz, Germany.
Working width: 630 mm Working height: 3,300 mm Motor output: 7,5 kW Number of knives: 4 St. Feed speed: 7 + 14 m/min. loading dimensions L x W x H: 1070 x 1200 x 1060 mm weight: 1050 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 8 St. range L-W-H: 720 x 580 x 1000 mm weight: 128 kg : 100Kg je Lade The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
The vertical milling center FADAL VMC 15XTL was manufactured in 2007 in the United States by the FADAL brand. The machining center is digitally controlled by Fadal. It has a table size of 870 x 400 mm. The milling machine is designed for processing materials weighing up to 340 kg. It is equipped with a magazine for 21 tools. The spindle speed of the machining center, on the other hand, reaches 7500 rpm. Technical parameters of the FADAL VMC 15XTL CNC milling machine - CNC control: Fadal - working table length: 400 mm - working table width: 870 mm - maximum table load (evenly distributed): 340 kg - number of tools in the magazine: 21 pcs. - spindle drive power: 5.6 kW - maximum rotary speed of the vertical spindle: 7500 1 / min. - minimum distance between the spindle and the table: 101.6 mm - maximum distance between the spindle and the table: 609.6 mm - travel length in th ...
Tip height 102 mm Top width 450 mm Leit.-/ spindle Collets W20 available Rotational speed: approx. 210 3000 rpm Reduction gear Links.-right rotation 2-stage drive L x W x H: CA. 1760 x 595 x 1230 mm Weight: approx. 650 kg
SOLD! ABC ENGINE 8XDXC 886KW @ 750 RPM diesel engine ABS BJ 2002
screw ø:: 120 mm screw length:: 17D screw speedl:: 42 U/min drive power:: 138 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
machine measurements: 3.000 mm machine weight: -- kg power capacity: 90 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
roll diameter: 400 mm roll length: 1100 mm rolls drilled: Kernbohrung Nip adjustment: hydraulisch total power requirement: 2x 30 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 1800 mm efective widths: je 400 mm length in total: 2000 mm length in width: je 500 mm carrying capacity: je 3000 kg material: Aluminium weight: je 33 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
angle steel/side length: unbkt, mm double T-iron on the x-axis: unbkt. mm U-iron on the x-axis: unbkt. mm total power requirement: 11 kW weight of the machine ca.: 3,36 t dimensions of the machine ca.: 1175x1340x1650 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Vacuum stuffer Handtmann VF 100, vacuum filling machine for filling, portioning, linking, loading device, mc control, body all stainless steel, filling performance 3000 kg/h, pressure up to 55 bar, 420 port./min. You are very welcome to test the machine in Koblenz, Germany.
The starting relief and safety valves are available in various sizes.
maximum number of results exceeded
please refine your search
