used DMG MORI cmx

This DMG MORI CMX 1100 Milling machine was manufactured in the year 2018 in Poland and has 12760 production hours, of which 6252 are spindle hours. It is equipped with a DMG MORI SLIMline control unit and has 3 axis. The machine has a spindle speed of 12000 rpm.

This DMG MORI CMX 1100 V Vertical Machining Center was manufactured in the year 2019 in Japan and has 2664 production hours. It is equipped with a DMG Mori SLIMline control unit and has 4 axis. The machine has a spindle speed of 20000 rpm. The machine includes a fourth axis, which is a type of dividing head and not a rotary table.

This DMG MORI CMX 600 V Vertical Machining Centre was manufactured in 2022. It has 4 axes with a NC rotary table (4th axis) from Lehmann with indirect measuring system. The table size is 900 x 560 mm. The machining centre is equipped with a DMG MORI SLIMline® Control based on Siemens and a direct measurement system in X/Y/Z. As extras it comes with chip conveyor (scraper belt, tank capacity: 200l) and a Renishaw touch probe kit for Siemens. See tech specs overview as PDF (DE) attached.

DMG Mori CMX 70 U 5 axis Machining Center Machine has been installed December 2019! Multimaster spindle

DMG Mori CMX 70 U 5 axis machining center Spindle has been replaced with new one recently Probe X : 750 mm Y : 600 mm Z : 520 mm Machine is in excellent condition

This DMG MORI CMX 70U Milling machine was manufactured in the year 2022 in Poland and has 4942 production hours. It is equipped with a SIEMENS 840D Solutionline control unit. The machine disposes of a tool magazine with 30 slots, a chip conveyor with 300l tank and a cabin roof. Contact us anytime for further questions.

GeneralVertical Machining Centres; Control: Control F0iMF CharacteristicsTable surface1400 x 560 mmMovement X / Y / Z1100/560/510 mmSpindle taperBT 40 Tool Magazine with60 PositionsDrive power (25% DC)15 kWDrive power (100% DC)11 kWSpeed max.12000 rpmMaximum load (table centre)1000 KgRapid feed X / Y / Z36/36/30 m/minDimensions (L x W x H)3,19 x 2,76 x 2,94 (3,82 x 3,58 x 3,01) mWeight approx.5500 KgStandard spindle 12,000 min-1, 15/ 11 kWStandard Spindle 12,000 min-1, 15/ 11 kW Spindle speed: 12,000 min-1 Output: 15/13/11 kW (20/17.33/15 HP) (25%ED/30min/cont) Torque: 119/70/57 Nm (87.76/51.62/42.04 ft·lbf) (25%ED/30min/cont)Spindle Taper 7/24 Taper #40/ Grip MAS Spindle Taper 7/24 Taper #40/ Grip MAS This specification uses the spindle No. 40 7/24 taper / Grip MAS tool holder. The grip type and retention knob type of ATC are specified separately.Retention Knob: Special (Center-Throug ...

BRAND: DMG MORI YEAR: 2019 MODEL: CMX 1100 V PRODUCTION HOURS: 2664 APPLICATION TYPE: MILLING LOCATION: POLAND MACHINE TYPE: MACHINING CENTERS (VERTICAL) AVAILABILITY: IMMEDIATELY Technical Information GENERAL DATA MEASUREMENTS WIDTH: 3190 MM MEASUREMENTS DEPTH: 2742 MM MEASUREMENTS HEIGHT: 2937 MM MACHINE WEIGHT: 5500 KG CONTROL UNIT BRAND: DMG MORI MODEL: SLIMLINE MAIN DRIVE SPINDLE SPEED RANGE: 20000 1/MIN TOOL TAPER: BT40 NUMBER OF AXIS: 4 MOVEMENT X-AXIS MOVEMENT: 1100 MM Y-AXIS MOVEMENT: 560 MM Z-AXIS MOVEMENT: 510 MM TABLE OUTER LENGTH: 1400 MM OUTER WIDTH: 560 MM TABLE LOAD: 1000 KG TOOLS SLOTS IN STORAGE: 30 Additional Information MACHINE BENEFITS TECHNICAL MACHINE BENEFITS: - CHIP REMOVAL - CHIP CONVEYOR - ADDITIONAL AXIS 4TH AXIS READY - 4TH AXIS ROTARY TABLE

