v trade accessories for machine tools used for sale

: 600 mm : 500 mm : 400 mm : 1000x500 mm : 1200x250 mm : 40-3200 U/min : DIN 2080 ISO 40 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 1050 mm : 480 mm : 550 mm : 1524x380 mm : SK 40 : 127 mm : 105 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 50 mm : 1275 mm : 1330 - : MK 5 bore depth: 270 mm spindle turning speed range: 44-1206 U/min The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 585/600 mm : 465/480 mm : 385/400 mm : 900x500 mm : 1200x250 mm : 40-2000 U/min : SK 40 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 600 mm : 500 mm : 400 mm : 1000x500 mm : 1200x250 mm : 40-3200 U/min : DIN 2080 ISO 40 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 600 mm : 500 mm : 400 mm : 1000x500 mm : 1200x250 mm : 40-3200 U/min : DIN 2080 ISO 40 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 420 mm : 220 mm : 380 mm : 840x390 mm : 950x250 mm : 65-2600 U/min : DIN 2080 ISO 40 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

thickness of jaw: 160 mm total power requirement: - weight of the machine ca.: - The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

thickness of jaw: 100 mm total power requirement: - weight of the machine ca.: - daylight opening: 90/105 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 0600 mm table width: 420 mm table height: 300 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

thickness of jaw: 038 mm total power requirement: - weight of the machine ca.: - clamping width: 75 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

thickness of jaw: 088 mm total power requirement: - weight of the machine ca.: - clamping width: 125 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

thickness of jaw: 073 mm total power requirement: - weight of the machine ca.: - clamping width: 100 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

thickness of jaw: 063 mm total power requirement: - weight of the machine ca.: - clamping width: 90 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Tol measurements: - weight max.: - range L-W-H: 960x650x840 mm tool adaptor: ISO 40 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 1000 mm table width: 800 mm table height: 560 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

thickness of jaw: 160 mm total power requirement: - weight of the machine ca.: - The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Tol measurements: - weight max.: - range L-W-H: 960x650x840 mm tool adaptor: ISO 50 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

thickness of jaw: 098 mm total power requirement: - weight of the machine ca.: - clamping width: 125 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

thickness of jaw: 073 mm total power requirement: - weight of the machine ca.: - clamping width: 100 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 1200 mm : 580 mm : 600 mm : 1575x425 mm : SK 40 : 152 mm : 110 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

thickness of jaw: 200 mm total power requirement: - weight of the machine ca.: - daylight opening: 310 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

thickness of jaw: 130 mm total power requirement: - weight of the machine ca.: - daylight opening: - The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

thickness of jaw: 130 mm total power requirement: - weight of the machine ca.: - daylight opening: 100/110 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

thickness of jaw: 160 mm daylight opening: - total power requirement: - weight of the machine ca.: 115 - The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

