mubea sheet metal working used for sale

Sheet metal width - 170 mm, Sheet thickness 8 mm. 80 x 10 mm, flat steel Steel bar cutting stencils for round and square Knife length 170 mm. Sheet holding device Machine length 800 mm (1000 mm with moveable base) Machine height 500 mm plus 560 mm for base Machine weight 255 kg,. on mobile base

Reinforced steel scissors Round iron scissors Scissors Manufacturers Muhr and Bender Type 50N/22 and 50N/28 50N/22 intersects at 450N/mm2: Round: 22mm Square 22mm Flat: 35x10mm 50N/28 intersects at 450N/mm2: Round: 28mm Square 24mm Flat: 40x15mm Both machines new and ovp Special price

Max punching force: 1100 kN Extension: 510 mm Large support table with material flaps on the punchside Electric contact load stop for heare hydraulic holder for profile and flat steel shears with a wide range of tools ; Very good

Hand lever shears, long knife, sheet metal and round steel shears, lever shears -Mubea: sheet metal and round steel shears -Cutting insert length: 200 mm -Dimensions: 380/160/H1240 mm -Weight: 22 kg

Bearing number: 3488 Profile steel shears Manufacturer: Mubea, Type: KBLH 500 Machines NR.: 0156085927332, Year of construction: 0 Specifications: Size Printl 50 To Max punching dia 30 x 15 mm mm Stroke length 0-60 mm Number of strokes per min. 16 Extension 410 mm Flat steel 180 x 20 - 400 x 10 mm Angular steel 50 mm Round steel 55 mm Total power 7.5 kW Hydraulic. Length: 1400 mm, Height: 1800 mm, Width: 800 mm, Weight: 1800 kg

Specifications: - Hole diameter approx. 44 , 45 , 48 , 52 , 2 x 55 , 2 x 58 , 61 , 66 mm 2 x 68 , 2 x 80 , 81 , 85 mm - Long hole dimension approx. 12 x 42 , 12 x 50 , 18 x 55 mm - Stamp holder 58 mm - Stamp height 54 + 58 mm - Adapter ring for stamps - Die height 30 + 40 mm - Die outer diameter 90 + 140 mm - Adapter ring for matrices 90 - 140 mm - Weight approx. 90 kg

Combination machine Manufacturer Mubea Type KBL100 5-fold combined Flat steel shears 150x19mm Profile steel shears e.B angle iron 160x7mm or 100x12mm Bar steel shear 70mm round Hole punching Jack 16mm All information to the best of our knowledge, but without guarantee!

Large stock of punching material (dies/stamps), spare parts

Square notching tool, notching side knife, die holder, cutting tool, punching tool, punch, punching die, punching punch -Punching tool: square notching tool -Punching dimensions: 40 x 79 mm square -Dimensions: 225/145/H95 mm -Weight: 10.6 kg

Profile steel knife, shearing tool, cutting tool, separating tool, punching tool, punch, punch die, punch punch -Shearing tool for T-steel: 120 x 70 mm -Square: 25 mm -Round: 27mm -Type: 50305 -Dimension respectively: 175/140/15 mm -Weight: 5kg

Long-blade sheet metal and round steel shears -Sheet metal shears: sturdy -Material: Flat steel -Round: up to 15 mm -Square: up to 15 mm

Die holder, notching tool, punching tool, punch, punching die, punching punch, -Manufacturer: Mubea, punching tool square 95 x 95 mm -Type: Mubea 95 holder Ø 50 mm -Die: Ø 200 mm -Total dimensions: Ø 200 x 122 mm -Weight: 11.6 kg

Die holder, notching tool, punching tool, punch, punching die, punching punch, -Manufacturer: Mubea, punching tool Ø 60 mm -Type: Mubea 60 holder Ø 50 mm -Die: Ø 150 mm -Total dimensions: Ø 150 x 120 mm -Weight: 6.6 kg

