EHT tss used machines

Working width: 3100mm, usable cutting length: 3050mm, max. sheet thickness: 16mm, stroke rate: 12/min, backgauge range: 10mm-1000mm, throat depth: 300mm, table width: 350mm, max. hydraulic pressure: 280bar, oil volume: 480l. Machine dimensions X/Y/Z: approx. 3700mm/2200mm/2000mm, weight: approx. 6600kg. An on-site inspection is possible.

Key data: 6000 mm, 4 mm

With autom. Stacking and transport table, light barrier, cutting counter, with scrap diverter, compressed air required Machine is repaired, checked, cleaned by a professional and is then fully functional. Test run is carried out. Sheet width: 6000 mm Sheet thickness steel: l 4.0 mm Sheet thickness aluminium: 6.0 mm Sheet thickness front: 2.0 mm Colour: grey Total power requirement: 11 kw/63 A Machine weight: 19,500 kg Dimensions: 6800 x 3500 x 2300 mm without cutting gap adjustment Hydraulic hold-down device Brpmi77K7Oq Column projection: 200 mm Cutting angle adjustment fixed: 1 degree Back gauge: 10 - 1000 mm Machine number: 107640

sheet width: 6000 mm plate thickness: 6 mm distance between columns: 610 mm Control: Elgo 87 P2 total power requirement: 15 kW weight of the machine ca.: 22 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3000 mm plate thickness: 4 mm distance between columns: 3050 mm total power requirement: 8 kW weight of the machine ca.: 4.8 t required space: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

An EHT hydraulic guillotine shear refurbished in 2023 is available. Cutting length: 3000mm, max. sheet thickness steel/VA: 4mm/2mm, backgauge: 10mm-1000mm, adjustment speed: 180mm/s, stroke rate: 18-31 strokes/min, oil volume: 160l. Machine dimensions X/Y/Z: approx. 3700mm/2100mm/2150mm, weight: approx. 4800kg, operating hours: 44024h. The cylinders, blades and hoses were overhauled in 2023. On-site inspection is possible.

sheet width: 3100 mm plate thickness: 4.0 mm thickness at Niro-steel: 2.5 mm cutting angle adjustment: 1.0 ° back stop - adjustable: 10 - 1000 mm adjustment speed: 180 mm/s down holder: 21 Stück strokes per minute: 18 - 31 oil volume: 160 L Control: ELGO P8511 column arm: 200 mm distance between columns: 3050 mm 0: max. 300 bar voltage: 400 V main drive: 9.0 kW weight of the machine ca.: 4800 kg. dimensions of the machine ca.: 3660 x 2070 x 2140 mm ** from a maintenance workshop Equipment: - electro-hydraulic sheet metal shear swing cut - machine frame = all-steel welded construction - ELGO NC control model P8511, control panel at the front left * for positioning the electro-motoric rear stop * target/actual position value input possible * adjustment by three-phase motor via toothed belt - support table with ball rollers * there are recessed grips between the table plates - front finge ...

sheet width: 3050 mm plate thickness: 6 mm weight: 7.000 kg range L-W-H: 3450x2200x1750 mm Equipment/accessories: - adjustable support table - Sheet support - angle stop - Sheet support arms - foot switch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

plate thickness: 16 mm cutting length: 4075 mm weight: 23 t output: 45 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 4050 mm plate thickness: 10 mm column arm: 100 mm table height: 900 mm Number of hold downs: 21 Stück cutting angle: 2 ° total power requirement: 22 kW weight of the machine ca.: 17.100 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Sheet metal shears, tin scissors, sheet metal scissors, hydraulic shears -Sheet shear: hydraulic -Cutting width: 2000 mm -Max. cutting thickness: steel 6 mm -Features: Back gauge, cutting gap adjustment -Space requirement: 3280/2700/H2060 mm -Transport dimensions: 2280/2700/H2060 mm -Weight: 5980 kg

sheet width:3050 mm plate thickness:4 mm total power requirement:9 kW weight of the machine ca.:6 t dimensions of the machine ca.:3900 x H 1850 x T 2100 mm

