AMADA hfe used machines

This 8-axis AMADA HFE M2 5020 was manufactured in 2011. It features a hydraulic press brake with a maximum press force of 500 kN and a stroke up to 200 mm. Weighing 4,700 kg and operating at a noise level of 74 dB(A), its CE certified and made in France. If you are looking to get high quality bending capabilities consider the AMADA HFE M2 5020 machine we have for sale. Contact us for more information.

Producent: AMADA Model: HFE M2 2204 8 AXESL Rok produkcji: 2016 Numer seryjny: HFE-M2-220.4 LK101025 Liczba osi: 7 (konfiguracja 8 AXESL) Siła nacisku: 2,200 kN Długość: 4,000 mm System bezpieczeństwa: AKAS III P (laserowy) Pomiar kąta gięcia: cyfrowy czujnik kąta Skok: "Long Stroke" (wydłużony) Moc przyłączeniowa: 20 kW Przepracowane godziny: 10.238 h Wymiary i masa: Waga: 17,970 kg Wymiary (szer. x wys. x gł.): ok. 550 x 300 x 200 cm Wyposażenie dodatkowe: DUŻA ILOŚĆ NARZĘDZI!

Amada HFE 80-25 Year: 11/ 1999 Working length: 2550 mm Stand width: 2125 mm Pressing force: 80 tons CNC control: AMADA OPERATOR II graphic Controlled axes: Y1/Y2; X1/X2; R1/R2; Z1/Z2 mot. adjustable back gauge Stroke: 200 mm Projection: 420 mm Crowning Working height: 960 mm Engine power: 9 kW CE mark Dimensions (length x width x height): approx. 3000 x 2250 x 2250 mm Weight: approx. 6 tons

Press brake AMADA HFE 220-3 Number of controlled axes / CNC controlled axis: 7 Condition good, ready to use, visit under electricity possible / Condition: good, in use, can be seen under power in Poland Pressure / Pressure: 2200 kN / 220 ton Bending length / working range: 3100 mm Distance between stands / distance between columns: 2700 mm Stroke / stroke: 200 mm Delivery speed / downwards speed: 1-100 mm/s Working speed / working speed: 1-10 mm/s Retraction speed / backwards speed: 1-100 mm/s Dimensions Machine / Machine's dimensions: 4.3 x 2.3 x 3.1 m Weight / Weight: 14 ton Machine has: new safety cards from Pilz, new tool clips, new keyboard of control, new stop finger Machine has: new safety cards by Pilz, new tool clamps, new CNC cover, new back gauge fingers

Press brake: Amada HFE 170-3 Year of construction / Year: 2000 CNC 8 axis: 2Y + 2X + 2Z + 2R Pressure / Pressure: 170 ton Bending length : 3000 mm Stroke / stroke max. 200mm Weight / weight: 11.6 ton

220 ton x 4000mm

100 ton x 3000mm 3i Graphic control 8 Axis With tooling

100 ton x 3000mm with ANTIL Robot

Key data: 130 t, 3100 mm

3000 x 130 ton - Extra Long Stroke 600mm! 8 Axis With tooling / DigiPro angle measurement

Key data: 220 t, 4000 mm

220 ton x 4000mm / 8 Axis CNC

pressure: 50.0 t chamfer lenght: 2090 mm distance between columns: 1665 mm column arm: 400 mm table width: 60.0 mm ajustment speed: 100 mm/sec working feed: 10.0 mm/sec return speed: 92.0 mm/sec stroke: 200 mm table height: 910 mm dayligth: 470 mm Number of working hours: 36.160 h total power requirement: 6.0 KW weight of the machine ca.: 4850 kg range L-W-H: 3458 x 2450 x 2450 mm ** with only approximately 36.160 operating hours (!!) - Inspected condition - Machine video - https://www.youtube.com/watch?v=x8Z0h2_wA6s Equipment: - CNC electro-hydraulic press brake - CNC control type OPERATEUR 2 with 8 axes (X1+X2, Y1+Y2, R1+R2, Z1+Z2) * CNC-controlled backgauge adjustment (X-axis) * CNC-controlled vertical adjustment of the stop fingers (R1+R2) * CNC-controlled left-right adjustment of the stop fingers (Z1+Z2) * Hand control unit for manual axes movement * Pivoting control, front left - A ...

