DAIKIN ewa used machines

DAIKIN EWAD 100E-SL008 Brand:DAIKIN Type:EWAD 100E-SL008 Stock Number:M22-4590 Cooling capacity: 97.9 kW Number of fans:2 Refrigerant:R134a Refrigerant content: 18 kg Rated voltage: 400 Volt Power consumption:38.8 kW Motor power: 2x 0.78 kW Dimensions: 2165 x 1292 x 2273 mm Weight:1.751 kg Year of construction:2012 Quantity in stock:1 piece(s) Price on request Description: Nice air-cooled Daikin chiller with 1 screw compressor. This chiller is equipped with a switch box and a controller. Mentioned capacity at a water temperature of +12/7°C and an ambient temperature of +35°C. Also visit our website: used-refrigeration

Daikin EWAQ040BAWHBH Water chiller Serial: 3400102 2014, Air cooled mini inverter scroll water chiller, 41.Kw, with Daikin EKBT 200L buffer tank with cabinet, 3Ph

Aircooled chiller DAIKIN EWAD460BZSS001 459 KW Cooling capacity: 459 kW / 130.51 tons (12/7 — 35°C) Year of manufacture: 2012 Options: Hydraulic module Refrigerant circuit: 2 pcs. Heat exchanger: Shell and tube Condenser: Copper / Aluminum Compressors: 2 pcs. McQuay HSW3121QS11YA (screw, inverter) Type of refrigerant: R134А Number of fans: 12 pcs. (Frequency inverter) Hydraulic module: 1 pcs. water pump LOWARA FCTE80-125/55/P Dimensions: 6.15x2.23x2.36 m. Weight: 5310 kg. Working hours: 46042/51397 h. Condition: Good

Used Daikin EWAH350TZXRB2002 air-cooled chiller on Freon. Complete with 2 Daikin HSV3122US13 semi-hermetic screw compressors, condenser with 12 fans, Provides EV32271010H3 shell and tube as evaporator with a volume of 28 l (Water) / 28 l (R1234ze), Lowara LNEE 65-125/55/P25VCSX water pump and a control cabinet with a MicroTech*III controller. Brand: Daikin Type: EWAH350TZXRB2002 Product type: Air cooled chiller Capacity kW: 355 Capacity Tons: 100,9 Refrigerant: R1234ze Weight: 5423 kg Sizes: 5900x2270x2550 mm (LxWxH) Compressors: 2 Daikin HSV3122US13 Number of fans: 12 Year of built: 2019

Aircooled chiller DAIKIN EWAD470D SS027 467 KW Cooling capacity: 467 kW / 132.79tons (12/7 — 35°C) Year of manufacture: 2016 Refrigerant circuit: 2 pcs. Heat exchanger: Shell and tube Condenser: Copper / Aluminum Compressors: 1 pcs. Daikin HSA1920S11YA (screw) + 1 pcs. Daikin HSA2040S11YA (screw) Type of refrigerant: R134а Number of fans: 8 pcs. (2 pcs. Frequency inverter) Dimensions: 4.04x2.24x2.23 m. Weight: 4090 kg. Working hours: 8485/3155 h. Condition: Good

DAIKIN Cold water unit Air-cooled, 180KW,Y.O.M., cold mite 134a. Compressor one pcscrew, make Daikin. Price € 8,000,-

Daikin ERQ200A7W1B Condensing unit Serial: 8008515 2020, condensing unit, Gas R410A, 3Ph

WATERCOOLED CHILLER/HEAT PUMP DAIKIN EWHQ120G 95/130 kW Cooling capacity: 95 kW - 27 ton (12/7°C — 35°C) Heating capacity: 130 kW - 36.9 ton (40/45°C - 7°C) Year of manufacture: 2019 Refrigerant circuit: 1 pcs. Heat exchanger: Plate Options: Heat pump Type of refrigerant: R410A Compressors: 2 pcs. Copeland(scroll) Dimensions: 2,432 х 0,928 х 1,066 m. Weight: 729 kg. Working hours: 11437 / 4712 h. Condition: Excellent

Power 1.1 kW, 220 V 50/60 Hz, Weight 55 kg R410A refrigerant. 970 g 3 pieces in stock The air coolers were attached to newly acquired EDM machines. Due to the presence of a central water cooling system, the air coolers were dismantled before commissioning.