Specifications Type: KBLH 700 Dimensions (LxWxH): 1850 x 680 x 2050 mm Working height: 700 mm Cutting length: 510 mm Knife length: 520 mm Max. shear cross-section: 3500 mm Stroke of the scissors, infinitely variable: 0 – 45 Max. stroke number of scissors: 11 PMG knife for: L-steel 90°+45°/ T-steel 90° Required power : 8.5 kW Weight approx.: 2950kg

Offer 23293 Specifications: - Printing capacity 300 KN - punches e.g. up to 30 mm Ø in steel 9 mm - or with special punching device up to 100 mm Ø in steel 2.5 mm - Infinitely adjustable stroke 0 to 28 mm - Stroke rate 26 to 36 1/min - Projection 610 mm - Installation height 240 mm - Drive 400 V / 4 kW - Space requirement approx. W 750 x H 1650 x D 1350 mm - Weight approx. 1300 kg - With: - Foot switch - Grain detection device, - Support table with foldable stops W 1100 x D 850mm - Sliding paths of the stops from the center of the punch - Width between Li and Re approx. 470 mm x D 510 mm

9 drawers Weight: 293 kg Dimensions LxWxH: 720x725x1000mm Included content: Listing see photo

Die holder, notching tool, punching tool, punch, punch die, punch stamp, -Manufacturer: Mubea, punching tool Ø 60 mm -Type: Mubea 60 5-12 Mount Ø 50 mm -Matrix: Ø 150 mm -Overall dimensions: Ø 150 x 120 mm -Weight: 6.7 kg

Die holder, notching tool, punching tool, punch, punching die, punching punch, -Manufacturer: Mubea, punching tool square Ø 70 mm -Type: Mubea 70 5-10 holder Ø 50 mm -Die: Ø 150 mm -Total dimensions: Ø 150 x 120 mm -Weight: 6.6 kg

Die holder, notching tool, punching tool, punch, punching die, punching punch, -Manufacturer: Mubea, punching tool square Ø 70 mm -Type: Mubea 70 2 holder Ø 50 mm -Die: Ø 150 mm -Total dimensions: Ø 150 x 120 mm -Weight: 5,9 kg

Die holder, notching tool, punching tool, punch, punching die, punching punch, -Manufacturer: Mubea, punching tool square Ø 52 mm -Type: Mubea 52 holder Ø 50 mm -Die: Ø 150 mm -Total dimensions: Ø 150 x 125 mm -Weight: 6,8 kg

Die holder, notching tool, punching tool, punch, punching die, punching punch, -Manufacturer: Mubea, punching tool square Ø 55 mm -Type: Mubea 55 holder Ø 50 mm -Die: Ø 150 mm -Total dimensions: Ø 150 x 120 mm -Weight: 6,7 kg

Max. punching force: 700 kN Projection: 510 mm Cuts on flat steel shears 500 x 18 mm Punches e.g. 30 mm diameter in 20 mm flat bars Quick-change device Assortment of tools is included in the price Weight: 3,000 kg

: 100 t diameter: 40 mm throat: 760 mm total power requirement: 8,5 kW weight: 3.600 kg Accessories / equipment: - punching table The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Die holder, notching tool, punching tool, punch, punching die, punching punch, -Manufacturer: Mubea, punching tool square Ø 90 mm -Type: Mubea 90 5-8 holder Ø 50 mm -Die: Ø 150 mm -Total dimensions: Ø 150 x 116 mm -Weight: 6.7 kg

Die holder, notching tool, punching tool, punch, punching die, punching punch, -Manufacturer: Mubea, punching tool square Ø 55 mm -Type: Mubea 55 1-4 holder Ø 50 mm -Die: Ø 150 mm -Total dimensions: Ø 150 x 120 mm -Weight: 6,7 kg

Die holder, notching tool, punching tool, punch, punch die, punch stamp, -Manufacturer: Mubea, punching tool Ø 75 mm -Type: Mubea 75 5-9 Mount Ø 50 mm -Matrix: Ø 150 mm -Overall dimensions: Ø 150 x 120 mm -Weight: 6.6 kg

Die holder, notching tool, punching tool, punch, punch die, punch stamp, punch die -Manufacturer: Mubea, die Ø 90 mm -Type: Mubea 90 Mounting Ø 50 mm -Dimensions: Ø 90 x 115 mm -Weight: 3.4 kg

