7 COMPACTSYSTEM central heating installations used machines

L 45 Kw POWER 680 Kg/h (material-dependent/full load) Active process and computer-controlled Koller PP 300 is a pellet line consisting of the following machines: - DOSING SYSTEM with an automatic PLC control from the feed of the ground material incl. rotary valve - Hammer mill with sieve 6 mm for the wood chip raw material - Pellet mill with main motor 45 kW with automatic hydraulic control system (Eur.Pat. EP1619012B1). Patented system. The pressing process is completely monitored by a controller and monitored via mobile phone. incl. minisilo for loading with level sensor; Safety system for controlling the clogging of the matrice Moisture monitoring - Cooling and dedusting system for the pellets produced via a screw

L 22 Kw POWER 330 Kg/h (material-dependent/full load) Active process and computer-controlled Koller PP 300 is a pellet line consisting of the following machines: - DOSING SYSTEM with an automatic PLC control from the feed of the ground material incl. rotary valve - Hammer mill with sieve 6 mm for the wood chip raw material - Pellet mill with main motor 22 kW with automatic hydraulic control system (Eur.Pat. EP1619012B1). Patented system. The pressing process is completely monitored by a controller and monitored via mobile phone. incl. minisilo for loading with level sensor; Safety system for controlling the clogging of the matrice Moisture monitoring - Cooling and dedusting system for the pellets produced via a screw

L 30 Kw POWER 450 Kg/h (material-dependent/full load) Active process and computer-controlled Koller PP 300 is a pellet line consisting of the following machines: - DOSING SYSTEM with an automatic PLC control from the feed of the ground material incl. rotary valve - Hammer mill with sieve 6 mm for the wood chip raw material - Pellet mill with main motor 30 kW with automatic hydraulic control system (Eur.Pat. EP1619012B1). Patented system. The pressing process is completely monitored by a controller and monitored via mobile phone. incl. minisilo for loading with level sensor; Safety system for controlling the clogging of the matrice Moisture monitoring - Cooling and dedusting system for the pellets produced via a screw

l 90 kw POWER 1350 kg/h (depending on material/full load) Active process and computer-controlled Koller PP 500 is a pellet line consisting of the following machines: - DOSAGE SYSTEM with an automatic PLC control of the feed of the ground material incl. rotary valve - Hammer mill with sieve 6 mm for wood chip raw material - Pellet mill with main motor 90 kW with automatic hydraulic control system (Eur.Pat. EP1619012B1). Patented system. The pressing process is completely monitored by a controller and monitored via mobile phone. incl. minisilo for loading with level sensor; Safety system to control the blockage of the Matritze Humidity monitoring - Cooling and dedusting system for the pellets produced via a screw

MAX TRUNK DIAMETER 700 MM SUBSTRUCTURE LENGTH 6000 MM CUTTING LENGTH OF 4.8 METERS 5.5 KW MOTOR HYDRAULIC BELT TENSIONING

MAX TRUNK DIAMETER 1200 MM - CUTTING LENGTH 7800 MM - 11 KW/15 HP ENGINE - PRE-CUTTING AGGREGATE - AUTOMATIC FEED FOR SAWING UNIT - POSITIONING CONTROLLER ISP 010 - Supply voltage - 400 V, 50Hz - Vertical chain stroke up / from 30 mm / 1s with gear motor - horizontal / vertical cutting head spacing in one cut - 1150/280 mm - Longitudinal feed of the cutting head - Liquid inverter 0-40 running meters / min - maximum dimension of the cut Logs up to 1200 mm - Saw blade width - 32-35 mm - Saw blade length - 4,800 mm - Cutting thickness -1.5-2.5 mm - Diameter impellers - 475 mm - Substructure made of closed 120 x 120 x 5 mm profile - Columns supporting the wood were made of a profile of 80 mm x 160 mm x 4 mm - Diameter of the processing log up to 1200 by turning

Table length 1480 MM Table width 600 MM Table height adjustment stroke 600 MM Engine 2 hp – 1.5 KW Band length Max Min 3950 MM-3800 MM Bandwidth 100 MM Belt speed 24 m/sec Weight CA 250 KG Space requirement 180 X 100 X h 170 cm CE version

Vertical panel saw with pliers Cutting length 5200 mm Cutting height 2200 mm cutting depth 70 mm Saw blade diameter 300 mm Scoring unit incl. adjustable Automatic sliding erost

