We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
used
- Double hoist 60 + 60 Ton - Lifting class H2 - Freqence vario speeds - Hoist ABUS GM 7600U6 - FEM Group 1Am - Ikusi remote (TM70 2.13) - Little used / Under power / Direct availebel
used
Load capacity: 2500kg, span: 18,600mm, weight including trolley: 3090kg, operating mode: floor control via push-button pendant, control system: electric, number of crane travel wheels: 4, wheel diameter: 160mm, micro-speed crane travel: 10m/min, crane travel speed: 40m/min, protection class: IP55, brake: disc brake, with crane limit switch, with documentation. An on-site inspection is possible.
used
Electric chain hoist, crane, overhead crane, assembly crane, manual trolley, trolley, trolley drive, crane drive, crane travel, trolley -Manufacturer: Abus, electric chain hoist with driven chassis -Chain hoist: Abus type GM3- Load capacity 1000 kg -Main stroke: 5 m/min -Fine stroke: 1.3 m/min -Chain length: 3.5 m -Electric chassis: Abus S11148 34/153 rpm -Beam width: max. 310 mm Dimensions: see photo and technical drawing -Electrical accessories: Connection cable (see photos) -Transport dimensions: 450/780/H400 mm -Weight: 56 kg
used
Crane remote control, radio receiver, receiver, crane radio remote control, radio control system, crane control, radio remote control, radio remote control, radio remote control, radio transmitter -Manufacturer: ABUS, radio remote control with transmitter and receiver for crane remote control -Type: ABURemote AR611 -Scope of delivery: as shown in the pictures, plug/connection cable (without remote control). -Dimensions: 570/510/H180 mm -Weight: 5.5 kg
used
Offered is a column-mounted jib crane: Load capacity: 1000kg, Outreach: 3500mm, Overall height: 4400mm, Column diameter: 355mm, Crane classification: H2 / B3, Hoist unit: electric chain hoist, Slewing gear: electric 0.21rpm / 0.84rpm, System regularly inspected, Inspection by appointment
used
Electric chain hoist, crane, indoor crane, assembly crane, hand trolley, push trolley, crane trolley, trolley drive, crane drive, crane undercarriage, trolley -Manufacturer: Abus, electric chain hoist with powered chassis -Chain hoist: Abus type GM4- load capacity 1000 kg -Main stroke: 5 m/min -Fine stroke: 1.3 m/min -Chain length: 3.3 m -Electric chassis: Abus EF14 -Carrier width: max. 340 mm -Dimensions: see photo technical drawing -Electrical accessories: connection cable see photos -Transport dimensions: 900/700/H340 mm -Weight: 63 kg
used
Geared motor, electric motor, three-phase motor, electric geared motor -Power: 0.1/0.75 kW -Speed: 12/53 rpm -Voltage: 380 V -Design: B3 -Shaft: Ø 39/50 mm/Ø 35/80 mm -Protection class: IP54/55 -Brake: 1.8 Nm -Quantity: 1 piece -Dimensions: 760/220/H265 mm -Weight: 51 kg
used
Suspension clamp, clamp sleeve, sliding gate sleeve, cable clamp, cable trolley, cable trolley component, cable holder, cable trolley -Manufacturer: Abus, 3 pieces cable trolley plastic with polyamide rollers -Type: flat cable -Shipping/Price: complete -Dimensions: 90/70/H75 mm -Weight: 0.1 kg/piece
used
Electric chain hoist, crane, overhead crane, assembly crane, manual trolley, trolley, trolley drive, crane drive, crane travel, trolley -Manufacturer: Abus, electric chain hoist with driven chassis -Chain hoist: Abus type GM3- Load capacity 500 kg -Main stroke: 6 m/min -Fine stroke: 1.5 m/min -Chain length: 3 m -Chassis: Abus -Beam width: max. 260 mm -Dimensions: see photo and technical drawing -Transport dimensions: 520/400/H440 mm -Weight: 41 kg
used
Suspension clamp, clamp sleeve, sliding gate sleeve, cable clamp, cable trolley, cable trolley component, cable holder, cable trolley -Cable trolley: Cable trolley with polyamide rollers -Type: Round 10-16 mm -Number: 1 cable trolley available -Dimensions: 80/80/H93 mm -Weight: 0.1 kg
used
Overhead crane, crane, electric hoist, manual trolley, trolley, crane trolley, crane trolley, crane trolley, trolley, girder trolley, monorail trolley, hoist -Manufacturer: Abus, crane chassis with electric cable winch -Cable pull: Type GM1032FD -Load capacity: 3200 kg -Main stroke/fine stroke: 5/0.7 m/min -Hook path: 6.0 m -Roller spacing: 1400 mm, dimensions see photos -Drive system: Abus -Accessories: Connection cables, without crane operation -Transport dimensions: 1550/1180/H530 mm -Weight: 512 kg
used
weight max.: 0,5 t stroke: 500 mm height of hook: 1750 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
arm length: 3600 mm total column height: ca 5500 mm weight max. in kg: 1000 kg travel of hook: 3000 mm height of hook: ca. 4000 mm weight of the machine ca.: 1,5 t dimensions of the machine ca.: 6,0 x 2,0 x 1,0 m Pillar Type Swivelling Crane - Electric chain hoist 1 SN Speed: 4.6 / 1.2 m/min - with trolley System is dismantled. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Abus Jib crane 3 meter / 250 kg