Die holder, notching tool, punching tool, punch, punch die, punch stamp, punching die, rotary die -Manufacturer: Mubea, die-cutting die, round die Ø 52 mm -Type: Mubea 52 -Overall dimensions: Ø 150 x 40 mm -Weight: 4.7 kg

Offer 23294 Specifications: - Flat steel shears - knife length 470 mm - for flat material 450 x 15 mm - or 300 x 20 mm - Sectional steel shears - L- steel at 90° 140 x 13 mm - at 45° 70 x 7 mm - T-steel at 90° 70 mm - Bar steel shears - round steel 50 mm - Square steel 42 mm - Notching device - rectangular notching 52 x 90 x 12 mm - Punch punch - punching force approx. 750 KN - - Infinitely variable stroke 0 - 70 mm - Perforates in steel up to 30 mm Ø in 20 mm - Projection 310 mm - Hydraulic drive 400 V / 7.5 kW - Space requirement approx. W 1600 x H 1850 x D 1400 mm - Weight approx. 2400 kg - With: - 2 E. foot switches for two separate workstations - Slewing ring

Die holder, notching tool, punching tool, punch, punching die, punching die, punching die, round die -Manufacturer: Mubea, punching die round die Ø 75 mm -Type: Mubea 75 1 5 -Total dimensions: Ø 150 x 40 mm -Weight: 3,9 kg

Die holder, notching tool, punching tool, punch, punching die, punching punch, punching die, round die, die reduction -Manufacturer: Mubea, punching tool holder die reduction -Type: 105 - 80 mm mounts -Dimensions total: Ø 150 x 60 mm -Weight: 4.7 kg

Specifications: Weight approx. 3 to Drive power 8.5 kW Height approx. 2.1 m Width x depth approx. 2 x 0.8 m Perforated punch 700 kN, projection 510 mm, punches 30 mm in max. 20 mm Flat steel shears : 500 x 18 mm Notching device with rectangular tool up to 13 mm Sectional steel shears, L-steel, 90° mm

Punching force: 750 kN (punches e.g. 30 mm in 22 mm material), with search device via foot switch for punching Projection: 320 mm Cuts 450 x 15 mm or 300 x 20 mm on flat steel shears Support table on the punching side Two separate foot switches for the punching and shearing side, so that independent punching and shearing can be carried out Assortment of tools is included in the price

Hand punch, hand punch, eccentric punch, hand lever punch, spindle punch -Stamp holder: Ø 22 mm -Die holder: Ø 40 mm -Dimensions: 310/400/H50 mm -Weight: 26 kg

Hand lever scissors, hand tin snips, tin snips, sheet metal snips -Scissors: 180 x 4 mm -Dimensions: 800/400/H900 mm -Weight: 60 kg

for sheet thickness up to: 8 mm Flat Plate: 80 x 12 mm Square bar: 20 mm Round bar: 18 mm Weight approx.: 88 kg Dimensions: 620 x 250 x 380/880 mm high (with/without base)

Punching force: 550 kN (e.g. punches 30 m in 16 mm material), with search device via foot switch for punching Cuts 350 x 13 mm or 230 mm on the flat steel shear Projection: 305 mm Two separate footswitches for the punching and shearing side, so punching and shearing can be done independently Support table on the punching side Range of tools is included in the price

Punching force: 400 kN (holes e.g. 20 m in 15 mm steel) Cuts 150 x 10 mm on the flat steel shear Foot switch for stroke release Support table on the punching side Quick-change device Range of tools is included in the price

Max. punching force: 500 kN Projection: 610 mm Includes an assortment of stamps and dies Weight: 1700 kg

