used EDELHOFF hzp

Hydr. Double Column Press Fabr. EDELHOFF Type HZP 45Fabr. -No: 8420 built in 1978Max. Punching force: 45 tMax. Ram stroke: 200 mmTable size: 580 x 550 mmInstallation height: 400 mmDistance between the uprights: 600 mmClamping pin hole diameter: 40 H 7Dimensions L x W x H approx. 1200 x 1000 x 2700 mmWeight approx. 3000 kgused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

pressure: 100 t distance between columns: - mm stroke: 350 mm table size: 1150 x 700 mm total power requirement: 11 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 400 mm plate thickness: 3 mm stations: . total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Eccentric press, single column press, punching machine, single column eccentric press, eccentric press, single column press, -Safety cage fully closed -pneumatic viewing window with finger protection -Pressure force: 35 tons -Projection: 190 mm -Strokes: 105 strokes/min -Plunger adjustable: 50 mm -Plunger area 250 x 200 mm -Adjustable stroke: 15-70 mm -Table size: 540 x 310 mm -Projection: 180 mm

pressure: 100 t throat: 345 mm stroke: 20-100 mm no. of strokes: 60 Hub/min ram - range of adjustment: 85 mm table surface area: 980x650 mm ram surface: 600x440 mm hole in the table: Ø 200 mm table height: 820 mm tool hole in ram: ¤7 65 mm weight of the machine ca.: 7 t dimensions of the machine ca.: 2000x2000x2900 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Eccentric press make EDELHOFF type AZR / H638997 built in 1988Max. Press force: 63 tStroke adjustment: 10 - 90 mmRam adjustment: 55 mmRam strokes: 70 hpM.Table size: 800 x 800 mmDrive power: 4.0 kWWith- large table- 2 damping cylinders- Two-hand release- hydraulic clutch- Additional brakeused, in first-class conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Eccentric press make EDELHOFF type DEPSR 63Year of construction 1980Technical specifications:Printing capacity: 63 tSlide adjustment: 100 mmStroke adjustment: 60 mmStrokes: 150 HpM.Drive power: 5.5 kWWeight approx: 5500 kgWith- BVK 422 feed unit Feed max. 200 mm Band width max. 200 mmusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

pressure: 100 t throat: 320 mm stroke: 250 mm clamping surface (upper): 430 x 800 mm base plate surface area: 600 x 855 mm table fall through hole: 200 X 200 mm total power requirement: 11 kW weight of the machine ca.: 8 t dimensions of the machine ca.: 2 x 1,3 x 3,3 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Pressure:063 t throat:250 mm stroke:10 - 100 mm no. of strokes:120 /min distance table/ram, max. stroke up, adjustment up:380 mm table surface area:700 x 500 mm hole in the table:180 x 140 mm table height over floor:700 mm ram surface:360 x 275 mm ram adjustment:60 mm power requirement:5,5 kW weight:3,8 t Dimensions (WxDxH):1,9 x 1,7 x 2,4 m German Safety: permitted for manual loading:UVV 11.062 - VBG 7n5.1 clutch-/ brake combination:hydraulic overload protection in ram:mechanical

one used double action hydraulic drawing press SMG, model HZPU 630]-2700/1500, y.o.m. 1987, 630 ton pressure, 2500x1500mm table and ram, 600 mm stroke, with 3x63 ton cushion, overhauled controls

Pressure total: 1400 ton Stroke: 950 mm Daylight: 2000 mm Table surface area : 3600 x 2500 mm Slide area: 3600 x 2500 mm Die cushion capacity in table: 400 ton Die cushion stroke: 500 mm Die cushion pad area: 3060 x 1860 mm Approach speed: 400 mm / sec Working speed: 40 / 80 mm / sec Return speed: 400 mm / sec Oil volume: 5000 l Required power: 450 kW Weight of machine approx.: 240 ton

Used SMG HZPUX 350/200 - 1500/1300 moulding press in good condition! Main technical data: - Power: 510 ton - Maximum span with castle: 1460 mm - Minimum light with castle: 520 mm - Maximum span without castle: 2160 mm - Minimum light without castle: 1220 mm

