used DATALOGIC ds

Position scanners, lasers, barcode scanners -10-30 V DC -DS2100 -PG220 -Weight: 2 kg

Hersteller : Datalogic Scanner Scanner inkl., Free text 1: Komplett verkabelt mit Netzteil und Verteilerdose, Free text 2: ca.25 Meter kabel dran,

Here Privacy policy Information on the collection of personal data In this privacy policy, we would like to explain how we handle the personal data that is transmitted to us when using our services. Personal data is all data that can be related to you personally, e.g. name, address, e-mail addresses or user behaviour. Unless otherwise stated below, the provision of your personal data is not required by law or contract, nor is it necessary for the conclusion of a contract. You are not obliged to provide the data. Failure to provide it will have no consequences. This only applies unless otherwise specified in the subsequent processing operations. Controller pursuant to Article 4 No. 7 GDPR and Data Protection Officer: The person responsible for the processing of your data is: VOSS GmbH & Co. KG Ohrstedt-Bhf. North 5 25885 Wester-Ohrstedt Germany Phone: 04847 8068-0  ...

Position scanners, lasers, barcode scanners -Type: LS50HR3 -Voltage: 4.75-28 VDC -Price: per piece -Number: 2x available -Weight: 0.7 kg

Reflective light barrier, light barrier -11-30 V DC -Price: per piece -Number: 5x available -Weight: 0.3 kg

Side channel blower, side channel blower, ring blower, vacuum pump, blower -Manufacturer: Becker, spare parts for vacuum pumps / side channel blowers -Carbon fins/carbon sliders: Art. 901349 00007 (WN124-162) 1 set/7 pcs. -Seal: Art. 00890016500 T3.40-61 1 pc. -Gasket: Art 00570016500 T3.40-104 1 pc. -Filter cartridge: Art. 90952100000 C 76/2 2 pcs. -Price/delivery: complete -Total weight: about 0.6 kg

Valmet-Sisu engine type= 612/634 DS/DSE-135KW fully repaired engine with starter, alternator in exchange. info@miw-zeven.de

Pistons from MAHLE ETNR. 1350082 Suitable for Scania DS11 or other

Rotary screw air compressor Kaeser 160 kW, 12 bar, 23.5 m3/min.

Rotary screw air compressor frequency controlled Kaeser DSDX 302 SFC 160 kW, 12 bar, 5.60-26.70 m3/min.

Technische Daten: - Arbeitslänge 3500 mm - linker Kopf fest - hydropneumatischer Sägevorschub - Drehung der Köpfe rechts und links - Schwenkung der Köpfe 90C bis 45C - dadurch auch für Schifterschnitte geeignet - Positionierung nach Skala mit Spannvorrichtung - Blaspistole - 2 HM-Sägeblätter 400 x 30 mm - Motor: 1,5 kW - Spannung: 230/400V, 3~, 50Hz - FI Sägeblatt: 400 x 30 mm - Drehzahl Sägeblatt: 3800 U/min - min. Schnittlänge: 565mm - max. Schnittlänge: 3300mm - Luftanschluss: 6-8 bar - Abmessungen LBH: 4150x1200x1650 mm - Gewicht: 450 kg

Centrifugal compressor in landfill gas use. Technical data sheet located as an attachment. The compressor is located in a very good condition, is until end of July 2018 in the operation and is very robust (casing). Pressure difference 180mbar and 15 kW drive motor. Radial blower used for landfill gas utilization. Technical specification see attached data sheet. The blower is in good technical condition and still in operation on a bio-gas plant in Germany untill end of July 2018. Pressure drop 180 mbar with 15kW electrical drive.

132 kW, 11.5 bar, with Sigma control.

Hose pump for conveying corrosive, abrasive, highly viscous or highly dense liquids. Due to its simple design, the pump is self-priming, low-wear and dry-running. Manufacturer: Delasco Type: DSC65PA1S Y.O.M.: 10/2001 Q= 3.1 a / 14.95 m3/h P= 15 bar with geared motor SEW-Usocome 220/380 V; 11 kW; 1440/ 7.2/44.0 rpm Inlet opening approx. 55/100 mm Total approx. 1400 x 1300 H 1150 mm

DSB Singlehead NG XM / DSB 350 series Rated power of the main drive 32 kW Connection voltage* 3 AC 400V / 50 Hz 3 AC 480V / 60 Hz 3 AC 575V / 60 Hz* 3 AC 210V 50 / 60 Hz* Max. cutting width 350 mm Band saw blade tension servo-pneumatic Band gear adjustment (band gear visible in the sight glass) Automatic adjustment of the belt run Feed speed, continuously adjustable (depending on Depending on the type of wood and dimension of the block) Standard feed rate: from 4 to 20 m/min Precision feed rate: from 1 to 15 m/min High-speed feed: from 8 to 45 m/min Band saw speed, infinitely adjustable Up to 60 m/s Diameter of band saw guide discs of band saw 915 mm Adjustment of band saw cutting height From 1.7 to 165 mm Band saw blade guide with increased durability Durability Carbon guide Compressed air connection Working pressure 7 bar Water connection 1/2 Cdooj7rci Required ...

We are looking permanently for used stationary electric compressors of brands Atlas Copco and Kaeser.

75 kW, max. 7.5 bar, 13.8 m3/min.

Valmet/Sisu Engine Type=612 DSE-135KW, Factory Repaired Engine with starter+alternator.New TOP-MOTOR !!! info@miw-zeven.de

SISU/Valmet engine type=612DSE,135KW,6-cylinder series with turbocharger. Motor is complete with starter+alternator,factory repaired. 1 year warranty !! info@miw-zeven.de

132 kW, max. 11 bar, 20,3 m3/min. Air end new in 2001 and has 38000 working hours.

110 kW, max. 12.0 bar, 16.10 m3/min. volume flow 16.1 m3/min at 10 bar.

Discus level sanding machine with Vertikaler-Schleifspindel and Schleifradaufnahme f?r Ceramische-Schleifsegmente. Construction year 1957 the machine is technical and geometrically in very good state. it was waited up to Au?erbetriebsetzung 2006 regelm??ig. hydraulic table impulse: infinitely variable adjustably vertical delivery: hydraulically Schleifrad-Durchme?er: 600 mms impulse achievement: 22 kW Magnetabme?ung: 300 x 1,000 mms Schleiftischabme?ung: 400 x 1,700 mms

110 kW, max. 12,0 bar, 16,10 m3/min. Volume flow 16,1 m3/min at 10 bar.

132 kW, max. 11 bar, 20.3 m3/min. screw element new in 2001 and has 38000 operating hours.