used AMADA vipros

AMADA VIPROS 358 KING punching machine was manufactured in Japan in 1999. The machine is designed for precise punching of holes in workpieces having a maximum length of 1250 mm, 3000 mm width and 50 kg weight, made of mild steel, stainless steel or aluminium. Low noise level and protection of the sheet metal surface from scratches and scrapes caused by the punching process are guaranteed by a machine brush table equipped with two hydraulic clamps to hold the workpiece during the machining process. The punching machine is able to perform up to 1200 punches per minute with a press force of 30 tonnes. The machine is equipped with a FANUC AC Servo X and Y axis drive, 58 tool stations (including four auto index stations) and a control panel with a installed FANUC Series 18-P CNC controller for full control of the punching machine operation. The AMADA VIPROS 358K punching machine has been r ...

The manufacturing company sells its punching machine Amada Vipros 255 (year 2000). The machine is in good working order, connected. Served according to the regulations. He worked on metal in the range of 0.5-1.2mm. Sold without tools and without stations. I can provide a video or come in person for viewing. Press capacity ... 20 tons (196 kN); Press type ... Servo controlled hydraulic; Axis travel ... 1270 mm x 1270 mm; Max. sheet size ... 1270 mm x 2540 mm (with auto-positioning); Maximum material thickness ... 6.35 mm structural steel; Maximum material weight ... 105 kg; Maximum material weight (maximum speed) ... 62 kg; Maximum hole diameter ... 88.9 mm; Number of stations ... 31 Station: 19 x 12.7 mm; 6 x 31.7 mm; 1 x 50.8mm; 2 x 88.9 mm; Auto Index 2 x 31.7mm; 1 x 50.8mm; Axis speed ... 82 m / min; Impacts per minute (step 2 mm) ... 1000 hp / 2.5 mm (Vipros Tool);  ...

AMADA VIPROS 255 (2001) punching machine Ready for transportation and installation Maintenance and disassembly carried out by AMADA technical service Hours: 31,000 Capacity: 200KN Travel method: X and Y axes move the sheet, C axis for Auto-Index, T axis for the turret Control method: X, Y,T & C simultaneously, 4 axes control Driving Motors: FANUC AC Servo (X,Y,T,C,) Maximum sheet size: 1270 mm (Y) x 1270 (X) mm With 1 reset: 1270 mm (Y) x 2540 mm (X) Maximum axle travel: 1270 mm (Y) x 1270 mm (X) Maximum axes speed: X + Y = 82 m/min Punching precision: +/- 0.07 mm Repeatability: +/- 0.03mm Turret rotation 30 rpm: Bi-directional Number of stations: 31 Auto-Index Number: 3 Maximum hole diameter: 88.9 mm Blows per minute: 1000 1mm steps. 520 8mm pitch. 340 25mm pitch. Maximum punching thickness: 6 mm. (9 mm. with special jaws) Maximum sheet weight: 110 Kgs.

Punching and nibbling press AMADA Vipros 368K Year of manuf. / Built in 2005 Turret / Revolver 58 stations (4 index) CNC Fanuc Punching force / print: 30 ton Working range / working range 1500mm x 2000mm+reposition Brush tables / Bürstentische Still in use, ready for operation / in use, ready for use.

Used Amada Vipros 255 CNC punching machine Year 1998 Complete with Lki 250 load unloader Machine still in production Well maintained

LKI300 loading / unloading system - Control type: FANUC 04PC - Number of turret stations (pcs): 45 - Number of index tool stations, max: 4 - Punching force: 300 kN - Working area max: 2.500 (5.000) x 1.250 mm - Material thickness (punching) max: 6 mm - Dimensions (long x wide x high): 4.673 x 4.120 x 2.450 mm - Weight: 13.500 kg

Set of tools included - Operating hours: 40.000 - Number of turret stations (pcs): 31 - Simultaneous positioning speed (X / Y): 89 m/min - Number of index tool stations, max: 3 - Tool rotation, max: 35 r/min - Control type: Fanuc 18P - Power supply: 25 kVA - Punch diameter max: 88,9 mm - Max. workpiece weight: 100 kg - Working area max: 2.540 x 1.270 mm - Punching force: 200 kN - Material thickness max: 6,4 mm - Compressed air consumption max: 4,16 l/s - Dimensions (long x wide x high): 5.030 x 2.630 x 2.160 mm - Weight: 9.200 kg

