AVK dig used machines

For sale is an AvK DIG 130 k/4 generator with the serial number 83 31639 A101. This model was originally paired with a Jenbacher 612 engine with design number R049. The generator has an output of 3,000 kVA at an output voltage of 6,300 V. The year of construction is 2013, the operating hours so far are 60,000. A Megger test was performed. The price of this generator is 15,000 euros. For more information or to arrange a viewing, please contact us.

For sale is an AVK DIG 130 i/4 generator with the serial number 84 27538 C104. This model was originally paired with an MWM TCG 2020 V20 engine. The generator has an output of 2,500 kVA at an output voltage of 11,000 V. The year of construction is 2006, the operating hours so far are 51,800. For more information or to arrange a viewing, please contact us.

AvK DIG 130 g/4 - Unused - 1500 kVa

AvK Synchronous Generator DIG 120 h/4 1370 KVA 10500 V 75 A 50 Hz, 1500 rpm. Accessories: - 2 sets Winding PT100 - DM110 Digital Regulator NEW Condition (NEW)

AvK Synchronous Generator DIG 110 i/4 1080 KVA 10,000 V 62 A 50 Hz, 1500 1/min. Accessories: - 2 sets Winding PT100 - Cosima N+, QPF, CUN Completely overhauled with new bearings.

Application: mechanical conversion of different frequencies Generator by AVK Type: DSG62L-4 Year of construction: 2002 Current type: AC Voltage: 1000/577 V Current: 577/1000 A Power: 1000 kVA Motor from Siemens Voltage: 500 V Current: 430 A Frequency: 50 Hz Speed: 1488 rpm

AVK generator , alternator 2840 kva 400volt year 2008

AvK Synchronous Generator DSG 99 M1-4 3324 KVA 690 V 2781 A 50 Hz, 1500 1/min. Accessories: - 2 sets Winding PT100 - DM110 Digital Regulator GOOD CONDITON - Completely overhauled. According to INNIO_JENBACHER Spec.

Converters for bottle vibrators, vibrating bottles, internal vibrators, concrete vibrators -Manufacturer: Wacker -Handover: as is as seen -Carriage: Impeller damaged, see photo -Motor: 2 kW -Vibrating bottle: length 430 mm -Hose length: 6 m -Dimensions: 1380/580/H600 mm -Weight: 87 kg

Digital Screw Gauge from Mitutoyo 400-425 mm Overgrip new in the original wooden box with test certificate

Mitutoyo 570-313 Digital Height ruler

Brown & Sharp Tesa Hite 350 Digital Height Gauge 007.30041

Mitutoyo HDS-G24 Digimatic Height Gauge HDS

Mitutoyo HDS-G24 Digimatic Height Gauge HDS

Mitutoyo HDS-G24 Digimatic Height Gauge HDS

Mitutoyo HDS-G24 Digimatic Height Gauge HDS

LeoMat Digitakt 330 SFR – Slitter/Rewinder/UV-Flexo/Laminating  Year of manufacture: 2011  Servo drive  Job memory up to 50 jobs  Register control: Semi- and fully rotary  electronic motor control  Electronic web edge control  Waste and misprint stop  Unwind shaft: d=76mm  Unwind diameter: 700mm  Rewind shaft: d=76mm  Rewind diameter: 550mm  Automatic web stop at machine stop  Flexo printing unit GALLUS EM 340  Web width: 340mmm  Cliché 1.14mm  Fully rotary register control including servo drive  Die-cutting and printing of materials  UV drying  Web width: 410mm  Laminating  Pressure station mounted on printing cylinder  Punching unit LeoMat L  Adaptation of the GALLUS R250 magnetic cylinder  Rotometrics impression cylinder  Grid rewind servo driven  Integrated edge trim sucti ...

