tronzadoras mg saws used for sale

Cutting range at 90°: Ø 340 / Flat W 500 x H 340 mm Miter: 60°L - 90° - 60°R; Stepless belt speed 26/86; Hydraulic vice Saw blade dimensions: 4380x34x1.10 mm 950 kg Recent Showroom Machine

Cutting area at 90° Ø 135 --- flat W 250 x H 85 mm --- 4-carat 100 x 100 Miter: 22.5°L - 45°L - 90° - 45°R - 0°R HM circular saw blade Ø 400 mm Two-hand operation

Cutting range at 90° Ø 180mm Flat W 300 x H 125 mm --- 4-car. 150 x 150mm Miter: 22.5°L - 45°L - 90° - 45°R - 0°R HM circular saw blade Ø 500 mm Two-hand operation

Cutting range at 90°: Ø 340 / Flat W 500 x H 340 mm Miter: 60°L - 90° - 60°R; Stepless belt speed 26/86; Hydraulic vice Saw blade dimensions: 4380x34x1.10 mm Total weight 950 kg Original packaging, extensive accessories

saw blade diameter: 350 x Ø 32.0 mm capacity 90 degrees: flat: 175 x 75 mm capacity 90 degrees: square: 110 x 110 mm capacity 45 degrees: flat: 100 x 80 mm capacity 45 degrees: square: 85 x 85 mm turning speeds: 3000 U/min total power requirement: 1.5 kW weight of the machine ca.: 180 kg dimensions of the machine ca.: 870 x 710 x 1435 mm Equipment : - semi-automatic circular saw for cutting PVC and aluminum profiles - two-hand safety operation - Miter adjustment : left 0 / - 45 / - 60 right 0 / 45 / 90 - Large protective hood, covers entire working area - Saw blade - 2x vertical pneumatic clamping cylinders - Adjustable blade and cutting feed - Air dust gun Work sequence 1) Setting the cutting angle 2) Inserting the material 3) Adjusting the stroke speed 4) Bring the clamping cylinder up to 20 mm of material 5) Clamp the material 6) The machine is ready for operation by pressing the s ...

Cutting length: 5000 mm blade diameter: depending on need 420-550 mm saw aggregate pneumatic swivel 45-90° Blade drive: 380 V, per 3 kW space: 6400 x 1400 x 1700 mm weight: approx. 1600 kg

Qty. 1 Second-hand rail hard metal saw with drilling unit Mfc.: Heller Type: TEK001-73-37 Saw carriage: 610 ? 710 mm Cutting speed ? 6 stages: 63-200 m/min. Cutting area: rail height up to: 200 mm rail width up to: 200 mm Feeding speed: 50 ? 1250 mm/min. Power: 50 kW Drilling unit Qty. 3 Drilling spindles Drill diameter: 12 ? 40 mm z-stroke: 630 mm z-drill stroke (adj.): 250 mm Tool changing stroke (adj.): 380 mm Drill spindle diameter: 60 mm Min. distance from the end of the rail: 33 mm Drill spindle distance - spindle 1-3: min. 228 mm max. 600 mm Drill spindle distance ? spindle 1-2: min. 114 mm max. 486 mm Drill feeding speed: 40 ? 200 mm/min. Motor power: 30 kW, 1420 RPM Revolution range: Qty. 9 225 ? 280 ? 350 ? 450 ? 560 ? 710 ? 900 ? 1120 ? 1400 RPM

Cutting length: min/max at 90 ° 330/5000 mm blade diameter: 450/500 mm kl.90°: 330 mm blade diameter cutting length: 450/500 mm Drive motor per unit: 2,2 kW Electr. Supply: 400 V, 5.2 kW Space requirements: 6760 x 1590 x 1700 mm weight: 1550 kg

Technical data: Saw blade diameter: 520mm Mitre: 90° / 45° / 30° Drive capacity: 1.6 / 2.8 kW Dimensions: WxDxH 1520x1520x1560mm Working height: 900 mm Weight: 1250kg

Cutting area round / square 90°: 255 mm / 210 x 210 mm Cutting area flat 90°: 310 x 210 mm Cutting area round / square 45°, right: 220 mm / 210 x 210 mm Cutting area flat 45°, right: 220 x 200 mm Cutting area round / square 45°, left: 230 mm / 200 x 200 mm Cutting area flat 45°, left: 230 x 200 mm Cutting area round / square 60°, right: 135 mm / 135 x 135 mm Cutting area flat 60°, right: 135 x 135 mm Sawband dimensions: 2750 x 27 x 0.9 mm Cutting speeds: 35 / 70 m/min Motor recording power S6 40%: 2.2 kW Working height: 930 mm Delivery: - Saw band - Material stop - Manometer (band voltage) - Saw band hard metal guides - Vice with quick release - Integrated coolant equipment - Hydraulic iron lowering - Motor circuit breaker - Automatic final shutdown - Base

Execution semiautomatic 90° diameter: 600 800 x 600 mm Engine: 14,5 kW Blade: 9000 x 67 x 1, 6 mm Min. diameter: 10 mm Working height: 630 mm Weight: 4.3 to.

