4 DOOSAN processing centers used machines

x-travel: 750 mm y-travel: 785 mm z-travel: 600 mm control: FANUC I-Series : : 12000 min/-1 : 22/18,5 kW tool taper: BT 40 : 204 Nm : table surface area: 650 x 600 mm max. table load: 600 kg : -120 / +120 ° tool magazin:: : 40 pos. max. tool weight: 8 kg max. tool diameter: 75 mm max. tool-dia with free toolbox: 125 mm max. workpiece length: 300 mm feeds:: rapid traverse: 45 m/min : 4,5 kN max. workpiece diameter: 840 mm workpiece height max.: 500 mm total power requirement: kVA weight of the machine ca.: 14,5 t dimensions of the machine ca.: 3,7 x 2,5 x 3,1 m - CNC Control FANUC I-Series (F31i) - 5- Axis simultanous - Swivelling Rotary Tabe - Chip Conveyor - Coolant - ATC 40 (BT 40) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 1270 mm y-travel: 670 mm z-travel: 625 mm CNC-control: SIEMENS 828 D table-size: 1300 x 670 mm max. table load: 1000 kg spindle taper ISO: SK 40 spindle turning speed range: 12000 U/min feed stepless: 8000 mm/min rapid traverse: 36 / 36 / 30 m/min drive capacity - spindle motor: 18,5 kW tool change unit: 30 Pos. total power requirement: 40 kVA weight of the machine ca.: 8,5 t dimensions of the machine ca.: 3,20 x 2,45 x 2,40 m chip conveyor: 4,10 x 0,65 x 1,50 coolant: 3,60 x 2,20 x 0,80 m - Siemens 828D CNC control - Direct drive spindle: 12,000 rpm - Two-contact clamping system in the BIG-PLUS spindle (SK40 spindle taper) - Oil cooling of the spindle head - Thermal compensation system (software) - Tool magazine: 30 tools - RENISHAW tool and workpiece probe - Internal cooling via the spindle centre: 12 bar - External cooling with air and cooling lubricant - Internal thread spi ...

travel -x axis: 1.050 mm travel -y axis: 570 mm travel -z axis: 510 mm control: HEIDENHAIN - TNC620 number of spindle speeds: 12.000 U/min tool taper: BT 40 table dimension (L x W): 1300 x 570 mm numbers of positions in the tool changer: 30 Milling machining centers - vertical | DOOSAN - DNM 5700 equipped with 30-way tool changer, ITC cooling system and chip conveyor. The machine only has 13.600 spindle hours. The machine is in a well-maintained condition and has exclusively worked on Aluminum and Plastics. The machine video from the production plant will be shared on request. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: DNM5700 | DNM-5700 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 1100 mm y-travel: 650 mm z-travel: 550 mm Control: Fanuc 31i-MB distance spindle nose and table: 150 - 700 mm Main spindle:: turning speed range - main spindle: 10 - 20000 min/-1 power capacity - main spindel: 22 / 11 kW max. Torque: Nm tool taper: BT 40 work table:: table surface area: 1200 x 650 mm max. table load: 800 kg Tool-Presetter:: number of toolpositions: 30 pos. tool taper: BT 40 feeds:: rapid traverse ( X / Y / Z ): 30 m/min feed speeds: 1500 mm/min total power requirement: 48,55 kVA weight of the machine ca.: 10 t dimensions of the machine ca.: 3,65 x 3,30 m CNC Machining Center Vertical - CNC control Fanuc 31i-MB - ATC 30-fold (BT 40) - Chip Conveyor - Tool Measure - Mold Optio n - The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 1050 mm y-travel: 570 mm z-travel: 510 mm Control: Siemens 828D Main spindle:: turning speed range - main spindle: 12000 min/-1 power capacity - main spindel: 16,5 / 11 kW max. Torque: 141 Nm tool taper: BT 40 distance spindle /table: 150 - 775 mm work table:: table surface area: 1300 x 570 mm max. table load: 1000 kg tool magazin:: number of toolpositions: 40 pos. tool taper: BT 40 max. tool diameter: 80 mm max. tool length: 300 mm max. tool weight: 8,0 kg change-time tool to tool: 1,2 sec change-time chip to chip: 3,2 sec feeds:: rapid traverse ( X / Y / Z ): 36 / 36 / 30 m/min workpiece height max.: 590 mm total power requirement: 40,9 kVA weight of the machine ca.: 6,5 t dimensions of the machine ca.: 2,5 x 3,1 x 2,98 m 3-axis vertical CNC machining center - Siemens 828D CNC control and workshop-oriented programming support Shop Mill - 40-tool tool changer (BT 40) - Bas ...