Compact small briquetting press CA 10-15 KG/H Diameter of the briquettes approx. 55 mm 2.6 KW POWER CONSUMPTION V 230/50 CAN BE OPERATED WITH HOUSEHOLD ELECTRICITY BUT ALSO OPERABLE WITH V400/50 AND ZERO-WIRE PLUG ADJUSTABLE PLIERS Machine for do-it-yourselfers or small craft businesses Space requirement approx. .170x50x100cm, Weight 90kg

l 45 kw POWER 680 kg/h (depending on material/full load) Active process and computer-controlled Koller PP 300 is a pellet line consisting of the following machines: - DOSAGE SYSTEM with an automatic PLC control from the feed of the ground material incl. rotary valve - Hammer mill with sieve 6 mm for wood chip raw material - Pellet mill with main motor 45 kW with automatic hydraulic control system (Eur.Pat. EP1619012B1). Patented system. The pressing process is completely monitored by a controller and monitored via mobile phone. incl. minisilo for loading with level sensor; Safety system to control the blockage of the Matritze Humidity monitoring - Cooling and dedusting system for the pellets produced via a screw

l 45 kw POWER 680 kg/h (depending on material/full load) Active process and computer-controlled Koller PP 300 is a pellet line consisting of the following machines: - DOSAGE SYSTEM with an automatic PLC control from the feed of the ground material incl. rotary valve - Hammer mill with sieve 6 mm for wood chip raw material - Pellet mill with main motor 45 kW with automatic hydraulic control system (Eur.Pat. EP1619012B1). Patented system. The pressing process is completely monitored by a controller and monitored via mobile phone. incl. minisilo for loading with level sensor; Safety system to control the blockage of the Matritze Humidity monitoring - Cooling and dedusting system for the pellets produced via a screw

Dimensions (L/W/H): 600x800x1900 mm Weight: 230 kg Total power requirement: 0,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 800x1170x2300 mm Weight: 650 kg Total power requirement: 1,05 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 800x1170x2280 mm Weight: 500 kg Total power requirement: 1 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 600x800x1900 mm Weight: 230 kg Total power requirement: 0,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 1700x2000x2550 mm Weight: 1400 kg Total power requirement: 4,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 720x1000x1900 mm Weight: 300 kg Total power requirement: 1,2 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 1300x1700x2550 mm Weight: 1200 kg Total power requirement: 2 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

For logs / logs, the BBS750 machine is a loyal partner. The performance of the sawmill depends on the thickness of the planks and beams. However, the average volume throughput can be estimated at 1-1.5 cbm/h. The Bockbandsäge Bochsäge sawmill is used by forest farmers and other wood processors and is used as an entry-level saw. Technical data: - Weight: approx. 600 kg - Machine dimensions: width approx. 220cm - height approx. 170cm  - Total length:600cm (in standard version but also extendable) - Cutting length: 480cm - Main motor power: 5.5kW - Power requirements:

HOT AIR GENERATOR model FABBRI F240 second hand machine with n.01 additional fan for fumes expulsion with piping for hot air conveyance CE marks: Yes volt. 380 / 50 APPROXIMATE SURFACE TO HEAT UP: m² 1.000 main fan electrical motor power Hp 4 additional smoke expulsion fan motor power Hp 0,75 Hot Air Generators are suitable for the combustion of wood and all solid fuels allowed by law. Horizontal oven made of thermal chrome plated stainless steel, reinforced with ribs. Exchangers 2 or 3 smoke revs. Inner side made of bright sheet metal for casing and insulation. Outer side made of zinc plated sheet metal. Frame made of painted profile. Feeding doors with refractory and extractable grates. Panels with refractory for pipes cleaning. Double suction centrifugal fans for hot air delivery running at low regime of turns and arranged on special elastic suspensions driven by on ...

Heating system Fabr. Endress Type USF-W 350 Power: 350 Kw Bj.2010 with loading with ash discharge with control with bunker discharge Fabr. Nolting Type BAS 250 Year: 1985 with briquetting press Fabr Reimann Type 450/30 built in 1985

Steam boiler white Year of Make: 1994 last MOT 2024 Power 6000 kW permissible. Operating overpressure 1.0 bar permissible. Superheated steam temperature 120 degrees Celsius Boiler capacity at N-W 16670 ltr. for firing with chips and wood chips incl. oil burner as a replacement fire option

Binder heating system Wood chip heating Type RRK 640-850 Year of construction 2013 For steam and hot water production Heating capacity up to 850 kW Maximum operating temperature up to 150 °C Maximum operating overpressure 12 bar Water capacity 1520 litres Hydraulic insertion from the right front side (instead of stoker auger) Heat exchanger separately Without material feed from the bunker Flue gas cleaning via cyclone

Mawera heating system Wood chip heating Type FU 550 RIA Year of manufacture 2001 Heating system for wood chips Insertion with feed screw Stoker screw Heating capacity up to 550 kW Including dismantling and loading

Pre- and post-heating coil, air heating element, DN125, 371550, LHE 125 IS, Dimplex, new Special price !! We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece, there is still a great discount. If you have a VAT number, we will gladly issue you an invoice without VAT. Mint condition in original packaging! The part was purchased from a spare parts warehouse of a company and has never been in operation, is in a completely mint condition and in its original packaging. Dimplex - 371550 - LHE 125 IS Air heating element Electric pre- and post-heating. 0.75 kW electric heating coil (power-controlled) for pre-heating the outside air or post-heating the supply air, thermally insulated, with temperature switch adjustable from -30°C to +30°C, air flow monitor for detecting the smallest air flows at minimum operation and two safety te ...