kodak pre press: imagesetter and CTP used for sale

original Kodak laser head lift for TH3

-Model : Thermal platesetter KODAK CREO LOTEM 800 II QUANTUM S YEAR 2009 -Totally refurbished from Kodak in 2013 -Software version 3.82.12 -Autoloader with 1 cassette of 50 plates capacity , Internal punching system -Approx 13.000 plates done , speed 19 plates per/hour -Included : RIP Creo Prinergy installed with 2 computers and monitors -Stacker Egraftech year 2013 -Plate size: max 1130x900 mms. -Resolution: up to 2540 dpi -Available immediately , complete with all accessories, in good conditions

- MCU Magnus 400 II Platesetter (3 cassettes) - ca. 62.000 plate exposures - suitable for GTO / SM 52 / SM 74 plates - for processless plates - Inline punch Bacher 425 mm - Plate Stacker ADVANT PST 26 - Shooter - without RIP

Resolution: 2400 dpi Manual plate feed line Speed 21 pl/hr. Max. plate size max. 838 x 990 mm mm plate size min. 267 x 215 mm mm

Maximum plate format 1422 x 1804 mm, incl. Automatic Pallet Loader APL 1 segment, inline punch, online processor Glunz & Jensen 165 HDX Immediately available, price ex location on request, delivery worldwide

Kodak Trndsetter Q800 with developer year 2016. Model TJ1903 developer EL125T In production X speed, 42 plates per hour software

CTP thermal plates 58000 plates hand feeding plate stacker Server Workstation TIFF shooter

Kodak Achieve T400 Platesetter Age: 2022 Max. Plate size: 838 x 990 mm Min. Plate size: 267 x 215 mm Max. image area: 827.9 x 990 mm Speed: up to 28 plates/hour Resolution: 2500 dpi 830 nm platesetter Semi automatic plate loading and unloading Harleqin Multi RIP 13.0 Dongle

KODAK Magnus VLF MTA Large Format Thermal Platesetter with MCU Multi-Cassette Unit (Four Cassettes) New TH 7 laser (May 2022) with only 1296 laser hours 2400 dpi Z-Speed Panel counter: 258861 Minimum size: 483 x 394 mm Maximum size: 1600 x 2083 mm Material flow from right to left with Prinergy TIFF Shooter Dell PowerEdge 7330 Plate development machine built in 206 Year of Make: 2006

KODAK Magnus VLF MTA Large Format Thermal Platesetter with MCU Multi-Cassette Unit (Four Cassettes) New TH 7 laser (08/2022) with only 2615 laser hours 2400 dpi Z-Speed Panel counter: 395443 Minimum size: 483 x 394 mm Maximum size: 1600 x 2083 mm Material flow from left to right with Prinergy TIFF Shooter Year of Make: 2016 New TH 7 laser (08/2022) with only 2615 laser hours

new motherboard with Part Number 503-00286A or Visible Number 637-00173A-A

Kodak Magnus 400 F with stacker, using Kodak Sonora XTRA 3 process free plates, under power in print shop. Available immediately.

Manufacturer: Kodak Model: Magnus 400 II Year of Manufacture: 2010 Type of Machine : CTP System Electrical supply: 220 V, 50 Hz, 16 A Pneumatics: 6 Bar Certifications: CE, CSA (C/US) Condition: Used, good condition, Autoloader requires service on plate suction. Machine has been idle but remains connected to power supply. Complete System Included in the Sale Multi-Cassette Unit (MCU) U/G - Fully automatic with interleaved paper feeder, 4 die-cutting heads (Heidelberg) and 3 magazine drawers Magnus 400 II S - 6-sided thermal imagesetter Conveyor for Magnus 400 II - Plate transport unit Plateslider Magnus 400 - Transfer to plate stacker Stacker 860 - Stacker for receiving the imaged printing plate Kodak Compressor for Magnus 800/400 with MCU Atlas Copco Airpower GX2FF, 230 V / 50 Hz, 240 l/min, 250 litres Agfa Azura C 95 Washout Unit - Ground drip tray included. Cleane ...