Saw blade diameter: 400 mm cutting capacity at 90 ° round: 130 mm cutting capacity at 90 ° square: 200 x 80 and 315 x 40 mm cutting capacity in MITRE at 45 ° square: flat/vertically 180 x 70 / 100 x 60 mm cutting speed: 19/28 m / min drive motor: 380 V, 1.7/2,6 kW space: 1100 x 1050 x 1620 mm weight: 850 kg

Standard equipment torsion-resistant, robust cast-iron saw frame driven shaving brush powerful industrial worm gear motor automatic shutdown after cutting end mechanical saw band tension with electrical band breakage monitoring Quick-release vice, movable Hydr. Saw frame lowering with rapid response function (infinitely adjustable) electric coolant pump Precision carbide saw band guides, ground (adjustable) large-sized round support table, with miter cuts, miter indicator (scale) to the operator side direct switching from manual operation to downing mode easily removable chip collecting tray Material stop 500 mm with scale incl. saw band combing gearing 4/6. Techniche Data Motor three-phase current 400 V, pole switchable 1.1/1.5 kW Saw band Dimensions 2720 x 27 x 0.9 mm Flywheels 300 mm Cutting speed 40/80 m/min. Vice-height span 275 mm Working height 978 mm Weigh ...

Delivery time immediately from stock! Motor three-phase current 400V with frequency converter (kW) 4.0 Table dimensions (mm) 600 x 600 Cutting width (mm) 400 Cutting height (mm) 390 Cutting speed (m/min) 50 – 1000 Band saw blade dimensions (mm) 3600 x 13 x 0.9 Machine dimensions without packaging (mm) 2225 x 1120 x 770 Weight (kg) 465 Standard equipment Precise drive controlled via a frequency converter Digital speed display Stepless belt speed Balanced intervertebral discs Hard rubberized treads Hardened and ground guide jaws LED task light Height-adjustable guide arm Machine colour RAL 7005 / RAL 7035 12-month warranty for single-shift operation

MKS 315 N Metal cutting circular saws Motor: 1.5/2.2 of kW 50 Hz 400V Speeds: 40/80 1/min Span Vice: 120 mm Saw blade diameter: 315 mm Infeed height incl. pedestal: 1015 mm Dimensions: 1000 x 1150 x 1475 mm Weight: 165 kg G & pieces 3620303SET

Cutting range 90°, round: x 64 mm Saw blade: 250 x 2.5 mm Engine power: 1.5 kW Connection: 400 V Weight, approx.: 110 kg Standard: - Saw blade of 250 x 2.5 mm - Base - CE

Cutting speeds: 40/80/min Mitre range: left up to 45° / right up to 60° The saw frame is brought to the starting position by hand. The lowering speed is controlled by a throttle valve (on the countersink cylinder) and as soon as the saw frame has reached the end position, the belt run switches off. You don't have to stand by the machine when sawing. The saw has an electric cooling water pump and a service has been carried out on the saw. The vice has a quick-release device Options: 1x saw blade 2720x27x0.9mm Number of teeth of your choice - from 5 saw blades 5% - from 10 saw blades 10% 5kg coolant concentrate 10kg coolant concentrate

Cutting range 90°, round: 225 mm Cutting range 90°, square: 200 x 200 mm Cutting range 45°, round: 160 mm Cutting range 45°, square: 160 x 160 mm Cutting range 60°, round: 100 mm Cutting range 60°, square: 100 x 100 mm Saw band: 2480 x 27 x 0.9 mm Cutting speeds: 45 / 90 m/min Engine power: 1.5 kW Voltage: 400 V Delivery - BiMetal saw band 2480 x 27 x 0.9 mm, 6/10 ZpZ - Carbide guides (4 jaws) - Adjustable workpiece stop 0.5 m - Manometer for belt tension - Vice with quick release - Integrated coolant equipment - Hydraulic iron lowering - Motor circuit breaker - Automatic final shutdown - Base

Qty. 1 Second-hand hot circular saw Mfc.: TBA Built – Bj.: 1950 overhauled 1972 Saw blade dia. – Sägeblattdurchm.: 1,600 mm Saw blade feeding with hydraulic drive Sägeblattvorschub mit hydr. Antrieb Hydraulic station Hydraulikstation Dimensions of piece for cut: min./max. 70 / 185 mm square Abmessungen des zu schneidenden Materials: min./max. 70 / 185 mm

Overhaul year 2020 Built 1995-2019 Saw blade 160 - 200 mm Drive power saw motor 2.2 KW Speed Saw blade 1,500 -3,750 min-1 Cutting speed Saw blade 750 - 3350 m/min Saw height control infinitely adjustable fully electronic Working area square 90° max.: 50 x 50 mm Working range flat 90° max.: 110 x 50 mm Working area Around 90° max.: 50 mm Supply length Pneumatics 2.5 - 350 (single stroke) 5 - 700 (double stroke) Supply length AC Servo 2.5-9999 mm (optional) Supply supply. Servo-controlled replenishment unit 500 mm/s Compressed air connection 6 bar Weight (saw) approx.: 600 Kg Dimensions LxWxH (saw without attachments)approx.: 1400mm x1000mm x1600mm Technical Description Pressta Eisele Profilma 200 Retrofit Pressta Eisele Profilma 200 Retrofit Fully automatic high-performance sawing machine for non-ferrous metals and material The machine is technically as well as ...