Aircooled chiller/Heat pump DAIKIN EWYQ050CAWP H 50.5 kW / 50.3 kW Cooling capacity: 50.5 kW / 14.36 tons (12/7 — 35°C) Heating capacity: 50.3 kW / 14.3 tons (40/45 —7°C) Year of manufacture: 2018 Options: Heat pump. Hydraulic module. Refrigerant circuit: 2 pcs. Heat exchanger: 2 pcs. Plate Condenser: Copper / Aluminum Compressors: 2 pcs. Daikin JT1GCVDKYRBA (scroll, inverter) + 2 pcs. Daikin JT170G-KYEBA (scroll) Type of refrigerant: R410a Number of fans: 2 pcs. (Frequency inverter) Hydraulic module: 1 pcs. water pump GRUNDFOS CM10-2-X-R-A-E-AQQEF-A-A-N, expansion vessel. Dimensions: 2.36x0.78x0.68 m Weight: 604 kg Working hours: 32957/32957/32957/32957 h. Condition: Good

A small Daikin chiller with inverter is available. Refrigerant: R410A, refrigerant charge: 2.95kg, max. operating pressure high/low side: 4MPa/3MPa, max. water pressure: 3bar, weight: approx. 180kg. Documentation available. An on-site inspection is possible.

Baking Plates for EWA Baking Machine for Molded Cones - Condition: used - Wafer Length: approx. 130 mm - Wafer Diameter: approx. 30 mm

Manufacturer: EWAG Model: EWAMATIC sharpener with electric spindle Type of Machine : Grinding Machine Voltage: 400 Volt Frequency: 50 Hz Certification: CE Find more here - / Contact us at -

GENERAL INFORMATION: Manufacturer: ULVAC, Inc., Japan Model No.: EWA-165 Type: Vacuum Roll Coater (Vacuum Metallizer) Application: Metallization of plastic films (PET/OPP/PE etc.) by aluminum evaporation Useful web width: up to 1650 mm Film thickness range: 12 μm typical.   POWER SUPPLY: Control / Main Units Power supply:  3Φ, 60 Hz, AC 380 V Rated power consumption (cabinet 1):  290 kVA Rated power consumption (cabinet 2):  160 kVA   VACUUM SYSTEM: Main Pumps Oil Diffusion Pump (Ejector type): Model:  ULVAC PBL-20 Power:  18 kW Fluid charge: 90 L Voltage:  380 V Water cooling requirement:  25 L/min (

Auction-ID: A1-44905-82

Hydraulic unit incl. wiring diagram Manufacturer: Aros Hydraulik GmbH Type: HE160-Z21/V5, 5-VAD22/V5, 5-B3/120-LV6P-so. Engines: Manufacturer: Asea motor Type: MBT 132s Power: 5.5 kW Frequency: 3 ~ / 50 Hz Manufacturer: Dietz-motoren GmbH & co. KG Type: 4001540 441883 Power: 5.5 kW Voltage: 380 V Current strength: 11,8 A Valve block: Manufacturer: Lenze Type: 14 128 10 1 0 S 0 Pump: Manufacturer: Sauer / Daikin Type: J V15SA4CRX85 Maximum pressure: 250 bar Filter: Manufacturer: Argo filter Type: HD 046 056 Capacity: 35 l / min Pressure: 210 bar max. New price: approx. 7900

Moulded Cones Machine Steinhoff HWA 54 Steinhoff/GAM/Haas Price: € 9.900 Machines # 79 Built: 1972 Number of baking tongs 21 Products per baking tongs 6 Location: Germany The machine is used to make moulded cones is sold with a tool for tulip squirrels. It is the predecessor of the Steinhoff EWA 65. The machine is currently in storage.

ERD Column Drill Type B35/40 -Manufacturer Ing. Ewald Riens, Junior, Bodenburg via Hildesheim -Machine type ERD B35/40 -Column drilling machine design with gear drive -Drilling performance in steel up to 50 mm -Spindle holder MK 4 (Morse taper 4) -Quill stroke 190 mm -Projection (spindle to column) 325 mm -Column diameter 140 mm -Table size approx. 565 × 565 mm -Table adjustment height-adjustable, rotatable (360°) -Speeds (spindle) 6-stage, manual via belt / lever - 670 / 470 / 295 / 210 / 150 / 90 rpm -Note on speed switching: Switching only in the outlet -Feed types: Manual and automatic feed -Feed speeds 0.1 / 0.2 / 0.3 mm per spindle revolution (switchable during the run) -Motor power 2.2 kW (three-phase current) -Supply voltage 400 V -Cutting speed table SS drill for material ST60 available (operating note) Dimensions: LxWxH: 0.9x0.5x2.05 meters / Weight 800 ...

