APV puma used machines

Milk pasteurisation line of 25.000 ltr/h with cream separator / skimmer. Temperature cylce: ± 3/4° (in) - regeneration - ± 55 °C (separator) - ± 72/75 °C (pasteurisation) - holding - regeneration - ± 3/4 °C (out). Line existing out of open level tank (2x lid, spraybowl), product pump (APV W 50/50), digital flow transmitter (Yokogawa FLXA402), Transmitter (Rosemount 8712) plate heat exchanger (APV N35 RKS, year: 2004, serial nr 1286, drawing no: NZ032, 4 sections, working pressure 6 bar), cream separator / skimmer (Westfalia MSA200-01-076, year 1980, serial nr 1669 642, self cleaning, bowl, motor (37 kW), motor cover, base plate with feet, water valves (original Westfalia), control panel including original GEA operation panel, all inlet / outlet pipes with pumps, flow indicator and only a few service tools for maintenance, holding tube with slope, booster pump (APV Puma 2-2 1/2) s ...

APV K 55 plate apparatus, 6 departments, Y.O.M.1994, late 2005 dismantled, cleaned, new clip seals and plates UV tested. test log exists. Power approx. 960,000 Kcal/h

Beer pump / water uwemetzler@dingslebener

APV Homogenizer LAB 100 Ball valves Technical data see also pictures: Type: 100-6 TBS Capacity: 100 LTR. / h Engine: 2.2 KW

Homogenizer GAULIN MC 25 - 3TPS, SN.95L34613 Flow Rate: 10,000 l/h, maximum pressure: 170 bar, poppet valves 2-stage with MICRO-GAP valve for dairy products Main motor: 75 kW incl. control cabinet with automatic control Device will be completely overhauled, engine is newly stored,

Homogenizer LAB 12.50H, SN.1-84.195 Flow Rate 100 l/h at max. 600 bar Single-stage homogenizing valve with manual adjustment poppet valves, Main motor 2.2 kW, 400V, 50Hz

Stainless steel centrifugal pump manufactured by APV.

WE HAVE A NUMBER OF SPARE PARTS AND TOOL BOX FOR MC 18 AND MC 30 GAULING HOMOGENISERS

Used pasteuriser by APV model N35. New 2005. Capacity 10246 kg/h. Heat exchange surface 54.6 m². Operating pressure 10 bar. Operating temperature max/min °C 100/0.9.

Used pasteuriser by APV model N35. New 2004. Capacity 10000 l/h. Heat exchange surface 56.35 m². Operating pressure 10 bar. Operating temperature max/min °C 100/0.

Used APV ultrafiltration plant. New 1994. Nominal capacity of 20 000 kg/h. Information on the membranes that were last used in UF3: Burkert T CUT Core UF200-125 075 3659 – 3.6 m x 80 pieces. Each membrane contains 19 filter tubes, i.e. these are AC19 membranes. Tubular core for ultrafiltration Membrane - Material: PES - MWCO: 200 kDa - Tube diameter: 12.3 mm (inside) - Membrane area: 2,7 m² Module - Length: 3,658 mm - Diameter: 75 mm - Head material: Polysulfone -Electrical connection power: 120kW

THE LINE IS FOR SALE ONLY AS A WHOLE PIECE. THE BANK THAT OWNS THE LINE DOESN'T AGREE TO SELL THE MACHINES INDIVIDUALLY! Apple juice and concentrate production line consisting of: 1). 3-stage evaporation station made by APV. The station is equipped with an aroma trap. Max. capacity 12.000 l / h of evaporation on the juice. 2). Ultrafiltration station made by APV, PCI A19 membrane type. New 1996. Previously worked on juice. Capacity 10.000 l / h. Temperature 50 C. Pressure 5.5 Bar. 24 KW motor. 19 membranes dia. 12.5mm 3). Piston press made by Zamet, capacity 5.000 l / h. 2 pieces available. 4). Belt press made by AMOS, model Apex 1600. New 1997.

