EISELE va used machines

Overhauled: 2018 Year of construction: 1994-2000 Blade 560 mm Engine power 6.5 / 8,0 KW Speed 1500/3000 min-1 Cutting speed 2100-4200 m / min Saw height control: electronic Square maximum work area: 170 x 170 mm Flat maximum work area: 300 x 150 mm Work area round max.: 200 mm Saw speed 0-40 mm / s adjustable Section length 5-950 mm (~ 9999 mm multiple hub) Nachschubgeschw. maximum 300 mm / s Weight approx. 1900 kg Dimensions Lxwxh 2200mm x2700mm x1950mm The machine is both technically and optically after completed retrofit in mint condition. The machine is efficiently usable by their equipment and construction methods for a wide range of applications. The programmed HMI control system ensures easy and very profitable operation of the plant. The soundproof cabin this reduces the noise emissions to a minimum. The machine will be overhauled on request in our House. Amo ...

Manufacturer: Pressta Eisele Type: 501 angle punch Overhaul year: 2020 Built in 2010 Saw blade carbide: 500 mm Drive power saw motor: 5.5 KW Speed Saw Motor: 2860 min-1 Cutting speed Saw blade: 4500 m/min Saw blade feed: infinitely adjustable 0-70 mm/s Tool area 90 max approx.: 20 x 250 mm Punching cylinder: 1 pcs vertical top diameter 100 mm ,1st st horizontal front diameter 100 mm Punching force power: 4.0 KW Pressure max. 280 bar Pressure in KN at 280 bar approx.: 210 KN Volume flow at 280 bar approx.: 6.8 L/ min Pressure in KN at 200 bar approx.: 150 KN Volume flow at 200 bar approx.: 9.5 L/ min Supply length pneumatic: single stroke max. 600 mm Servo controlled: single stroke max. 600 mm Multiple stroke max. 9999mm Replenishment. servo-controlled replenishment unit max. 500 mm/s Compressed air connection on the side: 6 bar Weight (s ...

The Eisele BSE740 is a self-priming, electric pump unit with a capacity of up to 130 m³ per hour, , designed for pumping dirty water, sludge, bentonite, and slurry. The pump has a motor power of 5.5 kW, , operates on a 3-phase 400V, 50Hz power supply and can operate under a maximum pressure of 20 meters water column (mwk).​, , Below are some important specifications and applications:, , Specifications of the Eisele BSE740, Type: Eisele BS740, Maximum pressure: 20 mwk, Flow rate: Up to 130 m³/h, Motor: 3x 400 V, 50 Hz, 5.5 kW, , Applications: sewage, sludge, bentonite, slurry, Use: suitable for dirty water pumps, industrial use, water management, and salvage projects., , Throughput capacity: 130 m3/h, Max dirt passage: 15 mm, Motor brand: Euromotori, Max. head: 20 MWK, Max dirt passage: 1500 rpm, Weight: 400 kg, , = More information =, , Year of manufacture: 1999, Empty weight: 450 kg ...

The Eisele BSE740 EX Explosion-proof is a self-priming, electric pump unit with a capacity of up to 130 m³ per hour, , designed for pumping dirty water, sludge, bentonite, and slurry. The pump has a motor power of 5.5 kW, , operates on a 3-phase 400V, 50Hz power supply and can operate under a maximum pressure of 20 meters water column (mwk).​, , Below are some important specifications and applications:, , Specifications of the Eisele BSE740, Type: Eisele BS740, Maximum pressure: 20 mwk, Flow rate: Up to 130 m³/h, Motor: 3x 400 V, 50 Hz, 5.5 kW, , Applications: sewage, sludge, bentonite, slurry, Use: suitable for dirty water pumps, industrial use, water management, and salvage projects., , Throughput capacity: 130 m3/h, Max dirt passage: 15 mm, Motor brand: Euromotori, Max. head: 20 MWK, Max dirt passage: 1500 rpm, Weight: 400 kg, , = More information =, , Year of manufacture: 2016, E ...

