used ARMINIUS st

Manufacturer: Arminius Leistenfräs und Schleifmaschine 2 Maschine verstellbares Bett, Type: SP 39, Year: 1994, Monting of the machine: 2 X Fräsen/2 X vertikal schleifen/2X horizontalschleifen/Radiusshleifen schwenkbar/2 Radius schleifen oben/unten, Sanding width mm: 120, Sanding hight mm: 120, Sanding belts horizontal/bottom: keine, Sanding belts horizontal/longitudinal: 5, Sanding belts horizontal/traverse: no, Number of sanding belts left: 6, Sanding belts on right, qty.: 6, Bandschleifaggregate Stk.: 10, Bürstenaggregate Stck.: no, Right side units Qty.: linke und rechte Seite sind gleich Bestückt, Unit 1 tiltable: Zerspaner, Unit 2 slewable: rechts und links Profifräse, Aggregat 2 kW: ca. 2,2 , Unit 3 slewable: rechts und links Kantenschleifen Vertikal/nicht schwenkbar, Aggregat 3 kW: 1,5, Unit 4 slewable: rechts und links Kantenschleifen Vertikal/nicht schwenkbar, Aggregat 4 kW ...

Manufacturer: Arminius, Type: ST 2, Year: 1991, Control: Hand, Table length: 2000, Work piece hight min-max mm: 10-60, Feeding speed min-max m/min: 5-25, Controllable slewable: yes, Number of sanding units: 2, 1st sanding motor controlled and tiltable: Schleifscheiben Typ Arminius, Power kW: 1,1, 2nd sanding motor controlled and tiltable: Schleifscheiben Typ Arminius, Power kW: 1,1, Power kW: 1,1, Power kW: 1,1, Control panel at bottom: yes, Hight adjustment by hand wheel: yes, Year :1991

Manufacturer: Arminius Topfbohrautomat, Type: ST-10/S, Year: ca.1995, Control: hand, Function: Toploch Bohrautomat, One or two Spot machine: Einplatz, Working range X: 1500, Working range Y-axis: ca.100, Working range Z: 60, Drilling supprt from bottom: yes, Year :ca.1995

Manufacturer: Arminius Kantenschleifmaschine, Type: SP 33, Year: ca.1993, Monting of the machine: Bürste/längs/längs/radius oben, Sanding belt hight: ca.50, Sanding belt length max mm: 2150 X 50, Work piece hight min-max mm: 8-50, Work piece width min-max mm: 75, Feeding speed min-max m/min: 5-15, Length of the machine mm: ca.4500, 1st sanding motor controlled and tiltable: Bürste, Frequency controlled: regelbar, Power kW: 0,75, 2nd sanding motor controlled and tiltable: yes, Frequency controlled: regelbar, Power kW: 0,75, 3rd sanding motor controlled and tiltable: yes, Frequency controlled: regelbar, Power kW: 0,75, Frequency controlled: regelbar, Power kW: 0,75, Belt clamping pneumatically: yes, Hight adjustment by hand wheel: yes, radius sanding device: oben, Oscillation: yes, Hight adjustment: yes, Year :ca.1993

Manufacturer: Arminius Fräs und Kantenschleifmaschine, Type: SP 12, Program: yes, Axis control: no, Work piece width min-max mm: 60-500, Min.-max. workpiece height in mm: 10-60, Work piece length min-max mm: 100, Sanding hight mm: 120, Surface sanding units: 1, Profile sanding units: 2, Phase units: 2, Monting of the machine: Fräsen/Schleifen von oben/gerade schleifen/Phase/Phase/Bürste/Bürste, Unit 1 tiltable: yes, Unit 1 Kw: 2,2, Unit 2 slewable: no, Unit 2 Kw: 2,2, Unit 3 slewable: no, Unit 3 Kw: ca.2,0, Unit 4 slewable: yes, Unit 4 Kw: ca 1,0, Unit 5 slewable: yes, Unit 5 Kw: ca. 1,0, Unit 6 slewable: Bürste, Unit 6 Kw: Bürste, Shoes electr. controlled: yes, Constant table hight: yes,

equipped with: -2 milling units -1 long belt sanding unit -3 buffing units/profile grinding units

Working height: 860mm, workpiece height: 2-100mm, length: 2670mm, width: 1200mm, including controls and documentation.

