clamping force: 1500 kN injection volume: 141 g/PS screw diameter: 35 mm platen size: 470 x 470 mm Condition: used, Specification: horizontal injection moulding machine, Type: Allrounder 470C 1500-400 GE GOLDEN EDITION Injection unit: - Screw diameter: 35 mm (wear-resistant) - Centring ring diameter: 125 mm - Max. shot weight: 141 g (PS) - Injection pressure: 2,500 bar Closing unit: - Clamping force: 1,500 kN - Max. opening stroke: 750 mm - Mould installation height: min. 250 mm - Mould clamping plates: 470 x 470 mm - Approx. operating hours: 79,000 h (still in use) - Operating voltage: 3x 400 V, 50 Hz - Nominal motor heating current: 75 / 40 A - Total current: 115 A - Total connection: 65 kW - Core pulls: 1x - Hot runner control points: 6x - Temperature control unit interfaces: 6x (20 mA) - Approved for high temperatures ...
Ref. no.: 18643 Manufacturer: ARBURG Year of construction: 2008 Clamping unit Clamping force: 150 ton Opening stroke: 500 mm Distance between tie bars: 470 x 470 mm Mould height min.: 250 mm Opening width: 750 mm Injection unit Screw diameter: 35 mm Injection volume: 154 cm³ Shot weight: 141 g Injection pressure: 2500 bar Measurements and weight Dimensions: 4,6 x 1,6 x 2,1 m Machine weight: 4850 kg Additional information & extras Core pull: 1 pcs Further information: Communication card for ProSeS interface is available (OPC-UA). Robot interface is available (EUROMAP 67). he Golden Edition is a special version of the well-established ALLROUNDER C series, known for its optimized hydraulic performance, stable production process, and high reliability. The machine has a clamping force of 150 tons and is ideally suited for the production of technical plastic parts as well as applications requ ...
An Arburg injection molding machine with integrated rotary table is available. Connected load: 61kW, clamping force: 500kN, opening force: 40kN, opening stroke: 250mm, max. mold installation height: 270mm, platen distance: 520mm, rotary table diameter: 900mm, rotation angle: 180°, max. table load: 240kg, max. injection pressure: 2500bar. Machine dimensions X/Y/Z: approx. 3250mm/2000mm/2600mm, weight: approx. 3200kg, operating hours: 6244h. Documentation available. An on-site inspection is possible.
Ref. no.: 18591 Manufacturer: ARBURG Year of construction: 2005 Clamping unit Clamping force: 160 ton Opening stroke: 450 mm Distance between tie bars: 520 x 520 mm Mould height min.: 250 mm Mould height max.: 550 mm Opening width: 700 mm Platen size (h x v): 695 x 695 mm Injection unit Screw diameter: 45 mm Injection volume: 254 cm³ Shot weight: 232 g Injection pressure: 1580 bar Measurements and weight Machine weight: 7100 kg Dimensions LxWxH part 1: 5,1 x 1,7 x 2,3 m Further information: The ARBURG 520 A series is part of the fully electric ALLROUNDER range and is known for its high precision, energy efficiency, and reliability in injection molding processes. These machines are particularly suitable for the production of technical plastic parts with high quality requirements, as well as for applications where repeatability and process stability are essential. Typical features of this ...
An almost like-new injection moulding machine Arburg is available. Clamping force: 1600kN, tie bar distance: 520mm, clamping stroke: 364mm, ejector stroke: 150mm, ejector force: 40kN, injection unit: 400, injection pressure: 2500bar. Machine dimensions X/Y/Z: approx. 6000mm/1800mm/2200mm, weight: approx. 6000kg, control: Selogica, operating hours: approx. 67h. Includes enclosure with clean air supply FilterFanUnit and removal robot. Documentation available. An on-site inspection is possible.