thickness of jaw: 100 mm total power requirement: - weight of the machine ca.: - The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 35 mm throat: 320 mm bore stroke: 160 mm no. of turning speeds: stufenlos Stufen spindle turning speed range: 65 - 460 / 460 - 3250 U/min feeds: 0,1 - 0,2 - 0,3 mm/U spindle taper: MK 4 table surface area: 500 x 420 mm base plate: 650 x 450 mm Distance spindle/table max.: 500 mm column diameter: 120 mm distance spindle/base plate: 1100 mm Total height: 2200 mm voltage: 400 V / 50 Hz drive motor: 1,5 kW coolant pump drive: 0,2 kW total power requirement: 1,7 kW weight of the machine ca.: 0,550 t dimensions of the machine ca.: 0,6 x 0,8 x 2,2 m Industrial, gear-driven drilling machine, with coolant device, adjustable drilling depth, left-hand and right-hand rotation of the spindle, motor with 2 speeds, work light, table can be rotated and tilted, The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 250 mm capacity 90 degrees: flat: 250 x 450 mm capacity 45 degrees: round: 190 mm capacity 45 degrees: square: 250 x 190 mm table height: ca. 650 mm saw band length: 3300 mm dimensions of saw-band: 3300 x 27 x 0,9 mm cutting speed: 21 - 62 m/min total power requirement: 1.5 kW weight of the machine ca.: 320 kg dimensions of the machine ca.: 1739 x 571 x 1130 mm very rarely used () Furnishing: - electro-hydraulic horizontal band saw - precise saw blade guidance - continuously adjustable belt speed - Continuously adjustable feed from the saw frame - heavy cast construction - manual quick material clamping - Setting options for miter cuts - Replacement saw blades - Coolant device Machine link: https://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=100 8-9173350 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Offer 25319 Specifications: - Drilling capacity in steel ST 60 35 mm - Drilling spindle holder MK 4 - Drilling spindle stroke 160 mm - Drilling spindle speeds 65 - 3250 rpm - 3 feeds 0.1 / 0.2 / 0.3 mm/rev - Projection 320 mm - Max. distance table - drilling spindle 560 mm - Table with 2 T-slots 500 x 420 mm - Height adjustable via rack with hand crank - Table left + right tiltable - Drive 400 V / 1.5 kW - Space requirement approx. W 550 x H 2200 x D 900 mm - Weight approx. 550 kg - with: - Right – Counterclockwise - Coolant device -Lighting

Offer 25498 Technical data: - Drilling capacity 50 mm - Tapping device up to M 40 mm - Tool holder MK 5 - Spindle stroke 280 mm - Spindle speeds 38 - 2000 rpm - 6 feed speeds 0.08 - 0.83 mm/rev - Drive 400 V / 5.5 kW - Radius min. / max. 350 / 1400 mm - Removal of spindle - machined base plates - min / max 350 / 1250 mm - Machined base plate with T-slots W 1650 x D 930 mm - electr. Central clamping - Coolant device + lighting - Dice table - Space requirement approx. W 2300 x H 2400 x D 1050 mm - Weight approx. 3500 kg

: 600 mm : 500 mm : 400 mm : 1000x500 mm : 1200x250 mm : 40-3200 U/min : DIN 2080 ISO 40 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3140 mm plate thickness: 6.5 mm ST thickness at Niro-steel: 4.0 mm VA bending angle max.: 0 - 135 ° daylight opening: 100 mm back stop - adjustable: max. 800 mm Control: M 15 S total power requirement: 7.5 kW weight of the machine ca.: 6350 kg dimensions of the machine ca.: 4350 x 2250 x 1900 mm current new price approx. 60.000 euros special price on request Description : - robust folding machine - high precision for wide bending processes - increased rigidity in design - hydraulic drive - with rack and pinion for better control and accuracy - compared to normal hydraulic systems Easy adjustment of material thickness Adjustable hydraulic pressure to adjust the thickness of the material This prevents damage to the surface of the materials - Smallest return bend 25 mm Equipment: - Program control M 15 S with LED display for bending angle adjustment - Manual backgauge 0 ...

: 420 mm : 220 mm : 380 mm : 840x390 mm : 950x250 mm : 65-2600 U/min : DIN 2080 ISO 40 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 420 mm : 220 mm : 380 mm : 840x390 mm : 950x250 mm : 65-2600 U/min : DIN 2080 ISO 40 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 420 mm : 220 mm : 380 mm : 840x390 mm : 950x250 mm : 65-2600 U/min : DIN 2080 ISO 40 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Article: profile turning trip dog Manufacturer: Schütte Many different sizes for Schütte profile turning attachment 68AE Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

pickoff with shaft for Schutte multi spindle automatic lathe SF67, used pickoff C26GF pickoff shaft C26GF9S1 gear WG-67S Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

Article: draw bar Manufacturer: Schütte For multi spindle automatic lathes of different sizes Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

Article: quadrant lever Manufacturer: Schütte For multi spindle automatic lathes of different sizes Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

Article: feed lever Manufacturer: Schütte For multi spindle automatic lathes of different sizes Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

Article: push rod Manufacturer: Schütte For multi spindle automatic lathes of different sizes Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

Article: push lever Manufacturer: Schütte For multi spindle automatic lathes of different sizes Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

Assortment of tools / accessories for die-sinking EDM machine Without! Surface-mounted clamping aids and HIRSCHMANN clamping elements!

