ARMINIUS sp used machines

Manufacturer: Arminius, Type: ST 2, Year: 1991, Control: Hand, Table length: 2000, Work piece hight min-max mm: 10-60, Feeding speed min-max m/min: 5-25, Controllable slewable: yes, Number of sanding units: 2, 1st sanding motor controlled and tiltable: Schleifscheiben Typ Arminius, Power kW: 1,1, 2nd sanding motor controlled and tiltable: Schleifscheiben Typ Arminius, Power kW: 1,1, Power kW: 1,1, Power kW: 1,1, Control panel at bottom: yes, Hight adjustment by hand wheel: yes, Year :1991

Manufacturer: Arminius Topfbohrautomat, Type: ST-10/S, Year: ca.1995, Control: hand, Function: Toploch Bohrautomat, One or two Spot machine: Einplatz, Working range X: 1500, Working range Y-axis: ca.100, Working range Z: 60, Drilling supprt from bottom: yes, Year :ca.1995

Manufacturer: Arminius Leistenfräs und Schleifmaschine 2 Maschine verstellbares Bett, Type: SP 39, Year: 1994, Monting of the machine: 2 X Fräsen/2 X vertikal schleifen/2X horizontalschleifen/Radiusshleifen schwenkbar/2 Radius schleifen oben/unten, Sanding width mm: 120, Sanding hight mm: 120, Sanding belts horizontal/bottom: keine, Sanding belts horizontal/longitudinal: 5, Sanding belts horizontal/traverse: no, Number of sanding belts left: 6, Sanding belts on right, qty.: 6, Bandschleifaggregate Stk.: 10, Bürstenaggregate Stck.: no, Right side units Qty.: linke und rechte Seite sind gleich Bestückt, Unit 1 tiltable: Zerspaner, Unit 2 slewable: rechts und links Profifräse, Aggregat 2 kW: ca. 2,2 , Unit 3 slewable: rechts und links Kantenschleifen Vertikal/nicht schwenkbar, Aggregat 3 kW: 1,5, Unit 4 slewable: rechts und links Kantenschleifen Vertikal/nicht schwenkbar, Aggregat 4 kW ...

Manufacturer: Arminius Fräs und Kantenschleifmaschine, Type: SP 12, Program: yes, Axis control: no, Work piece width min-max mm: 60-500, Min.-max. workpiece height in mm: 10-60, Work piece length min-max mm: 100, Sanding hight mm: 120, Surface sanding units: 1, Profile sanding units: 2, Phase units: 2, Monting of the machine: Fräsen/Schleifen von oben/gerade schleifen/Phase/Phase/Bürste/Bürste, Unit 1 tiltable: yes, Unit 1 Kw: 2,2, Unit 2 slewable: no, Unit 2 Kw: 2,2, Unit 3 slewable: no, Unit 3 Kw: ca.2,0, Unit 4 slewable: yes, Unit 4 Kw: ca 1,0, Unit 5 slewable: yes, Unit 5 Kw: ca. 1,0, Unit 6 slewable: Bürste, Unit 6 Kw: Bürste, Shoes electr. controlled: yes, Constant table hight: yes,

Manufacturer: Arminius Kantenschleifmaschine, Type: SP 33, Year: ca.1993, Monting of the machine: Bürste/längs/längs/radius oben, Sanding belt hight: ca.50, Sanding belt length max mm: 2150 X 50, Work piece hight min-max mm: 8-50, Work piece width min-max mm: 75, Feeding speed min-max m/min: 5-15, Length of the machine mm: ca.4500, 1st sanding motor controlled and tiltable: Bürste, Frequency controlled: regelbar, Power kW: 0,75, 2nd sanding motor controlled and tiltable: yes, Frequency controlled: regelbar, Power kW: 0,75, 3rd sanding motor controlled and tiltable: yes, Frequency controlled: regelbar, Power kW: 0,75, Frequency controlled: regelbar, Power kW: 0,75, Belt clamping pneumatically: yes, Hight adjustment by hand wheel: yes, radius sanding device: oben, Oscillation: yes, Hight adjustment: yes, Year :ca.1993

