1 mw gas used for sale

used chamber filter press / filter press used chamber filter press / filter press Passavant 1200 x 1200 record size: 1200 x 1,200 mms benefit length: 4,000 mms record number: 68 cake thickness: 30 mms filter pressure: 15 cash Schliessdruck: 350 cash record material: PP records expiry: unanimously engine tension: 380 volts / 50 hertz record transport: automatically filter cloths: optionally

Used rubber extruder make Troester, type GSV 60/k-12-18D-m.S., Execution as desired, with or without vacuum Built in 1991, machine was in operation until the beginning of 2010 Feed roller Kpl. new drive with flat gear motor Screw speed max. 62 rpm. Engine power 22 kW Control with PLC and temperature control new on request Extruder similar to attached photos.

Cast T-slot plate 1500 x 950 mm

Used Troester rubber extruder type GSV 60/k-12-18 D with feed roll can be modified/overhauled according to customer\s specification, with or without vacuum, year of construction: 1991 machine was in operation until end of 2010. including feed roll, new drive with flat-gear motor screw speed: maximum 62 rpm motor power: 22 kW PLC control and TCU can be renewed, if requested.

Injection pump F & M - see picture

Maximum format: 1060 x 770 mm Min. format: 450 x 370 mm max punch format: 1050 Ã? 750 mm Maximum format of embossing: 1050 Ã? 750 mm gripper margin: 8-17 mm paper weights: 90-2000 g / m2 (carton) 0.1-2 mm (box)? 4 mm (corrugated board) maximum punching force: 300 T Maximum speed: 7500 sheets per hour Max marking speed: 6500 sheets / hour individually heated zones: 12 heated zones (each zone can be heated independently up to up to 200 degrees) Max Folienlängsdurchmesser: 250 mm maximum stack height display: 1200 mm maximum stack height investors: 1350 mm Main motor power: 11 kW Machine power: 46 kW Weight: 17,000 kg Air requirement: 0.6 MPa, 0.37 m3/min Dimensions: 6050 x 4200 x 2260 mm

Cat. No. 13-0044 in a very good condition Typ: BN 3101 131 424 Testing water by 22°C back pressure at 1 bar Pressure: 1,1 bar capacity: 10.800 litres/h Motor: 1,8 kW Connection: inlet/outlet: DN 65 according to DIN 32676 can be changed on request for an additional charge Measurements: length: 96 cm width: 33 cm height: 100 cm weight: 84 kg For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.

Cat. No. 13-0048 in a very good condition Testing water by 22°C back pressure at 1 bar Pressure: 3,2 bar capacity: 7.800 litres/h Motor: 7,5 kW Connection: inlet/outlet: DN 65 according to DIN 32676 - can be changed on request for an additional charge Measurements: length: 140 cm width: 44 cm height: 95 cm weight: 300 kg All prices are valid Ex-works, excl.VAT Freight Charges: depending on dimensions and destination Delivery: from 97753 Karlstadt-Karlburg Subject to prior sale

Smicon AFT 2/1500 Fumigation / Fumigation plant During fumigation, a room is flooded with a toxic gas to fight pests/bacteria. As these are toxic gases, special safety measures are required. Fumigation is common in the storage of organic materials (e.g. grain storage, in warehouses of ports, silos, mills), and in churches to combat woodworm. It is a device that is used for disinfecting rooms. Formaldehyde is boiled on the left hotplate and placed together with condensed water (right stove top) in an air flow in a room, killing all bacteria there. Former list price EUR 10,900 net More articles - new and used - can be found in our shop! International shipping costs on request!

Daub Backmeister 18m² Furnace is in TOP condition, General and thorough overhaul. Works like new. New steam apparatus. New electrics New cooking hobs incl. Daub thermal oil boiler system Sale incl. freight and assembly on request I also have to sell other overholt DAUB oven THERMO-OEL Price on request Contact: +48 692 345 660 anbox.pl

79210 Mauzé, France Year of construction: 1996 Type: PV35.Z N691.E6280312 Transmission: SEW USOCOME Type: RF72LP 132S / M Hagenau France n1 = 1400 min-1, n2 = 275 min-1 Engine: Constructions Electrique Nancy Power: 5.5 kW Type: R-132 S-4 No.: 674975 n = 1420 RPM Protection class: Exx