Profile edge grinding and milling machine, edge grinding machine, edge grinder, grinding machine -with: copier -Number: 1x grinding head -Power: 1.1 kW -Speed: 500-1500 rpm -Sanding head in thickness: adjustable -Max. Workpiece thickness: mm -Max. Corner radius: mm -Dimensions: 1200/1420/H1520 mm -Weight: 656 kg

Profile edge grinding and milling machine, edge grinding machine, edge grinder, grinding machine -with copier -2x: milling heads -Power: 1.5 kW -Speed: 3000-6000 rpm -1x: grinding head -Power: 1.1 kW -Speed: 500-1500 rpm -Milling and grinding heads in thickness: adjustable -Max. Workpiece thickness: 40 mm -Max. Corner radius: 40 mm -Dimensions: 1200/1600/H1520 mm -Weight: 782 kg

In continuous flow with 2 + 1 grinding units, belt feed

Description: Profile grinding wheel, hold-down device, CNC mounting shaft HSK 63 F In addition, unused slip rings Approx. Onsite Dimension. (l x w x h): 400 x 200 x 200 mm, weight approx.: 10 kg

-Hot air oven Torero Store 4 -for 4 sheets 60x40cm -Built in 2012 -10 kw -2 floors Matador Store 6.4 -per floor one sheet 60x40cm -Built in 2012 -per floor 6.7 kW -Base 6.4.600

- Condition: used

Disc Valve, Flap Valve, Ball Valve, Butterfly Valve, Globe Valve, Slider, Pneumatic Control Valve, Angle Seat Valve, Valve -Manufacturer: ARI Foxboro, pneumatic control valve -Control valve: type ARI-Stevi 451 -Positioner: Foxboro ARI-Stevi 451-BIDS7ZZZNA -Connection: DN50 PN16-25 -Quantity: 3x control valve available -Price per piece -Dimension: 710/300/H270 mm -Weight: 31 kg

Used bread roll line BACK TECH, type: Mega-Star -in bakery condition- For Kaiser rolls - 5 rows - Head machine Mega-Star - Pre-proofing cabinet with Vario-Star moulded pastry system - Post-proofing oven CombiStar - 5 rows - Weight range: approx. 30 - 125 g - in stainless steel version - Computer control - Settling on sheets (5 rows x 9) - Condition: Good, ready for immediate use Viewing and test run are possible by arrangement.

new unit, vertical designed roller sizes : D = 355 x 900 mm width with post-cooling rollers with edge-trim device with puller, comeplete unit moveable by motor

Ladies and gentlemen, we offer: Machinery and equipment for stone production All prices are from Station World and the dismantling and all follow-up costs are to be made by the buyer. VAT is not included in the prices. The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been legally signed. Mistake reserved. All technical details; Measurements, etc., are approximate information and are non-binding for the provider. The technical data are manufacturer or operator information and therefore non-binding for us. Used material is sold to the exclusion of any warranty. We do not accept any liability for used material. Warranty exchange and return are excluded. Customer protection is agreed between the parties. The entire process of dismantling and loading as well as transport is carried out at the buyer's own ex ...

Hexagonal socket wrench SW 10 x 7 mm deep, blade made of chrome - vanadium - steel and chrome-plated, blade length approx. 125 mm, shaft D = 8 mm, head D = approx. 14.80mm transverse stitch 90 mm made of polyamide GF 30,total length approx. handle approx. 155 mm. Caption on the cross handle: Made in Germany and on the blade Crom Vanadium 10 There is still a residual stock of approx. 600 pieces available. IT can also be dispensed smaller batch sizes. 1 - 600 pieces / VS €/piece