Linear rail with folding cam Height-adjustable for mounting on hole punches

Max. punching force: 700 kN Projection: 510 mm Cuts on flat steel shears 500 x 18 mm Holes e.g. 30 mm diameter in 20 mm flat bar Support table on the punching side with stops Range of tools is included in the price Weight: 3,000 kg

round bar steel: 30 mm square edge steel: 28 mm L-beam: 90 x 8 mm : 150 x 8 mm pressure: 35 t total power requirement: 2,8 kW weight of the machine ca.: 0,5 t dimensions of the machine ca.: 0,75 x 1,0 x 1,5 m Profile steel shears combined with: - Foot switch - Length cut The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

round bar steel: 33 mm square edge steel: 30 mm L-beam: 60 x 8 mm hole diameter in sheet thickness: 20 in 13 mm hole punhing press: pressure: 35 t hole punching press: throat: 320 mm hole punching press: max. length of stroke: 24 mm hole punching press: capacity (dia. x thick.): 28 x 10 mm hole punching press: capacity (dia. x thick.): 23 x 12 mm total power requirement: 1,5 kW weight of the machine ca.: 1,7 t dimensions of the machine ca.: 1,5 x 0,7 x 1,8 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

hole diameter in sheet thickness: Ø 30 in 12 mm hole diameter in sheet thickness: Ø 19 in 19 mm pressure capacity max.: 45 to weight of the machine ca.: 1.700 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width - max.: . mm plate thickness: . mm total power requirement: . kW weight of the machine ca.: . t dimensions of the machine ca.: . m Blade length 300 mm The technical data are manufacturer or operator specifications and therefore not binding for us. We reserve the right to prior sale, only our business and sales conditions apply.About usmore than 400 own machines in stockover 12000 m² storage area, crane capacity 70 tmore than 1000 articles accessories for your workshopYou want to sell machines production lines or your company, then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 170 mm plate thickness: 0 mm number of rolls: 0 weight of the machine ca.: 0,1 t Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 400 mm plate thickness: 4 mm weight of the machine ca.: 0.3 t dimensions of the machine ca.: 0.5x1x2.2 m www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

round bar steel: div mm square edge steel: div mm L-beam: div mm No. 2984: 1 used plate, profile and bar shear with notcher 50 to manufactured by PEDDINGHAUS, type 210 / 13 Standard, built 1965 No. 3418: 1 used combined section shear 80 tonnes manufactured by PEDDINGHAUS, type 210 Super 16, built ca85 Cuonnbjt0a No. 3668: 1 used steel section shear + punching machine 95 to PEDDINGHAUS, type 210 Super 20, year of construction 1978 Space requirement 2.20 x 1.00 x 2.35 m, weight approx. 4.5 tonnes No. 3286: 1 used steel profile shear 65 to MUBEA / MUHR & BENDER, type KBL 16 N No. 1096 1 used hole punch 26 to EDEL SMO 26, various accessories The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

plate thickness: 6 mm blade length: 300 mm cutting width at round material: 13 mm cutting width at rectangle material: 70 x 6 mm total power requirement: - kW weight of the machine ca.: 0,03 t dimensions of the machine ca.: 0,5 x 0,16 x 1,16 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Max. punching force: 700 kN Projection: 510 mm Cuts on flat steel shears 500 x 18 mm Holes e.g. 30 mm diameter in 20 mm flat bar Range of tools is included in the price Weight: 3,000 kg

Punching force: 400 kN (holes e.g. 20 m in 15 mm steel) Cuts 150 x 10 mm on the flat steel shear With pipe notch on the steel bar shears Foot switch for stroke release Support table on the punching side Quick-change device Range of tools is included in the price

Punching force: 500kN, throat depth: 610mm, stroke: 60mm, max. hole diameter in steel thicknesses 15mm/9mm/4.5mm: 30mm/50mm/100mm, max. material thickness: 15mm. Machine dimensions X/Y/Z: approx. 1100mm/1550mm/1750mm, weight: approx. 1650kg. An on-site inspection is possible.

