kieserling presses used for sale

Technical data: -Compressive force 100 t -Throat 320 mm -Wide stand below the Guide 400 mm -Table size approx. 850 x 610 mm -Discontinued diarrhea hole in the table 335 / 300 mm -thickness of the table clamping plate 90 mm -gr. Height approx. 300 mm -Plunger area 600 x 335 mm -Adjustable height of the RAM 80 mm -Stroke adjustment 10-130 mm -Emissions er hub in the RAM 32 mm -Speed continuous operation approx. 56 / min -Drive 400 V / 11 kW -Space requirement approx. B H 1900 x 2800 X 2200 mm -Weight approx. 9000 kg Starring:-UVV press backup controller PREVENTA -Hydr. + pneumatically actuated clutch -LUTEX auxiliary braking system -Central lubrication

pressure: 100 t throat: 330 mm stroke: 10-130 mm no. of strokes: 56 Hub/min ram - range of adjustment: 80 mm table surface area: 830x600 mm ram surface: 250x130 mm table height: 870 mm tool hole in ram: 50 mm weight of the machine ca.: 11 t dimensions of the machine ca.: BxTxH 2100x1900x3000 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Inv. Num. : 8585 Type: KPRW 160 Producer: Kieserling Created: 1972 Parameters: Compressive force: 160 t

Knuckle Joint Press Kieserling 2000 ton yeer

pressure: 2000 t distance between columns: - mm stroke: 140 mm strokes per minute: 15-50 H/min table surface area: 1000 x 1100 mm dimension of ram: - mm weight of tools max.: - kg Shut Height: 650 mm distance table - lower edge of ram: - mm ram adjustment: 25 mm main drive: 30 kW total power requirement: - kW weight of the machine ca.: - t dimensions of the machine ca.: - mm Production of stamped and formed parts, mechanical drive with toggle lever drive The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

From the Gütersloh site, we offer a well-preserved eccentric press Pressure 100 t Projection 330 mm Stroke 10-130 mm Stroke rate 56 stroke/min Plunger adjustment 80 mm Table surface 830x600 mm Plunger area 250x130 mm Table height 870 mm Peg hole in plunger 50 mm Machine weight approx. 11 t Space requirement approx. WxDxH 2100x1900x3000 mm

Machine type: Kieserling seven-roll straightening machine Working range: Tubes from Ø 15 mm to Ø 75 mm Rods Ø 20 mm to Ø 65 mm Direction of passage: from right to left Speed: approx. 50 m/min Make Kieserling & Albrecht Type: WRUN 1A Location: Solingen Length 2,400 mm Width 2,000 mm Height 1,900 mm Weight 4,600 kg Country of origin: Germany

Machine type: Two-roll straightening machine Working range: from Ø 4 mm to Ø 32 mm Direction: From left to right Speed: 24m/min Make Kieserling Type WRPF 20/30 Year of construction: Refurbished in 2023

Inquiry number 390223 Machine Type Kieserling Four Hammers Sharpening Machine Working range round fishing: from Ø 15 mm to Ø 115 mm / folding fishing: from Ø 20 mm to Ø 120 mm Flow direction: Automatic loading at the front Speed up to 100 mm/sec Make Kieserling / Type AVS 63 Year of construction 1981 Overhaul in 2024 Location NRW Length approx. 2,500 mm Width approx. 930 mm Height approx. 1980 mm Weight approx. 5,280 KG Country of origin: Germany Delivery time by arrangement Delivery terms ex works

Machine Type: Kieserling Nine-Roll Straightening Machine Working range rods Ø 5 mm to Ø 30 mm Flow direction: from right to left Speed approx. 40 m/min Made by Kieserling & Albrecht, type WRUW 1 Length 2,060 mm Width 1,450 mm Height 1,500 mm Weight 3,700 kg Country of origin: Germany Delivery time by arrangement Other: The machine is currently being completely overhauled by our specialist company. The pictures show a machine we have just delivered. The one offered here will be in equivalent condition at the time of delivery!

Machine Type: Kieserling Six Roll Pipe Straightening Machine Working range Ø 5 to Ø 45 mm Flow Direction Left to Right Speed 37 / 50 / 75 meters/min Make Kieserling, type VRM 35/45 Location Solingen Weight approx. 2,800 kg Country of origin: Germany Delivery time approx. 12 weeks Delivery condition ex works Other: Important: the machine is currently being overhauled by our company. The pictures show a machine we have just delivered. The one offered here will be in equivalent condition at the time of delivery!