BRAND: AMADA YEAR: 1997 MODEL: Vipros 358 Queen APPLICATION TYPE: PUNCHING LOCATION: SPAIN MACHINE TYPE: PUNCHING MACHINE AVAILABILITY: IMMEDIATELY Technical Information GENERAL DATA MEASUREMENTS WIDTH: 4700 MM MEASUREMENTS DEPTH: 4200 MM MEASUREMENTS HEIGHT: 2310 MM MACHINE WEIGHT: 13500 KG CONTROL UNIT BRAND: FANUCMODEL: 04PC MAIN DRIVE PUNCHING FORCE: 300 KN MAXIMUM SHEET THICKNESS: 4 MM MOVEMENT X-AXIS MOVEMENT: 2000 MM Y-AXIS MOVEMENT: 1270 MM WORKPIECE WORKPIECE DRM: 114.3 MM WORKPIECE WEIGHT: 150 KG MAX MATERIAL THICKNESS STEEL: 4 MM STAINLESS STEEL: 4 MM ALUMINUM: 4 MM MEDIA MAIN ELECTRONIC CONNECTION: 400 V POWER CONSUMPTION: 30 KVA CHIP CONVEYOR: YES INTERNAL COOLING: YES

Punching capacity: 300kN, max. sheet dimensions: 1270x3660x6,4mm, max. table load: 100kg, connected load: 35kVA, length: 3778mm, width: 4601mm, height: 2245mm, weight: 13.5t.

Equipment for stamping sheet material produced by Amada is on sale. Machine Vipros 358 King was produced in 1999 in Japan, force 30 t, revolver 58 stations with 4 auto index, brush table type, processing area 1270x4000 mm, maximum sheet thickness 3.2 mm. The equipment was serviced by an official AMADA dealer. The machine is equipped with basic tools and software AMADA and METALIX.

Capacity 30 tons (294kN) X axis 2000mm / Y axis 1270mm Maximum sheet thickness 6.35mm normal steel Maximum plate 1525 x 4000mm 45 stations: 24 x A (Max. Dia. 12.7mm) 12 x W (Max. Dia. 31.7mm) 2 x C (Max. Dia. 50.8mm) 1 x D (Max. Dia. 88.9mm) 2 x E (Max. Dia. 114.3mm) Auto Indexing: 2 x W (Max Dia 31.7mm) 2 x C (Max. Dia. 50.8mm)

BREAKING FORCE: 196 KN MAX SHEET THICKNESS: 3 MM X-AXIS MOVEMENT: 2500 MM Y AXIS MOVEMENT: 1270 MM NUMBER OF INDICATORS: 2 NUMBER OF POSITIONS: 31 STEEL: 3 MM STAINLESS STEEL: 2 MM ALUMINUM: 2 MM MAIN ELECTRICAL CONNECTION: 400V USED POWER: 24 KVA WIDTH MEASUREMENTS: 5330 MM DEPTH MEASUREMENTS: 5123 MM HEIGHT MEASUREMENTS: 2160 WEIGHT OF THE MACHINE: 11000 KG A copy of the software.

Punching machine in good condition. Model: VIPROS 2510K Manufactured: in Japan in 1998 Serial number: 25100014 Punching force: 196 kN Capacities: 1250 x 2500 1250x5000 3-station turret Number of tools: 31 Weight: 11000 kg 3 security cells Liquid cooling If you have any questions, please do not hesitate to contact us. The punching machine is still powered on and can be tested if necessary.

Manufacturer:AMADA Feed speed continuous 0 - 31 m/min Without grinding belt !!!!; Without grinding belt fuehrung

Press brake AMADA HFE 220-3 Number of controlled axes / CNC controlled axis: 7 Condition good, ready to use, visit under electricity possible / Condition: good, in use, can be seen under power in Poland Pressure / Pressure: 2200 kN / 220 ton Bending length / working range: 3100 mm Distance between stands / distance between columns: 2700 mm Stroke / stroke: 200 mm Delivery speed / downwards speed: 1-100 mm/s Working speed / working speed: 1-10 mm/s Retraction speed / backwards speed: 1-100 mm/s Dimensions Machine / Machine's dimensions: 4.3 x 2.3 x 3.1 m Weight / Weight: 14 ton Machine has: new safety cards from Pilz, new tool clips, new keyboard of control, new stop finger Machine has: new safety cards by Pilz, new tool clamps, new CNC cover, new back gauge fingers

Blade length 205 mm Max cutting performance Sheet R = 42 kg / mm2 4 mm Sheet R = 70 kg / mm2 3 mm Engine power 3 kW Number of beats / minutes 50 min Table dimension 625 x 954 mm Capacity of the oil tank 25 l Weight 500 kg The setting between the blades is fully automatic. Standard: - 1 set of knives at 30 ° (mounted on the machine) - 1 stop switch - 1 general circuit breaker - 1 stop adjustable and adjustable every 15° - Fill the first oil - Manual with installation and maintenance instructions and service keys.

For sale we offer an Amada EML 3610NT punch-laser combination machine. The offered machine is used and has 4657Bh. technical data: combined laser/turret punching press EML Z-3610 NT, Y.O.M. 11/2014, 45 tool stations, laser power 4 kW, operating hours: laser/resonator hours: 4657h, control type: AMNC-F, with resonator unit Amada/Fanuc AF 4000i-C, fabrication no. L14x40295, refrigeration & refrigeration unit, flue gas and laser dust filter system Herding MP2 -) right-sided automatic plate magazine LKI AS III MP, Y.O.M. 2015, machine weight approx. 12,000 kg -) left-sided vacuum acceptance & stacking device / single sorting PR 3 300 L 2P, Y.O.M. 2013, power consumption 8.5 kW, weight approx. 4,800 kg Basic installation approx. 20 x 10 m, total H (magazine) approx. 6 m The price is only valid for the machine, without dismantling, transport and commissioning. If you have any  ...