Article: pickoff with shaft Manufacturer: Schütte pickoff with shaft for Schutte multi spindle automatic lathe SF67 pickoff C26GF pickoff shaft C26GF9S1 gear WG-67S holder B73GF1S1 Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

polygon turning unit for Schutte AG20, used 1 polygon turning unit type Saco SC 15.22.001-Nr.3 1 cardan shaft type Saco SC 15.52.188.00 1 gear box SC 15.22.001-Nr. 3 Please, contact us for getting more informations and pictures on mail@tar-mc.com or www.tar-mc.com

Various parts. Auction-ID: A1-47074-64

Machine clamp. Auction-ID: A1-47074-68

Auction-ID: A1-40976-133

Auction-ID: A1-40976-134

Accessories and tools for Mori Seiki SL 15

Accessories and tools for Mori Seiki SL 15

Chip tipping bucket

Chip tipping bucket

EROWA Pallets ER-024323 There is a new EROWA pallet of type ER-024323 for sale. The pallets are in their original packaging.

Multifix size C 14 pieces. Used See pictures Viewing desired By appointment

Machine clamp.

EROWA Pallets ER-024323 There is a new EROWA pallet of type ER-024323 for sale. The pallets are in their original packaging. Auction-ID: A1-46872-15

Brand: TUL Type: CNC Tool Storage Cart (1 wheel that doesn't work) Model: SK50 (ISO50) tool holder compatible Capacity: approx. 20–25 units Manufacture: steel structure + TUL moulded supports in industrial composite Miscellaneous Tools see photo Auction-ID: A3-43535-33325

Multifix size C 14 pieces. Used See pictures Viewing desired By appointment Auction-ID: A7-46993-4

Accessories and tools for Mori Seiki SL 250 Auction-ID: A7-47048-71

Accessories and tools for Mori Seiki SL 15 Auction-ID: A7-47048-70

Accessories and tools for Mori Seiki SL 15 Auction-ID: A7-47048-69

Chip tipping bucket Auction-ID: A1-47219-54

Chip tipping bucket Auction-ID: A1-47219-55

Dimensions: White long: 295x58x40 Black cooling water tank: 260x45x40 Black chip conveyor: 190x57x115 White cooling water tank: 100x100x118 Auction-ID: A1-47219-15

Chip tipping bucket Auction-ID: A1-47219-53

Chip tipping bucket Auction-ID: A1-47219-52

Pallets with various materials (garden tools, brooms, etc.) Auction-ID: A1-47219-162

Lot consists of industrial drilling tools, diameters Ø5.5 mm, Ø10.6 mm Auction-ID: A7-46756-229

Mixed lot of MAPAL WWS tooling system. Includes 1x indexable cutting head and 1x Ø16 MAPAL tool (30320052), along with screws and documentation. Auction-ID: A7-46756-209

Set of adjustable hand reamers by Walton Tools (USA, West Hartford, since 1908). Includes two plastic cases with multiple adjustable reamers and blades in various sizes Auction-ID: A7-46756-210

Hartner Multi-Step Drills Precision reimagined. Efficiency made tangible. Made in Germany. The multi-step drills are the intelligent further development of classic HSS and HSS-E twist drills. Thanks to their innovative step-drill geometry, the drills deliver significantly higher performance, greater precision, and noticeably improved drilling comfort in daily use. What makes the multi-step drill so special? Unlike conventional HSS drills that machine material in a single cutting action, the multi-step drill works in several defined cutting stages. The result is smooth, low-vibration operation with significantly lower force requirements. Additional advantages include optimal chip removal, perfectly round and precise holes, and almost burr-free hole exits. Even when used with hand drills and cordless drills, the special geometry enables controlled drilling without jamming or slipping in t ...