The Eisele BSE740 is a self-priming, electric pump unit with a capacity of up to 130 m³ per hour, , designed for pumping dirty water, sludge, bentonite, and slurry. The pump has a motor power of 5.5 kW, , operates on a 3-phase 400V, 50Hz power supply and can operate under a maximum pressure of 20 meters water column (mwk).​, , Below are some important specifications and applications:, , Specifications of the Eisele BSE740, Type: Eisele BS740, Maximum pressure: 20 mwk, Flow rate: Up to 130 m³/h, Motor: 3x 400 V, 50 Hz, 5.5 kW, , Applications: sewage, sludge, bentonite, slurry, Use: suitable for dirty water pumps, industrial use, water management, and salvage projects., , Throughput capacity: 130 m3/h, Max dirt passage: 15 mm, Motor brand: Euromotori, Max. head: 20 MWK, Max dirt passage: 1500 rpm, Weight: 400 kg, , = More information =, , Year of manufacture: 1995, Empty weight: 450 kg ...

Ueberholungsjahr 2016 Baujahr 2010 Saegeblatt Hartmetall 500 mm Antriebsleistung Saegemotor 7,5 KW Drehzahl Saegemotor 2000-38000 min-1 Schnittgeschwindigkeit Saegeblatt 3100-6000 mm/min Saegeblattvorschub stufenlos Einstellbar 0-40 mm/ s Arbeitsbereich 90° max.:460 x 50 mm Nachschublaenge Pneumatisch: Einzelhub:max. 300 mm Servogesteuert: Einzelhub:max. 300 mm Mehrfachhub:max. 9999mm Nachschubgeschw. Servogesteuerte Nachschubeinheit 300 mm/s Druckluftanschluss bauseits 6 bar Gewicht(Saege)ca.: 1000 Kg Abmessungen LxBxH(Saege)ca.: 2100mm x2000mm x1600mm Hydraulikagregat) ca.: 900mm x600mm x800mm Technische Beschreibung Pressta Eisele Profilma 540 Retrofit Pressta Eisele Profilma 540 Retrofit Vollautomatischer Hochleistungs-Saegeautomat fuer NE-Metall und Kunstoffe Die Maschine befindet sich nach abgeschlossenem Retrofit sowohl technisch als auch op ...

Metal circular saw cold circular saw Eisele VMSII Metal circular saw Eisele, partially newly laced, incomplete as spare parts carrier or for completion. The machine was partially dismantled for overhaul and partially re-laced. The electric motor and the gearbox work, machine table and vice are in order. Coolant tub, base. The lever for the feed movement, the associated rack, the electric switch, the saw blade, the clamping nut for the saw blade etc. is missing. The saw can be minbecauseed in the miter. Sale as spare parts carrier!

Overhaul year 2020 Built 1995-2019 Saw blade 160 - 200 mm Drive power saw motor 2.2 KW Speed Saw blade 1,500 -3,750 min-1 Cutting speed Saw blade 750 - 3350 m/min Saw height control infinitely adjustable fully electronic Working area square 90° max.: 50 x 50 mm Working range flat 90° max.: 110 x 50 mm Working area Around 90° max.: 50 mm Supply length Pneumatics 2.5 - 350 (single stroke) 5 - 700 (double stroke) Supply length AC Servo 2.5-9999 mm (optional) Supply supply. Servo-controlled replenishment unit 500 mm/s Compressed air connection 6 bar Weight (saw) approx.: 600 Kg Dimensions LxWxH (saw without attachments)approx.: 1400mm x1000mm x1600mm Technical Description Pressta Eisele Profilma 200 Retrofit Pressta Eisele Profilma 200 Retrofit Fully automatic high-performance sawing machine for non-ferrous metals and material The machine is technically as well as ...

Machine Type: Door Belt Drilling Machine Manufacturer: Pressta Eisele Type: Multyfor M Year of Make: 1996 Condition: used and functional / main switch toggle defective / coolant bottle missing. **Offer will only be sent if a complete imprint is provided!** Price 1.250 Euro incl 19% VAT Vb Location Warstein , Germany Reference M-PRE-0724 DESCRIPTION We offer you a used multi-spindle drilling machine from the manufacturer Pressta Eisele. Availability: immediately Our offer is aimed at tradespeople who are registered within the meaning of the Trade Regulation Act according to §14 GewO. The offer is subject to change, subject to prior sale. Please provide your full contact details to receive a quote with our terms and conditions of payment. Errors in the descriptions and offers are reserved!