GeneralVertical Machining Centres; Control: DMG MORI SLIMline® Multi-Touch control CharacteristicsTable surface900 x 560 mmDimensions (L x W x H)3,03 x 3,49 x 2,94 (5,8 x 5,5 x2,94) mRapid feed X / Y / Z30/30/30 m/minMovement X / Y / Z600/560/510 mmSpindle taperSK 40 DIN 69871 Tool Magazine with30 PositionsMax. torque82 NmTorque (100% DC)54 NmDrive power (40% DC)13 kWDrive power (100% DC)9 kWSpeed max.12000 rpmMaximum load (table centre)600 KgWeight approx.5200 KgDirect measuring system X,Y,ZDirect Measuring System X, Y, Z inclusive Air Purge for Measuring SystemDMG MORI IoTconnectorIoTconnector connects DMG MORI machines as well as third-party machines with CELOS. Standardized interfaces enable data exchange between the IoTconnector and CELOS APPs such as the NETservice. The integrated firewall with automatic updates ensures the hSafety Package for Power FailureSafety Package for Power ...

4th axis With Lehmann Rotary table Max. X-axis stroke 600 mm Max. Y-axis stroke 560 mm Max. Z-axis stroke 510 mm Max. workpiece height 630 mm Max. workpiece weight 600 kg Max. workpiece length 900 mm Max. workpiece width 560 mm Siemens 840D SL Slimline Multi-Touch Operate 4.7 control unit With Renishaw tool and workpiece measuring units

This DMG CMX 1100 V Machining center (vertical) machine was manufactured in 2018 in Italy. This machine has a table size of 1400 x 560 mm. The spindle operates at speeds up to 12000 rpm with a power output of 13 kW. It features a tool capacity of 30 tools and includes a Renishaw probe, optical scales, and tool presetting functionality. Contact us anytime for further information.

Key data: 850 Heidenhain, 600 iTNC 530, 640

Table length: 850 mm Table width: 600 mm Longitudinal X: 640 mm Cross Y: 600 mm Vertical Z: 500 mm Positions ATC: 30   Positions APC: 0   CNC Brand: Heidenhain CNC Model: iTNC 530 X – Travel:              640mm Y – Travel:              600mm Z – Travel:              500mm Table Length:            850mm Table Width:             600mm Table load:              600Kg Feed rate X-Axis:        40.000mm/min. Feed rate Y-Axis:        40.000mm/min. Feed rate Z-Axis:        40.000mm/min. Spindle Taper:           Sk40 ISO/Bt/Mk Power on spindle:        19kW Speeds / ra ...

Table length: 790 mm Table width: 560 mm Longitudinal X: 635 mm Cross Y: 510 mm Vertical Z: 460 mm Positions ATC: 30   Positions APC: 0   CNC Brand: Siemens CNC Model: 840 D X – Travel:              635mm Y – Travel:              510mm Z – Travel:              460mm Table Length:            790mm Table Width:             560mm Table load:              600Kg Feed rate X-Axis:        30.000mm/min. Feed rate Y-Axis:        30.000mm/min. Feed rate Z-Axis:        30.000mm/min. Spindle Taper:           SK40 ISO/Bt/Mk Speeds / ranges:         8000Rpm ATC / revo ...