Transmission belts, drive belt, flat belt, leather belt, belt, transmission belt FROM leather, fabric, rubber, plastic direct from the manufacturer! All dimensions and qualities according to your possible! We customize for you and look forward to your inquiry!

Convolute (excerpt) from different tools - see picture

Pneumotec Workpiece Accumulator PWS 100 Year of construction: 06/2013 Plate diameter 220 mm Number of plates: 20 pieces Height 1200 mm +/-100 mm adjustable Width 780mm Length 3150mm

Including milling heads and holder Auction-ID: A1-43894-55

Precise 0,6kw ESC 3043 +Control Unit 50k 1min. pneum. Tool change D.4mm Total weight 15kg. Only the spindle without cable weighs approx. 3.5kg Pneumatic collet/tool change. Diameter 4.00mm Max. speed 50,000, minimum 10,000 is specified. According to the controls, however, it somehow goes up to 6000 down. Water cooling is necessary during operation, this is all described in the original operating instructions. Water cooling is not included. The requirements are described. There is at least talk of liquid cooling on the technical drawing. Very good used condition, full function. You will receive an invoice in paper form. Differential taxation according to sec. 25a of the German VAT Act. Therefore, no VAT is shown on the invoice. 24 63 87 F1448 (internal article number)

suitable for Peddinghaus profile steel shears Effective length 2,000 mm

Universal plan and boring head ISO - 50 recording

3-points Steady Ø 350 mm for SCULFORT Lathe Centre height: 550 mm Maxi diameter: Ø 350 mm Distance between fixing V: 350 mm Width: 1200 mm Thickness: 300 mm Total height: 1300 mm Weight: approx 250 kg

Including clamping tools, drills, inserts, tools, in 1 cabinet (700x730x1040)

Touches 3-points Steady Ø 800 mm for SCULFORT Lathe Centre height: 550 mm Maxi diameter: Ø 800 mm Base dimensions: L 635 x W 300 mm Distance between fixing V: 480 mm Width: 1600 mm Thickness: 350 mm Total height : 1500 mm Weight: approx 250 kg

dimensions of the machine ca.: 380 x 200 x 134 mm weight of the machine ca.: 24 kg power requirement: - kW baseplate-clamping range: 110 x 70 mm workpiece sizes: max. 56 x 70 x 25 mm profile depth: max. 15 mm angular adjustment: 0-2 ° Condition: unused: Electrik 24 Volt: Unused unit in a wooden box. Clamping: permanent-magnetic, to use on a table of a grinding machine for grinding pieces with angle. Detailed describtion see attached PDF. doc. Machine dealer with own stock of 1600 m². The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

consisting of a vice, jaw width: 160 mm and a three-jaw chuck from the manufacturer RÖHM, diameter: 400 mm Reference: Schmidt - Lot 12 Weight: approx. 150kg

Including milling heads and holder

Revolving Center MK - 5 with changeble points

Knoll High Pressure System KF 110/700 Year of Make: 2017 Paper Belt Filter Tank capacity: 600 litres Mas. Pressure: 70bar Little used. Like new

WKZ spindle SK40 Used

Details: Year of construction 2021 The Haimer Power Clamp Economic Plus NG is a high-performance shrink device that is known on the market for its high reliability and precision. Its low power consumption and robust construction make it an ideal choice for any workshop. Technical data: Power consumption: 1.5 kW Shrink range: 3 - 32 mm Dimensions (L x W x H): 600 x 800 x 1200 mm

Including clamping tools, drills, inserts, tools, in 1 cabinet (700x730x1040) Auction-ID: A1-43894-29

Including clamping tools, drills, inserts, tools, in 1 cabinet (700x730x1040) Auction-ID: A1-43894-30