used
Abus Jib crane 3 meter / 500 kg
used
Abus Jib crane 2.5 meter / 250 kg
used
Abus Jib crane 3 meter / 250 kg
new
weight max. in kg: 250 kg arm length: 4000 mm height: 3425 Unterkante Ausleger total column height: 4.025 mm swivelling range: 270 Grad Total weight, approx.: 375 kg Description: - Load capacity 250 kg - projection 4000 mm - Construction height 4025 mm - Crane lacquer in color RAL 1007 daffodil yellow - Calculation basis DIN 15018 - Crane classification H2 / B2 - Operating location hall operation - Size / bracket profile LS36 / FormC 110x90 - Height of the lower edge of the boom 3425 mm - Operating voltage 3 / PE ~ 50 Hz 400 V - Direct control type of control - Degree of protection IP55 - Swivel range, nominally 270 ° - Panning by hand including: - Anchor rods size LS 36 - Consists of 8 pieces M24 mm x 800 mm, with 1 steel template (420/8) for - Fastening to the foundation, including accessories Electric chain hoist: - Chain hoist type GM 2 250.6-1, 1-leg - painted in color RAL 5017 - t ...
new
weight max. in kg: 500 kg arm length: 4000 mm height: 3425 Unterkante Ausleger total column height: 4215 mm swivelling range: 270 Grad Total weight, approx.: 550 kg Description: - Trolley power supply - Trailing cable, cable slack approx. 800 mm - Operation from the hallway using a pendant control including: - ABUS electric chain hoist - Chain hoist type GM 2 500.4-2, 2-leg - painted i color RAL 5017 traffic blue - load capacity 500 kg - hook path 3000 mm - highest hook position 2965 mm - Calculation basis FEM 9.901 - Drive group 2m / M5 - Lifting, 2-stage (pole switchable) 1/4 m / min - Lifting power 0.09 / 0.35 kW - duty cycle 60% ED - Circuits 360 c / h Overload protection The crane system complies with the requirements of the Machinery Directive 2006/ 42 / EC as well as the currently valid UV regulations DGUV regulation 52 (formerly BGV D6). included : - Anchor rods L200 (set) size L ...
new
weight max. in kg: 1000 kg arm length: 4000 mm height: 3000 Unterkante Ausleger total column height: 3790 mm swivelling range: 270 Grad Total weight, approx.: 525 kg Description: - Trolley power supply - Trailing cable, cable slack approx. 800 mm - Operation from the hallway using a pendant control including: - ABUS electric chain hoist - Chain hoist type GM 4 1000.5-2, 2-leg - painted in color RAL 5017 traffic blue - Load capacity 1 t - hook path 3000 mm - highest hook position 2442 mm - Calculation basis FEM 9.901 - Drive group 2m / M5 - Lifting, 2-stage (pole switchable) 1.3 / 5 m / min - Lifting capacity 0.22 / 0.9 kW - duty cycle 60% ED - Circuits 360 c / h Overload protection The crane system complies with the requirements of the Machinery Directive 2006/ 42 / EC as well as the currently valid UV regulations DGUV regulation 52 (formerly BGV D6). included : - Anchor rods L200 (set) ...
used
used
used
Load capacity: 500kg, lifting speed: 6m/min. Documentation available. On-site inspection is possible.
used
Jib Crane, Column-Mounted Crane, Column Jib Crane, Crane 250 kg, Used Machine Manufacturer: Abus Load Capacity: 250 kg Column Height: 2900 mm Reach: 2600 mm Hoist: Demag, Chain Hoist Type: DKUN 2-250 K V2 Load Capacity: 250 kg Lifting Height: 2600 mm IP Rating: IP 55
used
arm length: 4000 mm weight max. in kg: 1000 kg swivelling range: mindestens 160 Grad height: 4000 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Schneider Automatic Demga Hoist 500 KG The techn. Information is provided by the manufacturer or operator and is therefore non-binding. We reserve the right to prior sale, Our terms of sale apply exclusively. About us More than 400 of our own machines in the warehouse More than 12,000 m² of storage space, crane capacity 70 t More than 1000 items Accessories for your workshop If you want to sell machines, systems or your company, then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
arm length: 3500 mm weight max. in kg: 1000 kg swivelling range: mindestens 160 Grad height: 3000 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Schneider Automatic Demga Hoist 500 KG The techn. Information is provided by the manufacturer or operator and is therefore non-binding. We reserve the right to prior sale, Our terms of sale apply exclusively. About us More than 400 of our own machines in the warehouse More than 12,000 m² of storage space, crane capacity 70 t More than 1000 items Accessories for your workshop If you want to sell machines, systems or your company, then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.