Swivel angle 135° Motor 1.1 kW Table height 860 mm Table surface 800×1000 mm Spindle dimensions 28 x 90 mm Spindle speed 1500 rpm with feed unit: Felder S/308, YOC 2011 and accessories

Profile edge grinding and milling machine, edge grinding machine, edge grinder, grinding machine -with: copying device -Equipment: 1 grinding head -Power: 1.1 kW -Speed: 500-1500 rpm -Dimensions: 1200/1420/H1520 mm -Weight: 656kg Compact linear milling and grinding machine for any profile on strips and panel edges. Extremely short changeover times to a stationary grinding machine. Corner processing on MDF and solid wood workpieces with different radii (R = 1 to R = 30 mm) and corner angles. Manual creation of corner angles from 25 to 170 degrees. The grinding process for corner processing takes place in one clamping (approx. 10 seconds).

Profile edge grinding and milling machine, edge grinding machine, edge grinder, grinding machine -with copier -2x: milling heads -Power: 1.5 kW -Speed: 3000-6000 rpm -1x: grinding head -Power: 1.1 kW -Speed: 500-1500 rpm -Milling and grinding heads in thickness: adjustable -Max. Workpiece thickness: 40 mm -Max. Corner radius: 40 mm -Dimensions: 1200/1600/H1520 mm -Weight: 782 kg

In the case of spark-affected smoke and vapours, there is a risk of fire development in the filter material of the extraction system. For this reason, we recommend the use of the BOFA Spark Arresort 2 in such an application. This extinguishes the sparks to the required extent and switches off the extraction system at staker temperature development. Height/with signal tower: 665/870 mm Depth: 530 mm Width: 420 mm Capacity: 850m3/h (500 cfm) Weight: 40 kg (88lbs) Power supply: 115 - 230 V VAT is shown Delivery EXW

Model SP17-5 and SP17-4 in stock, data SP17-5: 3 kw, 3x 380-400-415V, useful frequency: 50 hz, 33 kg, product number: 99284892, pressure port connection: RP2 1/2, pump speed 2900 rpm, nominal volume flow: 17 m³ / h, nominal head: 40 m, number of stages 5, maximum medium temperature: 40° C,

Technical data: Make: Moehringer Width: 1600 mm Length: 6000 mm - with pneumatic belt repeller Pictures and further information on request

Krauss Maffei Type: KM 140-700 C3 Sprinter, with IML Robot Control: MC 4 Built: 2000 Closing unit Clamping force t: 140 Holm size mm: 470 x 470 Installation height min/max mm: 300 plate size: 745 x 770 Spraying unit Screw diameter mm: 50 Spray weight gr: 346 Spray volume cm3: 377 spray pressure bar: 1892 Dimensions and weights Dimensions LxWxH m: 4.8 x 1.8 x 2.2 Machine Weight Kg: 6800 Other with IML Robot 2 Cover, Euromap 12

Self-priming eccentric screw pump including 2/3 hose fitting with nut nut MG90/65 sleeve VA and 2/3 hose fitting with groove nut DN65/65 sleeve VA mounted on a chassis. Technical data: Rated power 4 020 / 8 160 l/h Engine power: Level 1 1.0 (1.36) kW (PS) Level 2 1.9 (2.6) kW (PS) Electrical connection 400V 50Hz (3 phases) Electrical protection 16 A Dimensions: Length 1 270 mm Width 500 mm Height 810 mm Weight 57 kg Material 1.4301 / AISI 304 Connections: front MG90 AG top DN65 AG can be used for mash

Self-priming eccentric screw pump including 2/3 hose fitting with nut nut MG90/65 sleeve VA and 2/3 hose fitting with groove nut DN65/65 sleeve VA mounted on a chassis. Technical data: Rated power 9 960 / 19 380 l/h Engine power: Level 1 2.5 (3.4) kW (PS) Level 2 4.2 (5.71) kW (PS) Electrical connection 400V 50Hz (3 phases) Electrical protection 16 A Dimensions: Length 1 270 mm Width 500 mm Height 810 mm Weight 90 kg Material 1.4301 / AISI 304 Connections: front MG90 AG top DN65 AG can be used for mash