WJ-F102-1150 Mill: swivel 90-45 Spindle speeds (6 steps) 3000/4000/5000/6000/8000/10000 rpm Sliding table:1150mm (Optional 1600mm) M?o?t?o?r?l?i?i?t?u?n?g?: 400V 3 kW (4.0 hp) max. clamping height: 125 mm Table opening: 270 mm max. tool diameter retractable: 260 mm Options at extra cost: Telescope 900mm Eccentric tensioner Milling motor 4 KW (5.5hp), S1 100% Milling motor 5.5 KW (7.5 hp), S1 Milling spindle 40.50 or 60mm Integral safety rails 500mm Right and left-hand running milling cutter Table extension right/left

Smicon FTA 1500U-6L fumigation / gassing system In a fumigation, a room is flooded with a poisonous gas to fight pests / bacteria. Because they are toxic gases, special safety measures are required. Fumigations are common in the storage of organic materials (eg grain storage, in warehouses of harbors, silos, mills), in addition, in churches to control the woodworm. It is a device which is used for the disinfection of rooms. Formaldehyde is boiled on the left-hand cooking plate and placed in a stream of air in a room together with condensed water (right hearth) to kill all the bacteria. Former list price 9,900 EUR Item condition: used More articles - new and used - can be found in our shop! International shipping costs on request!

Used eccentric screw pump Bornemann E2H 1024 Built: 1993 Power: 4 kW Voltage: 400/690 V Flow rate: 10 m3/h Speed: 370 rpm Viscosity: 10000CST Conveyor pressure: 2 bar Suction flange: DN80, top Pressure flange: DN65, axial Manual: yes Machine number: 329495

Mixer/Agglomerator Type: Flexomix 160 in stainless steel

AUTOMATIC CUTTING , BORING and MOULDING machine type PADE 1000 N Machine suitable for assembling part of chairs, tables, frames, small furniture, wheelchair frames, etc. The PADE 1000 N performs the operations of Cutting , milling and drilling at the end of the piece, either singularly or differently combined. All movements of the machine are controlled by pneumatic devices. composed by 3 working units : 1- Cutting unit circular saw diam. mm.350 motor power hp 3 2- Boring unit boring head with 5 / 7 mandrins motor power Hp 3 max. working stroke of boring unit mm. 130 3- Moulding unit vertical spindle for moulder motor power Hp 5,5 spindle diam. mm.30 pneumatic sliding carriage volt. 380/50

Engine power: 1,1 kW, 230V / 1PH motor coolant pump: 50 W Feeding: manual Blade speed: 20-65 m / min Number of steps: infinitely variable Band saw blade dimensions: 1,735 x 12.7 x 0.9 mm length Vice open/closed: 1,120 / 930 mm width without / with material stop: 510 / 720 mm Height lower / upper final position saw bracket: 1240 / 1,590 mm Net weight: 100 kg G & pieces 3300150SE Option: 3 Piece bi-metal band saw blades HSS

Thank you for your interest in our used machines we can offer you as follows: Many thanks for your interest in our second-hand machinery, please find below our offer: Manufacturer / manufacturer: National Lab model / type: 1000-1 Proficool UKT recirculating cooler/chiller chiller temperature controller Details / different: laboratory chillers ProfiCool UKT 1000 1 / almost good as new! Extremely quiet laboratory chillers with maintenance-free, air-cooled chiller. Heat exchanger made of brass. Control Panel with electronic controls with digital display (LED) as well as separate a / output switches for pump and cooling. External casing made of stainless steel. Filler for filling of the cooling circuit. Hose connections (olives) with a 12 mm outer diameter.

Inlet cross-section: 1200 x 2300 mm Drive: 30 kW Rotor flight circle: 450 mm Rotor speed: approx. 80-140 RPM Rotor version: 24 single tooth Screen design: reinforced solid basket, with ribs Hopper: 1,000 mm in height, without lid Machine weight: approx. 6,000 kg Machine number: G-1-66

Mixer/Agglomerator Type: Flexomix 160 in stainless steel

Saw blades: Carbide / HSS, 450 mm Power: saw motor, 4,0 / 5,5 KW Speed: stepless, 10 - 60 min-1 Cutting speed: Blade (450 mm), 7-43, or 15-75 m / min Saw height control: continuously variable, electronically Square 90° maximum working range: 140 x 140 mm 45° max: workspace flat 90° Max: 240 x 80 mm 45° max: work area round 90° Max: 150 mm 45° max: supplies length easy stroke: 5-1000 mm Multiple stroke: 5-9999 mm Supply AC servo max speed: 500 mm / s Gewicht(Säge)CA.:3100 kg Dimensions Lxwxh (saw) about: 2500mm x 1300mm x 2100mm footprint Lxw: 2500 mm x 1300 mm, the machine is efficiently usable by their equipment and construction methods for a wide range of applications. The HMI interface to control the machine ensures a simple and trouble-free operation of the system. Due to the construction of the sawing machine, it is possible to realize a very a ...