Punching force: 300 kN For example, punches a 20 mm hole in 12 mm steel Stroke release via foot switch Range of tools is included in the price

sheet width - max.: 300 mm plate thickness: 8 mm flat steel: 80 x 10 mm blade length: 300 mm machine length: 860 mm machine height: 565 mm weight of the machine ca.: 172 kg Long measuring shear Machine dealer with own stock of 1600 m². The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Punching force: 350 kN (holes e.g. 23 m in 12 mm material) Cuts 150 x 10 mm on the flat steel shear Two separate footswitches for the punching and shearing side, so punching and shearing can be done independently Support table on the punching side with stop cam Range of tools is included in the price

pressure: 40 t throat: 175 mm work height max.: 1055 mm stroke: 30 mm sheet thickness - max.: 8 mm total power requirement: 4 kW weight of the machine ca.: 1020 kg dimensions: 910 x 670 x 1930 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 50 t throat: 610 mm total power requirement: 7,5 kW machine weight ab.: 1700 kg dimensions: 1500 x 650 x 1700 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

A hydraulic profile-steel/universal steel shear with integrated punching unit Muhr & Bender is available. Punching force: 500kN, punching capacity for 15mm steel: 25mm, punching stroke: 60mm, stroke rate: 47/min, throat depth: 750mm, installation height: 215mm, working height: 1150mm, flat-steel cutting capacity X/Y: 180mm/20mm. Machine dimensions X/Y/Z: approx. 1500mm/900mm/1900mm, weight: approx. 2000kg. Includes various round and slotted punches with dies. An inspection on site is possible.

round bar steel: 33 mm square edge steel: 30 mm L-beam: 60 x 8 mm hole diameter in sheet thickness: 20 in 13 mm hole punhing press: pressure: 35 t hole punching press: throat: 320 mm hole punching press: max. length of stroke: 24 mm hole punching press: capacity (dia. x thick.): 30 x 9 mm hole punching press: capacity (dia. x thick.): 20 x 13 mm total power requirement: 1,5 kW weight of the machine ca.: 1,7 t dimensions of the machine ca.: 1,5 x 0,7 x 1,8 m Profile steel shear with: - Hole punch - Notcher - Foot switch - Machine light - Mounted on a trolley The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Punching force: 1000 kN Projection: 760 mm For example, punch a 40 mm hole in 22 mm steel Stroke release via foot switch Quick-change device Range of tools is included in the price 3000 kg

Punching force: 560 kN For example, punches a 30 mm hole in 15 mm steel Stroke release via foot switch Range of tools is included in the price

pressure: 100 t throat: 620 mm stroke: 0-100 mm hole diameter in sheet thickness: 40 in 20 mm no. of strokes: 49 Hub/min Control: total power requirement: 15 kW weight of the machine ca.: 3.500 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Profile steel shears, profile shears, punch, punching machine, hole punch, hydraulic flat/profile and bar steel shears -Manufacturer: Mubea, hydraulic profile steel shears type HPSN 350 -Drive: hydraulic -Pressure force: 35 tons -Equipment: large support table with stops for punching -Punching -scissors -Cut -Notch -various punches and dies -Dimensions: 1460/1700/H1690 mm -Weight: 1080kg

Section steel shears, profile shears, punch, punching machine, hole punch -Pressure force: 29 to -Punching: -Scissors: -to cut: -not: -mechanical release: -div. Punches and dies: -Length stop: -Installation dimensions: 1300/1570/H1900 mm -Transport dimensions: 1300/770/H1900 mm -Weight: 1112 kg

Hand lever shears, long-blade sheet metal and round steel shears, lever shears -Manufacturer: Mubea, sheet metal and round steel shear type 3/5 R -Cutting insert length: 200 mm -Steel sheet: up to 8 mm -Lift-down device: -Overall dimensions: 385/160/H1280 mm -Transport dimensions: 960/160/H390 mm -Weight: 22 kg

Hand lever shears, long-blade sheet metal and round steel shears, lever shears -Manufacturer: Mubea, sheet metal and round steel shear type 3S / 6 R -Cutting insert length: 200 mm -Steel sheet: up to 6 mm -Flat/strip iron: up to 70x7 mm -Round steel: up to 13 mm -Cutting capacity: see photo of the nameplate -Lift-down device: -Overall dimensions: 385/160/H1500 mm -Transport dimensions: 1160/160/H400 mm -Weight: 24 kg