A Kodak thermal computer-to-print system with peripheral devices is available. Workflow: Prinergy EVO RTPO, laser wavelength: 830nm, imager sides: 6, cassette drawers: 3, punching heads: 4, max. plate dimensions X/Y/Z: 762mm/685mm/228mm, resolution: 3048dpi, screen ruling: 250lpi, repeat accuracy: +/-5µm, production capacity: approx. 17plates/h, max. cassette capacity: 180. System dimensions X/Y/Z: approx. 3350mm/1850mm/1850mm, weight: approx. 2000kg. Including a multi-cassette unit MCU U/G, 6-side thermal platesetter Magnus 400 II S, plate transport unit, plate stacker transfer, printing plate stacker 860, Kodak Compressor with Atlas GX2FF and washout unit with collecting tray Agfa Azura C 95. The autoloader has a suction problem with the printing plates. Documentation available. An on-site inspection is possible.

Platesize 1422 x 1804 mm, upgradable up to 1600 x 2083 mm, High-Z-Speed thermal laserhead technology, APL / 2 segments (right-eject), Inline 2 point punch units, Interface to online processor, Open workflow connectivity for direct and 3rd party 1-bit-TIFF connectivity, Under Premier fullservice maintenance contract, Available from currently plugged-in live operation - standby for worldwide shipping, Specified service bundle for dismantling and worldwide transport-ready export packaging, Available at short notice, price on request

Creo Lotem 800 II Quantum 830 nm, Thermal Manufacturer: Creo Model: Lotem 800 Year: 2006 8 page format Plate size min.: 381 x 318 mm Plate size max.: 1050 x 705 mm V speed: 22-25 plates/hour Resolution: up to 3556 dpi Approximate number of plates produced: 109950 Bacher Control 2000 Punch Installed on IBM Server Excellent condition Koadak Mercury 125 PlateProcessor/Stacker

Creo Lotem 400, year 2005 830 nm fully automatic thermal imaging plate setter model: Lotem 400 quantum head 4 page format 3 cassette MCU Minimum plate size: 381 x 318 mm Max plate size: 750 x 622 mm F speed: 16 plates/hour resolution: up to 2540 dpi approximate number of plates produced: 100950 Bacher control 2000 punch Excellent condition

Einbrenn-System Kodak TSO-850 High-Speed Thermo-System / Baking-System Kodak-TSO-850 High-Speed Thermo-System Year 2007 - Serial-No. 1369 Arbeitsbreite / Working width max. 850mm Elektrischer Anschluss / Power supply: 400V / 50Hz / 40A Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Reference Num.: 4206 Brand: Kodak Type: NexPress 2500 Construction year: 2017 Impressions: 22 mio Available: directly Status: Not in production Location: Deutschland

Reference Num.: 4205 Brand: Kodak Type: NexPress SX 3300 Construction year: 2014 Impressions: 13 mio Available: directly Status: Not in production Location: Deutschland

Printing plate development machine Kodak (G+J) T-HDX 165; cleaned and tested; Working width 1650mm; 2 brushes; suitable for negative and positive printing plates; Chiller. Plate processor Kodak (G+J) T-HDX 165; cleaned and checked; working width 1650mm; two brushes; used for negative and positive plates; Chiller.

Grafoteam PST 26/780 plate stacker; good condition; cleaned and tested; new engine; .max. Panel size 820x780mm, min.324x394mm. Plate stacker Grafoteam PST 26/780; good condition; cleaned and checked; new arm motor; max.plate size 820x780mm, min.324x394mm.

CTP-Mitsubishi - DPX 460 – Platesetter with Rip-Mate PC Year of construction: approx. 2007 incl. software and accessories incl. roll films in their original packaging For the production of ready-to-print die-cut polyester printing plates Mitsubishi SILVER DIGIPLATE Suitable for the following printing presses: For Heidelberg QM 46, GTO 46, GTO 52 For Ryobi 5xx For Roland Edelmann Practica 400x510mm For Heidelberg Speedmaster SM 52 – PM 52 2x Supply Rolls 1x integrated register punch for PM52- SM52- Autoplate

Fujitsu Luxel T-9000 CTP (Model PT-R8100) – CTP Plate Setter - Quantity: 1 - Manufacturer: Fujitsu - Type: Luxel T-9000 CTP E - Model: PT-R8100 - Application: Imaging of thermal CTP printing plates - Plate size: up to approx. 1,165 x 940 mm - Resolution: up to 2,400 dpi - Plate thickness: 0.15 – 0.30 mm - Laser technology: Thermal laser (multi-channel) - Output speed: approx. 20–30 plates/hour (depending on resolution) - Compatible with various workflow systems - Sturdy construction for prepress environments

Flexo Laser FL- Piccolo (Xeikon) – flexo CTP year 2008 fiber laser 20W – 1.25 plates/h approx. 3,000 m2 exposed rotating external drum vacuum Digital Exposable Photopolymer Flexo Plates all thickness, all brands exposable size 635 x 762 mm Resolution 2540 dpi data format separated 1 bit tiff weight 500 kg good condition

CTP System Creo Trendsetter VLF 5880; good condition; Video Die Cutter Hatchet OPU 200 VB Bj.2017; Observation Unit Mega Steel; Development machine Kodak THDX 165 Bj.2014; intermediate table; Outlet table. CTP System Creo Trendsetter VLF 5880; good condition; optical video punch Beil OPU 200 VB year 2017; control terminal Mega steel; processor Kodak THDX 165 year 2014; intermediate table; outfeed table.

