used BATTENFELD tm

Battenfeld TM3500/1900 Injection moulding machine Used battenfeld machine for sale, machine is unplugged, but it was in good working condition

Clamping force [kN] 4500 Dimensions of mounting plates (hxv) [mm] 1155x1195 Clearance between columns (hxv) [mm] 800x800 Min./max. mold height [mm] min 425/max 770 Maximum opening width [mm] 1530 Injection unit Screw diameter [mm] 75 Injection volume [cm3] 1657 Injection weight [g] 1506 Injection pressure [bar] 1739

Battenfeld HM 240 1330 2011 Battenfeld TM 400 2250 2009 We have 2 thermoset injection machine to sell. Battenfeld BCT 1800-1000 year 1994 (with Robot) Battenfeld BCT 1800-1000 year 1993 TM 27001900 BA 600200 CDC TM35001330 BA 1000 BKT THERMOSET INJECTON MACHINES Thermoset Inj. Machine- I Thermoset Inj. Machine- II With Battenfeld Robot BATTENFELD BCT 1800/100 BATTENFELD BCT 1800/100 Construction Year 1993 1994 Screw Diameter Ø60 mm Ø55 mm Clearance between tie bars 515 x 515mm 515 x 515mm Day light 1.000mm 1.000mm Working Hours 81814 h 57929 h Also: Name Battenfeld Battenfeld Type of machine HM-E 240/ 1330 INSIDER TM-E 400/2250 Control system Unilog B6E Unilog B6 Year of manufacture 2011 2009 operation hours 17 254 11 288 Cla ...

- Battenfeld Unilog 4000 display - Battenfeld Unilog 4000 claviatura - Battenfeld Unilog 4000 TFU 400 card - Battenfeld Unilog 4000 rack - Battenfeld Unilog 4000 CPST 203 card - Battenfeld Unilog 4000 CPEA 200 card - Battenfeld Unilog 4000 ELIF 400 card - Battenfeld Unilog 4000 CC10 card - Battenfeld Unilog 4000 SNT 411 power supply - Battenfeld Unilog 4000 UTR 300 card

Important Note: The following description provides additional technical details about the Battenfeld TM 1300/525 M Injection Molding Machine beyond the core offer. This information is intended to assist buyers in making an informed decision. Core Offer: For professionals seeking a reliable injection molding machine, the Battenfeld TM 1300/525 M offers exceptional performance. Its specifications include: Clamping Force: 1300 kN Mounting Plate Dimensions (hxv): 670 x 670 mm Clearance Between Columns (hxv): 470 x 470 mm Min./Max. Mold Height: 225-500 mm Maximum Opening Width: 930 mm Injection Unit: Screw Diameter: 40 mm Injection Volume: 251 ccm Injection Weight: 228 g Injection Pressure: 2100 bar Electrical and Hydraulic Equipment: Rated Power of the Pump Motor: 18.5 kW Heater Power: 12.1 kW Dimensions (L x W x H): 4.9m x 1.33m x 2m Net Weight with Control Cabinet: 4.8 ...

Offer Injection moulding machines Wittmann Battenfeld CM 40/210 Unilog B8 Year 2018 The display will be updated even further. We offer the following injection molding machine from a restructuring of our customer: CM 40/210 Unilog B8 138744-100 Fig. 1-7 Specifications: Voltage: 230/400V/3p 24V control Supply line Nennatrom 1/2.: 51/34 A Pneum. Pressure range: 6-8 bar Specifications: Voltage: 230/400V/3p 24V control Supply pipe:? A Pneum. Pressure range: 6-8 bar Operating hours:

Offer Injection moulding machine Wittmann Battenfeld SmartPower 110/130H/130L 2K with robot, turntable, conveyor belt Year of construction 2018 The display will be updated even further. We offer the following injection molding machine from a restructuring of our customer: 1. SmartPover Combimould 110/130H/130L Unilog B8 1387649-100 (2 K) with robot, turntable (separate), conveyor belt, danger zone demarcation Figure 1 - 8 Specifications: Voltage: 230/400V/3p 24V control Supply line 1/2: 100/50A Pneum. Pressure range: 6-8 bar Operating hours: 4643 Weight: 6000 kg Injection unit: 130 Screw D: 25mm, LD ratio 22 Spray pressure: 2218 bar Displacement: 61.4 cm³ Injection weight (hp): 55.8 g Injection unit: 130 Screw D: 18, LD ratio 22 Spray pressure: 3000 bar Displacement: 22.9 cm³ Injection weight (hp): 20.8 g Clamping unit: 1100 kN Tie bar distance: 52 ...