Machine Type: Kieserling Nine-Roll Straightening Machine Working range tubes and rods Ø 5 mm to Ø 30 mm Flow direction from right to left Speed 40 m/min Make Kieserling, type WRUW 1 Location Solingen Length 1,600 mm Width 1,400 mm Height 1,600 mm Weight 3,700 kg Country of origin: Germany Delivery time approx. 4 weeks Other: The scope of supply of the machine includes the complete finishing for loading and removing the straightening material, consisting of: pre-bearing with roll-off slope, infeed channel with pusher, discharge channel with ejector, roll-off slope, collection belt trough.

Machine Type: Kieserling Seven-Roll Straightening Machine Working range tubes from Ø 15 mm to Ø 75 mm, rods Ø 20 mm to Ø 65 mm Flow direction from right to left Speed approx. 50 m/min Make Kieserling, type WRUN 1A Location Solingen Length 2,400 mm Width 2,000 mm Height 1,900 mm Weight 4,600 kg Country of origin: Germany Delivery time approx. 12 weeks Other: The machine is currently being completely overhauled by our specialist company. The pictures show a machine we have just delivered. The one offered here will be in equivalent condition at the time of delivery!

Machine Type: Kieserling Six-Roll Pipe Straightening Machine Working range Ø 5 to Ø 45 mm Flow Direction: Right to Left Speed 37 / 50 / 75 meters/min Make Kieserling, type VRM 35 Year of construction Refurbished in 2023 Location: Solingen Weight approx. 2,000 kg with substructure and drives Country of origin: Germany Delivery terms ex works

Machine type: Kieserling VRM 20 Flow Direction: Right to Left Target speed with 3-speed manual transmission, m/min 37.5 / 50 / 75 Main operation 1.5KW Make Kieserling, type VRM 20 Location: Solingen NRW Length 2,200 mm Width 500 mm Height 1,700 mm Weight approx. 600Kg Country of origin: Germany Delivery condition Ex-works Solingen, free loaded truck

Machine Type: Kieserling Six Roll Straightening Machine Working range from Ø 18 mm to Ø 100 mm Flow direction: from left to right Speed 37.5 / 50 / 75 m/min. Make Kieserling, type VRM 75 Location Solingen Length 1,970 mm Width 980 mm Height 1,900 mm Weight approx. 3,900 kg Country of origin: Germany Delivery time approx. 12 weeks Other: The machine is completely overhauled by our specialist company.

Machine Type: Kieserling Six-Roll Pipe Straightening Machine Working range Ø 3 to Ø 20 mm Flow Direction Right to Left Speed 37 / 50 / 75 meters/min Make Kieserling, type VRM 000 Weight approx. 800 kg Country of origin: Germany Delivery time approx. 8 weeks

Machine Type: Kieserling Six-Roll Straightening Machine Working range Ø 6 to Ø 60 mm Flow Direction Left to Right Speed 37 / 50 / 75 meters/min Make Kieserling, type VRM 60 Weight approx. 3,800 kg Country of origin: Germany Delivery time approx. 12 weeks

Kieserling two-roll straightener / complete line incl. testing system Working range: Rods from Ø 10 mm to Ø 80 mm Direction of passage: from left to right Speed: up to 75 m/min Make Kieserling & Albrecht Country of origin Germany It is a complete guideline and test line including handling and electrics.

Press force: 100t, throat depth: 320mm, table dimensions X/Y: 850mm/610mm, ram dimensions X/Y: 600mm/355mm, stroke range: 10mm-130mm, ram adjustment: 80mm, stroke rate: 56rpm, installation height: 300mm, machine dimensions X/Y/Z: approx. 1900mm/1900mm/3150mm, weight: approx. 9000kg. On-site inspection is possible.