Saegebaender Roentgen, new

Saw blade Diameter 400 mm Saw capacity 150 mm round Suitable for: - Plastic pipe - Air clamping Country of origin Netherlands Engine power 2.2 kW Machine Weight 750 kg

CNC – controlled two-head double miter circular saw machine for the rational cutting of profiles made of aluminium – non-ferrous metals and various plastics. The machine can be used for single cutting – to saw the profile with two saw heads at the same time – or in automatic mode – here the two-head saw becomes a single-head saw The PKM 500 DG model is available in two versions – Version A – electrical / electronic miter adjustment of the saw heads, miter angle infinitely programmable between +/- 20°, CNC control with color graphics – profile drawings can be read as DXF file – remote maintenance via TeamViewer – software for wing cutting. Version B - pneumatic miter adjustment of the saw heads to preset stops, miter angle infinitely programmable between +/- 20°, CNC control with simple color graphics with the possibility to create cutting lists. Saw blade ...

IMMEDIATELY AVAILABLE - video link on request CNC-controlled 3-axis sawing and drilling center for sophisticated production technology Encapsulated, compact machine - designed as a closed production island - no noise and no chips in the machine environment - large extraction connection for efficient chip extraction. (The machine is also supplied as a two-axis sawing center without drilling unit). Dimensionally accurate 90° saw cuts both in small series and in large series production. CNC control based on Windows® with touch screen and color screen, simple menu-driven programming with symbols, remote maintenance module. Absolutely burr-free precision sawing of all materials such as - aluminum - bronze - GRP (glass fiber reinforced plastics) - wood - copper - brass and various plastics such as PVC and polyamide. Drilling (through holes and blind holes – step drills  ...

oven 650 inner 1x1x1.2m (possible various size) t max 650 PLC Tiefofen zum Homogenisieren von Walzbarren Wärmezubehandelnde Barren werden auf einer Stirnseite stehend mittels Krananlage und Zangeneinrichtung in den Ofen eingesetzt. Die Erwärmung der Barren wird bei mehrreihigem Einsatz durch Hochkonvektion mit entsprechend angeordneten Düsen und Düsenkanälen gleichmäßig erwärmt. Nach Ablauf der Homogenisierungszeit wird die Barrentemperatur auf Walztemperatur abgesenkt und die Barren stehen für die einzelne Abnahme im Walz-Takt zur Verfügung. Die Öfen können direkt und indirekt Gas oder elektrisch beheizt ausgeführt werden. Herdwagenofen Rollenherdofen Kammerofen Drehtellerofen Wagenherdofen & Tunnelofen Haubenofen Schachtofen Sonderanlagen Ofenanlagen zum Glühen von Aluminium Die Bandbunde werden mit Ihrer Achse horizontal in den Ofen eingelegt. Die Aufnahme er ...

Semi-automatic undercounter circular sawing machine for cutting aluminum, non-ferrous metals, wood and various plastics Clean, burr-free cut edges as if polished. Saw blade diameter Ø 600 mm Saw blade drive power 3 kW Saw blade path upwards for sawing - downwards for empty stroke Mitre adjustment range infinitely variable from 10° to 170° - with grid dots at + 45° and – 45° Pneumatic saw table clamping Digital display for mitre angle Sawing range 90° - approx. 400 x H 135mm or 460 x H 100 mm Sawing range 45° - approx. 190 x H 60 mm or 120 x H 150 mm Saw blade feed speed infinitely variable by means of a handwheel. Adjustment range material stop forward and backward approx. 180 mm Automatic spray mist lubrication Compressed air requirement 6 to 8 bar Dimensions approx. 1.1 m x 1.2 m x H 1.65 m Weight approx. 310 kg

- 400 Volt, three-phase motor with brake, 2 kW - 420 mm disc - cutting height 170 mm - cutting length 410 mm - hydraulic feed brake - cooling system - compressed air preparation station - pneumatic pressure on both sides

Very high-quality CNC – controlled under-table two-unit double miter precision circular sawing machine with schifter cutting device (heavy version - 3,500 kg dead weight) Brand new, immediately available from stock (subject to prior sale). For the precise and rational cutting of large and heavy profiles made of aluminium - non-ferrous metals - various plastics. The machine can be used both for single cutting - when cutting with two sawing units at the same time (smallest section length 450 mm / largest section length 5,000 mm) or in automatic mode – when used as single-unit circular saw machines, so that Section lengths from 5 mm to 15,000 mm and longer possible. Five CNC axes for the electronic rotation of the saw tables infinitely variable over the entire rotation range, the vertical inclination of the saw blades electronically infinitely variable bet ...

Semi-automatic circular sawing machine with radial cut for cutting aluminium, non-ferrous metals, wood and various plastics Clean, burr-free cut edges as if polished. Saw blade diameter Ø 600 mm Saw blade drive power 4 kW Saw blade travel forward for sawing - backward for empty stroke Mitre adjustment range infinitely variable from 20° to 125° Digital display for mitre angle Sawing range 90° - approx. 230 x H 180mm or 300 x H 120 mm Sawing range 45° - approx. 160 x H 180 mm or 210 x H 120 mm Saw blade feed speed infinitely variable by means of a handwheel. Automatic spray mist lubrication Compressed air requirement 6 to 8 bar Dimensions approx. 1.55 m x 0.96 m x H 1.65 m Weight approx. 670 kg

Very high-quality CNC – controlled two-unit double mitre precision circular sawing machine (heavy version - 2,500 kg dead weight) Brand new, immediately available from stock (subject to prior sale) For precise and rational cutting even of large and heavy profiles made of aluminium - non-ferrous metals - various plastics. The machine can be used both for single cutting - when cutting with two sawing units at the same time (smallest section length 370 mm / largest section length 6,000 mm) or in automatic mode – when used as single-unit circular saw machines, so that Section lengths from 5 mm to 15,000 mm and longer possible. Three CNC axes, electronic inclination of the saw units infinitely variable over the entire inclination range. SCHNEIDER® feed motors and electronic motor controllers. CNC control with Windows 10 operating system and 10.4" color di ...