Pressure:500 t distance between columns:1550 mm stroke:600 mm distance table/ram, max. stroke up, adjustment up:900 mm table surface area:1200 x 1300 mm pressure of drawing cushion in table:250 t stroke of drawing cushion in table:150 mm die cushion area:950 x 950 mm table height over floor:1245 mm side window:1250 mm ram surface:1200 x 1300 mm speed down:750 mm/s speed up:780 mm/s working speed:105 mm/s oil volume:4000 l power requirement:263,0 kW weight:45,0 t Dimensions (WxDxH):3,3 x 3,3 x 6,1 m height over floor:6,1 m German Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 drawing cushion in table:hydraulic cutting impact cushioning:motoric adjustable

Pressure:200 t distance between columns:1910 mm stroke:600 mm distance table/ram, max. stroke up, adjustment up:800 mm table surface area:1900 x 1150 mm pressure of drawing cushion in table:80 t stroke of drawing cushion in table:300 mm die cushion area:1500 x 950 mm table height over floor:800 mm side window:1000 mm ram surface:1900 x 1100 mm return capacity:36 t speed down:400 mm/s speed up:170 mm/s working speed:30,5 mm/s oil volume:1500 l height over floor:4,85 m height beneath floor:2,6 m power requirement:45,0 kW weight:38,0 t dimensions (WxDxH):3,05 x 2,8 x 5,55 m German Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 drawing cushion in table:hydraulic

ATENA ROTOGRAVURE MACHINE WITH RDC10 ROTARY DIE CUTTERYear: 2007 (December)Machine designed for: PRODUCTION OF CIGARETTES PACKAGING, PAPER LABELS AND CARDBOARD PACKAGINGNumber of impressions: 12.136.991 mNUMBER OF PRINTING UNITS: 7 Serial number of the machine: 13347TECHNICAL SPECIFICATIONS OF THE MACHINESUBSTRATE PAPER/CARDBOARDSUBSTRATE WEIGHT 60-300 gsmMAXIMUM REEL DIAMETER 1800 mmMAXIMUM WEB WIDTH 660 mmMAXIMUM PRINTING WIDTH 640 mmMAXIMUM PRINTING REPEAT 760 mmMINIMUM PRINTING REPEAT 360 mmMAXIMUM ROTARY DIE CUTTING WIDTH 660 mmMAXIMUM ROTARY DIE CUTTING REPEAT 800 mmMINIMUM ROTARY DIE CUTTING REPEAT 535 mmAIR VOLUME 7000 m3/hAIR VELOCITY 40 m/sREGISTER ACCURACYPRINT TO PRINT ...

Chamfering and deburring machine Fabr. WIFEX type 25Table top length: 250 mmTable top width: 90 mmTabletop height: 50 mmSpeed: 22000 rpm.Collet chuck: 6.0 mmWeight: 4.5 kgPower connection: 220 V / 50 HzPower: 320 WusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Igs chips collector make IGS type 22.00Machine -No: 2200983248 built in 1998Technical specifications:Polybag size: 200 lSuction hose size: NW 100 x 3.0 mPower connection: 220 V / 50 HzPower: 2.0 kWExternal dimensions approx.: 970 x 610 x 1860 mmsuitable for foam residues and wastealso for bio eco vp chipslittle used, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Motorized reel make KEMMERICHTechnical specifications:Max. coil weight: 300 kgCoil diameter: 800mmmax. coil width: 220 mmPower connection: 380 V / 50 HzPower: 0.75kWWith- Loop control- Switch cabinetusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Bearing machine Rego VarioProduct descriptionManufacturer: Rego Herlitzius GmbHTtype: VarioCondition: used, cleaned, testedYear of construction: 2007Material: stainless steelDigital controlIncl. Stainless steel boiler 40 L and whiskConnection loads: 3 - 400 V / 50 HzPower: 3.2 kWDedetails see pictures.