Reconditioned 2018 Control: PLC Siemens S7 Blade max: 500 mm Motor output 5.5 KW Saw blade feed: 0-40 mm / s adjustable Saw height control electronic Square 90° maximum working range: 130 x 130 mm Flat 90° maximum work area: 190 x 130 mm Round 90° maximum working range: 170 mm Supply length 2-4000 mm (Saw) approximate weight: 800 kg (Pusher) approx.: 300 kg Dimensions Lxwxh (saw) approx.: 900mm x 1200mm x 1500mm (pusher) approx.: 4800mm x 900mm x 1100mm footprint Lxw 7200 mm x 1200 mm which is machine overhauled in our House and is then in a like-new condition. Among others were renewed following points: -New PLC control -Conversion to Elgo positioning system -New electric components -New pneumatic lines -New pneumatic components -Overhaul of the valve Terminal -Built-in Menzel minimal lubrication system -Replacing common wear parts -Overhaul of cabin -Overhaul ...

Overhaul year 2018 Year of construction 1995-2005 Saw blades Carbide / HSS 450 mm Power saw motor 5.5 KW Speed infinitely variable 10 - 60 min-1 Cutting speed Blade (450 mm) 15-75 m / min Saw height control infinitely adjustable electronic 5 Workspace square 90° Max: 140 x 140 mm Workspace flat 90° Max: 240 x 80 mm Work area around 90° Max: 150 mm Supply length 5-9999 mm Supply AC servo max speed: 500 mm / s (Saw) approximate weight: 2100 kg Dimensions Lxwxh (saw) about: 2500mm x 1300mm x 2100mm Footprint Lxw 2500 mm x 1300 mm The machine is efficiently usable by their equipment and construction methods for a wide range of applications. The HMI interface to control the machine ensures a simple and trouble-free operation of the system. Due to the construction of the sawing machine, it is possible to realize a very accurate length tolerances. The machine will be over ...

Make: Allweiler Type: SZBP 100.1 E 11 P01 No.: 7602467 Q = 5-25 l / min = 300-1500 l / h n = 40-140 min-1 Year of construction: 1995 Condition very good Spare parts: 1 stator speed-controlled drive North Type: SK255F AL-R1500-100 L / 4E Dimensions: LWH = 1400x300x650mm Weight: approx. 120 kg

Mixer/Agglomerator Type: Flexomix 160 in stainless steel

Ex Center screw pump stainless steel Manufacturer: CSF inox Statordurchmesser: 140 mm Statorlänge: 290 mm Transmission: Motovario (Italy) No.: 8816900 Type: TK 100 190-1000 min-1 Engine: Ercole Marelli (Italy) 380 V, 50 Hz, 7.5 kW Dimensions: LWH = 2300 x 460 x 600 mm Weight: approx. 400 kg Condition very good

CALIBRATING MACHINE Mod. SAC SUERI CLS 1150 max. working width mm.1150 1 tape: roller diam. mm.300 Engine power hp 20

We offer various shelving accessories for sale. On this auction we offer 1050 mm depth requirements for pallet racks. Net price: â?¬8 / piece Large number in stock available. Other dimensions available. for example, for shelf depth in mm: 1100 900 800 700 600 Ask questions, We have yet another accessories on offer: Column protection, Metal trays, Grid boxes, Frame protection 1100 / 2400 mm (on request also other bulk!) Impact protection Pallet stops Passing space Diarrhea protection Barrel holder and much more! Delivery according to the zip code throughout Europe possible. If you are interested please contact me.

Ex Center screw pump in stainless steel Manufacturer: CSF inox Transmission: Motovario (speed controlled) Type: TK 100 Engine: Leroy Somer 380 V, 50 Hz, power: 9kW n = 144 min-1 Stator diameter: 160 mm Stator length: 390 mm good condition Dimensions: LWH = 2600 x 450 x 600 mm Weight: approx. 500 kg

QTY. 2 CONTAINERS, OD 655 x ID 250 MM x 560 MM LONG & OD 522 x ID 180 MM x 560 MM LONG, PIRCER DIA. 63 MM,

Machine: Chamber filter press Type: UM 1200 x 1200 Execution: filter press Filter plate format: 1200 x 1200 Year of construction: 1977 refurbished 2017 Number of plates: Filter plates: 43 in PP Filter cloths: optionally available in voting on the medium Presses contents: approx. 1560 dm3 Filter pressure: 15 PSI Material: product-contacting parts flange, traverses stainless steel, PP or rubberized Material: non-product-contacting parts stainless steel Safety device: E.g. photocell etc. optionally on request Buy or rent: Visits of facilities in consultation with us in the work. Other: we deliver the equipment you used ready or refurbished adapted according to your wishes and requirements.