Table length: 630 mm Table width: 500 mm Longitudinal X: 500 mm Cross Y: 450 mm Vertical Z: 400 mm Positions ATC: 30   Positions APC: 0   CNC Brand: Heidenhain CNC Model: iTNC 530 X – Travel:              500mm Y – Travel:              450mm Z – Travel:              400mm A – Axis:                - 5 to + 115 ° Table Length:            630mm Table Width:             500mm Table load:              400Kg Feed rate X-Axis:        30.000mm/min. Feed rate Y-Axis:        30.000mm/min. Feed rate Z-Axis:        30.000mm/min. Spindle Taper:          & ...

Turning diameter: 680 mm Turning length: 635 mm Turret positions: 12 CNC Brand: Siemens CNC Model: 840 D Max. turning Ø:  680mm X-Axis:          260mm Y-Axis:          40mm Z-Axis:          635mm Spindle bore:    68mm Speedrange:      5000Rpm Spindle power:   35kW Subspindle speeds:7000Rpm ATC / revolver:  12 Chip conveyor:   Yes  Length:          4.900 mm  Width:           2.500 mm  Height:          2.100 mm  Weight:          6.500 kg 

2-axis universal turning machine with SUPFINA superfinishing attachement Working area swing diameter over guide way protection: 500 mm -- 19,68 in clamping chuck diameter: 170 (210) mm -- 6,69 (8,26) in transverse stroke (X axis): 190 mm -- 7,48 in longitudinal stroke (Z axis): 525 mm -- 20,66 in Feed drive rapid feed, X/Z axes: 30/30 m/min -- 1181,1/1181,1 in/min Y axis* 22.5 m/min -- 885.8 in/min Main stock spindle nose size: 140 h5 mm spindle diameter in front bearing: 100 mm 3,93 in spindle bore diameter: 73 mm 2,87 in Main drive AC main drive power (100%-40% ED) 13 - 14 kW 17,42 ? 18,76 HP Torque (100%-40% ED) 171,5 - 192 Nm 126,49 - 141,61 ft.Lb Speed range 20 ? 6000 rpm Electrical connection (5 conductor system, L1, L2, L3, N, PE) connected load, total approx. 30 kVA voltage: 400 V frequency: 50 Hz protection (slow-blow) acc. to VDE 0100: 63 A per ...

2-axis universal turning machine with SUPFINA superfinishing attachement Working area swing diameter over guide way protection: 500 mm -- 19,68 in clamping chuck diameter: 170 (210) mm -- 6,69 (8,26) in transverse stroke (X axis): 190 mm -- 7,48 in longitudinal stroke (Z axis): 525 mm -- 20,66 in Feed drive rapid feed, X/Z axes: 30/30 m/min -- 1181,1/1181,1 in/min Y axis* 22.5 m/min -- 885.8 in/min Main stock spindle nose size: 140 h5 mm spindle diameter in front bearing: 100 mm 3,93 in spindle bore diameter: 73 mm 2,87 in Main drive AC main drive power (100%-40% ED) 13 - 14 kW 17,42 ? 18,76 HP Torque (100%-40% ED) 171,5 - 192 Nm 126,49 - 141,61 ft.Lb Speed range 20 ? 6000 rpm Electrical connection (5 conductor system, L1, L2, L3, N, PE) connected load, total approx. 30 kVA voltage: 400 V frequency: 50 Hz protection (slow-blow) acc. to VDE 0100: 63 A per ...

Working area Circulation diameter over bed web cover: 700 mm Max turning diameter: 410 mm Max turning length: 800 mm Rod passage: 65 (76) mm Chuck diameter: 250 (315) mm Flat stroke: 300 mm Longitudinal stroke: 850 mm Feeds Rapid response X/Z axles: 60/30 m/min Y axis* ** 22.5 m/min Max. spindle motor speed: 6,000 rpm Main Spindle Spindle head (flat flange): 170 h5 mm Spindle diameter in the front bearing: 130 mm Spindle bore: 87 mm Main drive Power of the three-phase main drive 25 kW Torque (100% ED) 280 Nm Speed range 25 - 5000 1/min Drive power rating (100% DC): 35 kW(AC) Counter spindle: ISM 52 ISM 76 synchronous Spindle head (flat flange) : 140 h5 mm 170 h5 mm Spindle diameter in the front bearing: 100 mm 130 mm Spindle bore: 73 mm 87 mm Counter sp ...