ISO refrigerated container 20ft standard box, manufactured to ISO 1496-1 Type: 22R1 State - used and processed (on request new paintwork at an extra cost!) - Current PTI check - CSC approval - ready for immediate use Visit of our offered containers is possible at any time on site! Color Pure white RAL 9010 TECHNICAL DATA - Dimensions on the outside: (L x W x H) 6,058 x 2,438 x 2,591 mm - Dimensions inside: (L x W x H) 5,412 x 2,292 x 2,300 mm - Volume: 36.5 m3 - Weight: 2.88 t - Payload: 21.12 t - Temperature range: -25°C to +30°C - Refrigeration carrier: R134a - Power: 6-10 kW/h (indicative! Real values depend on several factors.) - Cooling unit: Carrier Streamline (2006 built), 380-460 V, 50-60 Hz, 5-pin plug/CEE 32A - Transportable and crane-capable - PTI check (= Pre Trip Inspection) function check - CSC safety approval SPECIAL USE / CONVERSION (on  ...

Double Column Machining Center TOSHIBA MPC-3180B Table mm.8000 x 2700 Distance between columns mm.3100 X mm.9000 Y mm.3900 Z Verticaal RAM stroke mm.900 W Vertical Crossrail stroke mm.1600 Automatic indexed every 5 degrees 5 face head Distance table to spindle nose mm.2440 Table load Kg. 20.000 Spindle speed 5-3000 rpm 2 ranges Spindle taper BT 50 Ram section 380 x 380 Machine dimensions mm.29110 x 9900 x 7260 Machine weight Kg. 151.000 Year 2007 Standard options : 5-face cutter head Automatic attachment (5-face cutter head or other attachments)index (AAI) (4-position index by 90.) Automatic tool loading/unloading device for vertical spindle and horizontal spindle) CNC controller including standard and pack specifications Pendant operation box with electrically-driven free arm Hydraulic unit Oil cooling unit (AKZ 908) Hydraulic crossrail servo balancing s ...

DAIKIN EPGA11DAV37 - 1 piece Auction-ID: A7-45157-4

BRAND: DMG GILDEMEISTER YEAR: 2008 MODEL: CTV 250 (V3) PRODUCTION HOURS: 44158 APPLICATION TYPE: TURNING LOCATION: HUNGARY MACHINE TYPE: LATHE AVAILABILITY: IMMEDIATELY Technical Information GENERAL DATA MEASUREMENTS WIDTH: 2720 MM MEASUREMENTS DEPTH: 4100 MM MEASUREMENTS HEIGHT: 2860 MM MACHINE WEIGHT: 8200 KG CONTROL UNIT BRAND: SIEMENS MODEL: SINUMERIK 840D MAIN DRIVE SPINDLE SPEED RANGE: 5000 1/MIN MOVEMENT X-AXIS MOVEMENT: 1100 MM Z-AXIS MOVEMENT: 300 MM C-AXIS MOVEMENT: 240 NM MM MEDIA CHIP CONVEYOR: YES Additional Information MACHINE BENEFITS TECHNICAL MACHINE BENEFITS: - Y (OPTIONAL): 20 000 N - TOOL HOLDER: ACCORDING TO DIN 69880 - CHUCK: 250 MM - TURRET HEAD: 12 POSITIONS - + EWAB PS800 CONVEYOR FOR PARTS/WORKPIECES

directional control valve, solenoid valve, hydraulic valve DAIKIN LS-G02-2NP-10-DN 12 5520 max. 160 bar max. 20 l/min 2x control solenoid: PD-2P 24 V DC used, tested ! Dimensions: 215 x 48 x 95 mm

The EWAB TS190 is a cutting-edge automated production system designed to streamline manufacturing processes while incorporating advanced laser technology. This versatile machine is equipped with a dedicated laser cell, enhancing its capabilities for precision cutting, engraving, and material processing. The integration of robotics, automation, and laser technology makes the EWAB TS190 a reliable solution for a wide range of industrial applications. Find more here - / Contact us at -

ANGER HCP 203 Production GENERAL Project No.: 905739 Quantity: 2 pcs. Manufacturer: ANGER Type: HCP 203 Control: Siemens 840 D Year of manufacture: 2005/2013 Condition: Used machine Layers Machine Approx (Hrs): 2 Layers DESCRIPTION There are 2 production lines available. Each production line consists of three ANGER multi-spindle machining centers, each of which is connected to a KUKA robot. The loading and unloading of the EWAB conveyor belt is located at the back of the machines. ANGER (1) - 5-axis: 4 vertical milling and drilling spindles at the bottom, 4 vertical milling and drilling spindles at the top, touch probe at the top, 4 horizontal milling and drilling spindles at the left. Workpiece carrier with three linear axes and two rotation axes. ANGER (2) - 5-axis: 4 vertical milling and drilling spindles at the bottom, 6 vertical milling and drilling spindl ...