Manufacturer: ARBURG Year of Manufacture: 2023 Condition : New Model: ALLROUNDER 920 S 5000 Configuration: 1300 / 1300 L (Multi-component L-type) Clamping Force: 5,000 kN Injection Units: - IU 1: EUROMAP 1300 - IU 2: EUROMAP 800 It was test-run only twice during commissioning and has not been in production since. Does not include the robots mounted on the machine Find more here - .ucymachines/ Contact us at - sales@ucymachines
Manufacturer: ARBURG Model: ALLROUNDER 720 S 3200 - 290 / 290 Year of Manufacture: 2023 Condition : New Specifications: - Distance Between Tie Bars: 720 mm - Clamping Force: 3200 kN (max.) - Injection Unit 1 (by EUROMAP): 290 - Injection Unit 2 (by EUROMAP): 290 Does not include the robots mounted on the machine Find more here - .ucymachines/ Contact us at - sales@ucymachines
Manufacturer: Arburg Model: ALLROUNDER 630 S 2500 – 675 Year of Manufacture: 2003 Technical Specifications: - Operating Voltage: 400 V, 3-phase, 50 Hz - Control Voltage: - 230 V AC, 50 Hz - 24 V DC - Motor Heating Rated Current: 113.0 / 33.0 A - Total Rated Current: 146.0 A - Total Connected Load: 83.0 kW - Tie Bar Distance: 630 mm - Clamping Force: 2500 kN - Screw Diameter: 45 mm - Max. Part Weight (PS): 252 g - Core Pull: Yes (1 unit) - Orientation: Horizontal - Number of Components: 1 - Drive Type: Hydraulic - Robot Operating Hours: 110315 (automatic operation) Find more here - .ucymachines/ Contact us at - sales@ucymachines
Manufacturer: Arburg Model: ALLROUNDER 1200T 800 – 150 (Vertical) Year of Manufacture: 2006 Technical Specifications: - Weight: 7400 kg - Clamping Force: 800 kN - Operating Voltage: 400 V / 3 Phase / 50 Hz - Heating Capacity: 9.4 kW - Pump Motor: 1 × 18.5 kW - Total Connected Load: 27.9 kW - Operating Hours: 86249 (automatic operation) - Tie Bar Distance: 1200 mm - Clamping Force: 800 kN - Screw Diameter: 25 mm - Max. Part Weight (PS): 45 g - Core Pull: Yes (1 unit) - Orientation: Vertical - Number of Components: 1 - Drive Type: Hydraulic - Robot There is an issue with the monitor. Monitor board needs replacement. Find more here - .ucymachines/ Contact us at - sales@ucymachines
Manufacturer: ARBURG Model: ALLROUNDER 680 Year of Manufacture: 2016 Type of Machine: Injection Moulding Machine Electrical Specifications: - Operating Voltage: 400 V, 3-phase, 50 Hz - Control Voltage: 230 V ~ / 24 V = - Motor/Heating Rated Current: 76 A / 18 A - Total Rated Current: 94 A - Total Connected Load: 56 kW Machine has already been dismantled Operating hours: à approx. 29,000 hours Find more here - .ucymachines/ Contact us at - sales@ucymachines
clamping force: 1300 kN injection volume: -- cm³ screw diameter: 45 mm platen size: 470 x 470 mm Condition: used, Specification: Horizontal injection moulding machine, Type: Allrounder 470 S 1300-350 Injection unit: - Screw diameter: 45 mm - Centring ring diameter: 125 mm - Shot weight max.: 210 g (PS) - Injection pressure: 1,840 bar Clamping unit: - Clamping force: 1300 kN - Opening stroke max.: 850 mm - Mould installation height: min. 275 mm - Mould mounting platens: 470 x 470 mm - Operating hours approx.: 91,000 - Core pulls: 1x - Valve gate: 1x pneumatic - Hot runner control points: 12x - Temperature control unit interfaces: 6x (20 mA) - Conveyor belt in the machine - Selector unit. available - Release for high temperature up to 450°C - Communication card for ProSeS interface available - Robot interface available. Technical pr ...
clamping force: 350 kN injection volume: 59 cm³ screw diameter: 25 mm platen size: 400 x 400 mm Condition: used, Specification: injection moulding machine for rubber - used International size: 350-90 clamping unit: - clamping force: 350 kN - clamping platen size: 400 x 400 mm - Clear distance between tie bars: 270 x 270 mm - Mould installation height min.: 225 mm - Distance between clamping platens: max. 550 mm - Opening stroke max.: 325 mm - Ejector stroke: 125 mm Injection unit: - Screw diameter: 25 mm x 20D - Injection volume max.: 49 cm³ - Injection part weight: 59 g/hp - Max. injection pressure: 1,860 bar - Screw circumferential speed: 37 m/min - Cylinder heating: 4x 900 W - Nozzle heating: 300 W - Heating complete: 4,6 kW - Pump motor: 11 kW - Total power ...
clamping force: 1.300 kN injection volume: 230 cm³ screw diameter: 45 mm platen size: 685 x 685 mm Condition: used, Specification: injection moulding machine for TPE - used including Koch dosing unit clamping unit: - clamping force: 1.300 kN - heating platen size: 685 x 685 mm - Clear distance between tie bars: 470 x 470 mm - Mould installation height min.: 250 mm - Distance between platens max.: 900 mm - Opening stroke max.: 650 mm - Ejector stroke: 225 mm Injection unit: - Screw diameter: 45 mm x 18D - Injection volume max.: 230 cm³ - Injection part weight: 210 g/hp - Max. injection pressure: 1,670 bar - Screw circumferential speed: 75 m/min - Cylinder heating: 4x 2,200 W - Nozzle heating: 600 W - Connection value: 3x 400 V, 50 Hz - Electrical connection (back-up fuse): 100 A - Weight approx.: 6,3 ...
clamping force: 500 kN injection volume: -- cm³ screw diameter: 25 mm platen size: 400 x 400 mm Condition: used, Specification: horizontal injection molding machine, - used injection unit: - Screw diameter: 25 mm - shot volume max.: -- cm³ - injection pressure approx.: 1290 bar - heating zones: 4 - Heating power: 4 kW clamping unit: - clamping force: 500 kN - opening stroke max.: 325 mm - platen distance max.: 550 mm - clamping platen size approx.: 400 x 400 mm - tie bar distance: 270 x 270 mm - pump motor: 15 kW - total power: 19 kW - operating voltage: 380V, 50Hz - Weight approx.: 1.870 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
clamping force: 700 kN injection volume: 103 cm³ screw diameter: 30 mm platen size: 432 x 310 mm closing stroke: 650 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