Force of pressure: 150 t working width: 4500 mm clear stand width: 3050 mm stand projection: 300 mm rear gauge: 1000 mm Electr. Supply: 380 V, 18.5 kW weight: 14.8 t space: 4200 x 2000 x 3000/3150 mm

Technical data: -maximum working length 1250 mm -Stand round 1050 mm -Max pressing force 80 t -Stroke 250 mm -Stand RADIUS 300 mm -Max height betw. Table - press bar 560 mm -Lifting speeds -Backward speed idle max 100 mm / sec. -Forward speed 100 mm / sec. -Backward press speed max. 12 mm / sec. -Total power 15 kW -Space requirement approx. B 1750 x H 3400 X 2000 mm -Weight approx. 8500 kg -with: - CNC - control CYBELEC DNC 7400 PSGY -controlled X - axis back gauge 5-1000 mm -Pneum. Z - axis in three stages. height-adjustable -manually movable and foldable stop fingers -controlled pneumatic die shift - hydr. Tool clamping -Manual crowning - 2 piece support arms -Pointed tool shared H 320 x L 1000 mm -Foot tool H 320 mm x L 1000 mm - universal matrix L 1000 mm

Force of pressure: 250 t working width: 3550 mm clear stand width: 3050 mm stand projection: 300 mm rear gauge: Yes Electr. Supply: 400 V, approx. 26 kW weight: 20 t space: 2100 x 3800 x 3100 mm

pressure: 1500 kN chamfer lenght: 3550 mm distance between columns: 3044 mm Control: Cybelec 34 PS-CN column arm: 350 mm max. ram stroke: 220 mm dimensions of the machine ca.: 3200 x 4200 x 2100 m sheet support: hinten / back number of support arms: 2, verschiebbar / adjust. die shift: hydraulical tool clamping: upper tool quick change system: crown: 3 sets of tools included The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

BRAND: EHT YEAR: 1998 MODEL: VARIOPRESS 250 60 APPLICATION TYPE: BENDING LOCATION: GERMANY MACHINE TYPE: BENDING MACHINES AVAILABILITY: IMMEDIATELY Technical Information GENERAL DATA MEASUREMENTS WIDTH: 8400 MM MEASUREMENTS DEPTH: 3900 MM MEASUREMENTS HEIGHT: TOTAL HEIGHT ABOVE FLOOR: 4070 MM, TOTAL DEPTH UNDER FLOOR: 950 MM MACHINE WEIGHT: 42800 KG CONTROL UNIT BRAND: CYBELEC MODEL: DNC70 MAIN DRIVE PRESSING FORCE: 2500 KN BENDING LENGTH: 6050 MM Additional Information MACHINE BENEFITS TECHNICAL MACHINE BENEFITS: - DISTANCE BETWEEN MACHINE UPRIGHTS: 5550 MM - COLUMN PROJECTION: 350 MM - RAM STROKE: 270 MM - DISTANCE BETWEEN TABLE AND RAM: MIN. 360 MM TO MAX. 630 MM - STROKE SPEED: IDLE MAX. 100 MM/S, PRESS STROKE MAX. 8 MM/S, RETRACT MAX. 100 MM/S - COLUMN WIDTH: 5550 MM QUALITATIVE MACHINE BENEFITS: - HYDRAULIC PRESS BRAKE EHT VARIOPRESS 250 ...