Manufacturer: DOOSAN Model: DNM 400 A Year: 2011 Condition: Used Stock number: 9438 Control system: FANUC Work table length: 920 mm Work table width: 435 mm Maximum table load (uniform): 600 kg Maximum vertical spindle speed: 12000 1/min X-axis travel: 762 mm Y-axis travel: 435 mm Travel Z-axis: 510 mm Machine height: 2509 mm Machine length: 2093 mm Machine width: 1962 mm Machine weight: 5000 kg

Control: Manufacture: FANUC 21-M x-travel: 1020 mm y-travel: 510 mm z-travel: 575 mm table-size: 1200 x 500 mm spindle turning speed range: 60-8000 U/min tool magazin:: 24 weight of the machine ca.: 7.5 t HEIDENHAIN TNC-426 Prepared for the 4th axis www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

1 CNC lathe (lathe) 2 CNC lathe (lathe) 3 CNC lathe (lathe) 4 CNC milling machine (lathe) 5 2x conventional lathe (lathe) 6 Band saw 7 2x Stand drill All machines work perfectly Pick-up or delivery not until the end of July 2024

DAEWOO PUMA 300 LB (Doosan), 2-axis CNC lathe, CNC Fanuc 18T, Hydraulic tailstock, Condition: very good. This machine can be inspected in our warehouse, under power., Mimu machine tools Italy

Torni CNC, Doosan Puma TW2600, 2016 (low hours), complete with robot, it can be inspected in our warehouse in Gussago BS

turning diameter: 750 mm turning length: 1520 mm control: FANUC 18i TB turning diameter over slide: 540 mm chucking diameter: 8 spindle nose: A2 #6 spindle passage: 76 mm spindle turning speed - stepless: 5000 U/min spindle drive: 22/18,5 kW milling spindle: milling spindle drive: 18,5 /15 kW milling head speed: 12000 U/min x-axis: 565 mm z-axis: 1550 mm y-axis: +/- 85 mm b-axis: 0,001 ° total power requirement: 56,7 kVA weight of the machine ca.: 13,8 t dimensions of the machine ca.: 5,9 x 2,5 x 2,8 m Equipped with: - FANUC Series 18i TB CNC control - Main & counter spindle - IKZ 20 bar - Tool magazine with 40 spaces - 3-jaw chuck The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 650 mm turning length: 2042 mm control: FANUC 0iT greates pass round over bed: 900 mm swing diameter over slide rest: 690 mm max. turning diameter: 650 mm spindle turning speed range: 1500 U/min spindle drive motor: 45 / 37 kW spindle nose: A1-15 bar material dia.: 165,5 mm Number of tools: 12 St. travel -x axis: 362 mm travel -z axis: 2155 mm tail stock: tailstock adjustment: 1000 mm diameter of quill: 120 mm quill stroke: 120 mm max. workpiece weight -without tailstock: 1400 kg workpiece weight max.: 2600 kg Rapid Travel X / Y / Z-Achse: 16 / - / 20 m/min total power requirement: 60,25 kW weight of the machine ca.: 12,5 t dimensions of the machine ca.: 5,98 x 2,5 x 2,88 m - Fanuc F0i CNC control - 21 chuck - 12-station turret - MT 6 tailstock - Chip conveyor - 1 steady rest - 1 tool measuring arm - 14.5 bar coolant system - Oil separator - Chip conveyor - Programmabl ...