New BIG BAG replenishment station with spiral conveyor the devices in stock available for immediate delivery. Spiral conveyor discharge height 2800 mm for 1 qbm big bags. At smaller big bag can be inter's pallets. NET price plus VAT

FRICTION BELT DIRECT FROM THE MANUFACTURER! Description: -Chrome leather friction belt for screw press, riveted, new! -Dimensions: 530 mm i.diameter x 50 mm high x 18 mm thick ON request make we the friction belts regarding to your sizes! For all machine types like SMS Hasenclever Berrenberg, Schuler, Weingarten, Vaccari, via, Mecolpress, Osterwalder... We deliver worldwide!

ESCHER-Spiral Mixer M-240 R-P - exhibition machine, brand-new condition, year of manufacture: 2019- for 150 kg of flour or 240 kg dough, bowl capacity 380 litres, bowl, mixing arm and breaking bar made from stainless steel, bowl locking and bowl drive by a patented cone system, two timers and two speeds, automatic reverse from low to high speed, hydraulic lifting and lowering of the machine head, closed bowl cover made from stainless steel machine includes in total two extra bowls

Used spiral mixer DIOSNA, type: SP 160 D - In repainted the bakery State - 2 time watches - new dust cover - Bowl for 160 kg dough or flour-100 kg - spiral stainless - stainless steel boiler - - 2 speeds - 1 reverse - emergency off switch of the mixer is in good condition and is ready for use immediately. Inspection and testing according to arrangement.

Kneading spiral kneading tool spiral for Kemper spiral kneader Model: SPL 75 stainless steel Ready to go! More kneading spirals on request! ; ready to ship

Self-priming eccentric screw pump including 2/3 hose fitting with nut nut MG90/65 sleeve VA and 2/3 hose fitting with groove nut DN65/65 sleeve VA mounted on a chassis. Technical data: Rated power 840 - 8 100 l/h Engine power 2.2 (3.0) kW (HP) Electrical connection 400V 50Hz (3 phases) Electrical protection 16 A Material 1.4301 / AISI 304 Connections: front MG90 AG top DN65 AG can be used for mash

Sottoriva Sprint 30 spiral mixer serial: B31656 2001, 30L spiral mixer, variable speed, stainless bowl and contact parts, safety guard, with timer

The compact JELLY is suitable for use on a table or on a mobile base, depending on your needs. Almost any type of gel can be used to work with this device. Operation is very simple and the gun trigger is operated without force. Technical data: Design: stainless steel working parts and body, Power supply: electric 220/240V, 1500 W, Control: manual, Operation type: spraying (gun - spray), Capacity: constant - at gel temp. of approx. 90 degrees C, 400cm3/min, Dimensions: 377 x 510 x 430 mm (length x width x height), Accessories: electrically heated flexible hose, length 1.8m; dispensing gun and gun handle.

Technical data: Motor power: 0,75 kW Voltage: 220 V / 50 Hz Machine width: 900 mm Machine height: 1150 mm Machine length: 750 mm Weight: 135 kg Year of construction: 1996; ready for use

Kemper SPL75 Spiral Kneading Machine Spiral, dough crusher and stainless steel boiler incl. dust protection cover 2 clocks, 2 gears, clock for second speed runs with the first watch, so must be adjusted plus the first watch Feed and return of the boiler + pulse button for boiler rotation Machine in bakery condition, must be thoroughly cleaned before use Video about test run and other pictures available

Technical data: Stand height: 2,000 mm Shelf depth: 600 mm Shelf length: 2,550 mm Usable area: 2,450 x 600 mm Consisting of: 2x Shelf stand 2,000 x 600 mm / unassembled 6x Trusses 2,450 mm 3x Insert bottom - 22 mm chipboard / raw Specialist load: 300 kg / at evenly distributed load Further attachment shelves of this variant are available for 155 € / piece incl. VAT ! These shelves are also available in other sizes. Let us create a free offer. Shipping possible on request.