Digital charging grate 24Volt 140 Ampere!!! Very strong charging for large batteries! Charging for forklift battery suitable for 12 cells 24 Volt 140 Ampere good condition More used loaders 24Volt, 48Volt, 80 Volt from 55 amperes to 200 amperes at the camp, please ask. Special price

Weibert form7 52 digital Dressing thickness Planer Planing width 520 mm Tersa 4 drum Dressing table length 2250 mm Planing stroke 1500 mm 90 °-45 ° Machine cast iron tables 7 KW (9,5 HP) 400V 50 HZ Thicknessing table 850x520mm Passage of 3 / 240mm Electrical height adjustment of the Thicknesser table 4 speeds 5 / 8 / 12 / 18 m / min Dual opening system of the tables to the rear Max depth of cut 5 mm Speed 5000 min/1 1-suction port 120 mm Weight approx. 700 kg G & PIECES 5503511

Carestream (Kodak) Direct view DR 9000 with the following system components: * Generator Fischer Imaging Corp. DX 80 HF * Tube Dunlee DU 404 0.6/1, 2_year of manufature 2004 * 1 x detector Trixell Pixium 4600_year of manufacture 2004 * separate X-ray table • The system was tested before dismantling of our employees on site. • It is located in our warehouse in Germany, packaged on pallets properly lashed down and wrapped in stretchfoil and can be picked up immediately. • You buy the equipment in "as in" condition from stock Freiberg (EXW), Saxony, Germany, and prepayment. • The sales take place as "used" to resellers or distributors, despite full functionality without warrenty/guarantee. • Installation and commissioning must only be performed by specialist staff with the appropriate qualifications.

GE Revolution XR/d with the following system components: * Generator Jedi 80 * tube MX 100 0.6/1.25 * 1 x detector 41cm 41cm * separate mobile X-ray table company Zetta • The system was tested before dismantling of our employees on site. • It is located in our warehouse in Germany, packaged on pallets properly lashed down and wrapped in stretchfoil and can be picked up immediately. • You buy the equipment in "as in" condition from stock Freiberg (EXW), Saxony, Germany, and prepayment. • The sales take place as "used" to resellers or distributors, despite full functionality without warrenty/guarantee. • Installation and commissioning must only be performed by specialist staff with the appropriate qualifications.

Tip width: 700 mm Tip height: 150 mm Circulation diameter over bed: 300 mm Bed width: 180 mm Spindle bore: 38 mm Mounting in the spindle bore: MK 5 Speed range, infinitely variable: 30 - 450 / 150 - 3000 rpm Range of longitudinal feeds: (14) 0.07 - 0.65 mm/U Area of plan feeds: (11) 0.03 - 0.12 mm/U Metric threads: (18) 0.2 - 3.5 mm Inch Thread: (21) 8 - 56 Gg/1" Pinole path: 85 mm Pinole holder: MK 3 Engine power S1 100%: 1.5 kW / 400 V Motor recording power S6 40%: 2.2 kW / 400 V Machine dimensions (W x D x H)*: 1380 x 640 x 500 mm Weight approx.: 235 kg * without base Delivery: - Digital display - 3-jaw chuck PO3-160 mm steel version - Feed flange 160 mm - Solid grain tips - Interchangeable wheels - Quick-release steel holder size 20-2 with 2 straight inserts - Slip clutch - Micrometer longitudinal stop - Plan sled with top support - Frequency invert ...

Siemens AXIOM Aristos FX Plus with the following device components: Generator Polydoros LX 30/50 Tube Opti 150/30/50 HC 0.6/1,0_Year of manufacture 2014 (ceiling-hanging) Vertical stand Aristos FX (ceiling-hanging) 1 Detector Trixell Pixium 4600 43x43 cm_Product No. 100204 • The system was tested before dismantling of our employees on site. • It is located in our warehouse in Germany, packaged on pallets properly lashed down and wrapped in stretchfoil and can be picked up immediately. • You buy the equipments in "as in" condition from stock Freiberg (EXW), Saxony, Germany, and prepayment. • We are a used medical device dealer. We do not service or refurbish any of the items that we sell. All items are sold used and in as-is condition, unless otherwise stated. We do not offer or imply any guarantees or warranties on any equipment sold. It is the responsibility of the b ...

Universal milling machine vertically / horizontally from a training workshop Manufacturer Hermle Type FW801 Tool holder SK40 automatic feed in three axes Digital display in three axes Machine technically in very good condition under electricity ready for demonstration Technical data: Travel: x=350mm y=150mm z=220mm Spindle speeds from 50 to 3,150 rpm can be infinitely variable Feed speed infinitely adjustable via rotary pot from 10 to 5,000 mm/min, aisle Special price Used milling machine Hermle FW 801

Item number 90045-0337 Engine control card, engine control