Offer Injection moulding machine Wittmann Battenfeld SmartPower 180/525H/210L 2K with turntable, conveyor belt year of construction 2018 The display will be updated even further. We offer the following injection molding machine from a restructuring of our customer: 1. SmartPover 3Combimould 180/525H/210L Unilog B8 139036-100 (2 K) with turntable (separate), conveyor belt, danger zone demarcation Figure 1-8 Specifications: Voltage: 230/400V/3p 24V control Supply line 1/2: 125/50A Pneum. Pressure range: 6-8 bar Operating hours: 2995 Weight: 8750 kg Injection unit: 525 Screw D: 35mm, LD ratio 22 Spray pressure: 2743 bar Displacement: 193 cm³ Injection weight (HP): 175 g Injection unit: 210 Screw D: 35mm, LD ratio 22 Spray pressure: 1500 bar Displacement: 144 cm³ Injection weight (hp): 131 g Clamping unit: 1800 kN Tie bar distance: 570x520 mm Tool ins ...

warehouse no.: 501525 manufacturer: BATTENFELD Typ: Druckplatte 4505715 year of construction: 2012 We offer a mould plate / pressure plate for injection moulding machine from BATTENFELD for model HM II 4500, number 4505715. Pressure plate for injection molding machine Battenfeld HM series II 4500, Art. Nr.: 4505715th printing plates include injection molding machines to the highly stressed machine parts. The pressure plate is offered immediately from stock in Langenfeld (Rheinland), available

The BATTENFELD BA 600 CDC injection molding machine was built in Austria in 2002. It is equipped with Unilog B4 control. It has a closing force of 600 kN forms. The screw diameter is 33 mm and the injection volume is 99 cm3. The machine has plates for mounting injection molds with dimensions of 511 x 511 mm, and the clearance between the columns is 320 x 320 mm. The injection molding machine is equipped with a receiving robot, hot runners, a conveyor belt for collecting moldings, four pillows, a string of cores and technical documentation. Technical parameters of the BATTENFELD BA 600 CDC injection molding machine – control: Unilog B4 – dimensions of tool plates: 511 x 511 mm – clearance between columns: 320 x 320 mm – tool height, min. : 150 mm – opening path: 511 mm – injection pressure: 2022 bar – injection volume: 99 cm3 – injection weight: 90 g – screw  ...

Wittmann Battenfeld Injection Moulding Machine Here we offer you a SmartPower 210/1330 Thermoset machine. Wittmann Battenfeld injection moulding machine with UNILOG B8 control system Plant was serviced by the manufacturer WITTMANN BATTENFELD Deutschland GmbH in January 2021 / checked and brought up to date As part of the complete review, various updates were installed and the hydraulic oil (600 liters) was refilled. In addition to the already normally existing pressure switches, the system consists of the possibility to install additional internal mold pressure switches 2 pieces Kistler module for mold internal pressure switching range 1: 20,000 pC, range 2: 10,000 pC). The parts for the upgrade mold internal pressure switches are part of the scope of delivery. Injection molding machine: Series: SmartPower Machine type: 210/1330 Control type: UNILOG B8 Machine number: ...

Injection molding machine by Battenfeld Wittmann. The injection molding machine is from 2018 and has been with us since the news, serviced only in Battenfeld Polska, full history, documentation. The injection molding machine has only 6600 hours of working life. Injection molding machine like new. Upper injection unit - not used, turntable - not used. screw diameter mm 30 specific injection pressure bar 2042 calculated injection volume ccm 106 screw L / D ratio 22 plasticization efficiency g / s PS 12 air injection speed - standard ccm / s 85.7 Cylinder heating system power kW 10.4 SmartPower Rotary Table Table diameter mm 750 Table height mm 140 Table weight kg 1,200 Time of table rotation by 180 ° sec 1.2 Max weight of the mold kg 600 Number of connections 4 x G3 / 8 Max weight of the mold on the turntable kg 1,000 power of the drive system kW 37 oil tank cap ...

Battenfeld injection moulding machine Type: BA 8000 / 7700 HM, 12146 h Runhour! Control: Unilog 9000 C year of manufacture: 1997 Clamping unit Clamping force t 800 gap mm: 1250 Holm dimension mm: 1750 x 1530 min/max height mm: 500 / 950 Plate size: 1750 x 1530 injection unit Screw diameter mm: 100 injection weight gr: 3574 Injection volume cm m³: 3927 spray pressure bar: 1960 Dimensions and weights Machine weight kg: 42,000/14,500 other Weight injection unit 14,500 kg dimensions (L x B x H) 6.00 x 1.72 x 2,20 m weight clamp unit 42,000 kg dimensions (L x B x H) 5.65 x 2, 80 x 3.36 m with Battenfeld robot