bushing cut-off diameter range 8-22 mm number of dies 5 number of stations (incl. cut off) 6 cutting length 175 mm shaft length under head 6-140 mm output - pieces/min 125 press power 250 to

bushing cut-off , PKO diameter range 8-22 mm number of dies 4 number of stations (incl. cut off) 5 cutting length 175 mm shaft length under head 155 mm output - pieces/min 105 press power 250 to

pressure:400 t distance between columns:1250 mm stroke:250 fix mm no. of strokes:45 /min distance table/ram, max. stroke up, adjustment up:825 mm table surface area:1000 x 900 mm column travel -side:400 x 700 mm ram surface:1000 x 900 mm ram adjustment:100 mm capacity of ejector in table:40 t ejector stroke:160 mm power capacity:270,0 kW weight:44,0 t Dimensions (WxDxH):2,4 x 3,6 x 7,2 m height over floor:6,4 m

Force of pressure: 75 t projection: 300 mm table size: 620 x 800 mm Durchfalloch in the table: 225 x 325 mm table adjustment: 175 mm plunger surface: 180 x 475 mm slide adjustment: 80 mm stroke adjustment: 16-140 mm stroke rate: 90 / min drive motor: 380 V, 3 kW space: 1700 x 1200 x 2500 mm weight: 3300 kg

; in order

Force of pressure: 63 t table size: 610 x 800 mm throat depth: 350 mm stroke: 200 mm Electr. Supply: 380 V, 15 kW space: 1800 x 920 x 2440 mm weight: 3940 kg

Capacity: 50 ton Projection: 225 mm Stroke: 320 p/min Large table: 500 x 800 mm

Pressing force: 40 t table size: 670 x 470 mm plunger surface: 670 x 470 mm clearance between the pillars: 620/470 mm gr. Height: 740 mm Preß speed: 20 mm / s rapid traverse: 50 mm ejector force: 3T Electr. Supply: 380 V, 9.5 kW space: 2200 x 1875 x 3000 mm weight: 2400 kg

Force of pressure: 30 to piston stroke: 150 mm table width: 185 mm passage (S): 530 mm bore (F): distance of 140 mm cylinders - table (F1): distance 150 mm cylinder - table (F2): 1030 mm cylinder movable (M): 200 mm width (A): (B depth of 800 mm): 700 mm height 1 (C): 1775 mm height 2 (D): 1805 mm weight: 162 kg

Force of pressure: 50T piston stroke: 200 mm table width: 260 mm passage (S): 730 mm bore (F): distance 205 mm cylinder - table (F1): distance 75 mm cylinder - table (F2): 1050 mm cylinder movable (M): 240 mm width (A): 1040 mm depth (B): 800 mm height 1 (C): 1835 mm height 2 (D): 1880 mm weight approx.: 287 kg

Pneumatic press 2643 Assembly through pivot table outside the working area With protective cage and release only with a retracted swing table Table size: 10 cm x 10 cm

Pneumatic press with foot-tripping

FRICTION BELT FOR SCREW PRESS DIRECT FROM THE MANUFACTURER! Description: -Chrome leather friction belt for screw presses, riveted, new! -Dimensions: 530 mm i. diameter x 50 mm high x 18 mm thick ON request make we the friction belts regarding to your sizes! For all machine types like SMS Hasenclever Berrenberg, Schuler, Weingarten, Vaccari, via, Mecolpress, Osterwalder... We deliver worldwide! We confirm best service and short delivery times.

Force of pressure: 100 t projection: 350 mm table size: 690 x 840 mm Durchfalloch in the table: 160 mm table adjustment: slide area: 450 x 600 mm slide adjustment: 80 mm stroke adjustment: 8-100 mm stroke rate: 60 / min drive motor: 380 V, 5.5 kW space: 1850 x 1850 x 2650 mm weight: 6800 kg

With the universal hand punch NPR-20 can both on the front page as also Center of the punch be punched, so may here A4 sheet at any point are processed. The punch is suitable for cutting of printed materials in the Office, in the printer or in the copy shop. With a Nutmesser can A4 sheets are grooved. The NPR-20 is suitable for all cutting work, which can be with the NPR-10 through out. A countertop if necessary Additionally facilitates the stamping work

A roll punching press for stamping is available up to A3. The die is pulled under the roll.