An aluminium mitre saw Eisele including a mobile extraction unit AS Sägetechnik is available. 1) Mitre saw Pressta Eisele GS 600, year of manufacture: 2023, saw blade diameter: 600mm, detent positions: 22.5°/45°/90°, mitre adjustment: 20°/-90°/-20°, material stop adjustment: 200mm, working height: 970mm, extraction nozzle diameter: 100mm, weight: approx. 650kg. 2) Mobile extraction unit AS Sägetechnik 460VT-2, suction nozzle diameter: 100mm, air flow rate: 1400m³/h, machine dimensions X/Y/Z: approx. 750mm/800mm/1800mm, weight: approx. 100kg. Documentation available. An on-site inspection is possible.

This Eisele BSD304 is a powerful, electrically driven wastewater pump, designed for reliable use in industrial and construction applications., Thanks to its robust construction and high pumping capacity, this model is ideal for pumping contaminated water, sludge, and liquids containing solids., The pump is driven by a 400V electric motor and combines durability with energy efficiency., The cast iron housing and corrosion-resistant components ensure a long service life, even with continuous use in harsh conditions., , Key features:, , Voltage: 400V (three-phase), Pump type: Centrifugal, wastewater, Suction head: up to approximately 7 meters, Delivery head: up to approximately 20 meters, Pump body material: wear-resistant cast iron, , Suitable for: construction sites, sewage work, agriculture, and water management, , Easy to maintain and ready for immediate use, , The Eisele BSD304 is a re ...

Eisele cold circular saw LMS2 Voltage 380 V 16 A Speeds: 1700 - 3400 rpm Good condition

Eisele cold circular saw LMS 2 380 V 16 A 1700 - 3400 rpm 1 clamping jaw without locking

Eisele LMS 1 Speed 4000 rpm 380 V 16 A Untested without plug Swivel table Vice

saw blade diameter: 275 - 315 mm cutting diameter: 80 - 102 mm stroke: - mm total power requirement: 2 kW weight of the machine ca.: 0,4 t dimensions of the machine ca.: 1,5 x 1, 5 x 2 m No. 5230 Cold circular saw with additional gearbox for 4 speeds EISELE VMS II - S - PV ( Typ-Nr. 421 ) Additional gearbox 10/20/40/80 min-1 Cutting speeds 8.5 - 80 m/min Saw blades Ø 275 - 315 mm Space requirement approx. 80 x 90 x 180 cm (plus roller conveyor + fence) Weight approx. 400 kg Working range: Ø 80-102 /flat 160x75/82 Drive: 1,4/1,9 Feed - roller conveyor approx. 2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

This Eisele Waterpump BSD442, Can be used for the emptying and cleaning of pits, ponds, mine shafts and similar tasks,, for reducing ground water, pumping out water ballast from ships, on building sites, in, stone and gravel quarries and building material works., For municipalities and industrial concerns., , Throughput capacity: 100 m3/h, Max dirt passage: 19 mm, Max. head: 6 MWK, Max dirt passage: 1750 rpm, Weight: 1600 kg, , = More information =, , Year of manufacture: 1999, Applicable material: Water, Empty weight: 1.400 kg, Connector size: 4 inch, Technical condition: good, Visual appearance: good, Price: On request, Please contact Gert-Jan Kruitbosch (+31648061001, sales@vantongerentrading.nl) or John van Tongeren (+31620537017) for more information, , = Dealer information =, , Interested? We would be happy to make you an excellent offer! Send an email to sales@vantongerentrading.n ...

Mitre Cold Circular Saw EISELE Type VMS-III-S-PVTyp No. 430 Fabr. No. 2371 Year of construction 1991Saw range at 90 (round) 120 mmSaw range at 90 (flat) 150 x 110 mmSaw range at 45 (round) 100 mmSaw range at 45 (flat) 120 x 100 mmSaw blade diameter 350 mmSaw blade speed 17 + 34 rpm. Mitre cut 45 to the left, 90 and up to 30(60) to the right, infinitely variableMotor power 2 and 2.6 kWNerg connection 380 volts, 50 Hz- two cutting speed levels over 2 motor speeds-