Hand lever shears, long-blade sheet metal and round steel shears, lever shears -Manufacturer: Mubea, sheet metal and round steel shear type 3/5 R -Cutting insert length: 200 mm -Steel sheet: up to 5 mm -Flat/strip iron: up to 60x6 mm -Round steel: up to 13 mm -Cutting capacity: see photo of the nameplate -Overall dimensions: 380/160/H1310 mm -Transport dimensions: 970/160/H470 mm -Weight: 23 kg

Hand lever shears, long-blade sheet metal and round steel shears, lever shears -Manufacturer: Mubea, sheet metal and round steel shears -Cutting insert length: 150 mm -Round steel: up to 12 mm -Lever arm: with safety spring -Lift-down device: -Overall dimensions: 320/120/H1260 mm -Transport dimensions: 990/120/H310 mm -Weight: 12 kg

Hand lever shears, long-blade sheet metal and round steel shears, lever shears -Manufacturer: Mubea, sheet metal and round steel shears -Cutting insert length: 200 mm -Round steel: up to approx. 20 mm -Rectangular profile: up to approx. 19x19 mm -Lever arm: with rack and pinion transmission -Overall dimensions: 455/170/H1540 mm -Transport dimensions: 1230/170/H440 mm -Weight: 49 kg

Hand lever shears, long-blade sheet metal and round steel shears, lever shears -Manufacturer: Mubea, sheet metal and round steel shears -Cutting insert length: 200 mm -Steel sheet: up to 7 mm -Flat/strip iron: up to 100x9 mm -Round steel: up to 20 mm -Rectangular profile: up to 18x18 mm -Lever arm: with rack and pinion transmission -Overall dimensions: 540/180/H1570 mm -Transport dimensions: 1250/180/H490 mm -Weight: 44 kg

Die cutter, punching machine, punching device, hole punching machine, hole punch, copy punch, stop punch, hole punch, eccentric punch, row hole punch, punching machine, punch press -Manufacturer: Mubea, punch type KL 100 with 2-axis digital display -Pressure capacity: 100 tons -Punching performance: see photo nameplate -Projection: 535 mm -Material table: 1240 x 615 mm -Travel: x= 1100 mm / y= 600 mm -Digital display: Heidenhain 2-axis digital display -Accessories: incl. see photos -Total dimensions: 2200/2020/H2110 mm -Weight: 3145 kg

Profile steel shears, profile shears, punch, punching machine, hole punch, hydraulic flat/profile and bar steel shears, punching and notching machine -Manufacturer: Mubea, profile steel shear punching and notching machine type HIW 600 -Pressure force: 60 to -Applications: punching, shearing, cutting, notching -Punching: Throat depth 260 mm -Accessories: incl. punching tool, see photos -Dimensions: 1470/960/H2140mm -Weight: 1283 kg

Punch, punching machine, punching device, hole punching machine, hole punch, copy punch, stop punch, hole punch, eccentric punch, row hole punch, punching machine, punching press -Manufacturer: Mubea, hole punch type KL 100 -Printing capacity: 100 tons -Punching capacity: see photo type plate -Thrust: 500 mm -Accessories: incl. see photos -Dimensions: 1460/880/H2100 mm -Weight: 2660 kg

Profile steel shear, profile shear, punch, punching machine, hole punch, hydraulic flat/profile and bar steel shear -Manufacturer: Mubea, hydraulic profile steel shear type HIW1000 -Drive: hydraulic -Pressure force: 100 tons -Equipment: large support table with stops for die-cutting, various stamps and dies -Production: Punching, shearing, cutting, notching -Dimensions: 2360/760/H1800 mm -Weight: 2700 kg

workpiece thickness max.:80 mm workpiece thickness min.:5 mm plate size without being adjusted:2000x1000 mm size of plate min.:100x100 mm control:CNC Mubea Matic100 hole diameter:min/max:10/40 mm workpiece weight:750 kg deburring device max.:d=40 mm traversing speed:80 m/min work height max.:1050 mm positioning accuracy:+/- 0,5 mm opening of gripping pliers min/max.:Typ I: 5/45 mm opening of gripping pliers min/max.:Typ II: 45/85 mm feed length:max. 150 mm rapid traverse::8 m/min spindle turning speed range:112-180-224-280-355-560 U/min work table::L:2500;B:950 mm arm gripping device:4 Stück tool taper:Kegel DIN 6327 longitudinal travel:x=2800 mm cross travel:y=1000 mm bore spindle stroke:max. 150 mm total power requirement:25,0 kW weight of the machine ca.:5,5 t space requirements approx. LxWxH:5,0x5,5x2,7 m plate size with beeing adjusted also 1000x4000 mm possible with roller conveyo ...

