We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
used
Electric motor, three-phase motor -Power: 0.37 kW -Speed: 1380 rpm -Shaft diameter: 14 mm -Construction: B14G -Protection class: IP 54 -Number: 12x motors available -Price: per piece -Dimensions: 240/160/H185 mm -Weight: 6.2 kg
used
Gear motor, electric motor -Speed: 18 rpm -Power: 0.18 kW -Construction: B3/5 angle -Shaft diameter: Ø 12 mm -Protection class: IP 55 -Dimensions: 290/130/H170 mm -Weight: 5.7 kg
used
Three-phase motor, electric motor -Manufacturer: Elektrim, electric motor type SI63 4B -Power: 0.18kW -Speed: 1390 rpm -Shaft: Ø 11 x 20 mm -Type: B3/B5 -Number: 4x motor available, 1x broken foot -Price per piece -Dimensions: 205/124/H165 mm -Weight: 4.4 kg/pc.
used
adjustable gear motor, variable speed gear motor, electric motor -Manufacturer gearbox Ercole Marcelli type: MVF44/F -Manufacturer Motor Elektrim Type: Sf63-2B -Motor power: 0.25 kW -Speed range: 50-265 rpm -Motor: adjustable -Design: B5 hollow shaft -Drive shaft: Ø 18 mm -Number: 1 piece of motors available -Price: per piece -Dimensions: 440/175/H190 mm -Weight: 11.4 kg
used
Three-phase motor, electric motor -Power: 11 kW -Speed: 1460 rpm -Shaft: Ø 42 x 110 mm -Construction: B3 -Protection class: IP55 -Dimensions: 600/315/H365 mm -Weight: 103 kg
used
Electric motor, three-phase motor -Power: 4.0 kW -Speed: 1435 rpm -Shaft: Ø 28 x 60 mm -Construction: B5 -Protection class: IP55 -Dimensions: 380/250/H270 mm -Weight: 33 kg
used
Electric motor, three-phase motor -Power: 0.63/0.9 kW -Speed: 950/1425 rpm -Shaft: Ø 24 x 50 mm -Construction: B3/B5 -Protection class: IP55 -Dimensions: 325/170/H230 mm -Weight: 15.7 kg
used
Three-phase motor, electric motor -Foot defective, see photo -Power: 2.2 kW -Speed: 945 rpm -Shaft: Ø 28 x 60 mm -Construction: B3 -Dimensions: 420/290/H220 mm -Weight: 42 kg
used
Three-phase motor, electric motor -Power: 0.18 kW -Speed: 2800 rpm -Shaft: Ø 11 mm -Brake: 220 V / 4 Nm -Construction: B3 -Protection class: IP 54 -Dimensions: 235/125/H170 mm -Weight: 4.9 kg
used
Gear motor, electric motor -Speed: 290 rpm -Power: 0.37 kW -Construction: B5 angle -Diameter shaft: Ø 14 mm -Protection class: IP 54 -Price: per piece -Number: 1x available -Dimensions: 330/200/H180 mm -Weight: 8.5 kg
used
Three-phase motor, electric motor -Power: 11 kW -Speed: 3000 rpm -Shaft: Ø 42 mm -Construction: B3 -Protection class: IP 33 -Dimensions: 590/380/H380 mm -Weight: 116 kg
used
Electric motor, three-phase motor -Power: 5 kW -Speed: 1450 rpm -Shaft: Ø 32 mm -Construction: B5 -Protection class: - -Price: per piece -Number: 1x available -Dimensions: 440/360/H305 mm -Weight: 69 kg
used
Three-phase motor, electric motor -Power: 2.2 kW -Speed: 945 rpm -Shaft: Ø 28 mm -Construction: B3 -Protection class: IP 44 -Number: 2x available -Price: per piece -Dimensions: 415/283/H230 mm -Weight: 44 kg
used
Electric motor, three-phase motor -Power: 1.5 kW -Speed: 710 rpm -Shaft: Ø 28 mm -Construction: B3 -Protection class: IP 54 -Dimensions: 380/220/H280 mm -Weight: 38 kg
used
Three-phase motor, electric motor -Power: 7.5 kW -Speed: 1445 rpm -Shaft: Ø 38 mm -Construction: B3 -Protection class: IP 54 -Number: 2x available -Price: per piece -Dimensions: 510/330/H270 mm -Weight: 77.5 kg
used
Three-phase motor, electric motor -Power: 11 kW -Speed: 1450 rpm -Shaft: Ø 42 mm -Construction: B3 -Protection class: IP 33 -Dimensions: 600/360/H370 mm -Weight: 116 kg
used
SKL regenerates turbocharger Manufacturer: VEB compressor construction Bannewitz (DDR) Type: R2 Equipment Nr. 2227-00008 Register-Nr. 256 n max 52000U/min t max 700 ° C m 95 kg Year of construction: 1973
used
colstress holder SK50 with inner suit thread In a suitcase with collets according to photos Special price Lid Hermle Weiler Meuser Kunzmann Wanderer Ruhla Weipert Wohlenberg
used
Praezision clamping tool Kombi plug-on pins BestNo. 1052-018 2 stub SK60x40x27 Unused and ovp 1 x as good condition Only against bid! Special price
used
Condition: Good, working The Baader 51 skin-removal machine is designed to remove skins from the fillets of cod fish, heke, paltsus and red fish. The machine captures the skin from the tip of the tail without any incision. This provides a higher output of finished products. The width of the pipeline: 380 mm. The fillets are placed on a conveyor belt next to each other. Performance: 50-160 fillets per minute (depending on fillet size and operator skills) Power consumption: 1.5 kW Water consumption: 15 litres per minute The width of the work pipeline: 380 mm Dimensions: 1980 x 780 x 1130 mm Weight (net): 530 kg
used
Tool holder, milling holder, milling tool -Adjustment: SK50 -Recording inside: Ø 28 mm -Weight: 2.9 kg/piece
used
Skin area: 345 x 495 mm Part size: Max. approx. 120 mm Carton size: 345 x 495 mm Film width: 390 mm Including roller punch / cylinder punching machine Illig ZSM60 Contact details for ordering SKIN foil and cardboard available. Prior sale reserved - errors possible. Internal Reference Number: D-1149
used
Item tool holders for milling machine with SK40 (inner suit M16) DIN 2080 SK40-ER16 Long milling mandrels for Horzon valley milling in different diameters, partly with bearings Short milling mandrels for holding cutter heads Recordings with Morse cone in different sizes Everything according to photos
used
Tool holder, milling holder, milling tool -Adjustment: SK50 -Tool holder: Ø 40 x 40 mm -Brill chucks: flat chucks, reducing sleeves, cutter head, shell end mill, spindle tool -Number: 1x recordings available -Price: per piece -Dimensions: 220/95/H95 mm -Weight: 4 kg/piece
used
Tool holder, milling holder, milling tool -Adjustment: SK50 -Tool holder: MK2 -Brill chucks: flat chucks, reducing sleeves, cutter head, shell end mill, spindle tool -Number: 1x recordings available -Price: per piece -Dimensions: 190/95/H95 mm -Weight: 3 kg/piece