Semi-automatic, double-sided mitre band saw with turntable Swivel bracket design, mitre angle: 30°-90°-45° Material tension: hydraulic, saw bracket feed: hydraulic, Lifting bracket: hydraulic, speed: 37 / 74 m/min, belt dimensions: 3100 x 27 mm, 45°: round 240, square 240, rectangle 260x220 mm, 30°: round 190, square 180, rectangle 200x100 mm, saw feed infinitely adjustable via fine throttle, hydraulic material tension, opens and closes automatically, quick-release vise, can be used to the right or left of the belt, Ball-bearing turntable with grid and quick clamp for holding the saw frame, Particularly easy swivelling of the bracket, Large doors for easy belt change from the front, Manually stepless adjustment of the mitre angles, Material feed from the left or right possible Lifting bracket hydraulically, Automatic adjustment of the stirrup height according to material diame ...

UKM 600 DG High quality semi-automatic under-table double miter circular sawing machine, for cutting profiles and solid material made of aluminum – non-ferrous metal – plastics – wood and other soft materials Largest saw blade diameter 600 mm Cutting range - 0° - 400 x H 135 mm, 245 x H 100 mm, 190 x 190 mm - 45° - 160 x H 100 mm, 145 x 145 mm Saw blade speed 2,800 rpm Stepless miter adjustment + 10°/-170° with grid points at +/- 45° and 0° Saw blade drive power 3 kW Dimensions approx. 1.1 x 1.2 m x H 1.65 m Weight approx. 310 kg

Machine Type: Circular Saw Manufacturer: Kaltenbach Type: SKL 350 Year of construction:- Condition: used Offer will only be sent if a complete imprint is provided! Price 1.190 Euro incl. VAT Location Warstein , Germany Reference M-KAL-0724 DESCRIPTION We offer you a used circular saw from the manufacturer Kaltenbach. Technical data will follow. Availability: from 01.08 Our offer is aimed at tradespeople who are registered within the meaning of the Trade Regulation Act according to §14 GewO. The offer is subject to change, subject to prior sale. Please provide your full contact details to receive a quote with our terms and conditions of payment. Errors in the descriptions and offers are reserved!

Very high quality under-table double miter circular saw machine with manual saw blade feed – for cutting profiles and solid material made of aluminium – non-ferrous metal – plastics – wood and other soft materials Optionally available with roller conveyor and manual measuring stop with digital display. Largest saw blade diameter 620 mm Cutting Area - Examples - 90° - 130 mm x H 125 mm 90° - 80 mm x H 145 mm 45° - 100 x H 130 mm Infinitely variable miter adjustment +/- 20° Saw blade drive power 2.2 kW Dimensions approx. 0.9 x 1.2 m x H 1.6 m (with open protective cover) Weight approx. 350 kg

S131GH Metal band saw Motor: 230V 1.1kW 50Hz Feed infinitely adjustable Band saw blade speed: 22/ 31/ 55 m/min Band saw blade 1638x13x0,65 mm Cutting angle -45° to 60° Dimensions 1085 x 498 x 978mm Net weight 78kg G&STÜ-3300131

Offer 24419 Specifications: - Roll diameter 520 mm - Projection 510 mm - Max. passage height 420 mm - Table size 750 x 800 mm - Table left + right swivel 15 / 30 ° - Table height from the floor 1020 mm - Saw blade length 4120 - 4200 mm - Saw band width 20 - 25 mm - Stepless cutting speed - level 1 18 - 160 m/min - Stage 2 240 - 2280 m/min - Pneumatic connection 6 bar - Drive 400 V / 5.5 kW - Weight approx. 1100 kg - Space requirement approx. W 1200 x H 2200 x D 900 mm - with: - table feed - Saw blade welder in machine stand -Grindstone - Scissors + air pump -Lighting

Technical data: SEGA BIANCO MOD. 350 UNDOCUMENTED

YOC 1994 Saw blade diameter (mm): 400 Cutting speeds (m/min): 13/26, 10/20,15/30 Engine power (kW) 1.7 /2.6 Working range approx. 90° / 45°: 130 Working range square 90° / 45°: 120 / 110 Working range flat steel 90° / 45°: 305X 40 / 245 x 30 Working range standing 90° / 45°: 120 X 55 Dimensions LxWxH (mm): 800 x 1070 x 1780 Weight (kg): 820 Work carried out: Replaced cable to motor, cooling water pump, and limit switch in the engine room Feed cylinder newly sealed Transmission oil replaced Hydraulic tank cleaned / oil and filter replaced Limit switch in the machine room replaced Other settings made

Kölle Band Saw BSM40 - With belt sanding and welding machine Good condition, fully functional, can be viewed and tried out on site. Shipping also abroad. Sightseeing: Basically, I would like to point out that the article can be viewed and tested under power before purchase in order to rule out misunderstandings. Please ask questions before purchasing to avoid confusion. If you have any general questions or would like to make an appointment for a viewing, I can be reached at any time on the telephone number below or above. Errors in the description and prior sale excepted. VAT is shown separately on my invoices. Shipping with forwarding agent.