Milk Homogenizer Capacity 20.000 lt/h Motor: 90 kW 2 stages Hydroulic control

HOMOGENISER Manufacture : APV MANTON GAULIN Model : K3 Capacity : 1200 L/h Bar : 200 bar Stages : 2 Manual Book : Included

APV Screw Compressor 3 Screw compressors Control Panel, Fridge watch 2100 system DX system Last run on 404a Last used to run a Spiral Freezer 33 Kw each, Total = 99Kw Max Model: HS2116 Built 1994 Complete with Searle Condensor (4 fan) Model: MDR 110-12 Serial: 961246 Physical dims: 5.1m x 1.16m x 0.7m (h)

This - APV Concentrate dosing line for UF. Is for dosing of Various products and has multiple dosing pumps with the complying tank for each dosing system, This is all controlled through the control panel with accuracy., Number Dosing systems: 6, Number Tanks: 5 , Steam Heating: With Regulating Valve , PHE: Heating Plate heat exchanger , Product Pumos: 2 , Situated: On stainless steel skid for easy transport , Connections: Exchange plate , CIP: Yes , Electrics: 3 ~ / 400 Vac , Available: Immediately

MANUFACTURER: APV GAULIN MC 45 MILK HOMOGENISER TYPE: 5283 MC45-2,5 TPS CAPACITY: 20.000 l/h PRESSURE: 175 BAR 2 STAGES PRESSURE CONTROL: HYDROULIC CONTROL NUMBER OF PISTONS: 3 MOTOR 90 KW

APV high-pressure homogenizer., Maximum working pressure: 2000 Bar / 29,000 psi / 200 MPa , Nominal flow rate:: 11 litres/h , Minimum sample: 100 ml , Dead volume: 13 ml , ATEX: EEx e II T1%T6 / EE d IIC T1%T6

APV PASTEURIZATION SYSTEM FOR FISH BROTH 1,000 LITRES/HOUR Automatic system designed for the pasteurization of 1,000 litres/hour of strained fish broth for subsequent packaging. Manufacturer: APV Year: 2002 OPERATION DESCRIPTION: - Inlet temperature: 20 °C - Process temperature: 105 °C - Outlet temperature for packaging: 35 °C The whole process consists of different stages that can be programmed using the control panel: 1. Sterilization: carried out by the circulation of hot water at a temperature of 115-120 °C for 30 minutes. 2. Production with water: cooling water flows inside the circuit until the process temperature that will be applied to the product is reached. 3. Production: the unprocessed product is fed into the regulation tank and then the production phase takes place in the circuit. 4. Cleaning-in-place: the installation is cleaned in place by ...

* General * SKU212T477 * LocationBarneveld * CEcheck * Main Features * MaterialStainless steel * Volume300000 Ltr. * Motor30 KW * Specified Features - Centrifugal Pump * Pumpcheck * Number of pumps:1 * Capacity300 m3/h * With motor30 kW 380/415 Volt (ABB)(Ex) * Inletdia. 150 mm * Outletdia. 100 mm * With jacketcheck * Centrifugal Pumps * MaterialStainless steel 1.4408 * General * MakeAPV * TypeW-25/200-380 * Mach.No.92214540915360000 * Floorspace1x0,7 m * Total height0,6 m * Weight390 kg * ATEX designedcheckOils & fatPaints & coatingsCentrifugal PumpsFine chemicalsOther chemicalBiotechnologyRubberAgrochemicalsPlastic & polymersCatalysts & fillersSolventsDetergent & surf.CosmeticsLubricants & oleoDairyBeveragesDyes & pigmentsAPIMinerals & inorganicAPV RosistaIndustries > Food & Feed > Oils & fatIndustries > Chemical > Paints & coatingsPumps > Centrifugal PumpsIndustries > Chemical > Fine  ...