Qty. 1 Second-hand Sendzimir reversing cold rolling mill Mfc.: Waterbury Farrel Type: WZS- Reversing - Sendzimir Rolling Mill type: ZR – 23M – 31”, reversing Z”, 1 – 2 – 3 – 4 Built: 1977 Modernised in 1991 Capacity: approx. 50 000 T/annum Strip width: 370 – 740 mm Strip tension: controlled up to 10 Tons Thickness: Entry: 3.5 mm Exit: 0.20 mm Speed: 183 – 368 m/min. Min. exit thickness of material M70-A: 0.04 mm Last pass from 0.12 to 0.04 mm Qty. 1 Second-hand roll grinder Mfc.: Landis Type: L-28A Roll dia.: 40-100 mm Roll length: up to 1500 mm Qty. 15 Containers

Qty. 1 Second-hand aluminium strip production plant Entry Material: Aluminium Scrap – HD666, AA5050, 2.5-3.0% Mg Final product: Aluminium strip (can stock) Width: 220 mm Thickness: 0.15 – 1.0 mm Mfc.: De Winter, Thermcon, Fata Hunter, Fröhling, Nederman, Burghardt & Schmidt, Siemens Built: 1984, 1999, 2000, 2002, 2014, 2015 Scope of supply: Melting Furnace Tilting Casting Furnace Block Caster 5 Stand Hot Rolling Mill 6 Stand Cold Rolling Mill Hot Gas Filter Slitter Welding Machine Treatment Furnace Quenching Unit Shear

Qty. 1 Second-hand strip rolling mill Mfc.: United Engineering Type: 4-Hi Built: Strip Width: 393 mm (15.5”) Thickness Entry: 4 mm (0.16”) Exit: 1.2 mm (0.05”) Mill Speed: 405 m/min. (1330 Fpm) Strip Tension: 2670 kg (5875 Lbs) Coil ID 406 mm (16”) Coil OD 1448 mm (57”) Coil weight: 3180 kg (7000 lbs)

material width: 300 mm material thickness: 2,0 mm : max. 90° Grad weight: 12 Kg dimensions: 400 x 250 x 100 m Combined sheet metal working machine with: - Bending, tool widths 25 - 50 - 75 - 75 - 105 mm. - Rolls, roll diameter 38 mm - scissors, max. 1015 x 1mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

guillotine shears AG TS 2 Working thickness 2mm Adjustable stop Hold Length 1.80 m Width 1 m Height 1.40 m Weight 300 kg

Line Salvagnini S4 P4 Year 2001/2003 S4 30 + P4 2220 + MD with unloading robot. Working line, regular assistance performed by the manufacturer

Hydraulic Shear HACO HS 3010 Capacity: 3000 x 10 mm Back gear gauge travel: 1000 mm Year of construction: 1983 Manual adjustment of the clearance between blades Cutting angle: 1° to 3° Voltage: 380 V Dimensions (L x W x H): 4000 x 2100 x 2200 mm Weight: approx 8 T

LASER PRIMA INDUSTRIE Mod. 2D/3D DOMINO Year 2006 1500x3000 2.5 kw 22,000 working hours Visible in operation No loading and unloading

Mechanical Shear BOMBLED type 9G Capacity: 2500 mm x 4 mm Manual Back gear gauge travel: 500 mm Supplied with 2 front length stops Voltage: 380 V Dimensions (L x W x H): 4000 x 1500 x 1500 mm Weight: approx 4,5 T

Sheet metal processing system P 315 / 1991 105327 Ai P4-1812+HPT 2015 + R51 272/ 1991 S4.30 / 1998 Find more here - / Contact us at -