Ex Center screw pump stainless steel Manufacturer: CSF inox Transmission: Motovario Type: TK 100 N1-n2 = 190-1000 min-1 Motor: ASEA Power: 9 kW 380 V Stator diameter: 140 mm Stator length: 600 mm good condition Dimensions: LWH = 2500 x 460 x 660mm Weight: approx. 400 kg

STRIP THICKNESS: 0.5-5 MM, SHHET LENGTH: 2 - 4 M,

) Mortising depth 100 / 150 mm-) nominal no load speed 1/min - 4050) rated power 2500 W-) weight 8.7 kg-) universal motor 230 V / 50 Hz transverse stop best. No. 200954 1 Allen key 4 mm best. No. 093074 1 Allen key 8 mm best. No. 093070 1 connection cable 10 m best. No. 087612 â?¾Zapfenlöcher â?¾Materialeinsatz such as: Solid wood, laminated wood â?¾Ergonomische handle and switch arrangement - for safe, efficient and energy-saving work. â?¾Geringes weight - ideal for use on construction sites. â?¾Extrem powerful motor - for high efficiency and saving time. â?¾Einzigartiges light-weight 8.7 kg. â?¾Der long cross fence holder with large adjustment range allows you to work on large-scale wood. â?¾DAS clamping system in the LS 103 EC allows a quick chain change. Even a tighten ...

used, kpl. 1 year warranty, plate size 1000 x 1000 mm, 80 plates, open or closed outlet, 25 mm cake thickness, pressure max. 15 bar, capacity approx. 1700 liters, filter area 130m2, dimensions 8500 x 1700 x 1800 mm, weight 11 to, motor, drip sheet, filtrate channel, with or without filter cloths

Generators of 100 kVA (hood unit) power: 100 kVA / 80 kW PRP Operating mode: 1500 r.p.m Voltage: 400 V / 230 V Available voltages: 230 230 / 132 V Power factor: cos phi 0.8 Engine: Engine manufacturer: FPT_IVECO Engine model: NEF45TE2F Engine type: Four-stroke diesel Type of injection: direct, common rail Kind of aspiration: turbocharger and subsequent cooling Cylinder, number and layout: 4-L Total displacement: 4.5 l Cooling system: Liquid (water + 50% glycol) Specifications engine oil: ACEA E3 - E5 Fuel consumption 100% PRP: 22.6 l / h Fuel consumption 75% PRP: 18.5 l / h Fuel consumption 50% PRP: 13.4 l / h Oil consumption under full load: 0.1% of fuel consumption Control: Mechanical Inner diameter output exhaust pipe: 70.3 mm Alternator: Builder: Manufacturer: STAMFORD Poles: 4 Connection type (default): Star - series Clutch type: S-3 11 ' 1/2 Insulation ...

used, kpl. 1 year warranty, plate size 800 x 800 mm, 100 plates, open outlet, 25 mm cake thickness, pressure 15 bar, capacity approx. 1320 liters, filter area 106m2, dimensions 9000 x 1300 x 2200 mm, weight 11,000 kg, motor hydraulics, filtrate channel, with or without filter cloths

1030 kVA generator (hood unit) performance: 1030 kVA / 824 kW PRP Operating mode: 1500 r.p.m Voltage: 400 V / 230 V Available voltages: 230 230 / 132 V Power factor: cos phi 0.8 Engine: Engine manufacturer: MITSUBISHI Engine model: S12H PTA Engine type: Four-stroke diesel Type of injection: direct Kind of aspiration: turbocharger and subsequent cooling Cylinder, number and layout: 12 V Total capacity: 37,11 l Cooling system: Water Specifications engine oil: API CD or CF SAE 30 or SAE 40 Fuel consumption 100% PRP: 216,75 l / h Fuel consumption 75% PRP: 166,78 l / h Fuel consumption 50% PRP: 117,52 l / h Oil consumption under full load: 0.8 g / kWh Controls: Electronic Inner diameter output exhaust pipe: 212 mm Alternator: Builder: Manufacturer: STAMFORD Poles: 4 Connection type (default): Star - series Clutch type: S-0 18 " Insulation protection clas ...

used, kpl. 1 year warranty, plate size 1200 x 1200 mm, 100 plates, closed outlet, 20 mm cake thickness, pressure 15 bar, capacity approx. 1850 liters, filter area 224m2, dimensions 9500 x 1600 x 2300 mm, weight 18,000 kg, motor, automatic hydraulics. Plate transport, with or without filter cloths