- Arbeitsbereich X - Achse 1300 mm - Arbeitsbereich Y - Achse 2500 mm - Arbeitsbereich Z - Achse  300 mm - Spindel 3,0 kw, luftgekühlt, ER 32 - Spindel Drehzahl stufenlos 0-18.000 rpm - Verfahrsystem (X & Y Achse) Zahnstangen-Ritzelantrieb - Verfahrsystem (Z Achse)     Kugelrollspindel - Führungssystem (X,Y,Z)      Linearführung - Verfahrmotoren Step Motoren - Max. Verfahrgeschwindigkeit 20 m/min) - Graviergeschwindigkeit 3000 mm/min - Arbeitsgenauigkeit    0.05 mm - CAD/CAM Software Vectric CUT2D PRO  (NESTING Inclusive) - Steuerung DSP oder MACH3 - Schnittstelle    USB - Elektroanschluss 3 Phasen 400 V, 50 Hz - Betriebsumgebungstemperatur 0-45CC - Abmessungen Breite    2000 mm         - Abmessungen Länge   3200 mm         - Gewicht  1500 kg 

UniMaster STS, die Platz sparende Lösung mit stehendem Behälter! Serienmäßig mit allen Armaturen, wie Elektromagnetventil oder Druckschalter mit Entlastungsventil für vollautomatischen Betrieb, Motorschutz, Sicherheitsventil, Manometer, Rückschlagventil, Kondenswasser-Ablasshahn und Absperrhahn Keilriemengetriebenes 2-Zylinder-Aggregat mit zweistufiger Verdichtung für 10 bar Druck erhöht die Leistung und sichert einen hohen Wirkungsgrad. Zwischen- und Nachkühler sorgen für eine rasche Abkühlung der erzeugten Druckluft Großes Ventilatorschwungrad für optimale Kühlung Technische Daten: - Druck 10 bar - Ansaugleistung 660 l/min - eff. Liefermenge 520 l/min - Antriebsleistung 4,0 kW - Drehzahl 1025 Upm. - Behältervolumen 270 l - Geräusch 78 db(A) - Abmessungen L=750, B=705, H=1800 mm - Gewicht 170 kg

Geroldinger feeding station with electric heating and cell feeder.

Mobile pumping station w / air driven pump and 2 "camlock couplings and flushing. Build in PE plastic.

Year of construction: 1995-2010 Power: saw motor 5,5KW Square 90° maximum working range: 360 x 360 mm Workspace flat 90° Max: 360 x 360 mm Work area round 90° Max: 360 mm Section length: 10-9999 mm Supply speed to 300 mm / s (Saw) approximate weight: approx. 2500 kg Dimensions Lxwxh (saw) about: 2450mm x3000mm x2050mm LxB floor space: 2450 mm x3000mm The machine is efficiently usable by their equipment and construction methods for a wide range of applications. The machine is both technically and optically after completed retrofit in mint condition. A visit of this saw system is possible at any time. The machine will be overhauled on request in our House. Among others were renewed following points: -Modification on PLC control Siemens S7 -Renewal of the ball screw drive with asynchronous control -New electric components -Renewal of the ...

GUK Cartonac 81 Stand Alone with EK 300 sheed Discharge GUK Folder FA21 / 4 S2 SVA 730 Cartonac 91 with mobile base 3 folding pockets, 2 blind pockets Feed table with sideshift for plano formats max. 215 x 450 mm Min. Format unfolded 90 x130 mm Power 300 FS / min Suspension device for shed discharge EK 300 Control cabinet right, Min. Unfolded format: 60 x 15 mm Optional: Max. Unfolded: 215 x 450 mm Paper weight 50-60gr / m² (single-layer), 37-50gr / m² (multi-layer) Space requirements. 1,20m x 1,40m Power requirement: 2,1KW, 400V 3 Ph, 50 HZ Compressed air requirement: 6 bar / 15l / min (for control switch or optional pneumatic marking device) Stepless mechanical drive for folding machine Pressure-vacuum pump. included Mobile substructure Code reader Argus 4 counter drive motor

Qty. 2 Second-hand billet automatic stacker including packaging unit Mfc.: Mannesmann Demag Sack Each unit consist of: Layer removing device transportation of billet layer within the area of stacking table Qty. 5 Stacking cars Driveway approx.: 600 mm Transporting speed: 0.1 m/sec. Stop device to remove the billet layers in front of the stacking lift table Qty. 5 Stop levers Bearing blocks Tension rods Pneumatic cylinder Stacking device for stacking of transferred layers to the package Stacking table Stroke: 400 mm Package dimensions: 300 ? 600 x 200 ? 400 mm - W x H Package weight: max. 6000 kg