Battenfeld injection moulding machine Type: BA 8000 / 7700 HM, 12757 h Runhour! Control: Unilog 9000 C year of manufacture: 1996 Clamping unit Clamping force t 800 gap mm: 1250 Holm dimension mm: 1750 x 1530 min/max height mm: 500 / 950 Plate size: 1750 x 1530 injection unit Screw diameter mm: 100 injection weight gr: 3574 Injection volume cm m³: 3927 spray pressure bar: 1960 Dimensions and weights Machine weight kg: 42,000/14,500 other Weight injection unit 14,500 kg dimensions (L x B x H) 6.00 x 1.72 x 2,20 m weight clamp unit 42,000 kg dimensions (L x B x H) 5.65 x 2, 80 x 3.36 m with Battenfeld robot

Battenfeld TM Xpress 270/1350 injection molding machine is on sale 2011 Battenfeld TM Xpress 270/1350 Injection molding machine

Used Battenfeld machine for sale, old but low hours Battenfeld BK-T 1800/1000 Injection moulding machine

Battenfeld TM 1300/750 injection moulding machine 130 tons Width between columns 47cm, height 46cm Brand: Battenfeld 2000 model

Stock No.: 503007 Manufacturer: BATTENFELD Type: HM 10000-9200 Control: UNILOG B4 Year of construction: 2003 Operating hours: 67092 h Technical data closing page Clamping force: 10000 kN Holmass v: 1120 mm Holmass h: 1400 mm Panel size h: 1960 mm Panel size v: 1690 mm Installation height min.: 550 mm Installation height max.: 1020 mm plate pitch: 2120 mm Opening distance: 1100 mm Ejector stroke: 300 mm Ejector force: 118 kN Centering movable plate D: 250 mm Centering fixed plate D: 315 mm Technical data spray side Screw diameter: 120 mm Displacement: 5655 cc Spray pressure: 1632 bar Screw length: 22 l/d Screw stroke: 500 mm Screw speed: 130 min Screw torque: 11370 N Plasticizing current: 144 g/s PS Injection flow to the outside: 1144 g/s hp Number of heating zones: 8 Nozzle travel: 700 mm Dimensions & Weight Machine dimensions LxWxH: 11.6m x 2.9m x ...

Blow moulding machines Battenfeld Fischer Machine Manufacturer: Battenfeld Fischer Machine No.: 4344 Built: 1989 Location: Europe Extruder: 50/20D Monitor language: Manual timer only (icons)

Blow moulding machines Battenfeld Fischer Machine Manufacturer: Battenfeld Fischer Machine No.: 4491 Built: 1990 Location: Europe Monitor language: Manual timer only (icons)

Blow moulding machines Battenfeld Fischer Machine Manufacturer: Battenfeld Fischer Machine No: 4362 Built: 1988 Location: Europe Extruder: 50/20D Monitor language: Manual timer only (icons)

Blow moulding machines Battenfeld Fischer Machine Manufacturer: Battenfeld Fischer Machine No.: 4547 Built: 1990 Location: Europe Monitor language: Manual timer only (icons)

Blow moulding machines Battenfeld Fischer Machine Manufacturer: Battenfeld Fischer Machine No.: 4392 Built: 1989 Location: Europe Extruder: 50/20D Monitor language: Manual timer only (icons)

Manufacturer | manufacturer: Battenfeld Fischer Machine Type | machine type: VK 1-20 Stations | stations: Einstation / Single Year of construction | Built: 1985 Location | Location: Europa/ Europe Clamping force | Clamping force: 180 kN Control Type | control system: Siemens S7 + Beckhoff for WDS & PWDS Extruders | Extruder: 80/20D Extrusion Head | Extrusion Head: S1-120 (Original Battenfeld) Mould dimensions mm | Mold dimensions mm: 480/540/2*155 Bottle volume max. | bottle volume max.: 20 L On-Screen Language | monitor language: German/ Deutsch Delivery time | Delivery time: 2-4 weeks

Haul-off and saw combination, consisting of: 1 x Caterpillar haul-off Manufacturer: Battenfeld Type: P250-SX-2400 Year of construction: 1992 Contact length, effective: 2200 mm Pad width: 250 mm Haul-off force, max.: approx. 30,000 N Speed: max. 8.0 m/min. Connected load: approx. 6.0 kW 1 x Saw Manufacturer: Battenfeld Type: SPR-125 Year of construction: 1992 Profile cross-section, max.:230 x 90 mm or 160 x 110 mm Pipe diameter: max. 125 mm Saw blade diameter: 420 mm Travel distance:1000 mm Working speed: max. 20 m/min. Cutting capacity: 15 cuts/min. Saw motor: approx. 1.5 kW