Key data: 500 mm, 45 °

The machine is fully functional, pictures are attached. On request, we will also be happy to send you an up-to-date video showing the machine in operation. Aluminum Double Miter Saw Make: Pressta-Eisele Type: LMS D 450/500 Classic Single II TU/6 Year of Make: 1995 Saw blade size: 450 or 500 mm min./max. cutting length: 240 / 6000 mm Cutting speed: 2820 rpm. Air pressure: 6-8 bar Drive power: 2 x 2.2 kW Weight: 1450 kg External dimensions: approx. 7500 x 1490 x 1790 mm Cuts: 45°-90° (adjustable both blades) Nozzle for suction approx. 70 mm with -Single II control can be positioned electronically -pneum. Clamping devices -pneum. Mist spraying device Good condition, fully functional, ready to plug in for subsequent and immediate use. If you are interested in purchasing the machine, please make us an offer that is subject to change.

dimensions of saw-blade: 350 x Ø 40 x 3 mm cutting range: 120 mm capacity 90 degrees: square: 100 x 100 mm capacity 90 degrees: flat: 170 x 100 mm capacity 45 degrees: round: 120 mm capacity 45 degrees: square: 95 x 95 mm capacity 45 degrees: flat: 120 x 100 mm capacity 60 degrees: round: RE 100 mm capacity 60 degrees: square: RE 85 x 85 mm capacity 60 degrees: flat: RE 85 x 100 mm work height max.: 900 mm saw blade turning speeds: 17 / 34 U/min compressed air: 6.0 - 8.0 bar total power requirement: 1.4 / 1.9 kW weight: 340 kg range L-W-H: 1010 x 765 x 2175 mm Furnishing : - semi-automatic vertical cold circular saw - pneumatic quick clamping device - Infinitely adjustable saw blade feed - Comfortable miter adjustment - Convenient stroke adjustment of the saw unit via clamping levers - Generously sized gearboxes - with Eisele rotation compensation for a long saw blade service life - Con ...

Various metalworking machines and peripheral equipment are available. 1) 2x B-axes. 2) 2x flat gear motors FH77DER. 3) 3x helical gear brake motors R87DRS132S4BE11. 4) Flat gear motor FH77GDRS. 5) Variable displacement axial piston pump. 6) 2x Eisele saws with roller conveyor. 7) Drilling machine. 8) 2x pallet trucks. Some of the machines are defective. An on-site inspection is possible.

Pressta Eisele Panto 300 copy milling machine - Very good condition - With frequency converter and HF motors - With stop system

Specifications: Manufacturer: Pressta-Eisele Type: Norma 400 TU/4 Year of Make: 1996 Saw blade diameter: 400 mm Cutting length: 4,000 mm Saw motor Speed: 2,890 rpm Power: 4.5 kW Dimensions and weight Weight: 625 kg Condition Condition: Used Functional: Tested and fully functional

Pneumatic hardware scissors Pressta Eisele BST for cutting and shortening fittings, hinges and various other metal fittings. Max. hardware size approx.: 17x7 mm Used machine

GENERAL Project No.: 905818 Quantity: 1 pcs. Manufacturer: PRESSTA-EISELE Type: Profilma 502 ST-V Control: Siemens S7 Year of manufacture: 2023 Condition: Used machine GENERAL TECHNICAL DATA Air connection 6-8 bar Mains fuse 16 A NOTE Combined saw and punching machine with vertical punching unit (for aluminium processing, etc.). Max. saw height approx. 95 mm with new 500 mm saw blade. Punching process via a hydraulic cylinder vertically from above, punching stroke max. 20 mm, punching force 300 KN, cycle time per double stroke (forward-back) 2 sec. The machine has only been running for a few hours and is virtually in new condition! We have described the named product with the greatest possible care. However, since this does not come from our production, the data mentioned and the equipment details may differ. We therefore ask you to consider the description as ...

GENERAL Project No.: 905819 Quantity: 1 pcs. Manufacturer: PRESSTA-EISELE Type: Profilma 540 BG Control: Siemens S7 Year of construction: 2024 Condition: Used machine GENERAL TECHNICAL DATA Air connection 6-8 bar Mains fuse 63 A NOTE Combined saw-drilling-tapping machine with vertical drilling unit for e.g. combination tool for drilling and tapping up to 8 profiles at the same time (for aluminium machining, etc.). Cutting area approx. 400x58 mm with new 500 mm saw blade. 2x 4 spindle drill head to accommodate 4 tools each, distance of the spindle 35mm, distance between the sets of 4 spindles, 80mm. The machine has only been running for a few hours and is virtually in new condition! We have described the named product with the greatest possible care. However, since this does not come from our production, the data mentioned and the equipment details may differ.  ...