Cutting range round 90°, tube Ø: 95 mm Cutting area flat 90°, profile: 110 x 65 mm Cutting range approx. 45°, tube Ø: 90 mm Cutting area flat 45°, profile: 85 x 75 mm saw blade Ø: 315 mm Motor power: 1.1 / 1.8 kW Connection: 400 V Weight, approx.: 150 kg Equipment: - Saw blade Ø 315 - Vice with quick clamping - Pole-changeable motor with two speeds - Separate coolant pump with its own tank - Material stop - Roller block on the feed side -Underframe -CE

Key data: 255 mm

Special price € 9,200 instead of € 11,040 excl. VAT Thomas Super Trad 301 So Easy - Semi-Automatic Metal Band Saw - The SO EASY saw allows a complete cutting cycle without the constant presence of the operator, thanks to the hydraulic control system for lowering the saw frame - Hydraulic vise - Limit switch for adjusting the saw frame return directly above the material to be cut - Selector switch to MANUAL cutting mode with button to quickly access the material to be cut - Central control panel at the front of the machine with illuminated alarm system - Automation is controlled by a safety relay - Highly efficient hydraulic pump and low energy consumption - Practical and reliable for all cutting requirements of medium-sized ferrous materials - Large round work table "plateau" that rotates with the mitre of the saw blade, guaranteeing excellent support for the material t ...

Key data: 1 mm, 6300 mm

LHS Lagertechnik, supplier of shelving systems and general storage technology. Due to a customer's production closure, we are selling a KASTO HBA 420 band saw. In this ad, you will buy as follows: - 1 piece KASTO band saw HBA 420 - Year of construction: 1990 - Serial number: 17809 - Belt length: 6,300 mm - Band height: 41 mm - Band thickness: 1.3 mm -Conveyor - Connection voltage: 400 volts - Sale in as-is condition without guarantee and warranty - Loading with forklift, shipping and self-collection possible Sale in as-is condition without guarantee and warranty. Loading by forklift, shipping and self-collection possible.

offer 22556 Specifications: - Saw blade diameter 420 mm - Saw blade bore 30 mm - cutting length 3000 mm - smallest cutting length at 90° + 45° 335 mm - Intersection area see diagram attached - Swivel range inwards manually 90 - 22.5 ° - Tilt range inwards manually 90 - 45 ° - Saw blade speed 2800 rpm - Drive 380 V / 2 x 4000 Watt - Compressed air connection 7 bar - Air consumption per working stroke approx. 64 l - Space requirement approx. W 4500 x H 1950 x D 1600 mm - Weight approx. 1400 kg - with: - Cutting length adjustment with positioning control - Positioning control renewed approx. 2002 by WOLFF - Saw unit swivel and tilt for high and wide profiles, - as well as cut-outs

Offer 23426 Specifications: - Cutting range at 90° around 420 mm - flat 635 x 290 mm - Cutting range 45° round 360 mm - flat 420 x 300 mm - Saw blade dimensions 5200 x 32 x 1.1 mm - Stepless cutting speeds 18 to 108 m/min - Hydr. Raising + lowering the saw frame - Hydr. Material vise - Cutting pressure infinitely adjustable 0 - 10 m/min - Total drive power 400 V / 2.2 kW - Coolant device - Machine is mounted on bogie - Feed roller conveyor mot. driven 4000 mm - Discharge roller conveyor with dimension stop 6000 mm - Space requirement approx. W 2500 x H 1400 x D 1100 mm - Weight machine approx. 950 kg - Weight roller conveyors 2000 kg

Band length: min. 3200mm, max. 3400mm With welding machine

Table saw

Circular saw Manufacturer: MEP Type: Tiger 350

Description: FRIGGI Band Saw 2MF650 ACN Details: Type 2MF650 ACN Serial number 2511 Year of construction 1997

Key data: 280 mm

Ref.nr 00898 Name of the system: Used band saw Manufacturer: Bauer HS 280 GZA: For automatic sawing of small diameter ranges, universal application by the miter device, hydraulic material feed. Model HS 280 GZA Year of construction 2012 Technical data: (according to data sheet) Automatic saw design Cutting range 90° Round Diameter 280mm 90° Flat 300 x 230mm 45° Flat 220x230mm 30° Flat 130x170mm Cutting angle 0-30° Saw motor 1,100/1,400 Saw Blade 3000x27x0.9mm Belt speed 1: min 30m/min 2: max. 60m/min Coolant Pump 90W Hydraulic Pump 370W Mains connection 400V / 50-60 Hz Clamping force adjustment infinitely variable 10-40 bar Stroke length 500mm Working height / infeed height 500mm Dimensions (L x W x H) 1700 x 2100 x 1400mm Weight 1100 kg Scope of delivery / standard equipment Completely ready for connection, machine stand with chip collectio ...