Rated force 2200 Kn Max bending length 3340 mm Table length 3220 mm Table width 180 mm Table height 960 mm Passage between press bar 450 mm Stroke 180 mm Extension 410 mm Distance between stands 2700 mm Max Print 292 Bar Number of cylinders 2 pieces Oil capacity 190 litres Engine power 15 kW Max delivery speed 100 mm/s Working speed 1 - 7.5 mm/s Stroke speed 1 - 75 mm/s Total height with NC 2990 mm Total length with NC 3750 mm Total width with NC 2200 mm and light curtain 250 mm Total weight with NC 12500 kg Amada bending system Length 3750 mm Depth 2200 mm Height 2940 mm

Servoelectric punching machine AMADA EMK 3610 NT Punching force 300 kN Working range: 2500 (up to 5000 mm) x 1525 mm AMNC F Control Max sheet thickness 4.5 mm Revolver with 58 stations: 24 x A (max diameter 12.7 mm) 24 x W (max. 31.7 mm) 4 x C (max diameter 50.8 mm) 2 x D (max. 88.9 mm) Automatic indexing: 2 x W (max diameter 31.7 mm) 2 x E (max. diameter 50.8 mm) Machine dimensions LxWxH: 5430 mm x 5120 mm x 2320 mm Machine weight 24500 kg

The turret press AMADA EUROPE 245 was produced in 2000 (machine installation: 2001). The price of the machine includes: installation and training in the use of the machine Punching machine technical data: - CNC control: FANUC 18 i-P - working time: 35,000 h - pressure: 20 t - work table: X = 600, Y = 400 - maximum punching format without intercept and with 31 stations head: 1020 x 1290 (Y-10; Y1010 T2XX; Y-50; Y970 T3XX) - maximum size of a punched sheet with an intercept: 1020 x 2540 mm - maximum size of the sheet to be punched with the intercept + 1 revolution (optional): 1500 x 2540 mm - maximum sheet thickness on the ball table: 6 mm - maximum sheet thickness on the brush table: 3 mm - maximum allowable weight on the table: 100 kg - punching accuracy: + -0.1 mm - positioning accuracy: + -0.07 mm - number of pneumatic clamps / grips: 2 - number of axes controlled s ...

Punching and nibbling machine / punching press AMADA AE 2510 NT Year of construction / year of manuf. 2011 CNC AMNC Working range 1270mm x 2500mm (max 5000mm with resetting / with reposition) Revolver: 51 stations incl. 4 rotatable / index Max tool diameter / max tool diameter 88.9mm Brush tables / brush tables Servoelectric drive / servoelectric drives Max 900 hits per minute

Capacity: 100 t Folding length: 3100 mm CNC Brand: Amada CNC Model: Operateur Max. bending length:        3.100mm Distance between column:    2.700mm Max. pressing force:        100T Dis. Beam – Table:          450mm Beam stroke:                180mm Approch speed:              8mm Working speed:              100mm Return speed:               80mm Adjustment X-Axis back gauge:750mm Number of controlled axis:  4 Control:                    Opperateur  Length:                     3.700 mm  Width:            ...

Punching machine AMADA Europe 258 Punching force / Punching force 20 ton Working range / working range: 1250mm x 2000mm (4000mm with one reposition. 5000mm or more is also possible with second reposition) Hydraulic-eccentric drive / Hydraulischer Antrieb Turret / Revolver; Total number of 27 stations: Auto Indexing: 2 x B (max dia 31.7mm) 1 x C (max. dia. 50.8mm) Roller table / ball table

Height under guides: 90 mm Throat: 0 mm Table length: 400 mm Table width: 400 mm Make  Amada HA 4 Type HA 400 Year 1982 Bandsaw automat Capacity round max. diam.Cap = 400 x 400 Angle degrees max.Speed = 15 - 90M Type machine: Vert./Hor.Power 5.5 kW Workpiece height (mm) Chip conveyor Workpiece width (mm)Load = 2500 kg Capacity rectangle (mm) 90 Gr. Cutting Capacity square (mm)Bundel clamp* Managing the cycle of automatic travel included various lengths in the same quantity cycle * Control of pressure and cutting speed * Pressure regulation of vice clamping * Screw chip conveyor * Coolant system  

Press brake: Amada HFE 170-3 Year of construction / Year: 2000 CNC 8 axis: 2Y + 2X + 2Z + 2R Pressure / Pressure: 170 ton Bending length : 3000 mm Stroke / stroke max. 200mm Weight / weight: 11.6 ton