Control: Siemens Sinumeric 828 D Turning length: 1,600 mm Turning diameter: 900 mm X axis travel: 470 mm Z axis travel: 1,650 mm Speed: 3 – 1,500 rpm Tool turret: 12 places (all driven) Tool holder: BMT 85P Equipment: Self-centering bezel Conveyor Touchsetter 3-jaw chuck Programmable tailstock Aspirator Coolant pump 20bar with cyclone filter Oil mist extraction

Key data: 700 mm, 5050 mm

CNC Turning Milling Center Manufacturer: Doosan Type 700XLY ll Year of construction 11/20 IBN 2021 Control Fanuc iSeries Plus max. turning length 5050mm max. turning diameter 900mm 12-fold tool turret, all 12 of which are driven Full Y-axis and C-axis Switch-on hours approx. 25,000 on 22.05.25 Spindle hours approx. 5,000 on 22.05.25 Machine is in a very good condition. As accessories there are A large bezel SMW Three-jaw chuck 630mm Face Plate 800mm div. Powered Tools Various steel holders Accessories had cost 80,000 euros Machine is sold due to the poor order situation

turning diameter: 376 mm turning length: 760 mm control: FANUC I-Series Plus greates pass round over bed: 780 mm swing diameter over slide rest: 630 mm max. turning diameter: 376 mm spindle turning speed range: 4000 U/min spindle drive motor: 22 / 15 kW spindle nose: ASA A2-8 spindle bore: 81 mm bar material dia.: 76 mm c-axis: 0,001 ° chucking diameter: 255 mm Number of tools: 12 St. travel -x axis: 260 (72 + 188 ) mm travel -z axis: 830 mm travel -y axis: 105 (+/- 52,5) mm diameter of quill: 100 mm quill stroke: 100 mm tailstock taper MT: MT 5 total power requirement: 41,98 kVA weight of the machine ca.: 6,1 t dimensions of the machine ca.: 4,0 x 2,5 x 2,2 m CNC control FFANUC I-Series Plus - chip conveyor - driventools 5000U/min, 7,5kW - C-axis - hydraulic unit - tailstock - coolant 7 bar - bar loader interface Capto C3 straight chair: 2 Capto C3 90° chair: 1 ER20 Capto chuck: 10 ER ...

control: FANUC Series 31i Model 5 turning diameter: 540 mm turning length: 1040 mm c-axis: indexing: 0.001 ° turning speeds: -5000 U/min tool taper: ASA A2-6 Top turret tool hodler:: 12 y-travel: 170 (+/- 85) mm rapid traverse X-axis: 36 / 24 m/min rapid traverse Z-axis: 36 / 26 m/min Overall size: 8000 x 3000 x 3000 mm weight of the machine ca.: 12000 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

DOOSAN LYNX 220A CNC lathe was built in 2010 in South Korea by Doosan Infracore. The machine, designed for precision machining of workpieces with a maximum diameter of 510 mm, ensures high accuracy and repeatability of the produced parts for many years of intensive use. The machining process is performed by means of a spindle driven by a high-powered motor. The spindle rotates at a maximum speed of 6000 rpm and operates in two axes, X and Z, with feed of 175 mm and 330 mm respectively. It is supported by a three-row angular contact ball bearing at the front and a single-row cylindrical roller bearing at the rear, which reduces the impact of thermal distortion of the front end and improves the machining precision at high speeds. The DOOSAN LYNX 220A features a 12-position turret with a large 210 mm diameter cam clutch and a 39 kN hydraulic clamp. The turret’s rigid design ensures sta ...