For sale is a Heska ESU 9 vertical band saw, ideal for precise sawing work in metal, wood or plastic processing. The machine is characterized by a large working area, high stability and robust construction. Perfectly suited for workshops, training companies and industrial applications. Technical data: Blade length (max.): 4550 mm Blade length (min.): 4400 mm Total height: approx. 2000 mm Width (machine body): approx. 900 mm Depth (incl. table): approx. 1700 mm Saw table: Table size: approx. 600 × 660 mm Table extension right: +500 mm Dimensions: Length: 900 mm Width: 1700 mm Height: 2000 mm Condition: Used, functional Further technical details on request Delivery / Pick-up: Loading onto trucks possible Transportation can be organized on request

Machine No.: 140374 Country of origin: Italy Saw blade Ø mm: up to 350 Feed speed: infinitely variable Cutting areas: see photo of the machine shield Dimensions LxWxH mm: 900x650x1650 Weight approx. kg: 750

Country of origin: Italy Saw blade Ø mm: 425 Mitre range right: 60° Mitre range left: 90° Rotational speeds m/min: 13 + 26 Weight approx. kg: 900

Offer 25518 Technical data: - Cutting range at 90° around 310 mm - flat 520 x 310 mm - flat at 45° left 350 x 310 mm - flat at 30° left 230 x 310 mm - flat at 45° right 260 x 310 mm - Mitre adjustment left + right - Smallest material dimensions round / flat 10 / 10 x 8 mm - Smallest section length 40 mm - Mitre degree number display - Saw blade dimensions 5000 x 34 x 1.1 mm - Cutting speed infinitely variable 20 - 140 m/min - Cutting pressure infinitely adjustable 0 - 10 m/min - Hydr. Material clamping with clamping pressure regulation - Bundle tensioning device - Total drive power 400 V / 6.0 kW - Space requirement approx. W 3000 x H 1600 x D 1750 mm - Weight approx. 1900 kg - Discharge roller conveyor with positioning-controlled dimension stop - 6000 mm - 1 x feed roller conveyor 2500 mm - 3 x 1200 mm feed roller conveyo ...

Country of origin: Italy Saw blade Ø mm: 425 Weight approx. kg: 900

Country of origin: Italy Saw blade Ø mm: 425 Mitre range right: 60° Mitre range left: 90° Rotational speeds m/min: 13 + 26 Weight approx. kg: 900

Type: PSU 450 G Country of origin: Germany Saw blade Ø mm: 450 Machine No.: 525/2 Type No.: 47301H0004 Conversion m/min: 10/20 Connection voltage: 400 V / 50Hz Weight approx. kg: 1170

Key data: 430 mm, 5200 mm

Band saw machine Bauer SA 430 ZA with accessories Year of construction 2009 Serial number 09-98002 Space requirements: Dimension L 3110 mm W: 2210 mm H 2400mm Total machine weight approx. 2,500 kg Electr. Connection 400V Motor power 4 KW Coolant pump yes Hydraulic pump yes Sawing area: 430mm Saw blade dimensions 5200 x 43 x 1.3 mm Cutting speed: Infinitely variable Saw blade guide: deflection rollers and carbide jaws Material tension: hydraulic Saw frame stroke: hydr. Cutting pressure control Material feed: manual, hydr, automatic pliers Accessories: roller belt, chip conveyor, express lowering, preselection of cutting pressure and force via touchscreen on the control panel, storage for cut parts, saw blades >5 pieces, SIGMA 5200x43x1.3 mm available Ready to use.

Eisele cold circular saw LMS2 Voltage 380 V 16 A Speeds: 1700 - 3400 rpm Good condition

Eisele cold circular saw LMS 2 380 V 16 A 1700 - 3400 rpm 1 clamping jaw without locking

Eisele LMS 1 Speed 4000 rpm 380 V 16 A Untested without plug Swivel table Vice

Metal circular saw 400 V 400-450 mm saw blade D max 150 mm Square 140 mm Flat 275x70 mm Speeds 6, 12, 24, 48 rpm Cycle Supplies

Hello here we offer you a used semi-automatic metal band saw / band saw from MEBA Type : 230 GA-H Year of manufacture : ca 2007 Good condition, The machine was in a training workshop. The sale of this machine is only made to tradesmen or entrepreneurs. A visit is possible. Technical data are copied from the manufacturer, so without guarantee of 100% accuracy Automatic band saw Metal band saw Meba 230 GA-H with mitre cut. Automatic band saw Meba 230GA-NC Technical data: Manufacturer: Meba -Type:230GA-H -BJ. Approx. 2006-2007 (estimated) -with control (automatic) -with coolant pump -mitre cut possible -weight approx. 400kg -2 speed levels -high current -cutting range 230mm (see photo)

Type: Special 410 CSO Machine No.: 97213 Year of construction: 2012 Weight: 530 kg Dimensions LxWxH: 700x1400x1550 mm Band dimensions: 3010x27x0.9 mm Motor power: 0.9 – 1.6 kW Engine revolutions: 700 – 1420 rpm Cutting speed: 38-77 m/min Cutting capacity: see picture Cutting thickness: 1.2 mm Height of clamping jaws: 150 mm Length of jaws: 210 mm Height of the worktop: 950 mm Clamping force: 400 kg Accessories 3x Band saw blades: 3010 x 27 x 0.9 mm (Z 6/10)