pressure: 170 t chamfer lenght: 3170 mm distance between columns: 2700 mm column arm: 420 mm dayligth: 470 mm stroke: 200 mm ajustment speed: 100 mm/sec working feed: 10.0 mm/sec return speed: 100 mm/sec table width: 180 mm table height: 960 mm oil volume: 235 L 0: 300 bar controlled axis: 6 Anzahl Number of working hours: 29.400 h total power requirement: 16.5 KW weight of the machine ca.: 11910 kg range L-W-H: 4025 x 2020 x 2900 mm ** well-maintained condition (!!) ** with only approx. 29.400 operating hours - in checked condition - machine video - https://www.youtube.com/watch?v=APP0HZjMms4 Equipment: - electro-hydraulic CNC press brake - AMADA CNC control OPERATEUR 2 - 6 axes (X, Y1 + Y2, R, Z1 + Z2) * swiveling operation - front left * tool & program library - CNC-controlled back stop adjustment (X-axis) * adjustment range .. 700 mm - CNC-controlled vertical adjustment of the stop f ...

- Long stroke CNC Press brake - 8 Axis controlled - ASTRO 50Y AMADA Robot - ASTRO 50 Y bending cell is composed of an HFE Pressbrake associated with an 7-axis robot. - When machining medium / fine thick and large dimension parts. - Machine turns out to be highly polyvalent thanks to a 4-m long linearaxis and numerous grippers. - Programming has become particularly easy through EASY CAM software - Safety CE Fence around machine and tobot

A CNC sheet bending machine Amada is available. Working width: 4000mm, pressing force: 2200kN, stroke: 350mm, axes: 8. Machine dimensions X/Y/Z: approx. 5600mm/2650mm/3300mm, weight: approx. 18000kg, control: Amada. An on-site inspection is possible.

pressure: 80.0 t chamfer lenght: 2570 mm distance between columns: 2125 mm column arm: 420 mm table width: 60.0 mm ajustment speed: 100 mm/sec working feed: 10.0 mm/sec return speed: 100 mm/sec stroke: 200 mm dayligth: 470 mm table height: 960 mm Number of working hours: ~ 33.100 h oil volume: 90.0 l total power requirement: 9.0 KW weight of the machine ca.: 5750 kg. range L-W-H: 3630 x 2450 x 2550 mm Equipment: - AMADA CNC control, model OPERATEUR II * Manual control for fine adjustment of the axes - CNC control OPERATEUR 2 in 8 axes (X1 X2,Y1 Y2,R1 R2,Z1 Z2) - CNC-controlled backgauge adjustment (X1 X2) - CNC-controlled vertical adjustment of the fence fingers (R1 R2) - CNC-controlled adjustment of the stop fingers left-right (Z1 Z2) - Swivel operation, front left - 1x freely movable foot switch - Top tool holder with top wedge crowning (AMADA system) - Rear safety guard (safety grid)  ...

pressure: 70 -800 kN chamfer lenght: 2505 mm distance between columns: 2125 mm Control: OP 2000 controlled axis: 7 throat: 420 mm stroke: 200 mm dayligth: 470 mm Number of working hours: h table width: 60 mm table height: 960 mm ajustment speed: 100 mm/sec working feed: 10 mm/sec return speed: 100 mm/sec weight of the machine ca.: 6,3 t Patented Amada technology ensures absolutely correct bending results without bombing device The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Rated force 2200 Kn Max bending length 3340 mm Table length 3220 mm Table width 180 mm Table height 960 mm Passage between press bar 450 mm Stroke 180 mm Extension 410 mm Distance between stands 2700 mm Max Print 292 Bar Number of cylinders 2 pieces Oil capacity 190 litres Engine power 15 kW Max delivery speed 100 mm/s Working speed 1 - 7.5 mm/s Stroke speed 1 - 75 mm/s Total height with NC 2990 mm Total length with NC 3750 mm Total width with NC 2200 mm and light curtain 250 mm Total weight with NC 12500 kg Amada bending system Length 3750 mm Depth 2200 mm Height 2940 mm