Polimero A4 imager washer-dryer; good condition; cleaned and tested; Format 320x220mm; washout with magnetic plate; exposers; Dryer with 2 pull-outs. Exposure-washout-dryer unit Polimero A4; good condition; cleaned and checked; size 320x220mm; washing unit with magnet plate; exposure unit; dryer with two move outs.

Platesetter BASF EF III; good condition; cleaned and tested; Format 900x1200mm; pre- and main exposure; Post-exposure; dryer; Radiator. Exposure unit BASF EF III; good condition; cleaned and checked; size 900x1200mm; before and normal exposure; postexposure; dryer; Chiller.

Film imagesetter Linotronic 630 Post Script RIP 50 exposure format: 483x450mm (19x17.7inch) without register option 483x428mm (19x16.9inch) with register option Material width film: 280,310,340,370,400,430,460 mm Min. width and length not specified Dimensions (W x H x D) 820 x 890 x 960 mm (32.2 x 35 x 37.8 inch)

Platesetter Washer Dryer Polimero A4; good condition; cleaned and tested; Format 320x220mm; Washer with magnetic plate; Imagesetters; Dryer with 2 pull-outs. Exposure-washout-dryer unit Polimero A4; good condition; cleaned and checked; size 320x220mm; washing unit with magnet plate; exposure unit; dryer with two move outs.

Platesetter Washer Dryer Polimero A4; good condition; cleaned and tested; Format 320x220mm; Washer with magnetic plate; Imagesetters; Dryer with 2 pull-outs. Exposure-washout-dryer unit Polimero A4; good condition; cleaned and checked; size 320x220mm; washing unit with magnet plate; exposure unit; dryer with two move outs.

max. plate format 1130 x 950 mm 64 Laser Diodes 405nm Resolution 2400 dpi Platecounter 31260 Laser on time 940 hours only well-maintained available immediately delivery worldwide, Price on request

External RIP and Developer

Advantage N-SL 2010 CTP plate setter Advantage N-SL+ Plate developing machine VPP 68 +Nela fully automatic plate punching machine with video cont Find more here - / Contact us at -

CTP HEIDELBERG SUPRASETTER A 52/ A 75 ATL -Year 2009 Thermal CTP -Laser Type: Laserhead (64 diodes, 160 mW, 2540 dpi ) Gen II -Approx 78.000 plates, 3.600 hours of work -Min. Plate size: 240x240 mm -Max. Plate size: 676x760 mm -Speed: up to 17/22 plates/hour -Manual plate loading -Internal plate punch Bacher system with 2 positions -Autoloader - ATL two plate storage cassettes ( max capacity of 50 plates in A1 size ) -Automatic paper separation from plate to plate -Heidelberg Prinect Metashooter included, computer and monitor -Always under Heidelberg Italy maintenance -Available in June, in very nice conditions

BasysPrint 855 (Online System) Built 01/ 2010 2-Laser Head UV,405nm Exposed Plates 85600 Max:Plate Size 920 mm x 1,080 mm Min: Plate Size 323 mm x 450 mm Cassettes Manager 1 Cassettes With Kodak Merxury 85 PlateProcessor Server PC, 20 TFT Monitor.

Fully automatic Thermal CTP exposure Heidelberg Suprasetter A 52; good condition; suitable for thermal printing plates; Meter reading 107.00 plates; Workflow Meta RIP and ZIP 3 output; integrated Auto Top Loader; Punch 425mm Autoplate; Suction for ablative printing plates; Transfer bridge; Washout G+J C 85; Printing plate forklift Grafoteam PST 26. Full automatic thermal plate setter Heidelberg Suprasetter A 52; good condition; used for thermal printing plates; counter only 107,000 plates; workflow Meta RIP with ZIP 3; auto plate loading system; punch 425mm autoplate; debris removal system; bridge; washing unit G+J C 85; plate stacker Grafoteam PST 26.

Machine complete with PC, RIP, etc.