Alternativ Saw KASTO PSB 280 U Blades dimensions: 450 mm x 40 mm x thickness 2 mm Cutting capacity in the round: 280 mm Square cutting capacity: 240 x 240 mm Rectangular cutting capacity: 280 x 160 mm Cutting capacity at 45°: 170 mm Automatic descent 2 speeds rotation Swivel jaws from 0 to 45° Jaws length : 350 mm x Height 150 mm Maxi jaws opening: 310 mm Lubricant pump Voltage: 380 V Dimensions (L x W x H): 1800 x 800 x 1300 mm Weight: approx 1 T

Inv. Num. : 7179 Type: BS 740 RS3 Producer: FELDER Created: 2021 Parameters: Machine width: 860 mm Machine length: 1100 mm Machine weight: 500 kg Cutting height: 450 mm Saw blade length: 5365 mm Equipment: Automatic workpiece feeding

Machine No.: 92380 Weight: 210kg Year of construction: 04/2011

Model: STG 230 GANC Type: SR-230 No. SR-230/070/199 Connection: 3x400V EL Box: ASTP

• Manual operation • Good properties for profile cuts • Adjustment of the cutting angle via backlash-free tapered bearings • Quick clamping device • Precise belt guide, with ball bearings and carbide inserts • Electric coolant pump Specifications • Stop: 2000 mm • Power: 400V 2.7 A • Engine: 0.8 – 1.5 HP • Cutting speed: 40 – 80 m/min. • Vise opening: 315 mm • Jaw height: 110 mm • Jaw length: 180 mm • Working height: 1080 mm • Mitre cut: 60° right • Dimensions (LxWxH): 870 x 1250 x 1900 mm • Weight: 270 kg

Key data: 350 mm, 45 °

Saw blade: ø 350 mm Saw Capacity: 110 mm Round / 100 mm Square Saw angle: 45º Left/Right Sawing speed: 18 / 36 rpm Equipped with: - Coolant system - Pneumatic clamping - Variable feed -Saw blade Country of origin: Germany Motor power: 1.8 kW Machine LxWxH: 800 x 1000 x 1850 mm Machine weight: 800 kg

Key data: 600 mm, 45 °

Semi-automatic undercounter circular sawing machine for cutting aluminum, non-ferrous metals, wood and various plastics Clean, burr-free cut edges as if polished. Saw blade diameter Ø 600 mm Saw blade drive power 3 kW Saw blade path upwards for sawing - downwards for empty stroke Mitre adjustment range infinitely variable from 10° to 170° - with grid dots at + 45° and – 45° Pneumatic saw table clamping Digital display for mitre angle Sawing range 90° - approx. 400 x H 135mm or 460 x H 100 mm Sawing range 45° - approx. 190 x H 60 mm or 120 x H 150 mm Saw blade feed speed infinitely variable by means of a handwheel. Adjustment range material stop forward and backward approx. 180 mm Automatic spray mist lubrication Compressed air requirement 6 to 8 bar Dimensions approx. 1.1 m x 1.2 m x H 1.65 m Weight approx. 310 kg

• Type: VMS 350 • Machine No.: 2934/2 • Sawing speeds: 17/34 m/min. • Mitre: up to 60° right • Stop: approx. 1000 mm • Power: 3x400V, 50Hz/5A • Dimensions (LxWxH): 700 x 700 x 1800 mm • Weight approx: 350 kg • Year of construction: 2001 • In operation since: 1.3.2002 • Accessories: stop approx. 1000 mm, saw blades and cooling water pump

Key data: 600 mm, 20 °

Semi-automatic circular sawing machine with radial cut for cutting aluminium, non-ferrous metals, wood and various plastics Clean, burr-free cut edges as if polished. Saw blade diameter Ø 600 mm Saw blade drive power 4 kW Saw blade travel forward for sawing - backward for empty stroke Mitre adjustment range infinitely variable from 20° to 125° Digital display for mitre angle Sawing range 90° - approx. 230 x H 180mm or 300 x H 120 mm Sawing range 45° - approx. 160 x H 180 mm or 210 x H 120 mm Saw blade feed speed infinitely variable by means of a handwheel. Automatic spray mist lubrication Compressed air requirement 6 to 8 bar Dimensions approx. 1.55 m x 0.96 m x H 1.65 m Weight approx. 670 kg

Semi-automatic circular sawing machine with radial cut for cutting aluminium, non-ferrous metals, wood and various plastics Clean, burr-free cut edges as if polished. Saw blade diameter Ø 600 mm Saw blade drive power 4 kW Saw blade travel forward for sawing - backward for empty stroke Mitre adjustment range infinitely variable from 20° to 125° Digital display for mitre angle Sawing range 90° - approx. 230 x H 180mm or 300 x H 120 mm Sawing range 45° - approx. 160 x H 180 mm or 210 x H 120 mm Saw blade feed speed infinitely variable by means of a handwheel. Automatic spray mist lubrication Compressed air requirement 6 to 8 bar Dimensions approx. 1.55 m x 0.96 m x H 1.65 m Weight approx. 670 kg