GeneralHorizontal universal machining center; Control: CELOS with Siemens 840D sl Operate Working area 1Longitudinal650 mmCross700 mmVertical950 mmTechnical DataFeed rate longitudinal/transverse/vertical60000/60000/60000 mm/minRapid traverse longitudinal/transverse/vertical60/60/60 m/minCabineFull protection cabinMotor spindle 20,000 rpmMotor spindle speedMASTER® HSK-A 63 Spindle speed 20 - 20,000 min-1 Output 35 kW / 25 kW (47 hp / 33 hp) Torque 130 Nm / 86 Nm (96 ft lbs / 63 ft lbs) (40 / 100 % duty cycle)Taper cleaning brushesTaper cleaning unit with rotating brushes for spindle taper HSKNC swivel rotary table DirectDriveNC swivel rotary table direct drive Table plate: d 650 mm / 25.6 in 1 x T-slot 14 H7 / 0.55 H7 (alignment groove, table centre) 8 x T-slot 14 H12 / 0.55 H7 (clamping grooves) Permissible load: 600 kg / 1,323 lbs Rotary-axis: 80 min-1 direct drive Swivel-aKinematics a ...

GeneralUniversal machining centre; Control: 3D Control Siemens 840D powerline Technical DataFeed rate longitudinal/transverse/vertical60000/60000/60000 mm/minRapid traverse longitudinal/transverse/vertical60/60/60 m/minWorking area 1Longitudinal1250 mmCross1000 mmVertical1000 mmMiscellaneousClamping SystemHSK-A 100 Tool changerApplicationUniversal Type of magazineChain Tool changer planehorizontal Type of gripperDouble gripper Automatic swivel milling headUniversal head: automatic changeover from vertical to horizontal machiningProd. package 40 bar/23 l/minCoolant through spindle centre form AD 40 bar/23 l/min / 580 psi/6 gallon/min (theoretical pump performance) clear-view rotating window Multi-jet unit at universal head, switchable from coolant to air (max. 6 bar / 90 psi) (6 water jets, 4 air jets) pumpNC rotary table with pallet changerType of Measuring system Direct measuring system ...

General- Compound slides with turning/milling spindle as integrated spindle motor, with hydr. locking at turning acceptance HSK-63A DIN 69893 - Y-axis ± 100 mm - B-axis ±110° with pneumatic locking - Tools magazin disc with 1x24 positions - Absolute direct gauging system in the X, Y, Z linear axes - Coolant pump 5 bar; 20l/min - Cooling system for spindle motor, turning/milling spindle, B-axis torque motor - USB interface, Ethernet interface; Control: CELOS with Siemens 840D sl Operate Working areaSwing diameter over guide ways500 mmTurning diameter500 mmMax. Turning Length750 mmBar diameter max.65 mmWork spindle (left)Spindle noseFlat flange Diametre of spindle nose170h5 mmSpindle bore87 mmSpindle diametre on front bearing130 mmMain drive 1Drive power (100% DC)25 kWDrive power (40% DC)32 kWSpeed range- 5000 rpmTorque (100% DC)280 NmMax. torque (40% DC)360 NmC-Axis Speed-5000 rp ...