* General * SKU212T487 * LocationBarneveld * MakeAPV * Main Features * MaterialStainless steel * Volume300000 Ltr. * Motor30 KW * Specified Features - Centrifugal Pump * Pumpcheck * Number of pumps:1 * Capacity300 m3/h * With motor30 kW 380/415 Volt (ABB)(Ex) * Inletdia. 150 mm * Outletdia. 100 mm * With jacketcheck * Centrifugal Pumps * MaterialStainless steel * General * TypeWA-35/55-380 * Mach.No.92214540915360000 * Year of construction1997 * Floorspace1x0,7 m * Total height0,6 m * Weight390 kg * ATEX designedcheckOils & fatPaints & coatingsCentrifugal PumpsFine chemicalsOther chemicalBiotechnologyRubberAgrochemicalsPlastic & polymersCatalysts & fillersSolventsDetergent & surf.CosmeticsLubricants & oleoDairyBeveragesDyes & pigmentsAPIMinerals & inorganicAPV RosistaIndustries > Food & Feed > Oils & fatIndustries > Chemical > Paints & coatingsPumps > Centrifugal PumpsIndustries > Chemic ...

* General * SKU212T484 * LocationBarneveld * Main Features * MaterialStainless steel * Volume300000 Ltr. * Motor30 KW * Specified Features - Centrifugal Pump * Pumpcheck * Number of pumps:1 * Capacity300 m³/h * With motor30 kW 400-690 Volt (ATB Motortechnik)(Ex) * Inletdia. 150 mm * Outletdia. 100 mm * With jacketcheck * Centrifugal Pumps * MaterialStainless steel 1.4408 * General * MakeAPV * TypeW-25/200-380 * Mach.No.92214540915360000 * Floorspace1x0,7 m * Total height0,6 m * Weight390 kg * ATEX designedcheckOils & fatPaints & coatingsCentrifugal PumpsFine chemicalsOther chemicalBiotechnologyRubberAgrochemicalsPlastic & polymersCatalysts & fillersSolventsDetergent & surf.CosmeticsLubricants & oleoDairyBeveragesDyes & pigmentsAPIMinerals & inorganicAPV RosistaIndustries > Food & Feed > Oils & fatIndustries > Chemical > Paints & coatingsPumps > Centrifugal PumpsIndustries > Chemical > F ...

Stock# U2473-1 Used system for inline mixing powder with liquid. System consist of: - conical stainless steel AISI 321 feeding hopper with total volume about 4000 l, and working volume about 3800 l. Tank has top side wall feeding inlet with dimensions L 700 mm x H 350 mm, equipped with stainless steel lid closed on clamps. Tank has on conical side wall mounted vibrating device. Includes working platform with stairs. - inline liquid-powder mixer. Powder inlet connection 3". Mixing chamber has internal diameter 180 mm. Rotor is driven directly by el. motor 6.8 kW, 1455 rpm, 400/690 V, 50 Hz, in Ex design (Ex-IIC Exe IIC T3G6). Mounted on mobile stainless steel frame. - Stainless steel bag type dust filter by WAM in Ex design - Connection stainless steel pipes and valves.

REF-2705 APV GAULIN 15-3.0 B HOMOGENIZER 1000 LITRES/HOUR Manufacturer: APV Brand: Gaulin Model: 15-3.0 B Serial no.: 1-02.452 Year: 2002 Single-stage homogenizer for liquids Overall dimensions (mm): 1,400 x 900 x 1,600 (LxWxH) Capacity: 1,000 l/h Max. temperature: 50 °C Homogenization pressure: 200 bar Electric motor: 11 kW/3x380 V/50 Hz Inlet/outlet connections: 50/65 mm Made of stainless steel, including some AISI 316 components N.B.: This homogenizer can be purchased separately or as part of an APV complete pasteurization system for fish broth also advertised on this site.

Pasteuriser and Operating Panel Manufactured by APV Consisting of APV heat exchanger, holding tubes, pump and control panel with chart disc recording Output 200 BBL/320HL Complete with: 30BBL/49HL sterile beer tank Side entry manway Insulated and clad in stainless steel 2BBL/300 litre sterilising tank This is a SECOND HAND item and is sold as seen For more information and more available stock please visit us at - advancedbrewing.co.uk