DOOSAN LYNX 220A CNC turning center was built in 2010 in South Korea by Doosan Infracore. The machine is designed for machining workpieces with a maximum diameter of 510 mm. It offers high reliability, precision and repeatability of the produced parts for many years of intensive use, which makes it ideal for both unit and series production. Machining is performed by means of a spindle driven by a high-powered motor. The spindle rotates at a maximum speed of 6000 rpm and operates in two axes, X and Z, with feed of 175 mm and 330 mm respectively. To reduce the impact of thermal expansion of the front end and improve overall precision at high speeds, the spindle is supported by a three-row angular contact ball bearing at the front and a single-row cylindrical roller bearing at the rear. The DOOSAN LYNX 220A features a 12-position turret head with a large 210 mm diameter cam clutch and ...

control: FANUC 21i TB turning diameter: 355 mm turning length: 1330 mm c-axis: indexing: 0.001 ° turning speeds: -2800 U/min tool taper: BMT 65 Top turret tool hodler:: 12 rapid traverse X-axis: 16 m/min rapid traverse Z-axis: 24 m/min Overall size: 4000 x 2000 x 2100 mm weight of the machine ca.: 6700 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

General Manufacturer: Doosan Type: Lynx 2100LMSA Year of manufacture: 2018 Control: Fanuc iSeries Travel: X 205 mm Z 560 mm Rapid traverse X/Z: 30/36 m/min Capacity Turning diameter: max. 300 mm Turning length: max 510 mm Main spindle Spindle speed: 6,000 rpm Spindle power: 15 kW Spindle Torque: 127 Nm Revolver Number of tools: 12 Dimensions and weight Dimensions: L 2,805 mm x H 1,693 mm x W 1,595 mm Weight: approx. 3,600 kg Condition Condition: Used Functional: Tested and fully functional Other equipment and accessories included: Iemca Boss 552 32 L Bar Feeder, Year 2018 Sub-spindle AGW Tool holder BMT45 Parts catcher

General Manufacturer: Doosan Type: Puma 2100MS Year of Make: 2011 Control: Fanuc iSeries Travel: X 260 mm Z 590 mm Rapid traverse X/Z: 30 m/min Capacity Turning diameter: max. 406 mm Turning length: max. 520 mm Main spindle Spindle speed: 4,500 rpm Spindle power: 7.5 kW Revolver Number of tools: 12 Dimensions and weight Dimensions: L 3,415 mm x H 1,900 mm x W 1,863 mm Weight: approx. 5,560 kg Condition Condition: Used Functional: Tested and fully functional Other equipment and accessories included: Iemca Master 80 HF 33 L Bar Feeder, Year 2011 Sub-spindle AGW Tool holder BMT45 Parts catcher

Model L126TI No. of Cyl. L6 Aspiration TI Displacement (Liter) 11.1 Bore x Stroke (mm) 123x155 Output (ISO 3046, 8528 kW(ps)/rpm) 265(360) / 2000 - Dimension (L×W×H) 1235x855x1073 Dry Weight (kg) 1,060 Emission TIER-2

Specifications Classification L136 Cylinder L6 Aspiration NA Displacement (Liter) 8.1 Bore x Stroke (mm) 111 x 139 kW(ps)/rpm Heavy Duty* 118(160) @ 2200 kW(ps)/rpm Medium Duty* - kW(ps)/rpm Light Duty* - Dimension (L×W×H) (mm) 1266 x 875 x 937 Dry Weight (kg) 743 Emissions Tier 1 Power Range (kW) 118 Speed Range (rpm) 2200 * The value is based on Output (ISO 3046, 8528).

Classification L136TI Cylinder L6 Aspiration TI Displacement (Liter) 8.1 Bore x Stroke (mm) 111 x 139 kW(ps)/rpm Heavy Duty* 169(230) @ 2200 Dimension (L×W×H) (mm) 1364 x 911 x 937 Dry Weight (kg) 773 Emissions Tier 2 Power Range (kW) 169 Speed Range (rpm) 2200 * The value is based on Output (ISO 3046, 8528).

X-AXIS STROKE MM 2,400 Y-AXIS STROKE MM 960 AXLE STROKE Z MM 800 TABLE SIZE MM 2600X900 ATTACK: BT50 SPEED ROTATION REVOLUTIONS/MIN 12,000 TOOLS N ° 30 FANUC 31I MODEL A CONTROL YEAR: 2012