BRAND: DMG MORI YEAR: 2008 MODEL: CTX510 ECO V3 PRODUCTION HOURS: 28127 APPLICATION TYPE: TURNING LOCATION: POLAND MACHINE TYPE: LATHE AVAILABILITY: IMMEDIATELY Technical Information CONTROL UNIT BRAND: SIEMENS MODEL: 810D SHOPTURN MAIN DRIVE SPINDLE SPEED RANGE: 3250 1/MIN MOVEMENT X-AXIS MOVEMENT: 300 MM Z-AXIS MOVEMENT: 1050 MM MEDIA MAIN ELECTRONIC CONNECTION: 400V / 50 HZ POWER CONSUMPTION: 40 KVA Additional Information MACHINE BENEFITS TECHNICAL MACHINE BENEFITS: - TIP DISTANCE -ROTARY TIP: 1150 MM - MAX TURNING LENGTH: 1000 MM - MAX WEIGHT BETWEEN TIPS: 350 KG - SWING OVER THE BED: 465 MM - SPINDLE BORE: 102. 5 MM - HYDRAULIC CHUCK DIM. 250MM - TURRET HEAD 12 TOOL SLOTS VDI40, 6 DRIVEN SLOTS - RPM-DRIVEN TOOLS: 4000 RPM QUALITATIVE MACHINE BENEFITS: - MACHINE CONNECTED, VERY GOOD CONDITION, READY FOR TESTS. - PART CATCHER - TOOL LE ...

BRAND: DMG MORI YEAR: 2008 MODEL: CTX510 ECO V3 PRODUCTION HOURS: 28127 APPLICATION TYPE: TURNING LOCATION: POLAND MACHINE TYPE: LATHE AVAILABILITY: IMMEDIATELY Technical Information CONTROL UNIT BRAND: SIEMENS MODEL: 810D SHOPTURN MAIN DRIVE SPINDLE SPEED RANGE: 3250 1/MIN MOVEMENT X-AXIS MOVEMENT: 300 MM Z-AXIS MOVEMENT: 1050 MM MEDIA MAIN ELECTRONIC CONNECTION: 400V / 50 HZ POWER CONSUMPTION: 40 KVA Additional Information MACHINE BENEFITS TECHNICAL MACHINE BENEFITS: - TIP DISTANCE -ROTARY TIP: 1150 MM - MAX TURNING LENGTH: 1000 MM - MAX WEIGHT BETWEEN TIPS: 350 KG - SWING OVER THE BED: 465 MM - SPINDLE BORE: 102. 5 MM - HYDRAULIC CHUCK DIM. 250MM - TURRET HEAD 12 TOOL SLOTS VDI40, 6 DRIVEN SLOTS - RPM-DRIVEN TOOLS: 4000 RPM QUALITATIVE MACHINE BENEFITS: - MACHINE CONNECTED, VERY GOOD CONDITION, READY FOR TESTS. - PART CATCHER - TOOL LE ...

BRAND: DMG MORI SEIKI YEAR: 2010 MODEL: DURATURN 310 ECO PRODUCTION HOURS: 20694 APPLICATION TYPE: TURNING LOCATION: POLAND MACHINE TYPE: LATHE AVAILABILITY: IMMEDIATELY Technical Information GENERAL DATA MACHINE WEIGHT: 3500 KG CONTROL UNIT BRAND: MORI SEIKI MODEL: MSX 853 MAPPS IV MAIN DRIVE NUMBER OF AXIS: 3 Additional Information MACHINE BENEFITS TECHNICAL MACHINE BENEFITS: - C AXIS LIVE TOOLS - TURNING DIAMETER 228 MM - TURNING LENGHT 393 MM - TURRET SAUTER VDI30 - TAILSTOCK - TOOL PROBE - CHUCK KITAGAWA 210MM - SPINDLE BAR CAPACITY 51MM - EQUIPMENT; CHIP CONVEYOR WITH COOLANT TANK AND POMP - 3 LIVE TOOL HOLDER WTO, 4 NORMAL HOLDER VDI30 QUALITATIVE MACHINE BENEFITS: - BOOKS MACHINE

X : 1035 mm Y : 560 mm Z : 510 mm Control : Siemens 840 d Number of working hours : 4000 Chip conveyor