BRAND: EHT YEAR: 1991 MODEL: EHPS 25-30 APPLICATION TYPE: BENDING LOCATION: GERMANY MACHINE TYPE: BENDING MACHINES AVAILABILITY: IMMEDIATELY Technical Information MAIN DRIVE PRESSING FORCE: 2500 KN

Specifications: - Max. working length 4050 mm - Column passage 3050 mm - Max. pressing force 110 t - Plunger stroke 200 mm - Projection 350 mm - Table height 900 mm - Opening width 400 mm - Drive power 17.5 kW - Space requirement approx. W 4250 x H 2850 x D 2200 mm - Weight approx. 15.0 t -with: - Control CYBELEC ModEva 10 S renewed in 2011 - Y 1+ 2 , X , Z - Two-hand control panel: -Mot. Back gauge 5 - 1000 mm - Front support arms - Split sharpening tool, - Universal die

CNC Punching Press Manufacturer: EHT Type: Strippit 1500/30 Year of Make: 2000 CNC Control: Fanuc Working area without replacement: 2500 x 1500 mm Material thickness max.: 8 mm Punching force: 30 tons. Turret with 46 tool positions, including 4 index stations size D 3 programmable claws Metal table Used exclusively in single-shift operation incl. tools WILSON TOOL

pressure: 150 t chamfer lenght: 3550 mm distance between columns: 3050 mm Control: Cybelec DNC 880S stroke: 700 mm throat: 350 mm dimensions: 4400x2200x3940 mm weight of the machine ca.: 15.000 kg Accessories/equipment: - Bending aid in front of the machine - Parking space for bending aid - 3 stop fingers - Control conversion 2011 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 110 t chamfer lenght: 2550 mm Control: Cybelec CybTouch 15 weight: 9000 kg dimensions: 3000 x 2100 x 3000 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

press capacity: 2250 kN quantity of oil: 400 l : DNC 1200PS Eco/Col weight of the machine ca.: ca. 15.500 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

EHT TRUMPF TruBend 8500-60 CNC press brake was built in 2007 in Germany by EHT Werkzeugmaschinen GmbH (now Trumpf Werkzeugmaschinen Teningen GmbH). The machine with a high press force of 500 tonnes is designed for economical machining of hard materials with a maximum length of 6050 mm. The robust, internal stress-free design combined with a powerful hydraulic system ensures the achievement of the best bending results, even during the most intensive challenges. All process parameters are programmed in CYBELEC CNC control, whose intuitive interface allows advanced machining programmes to be created in just a few steps. The TRUMPF TruBend 8500 CNC hydraulic press brake weighs 60 tonnes. Technical specifications of the EHT TRUMPF TruBend 8500-60 press brake - CNC controller: Cybelec ModEva 10S - maximum press force: 500 t (5000 kN) - maximum bending length: 6050 mm - X-axis stop range ...

EHT TRUMPF TruBend 8230-40 CNC press brake was built in 2007 in Germany by EHT Werkzeugmaschinen GmbH (now Trumpf Werkzeugmaschinen Teningen GmbH). The machine, distinguished by its high productivity and excellent precision, is used for the economical machining of workpieces with a maximum length of 4050 mm. The rigid, internally stress-free design combined with a press force of 230 tonnes ensures excellent bending results, even during the most demanding challenges. The operator, in turn, has at his disposal a convenient foot switch and an intuitive CYBELEC CNC control, in which advanced machining programmes are created in just a few steps. The TRUMPF TruBend 8230 CNC hydraulic press brake weighs 18100 kg. Technical specifications of the EHT TRUMPF TruBend 8230-40 press brake - CNC controller: CYBELEC ModEva 10S - number of axes: 5 (X, X1, R, Z1, Z2) - maximum press force: 230 t (2 ...

Pressing force: 200t/2000kN, bending length: 3550mm, upright distance: 3050mm, upright projection: 350mm, max. ram stroke: 200mm, max. ram-to-table distance: 540mm. Dimensions X/Y/Z: approx. 4400mm/2100mm/3200mm, weight: approx. 16000kg, control: Cybelec DNC 800. Including a matrix, 2x upper tool (30°/60°) and a new light barrier. Documentation available. On-site inspection is possible.