Semi-automatic undercounter circular sawing machine for cutting aluminum, non-ferrous metals, wood and various plastics Clean, burr-free cut edges as if polished. Saw blade diameter Ø 600 mm Saw blade drive power 3 kW Saw blade path upwards for sawing - downwards for empty stroke Mitre adjustment range infinitely variable from 10° to 170° - with grid dots at + 45° and – 45° Pneumatic saw table clamping Digital display for mitre angle Sawing range 90° - approx. 400 x H 135mm or 460 x H 100 mm Sawing range 45° - approx. 190 x H 60 mm or 120 x H 150 mm Saw blade feed speed infinitely variable by means of a handwheel. Adjustment range material stop forward and backward approx. 180 mm Automatic spray mist lubrication Compressed air requirement 6 to 8 bar Dimensions approx. 1.1 m x 1.2 m x H 1.65 m Weight approx. 310 kg

Key data: 440 mm, 120 mm

Specifications: Speeds 12.5 / 25 rpm Motor power 2.6 / 3.2 kW Hydraulic saw feed infinitely adjustable Saw blade size max. 440 mm Opening width vise approx. 250 mm Max. cutting height approx. 120 mm

Inv. Num. : 7318 Type: PSU 450 Producer: Behringer Created: 2006 Parameters: Wheel diameter: 450 mm Weight: 1150 kg Equipment: 4x Spare Disc

pole-switchable motor 1.7 / 2.2 kW Saw blade size max. 275 mm Cutting speed approx. 40 / 80 rpm Mitre infinitely variable by 90° to the left and by 90° to the right Cutting area approx. : 90° profile , square / round : 80 / 80 mm

Specifications: Speed: 2800 1/min Saw blade: ø 380 mm Motor power: 3000 W Roller conveyor, approx.: 128 mm Weight, approx.: 200 kg Dimensions (WxDxH), approx.: 1760 x 800 x 1680 mm

Offer 23402 Specifications: - Roll diameter 420 mm - Projection 400 mm - Max. passage height 325 mm - Table size 600 x 600 mm - Table tiltable left / right 10° / 45 ° - Table height from the floor approx. 1030 mm - Saw blade length 3450 - 3640 mm - Bandwidth max. 25 mm - Infinitely variable belt speed 15 - 1500 m/min - Drive 400 V / 1.5 kW - Weight approx. 500 kg - Space requirement approx. W 800 x H 1850 x D 1000 mm - With: - Saw blade welder IDEAL -Lighting

Key data: 360 mm

Specifications: Saw blade diameter or dimension 360mm Bore 50mm Mitre cuts up to 45° possible Stop with scale right 2500mm Cutting Areas 90° double T and U-profile 200 x 90 mm 45° double-T and U-profile 140 x 90 mm 90° round steel 120 mm 45° round steel 100 mm 90° square steel 110 mm Bz0turliee 45° square steel 95 mm 90° flat bar 200 x 90 mm 45° flat bar 120 x 90 mm pole-switchable motor --additional speeds by belt reversal Saw blade speeds 17/32-20/40-25/50 m/min Year of construction estimated--no nameplate available--

- technically efficient, ready to work - after full service - cutting length: 6000 mm - discs: 550 mm - E555 control - digital angle indicator - pneumatic angle adjustment 45-90 degrees - cutting according to external dimensions, without correction - cooling installation - roller feeder - vertical pneumatic clamps - automatically lowered and raised disc guards - chip extraction for each head

Saw blade Ø: 400 mm Cutting range at 90° round: 120 mm Cutting area at 90° rectangle: 200 x 80 mm Cutting area mitred at 45° rectangle: 150 x 70 mm Cutting speed: 13, 17, 26 m/min Drive motor: 380 V, 1.7/2.2/2.6 kW Space requirement: 1050 x 1000 x 1680 mm Weight: approx. 850 kg

Semi-automatic, double-sided vertical - mitre band saw Miter angle: 30°-90°-30° Material tension: hydraulic Saw bracket feed: hydraulic Lifting strap: back/hydraulic Speed: 15-100 m/min Strap dimensions: 4730 x 34 mm 45°: Round 330, Square 330, Rectangle 420x330 mm 30°: Round 240, Square 240, Rectangle 420x240 mm Angle +/- 30 (60) degrees, Saw feed hydraulic, Material tension hydraulic to the left and right of the saw blade, Stirrup guide on backlash-free and low-maintenance guide systems, Automatic adjustment of the stirrup feed stroke to the material diameter, Automatic angle positioning via Wago control with preset counter for any angle from -30 (60) to +30 (60) degrees, height adjustment of the upper belt guide hydraulic, minimum quantity spraying device (option)

Year: 2016 - technically efficient, ready to work - after full service - cutting length: 4000 mm - discs: 500 mm (feed from the rear) - pneumatic inclination of both heads: 90°, 45°, 22.5°, intermediate angles set manually - operator panel with Windows - cooling and lubrication installation for both heads - movable roller feeder - vertical and horizontal pneumatic clamps - automatic disc covers - delivery device for long elements - safety gates

Cutting diameter 220 mm Saw blade length: 2450 x 27 x 0.9 mm Colour: grey Total power requirement: 1.2 kW Saw band width: 0.9 mm Cutting speed: 35 + 70 m/min Cutting range at 90 degrees: around 220 mm Cutting range at 90 degrees: square 220 mm Cutting area at 90 degrees: flat 230 x 185 mm Cutting range at 60 degrees: square 90 x 90 mm Cutting range at 45 degrees: around 150 mm Cutting area at 45 degrees: square 150 x 210 mm Machine No. 4777230

Saw blade PEHAKA HS-820/820 lenght: 10700 width: 67