The turret press AMADA EUROPE 245 was produced in 2000 (machine installation: 2001). The price of the machine includes: installation and training in the use of the machine Punching machine technical data: - CNC control: FANUC 18 i-P - working time: 35,000 h - pressure: 20 t - work table: X = 600, Y = 400 - maximum punching format without intercept and with 31 stations head: 1020 x 1290 (Y-10; Y1010 T2XX; Y-50; Y970 T3XX) - maximum size of a punched sheet with an intercept: 1020 x 2540 mm - maximum size of the sheet to be punched with the intercept + 1 revolution (optional): 1500 x 2540 mm - maximum sheet thickness on the ball table: 6 mm - maximum sheet thickness on the brush table: 3 mm - maximum allowable weight on the table: 100 kg - punching accuracy: + -0.1 mm - positioning accuracy: + -0.07 mm - number of pneumatic clamps / grips: 2 - number of axes controlled s ...

Manufacturer:AMADA Feed speed continuous 0 - 31 m/min Without grinding belt !!!!; Without grinding belt fuehrung

Blade length 205 mm Max cutting performance Sheet R = 42 kg / mm2 4 mm Sheet R = 70 kg / mm2 3 mm Engine power 3 kW Number of beats / minutes 50 min Table dimension 625 x 954 mm Capacity of the oil tank 25 l Weight 500 kg The setting between the blades is fully automatic. Standard: - 1 set of knives at 30 ° (mounted on the machine) - 1 stop switch - 1 general circuit breaker - 1 stop adjustable and adjustable every 15° - Fill the first oil - Manual with installation and maintenance instructions and service keys.

Servoelectric punching machine AMADA EMK 3610 NT Punching force 300 kN Working range: 2500 (up to 5000 mm) x 1525 mm AMNC F Control Max sheet thickness 4.5 mm Revolver with 58 stations: 24 x A (max diameter 12.7 mm) 24 x W (max. 31.7 mm) 4 x C (max diameter 50.8 mm) 2 x D (max. 88.9 mm) Automatic indexing: 2 x W (max diameter 31.7 mm) 2 x E (max. diameter 50.8 mm) Machine dimensions LxWxH: 5430 mm x 5120 mm x 2320 mm Machine weight 24500 kg

For sale we offer an Amada EML 3610NT punch-laser combination machine. The offered machine is used and has 4657Bh. technical data: combined laser/turret punching press EML Z-3610 NT, Y.O.M. 11/2014, 45 tool stations, laser power 4 kW, operating hours: laser/resonator hours: 4657h, control type: AMNC-F, with resonator unit Amada/Fanuc AF 4000i-C, fabrication no. L14x40295, refrigeration & refrigeration unit, flue gas and laser dust filter system Herding MP2 -) right-sided automatic plate magazine LKI AS III MP, Y.O.M. 2015, machine weight approx. 12,000 kg -) left-sided vacuum acceptance & stacking device / single sorting PR 3 300 L 2P, Y.O.M. 2013, power consumption 8.5 kW, weight approx. 4,800 kg Basic installation approx. 20 x 10 m, total H (magazine) approx. 6 m The price is only valid for the machine, without dismantling, transport and commissioning. If you have any  ...

Punching and nibbling machine / punching press AMADA AE 2510 NT Year of construction / year of manuf. 2011 CNC AMNC Working range 1270mm x 2500mm (max 5000mm with resetting / with reposition) Revolver: 51 stations incl. 4 rotatable / index Max tool diameter / max tool diameter 88.9mm Brush tables / brush tables Servoelectric drive / servoelectric drives Max 900 hits per minute

Punching machine AMADA Europe 258 Punching force / Punching force 20 ton Working range / working range: 1250mm x 2000mm (4000mm with one reposition. 5000mm or more is also possible with second reposition) Hydraulic-eccentric drive / Hydraulischer Antrieb Turret / Revolver; Total number of 27 stations: Auto Indexing: 2 x B (max dia 31.7mm) 1 x C (max. dia. 50.8mm) Roller table / ball table

3000 x 1500mm 4000w