Tech. Data Nominal press force 1000 kN at maximum stroke adjustment - commute 6.5 mm 1250 kN at maximum stroke adjustment - commute 3.5 mm Strokes with endurance 125/83/63 Hube/min Usable stroke rate 50 50 38 / min. Throat depth 320 mm, clamp 380 mm Stroke adjustment 10-120 mm, Stosselverstellung 80 mm Stosselflaeche 800 x 320 mm, recording journal 50 / 85 Tabletop table top hole, 900 x 630 mm 230 mm, Durchfalloch in the table 300 / 400 x 250 mm Drive - 7,5 / 5,5 kW Bulk 1350 x 2080 x 2780 mm, Btto 8900 kg

With the universal hole punch NPR-20 can both on the front page as also Center of the punch be punched, so may here A4 sheet at any point are processed. The punch is suitable for cutting of printed materials in the Office, in the printer or in the copy shop. With a Nutmesser can A4 sheets are grooved. The NPR-20 is suitable for all cutting work, which can be with the NPR-10 through out. A countertop if necessary Additionally facilitates the stamping work.

Pneumatic multi function press Operating pressure 6-8 bar Weight 106 kg dimensions 0.70 x 0.38 x 1.05 m Comments: Multi function punch air consumption 18 l per stroke, pneumatic punching operation via foot switch tripping

Table 1750 x 920 mm, fixed stroke 101 mm, see pictures and description,; All right

Pressure: 65 tons -Stroke: 140 mm -Table size: 720 x 600 mm -Plunger surface: 500 x 300 mm -Tappet adjustment: 80 mm -Strokes: 20-40 per min. -. Weight: 6000 kg -Dimensions (L x W x H): height 3.1 m -Clamping hole ø 60 x 80 mm More info on request

various hand spindle presses small More: Foot pendulum press Jantsch

Transfer press KRUPP PST-A 160 built in 1980. Technical data of the KRUPP PST-A 160 press: - nominal pressure: 160 tons - cutting force grade 1: 400 KN - force between stands: 1200 KN - number of working steps including cutting stage: 11 - distance between stands: 200 mm - slider stroke: 210 mm - drawing depth: 70 mm - range of jumps, infinitely adjustable: 15-75 / min. - production range of jumps with repeatability of its setting: 25-75 / min. - number of actuation movements: 15-25 / min. - a usable work resource for a jump in the range of 25-75 strokes per minute. : 20,000 J - maximum load on a single step: 500 KN - maximum load of a single step using inserts: 630 KN - maximum width of the tape: approx. 340 mm - maximum diameter of the cut: 120 mm - minimum diameter of the pattern: 30 mm - distance between stands: 2450 mm - height of tool building at the lower posi ...

FRICTION BELT DIRECT FROM THE MANUFACTURER! Description: -Chrome leather friction belt for screw press, riveted, new! -Dimensions: 530 mm i.diameter x 50 mm high x 18 mm thick ON request make we the friction belts regarding to your sizes! For all machine types like SMS Hasenclever Berrenberg, Schuler, Weingarten, Vaccari, via, Mecolpress, Osterwalder... We deliver worldwide!

Pressure capacity: 8000 kg Maximum cutting area - 200 mm2 for material strength 40 kg / mm2 Horizontal radius 200 mm Clearance between the side walls 160 mm Fixed hub 35 mm Pin hole in the Stossel 38 x 60 mm Adjustability of the Stossels 70 mm Weight of 400 kg of the Presse Operating instructions The machine is located in the new value. State, probably never in use. Control actuator Stober

Universal - NPR-55U Stanze Knee lever punch -Punching of paper, cardboard and plastics. -for simple stamping -The cutting blades can be recorded from the shaft -The cutting blades can be created also not attached just under the pressure plate. -The pictured tools are not part of the offer.

Hydraulic glue press with heating base, infinitely variable temperature setting, stuffenlose setting of the adhesive holding time, Power: 5 kW, 380 v 50 Hz; Two-hand operation.

Pneumatic pin press for printed circuit boards

Pneumatic pin press for printed circuit boards

Hand lever press to push pins in printed circuit boards

Hand spindle press to push pins in printed circuit boards 2 presses on a plate, with a dial indicator.

Manual written press for stamping of letters and numbers

Eccentric C stand press, little used C frame - eccentric press, used Type: PED 63.3 S4 manufacturer: WMW Year of construction: 1994 Pressing power / rated pressure: 63 t Sheet thickness / material thickn. 3.2 mm Table size / surface of bed: 800 x 580 mm Hole in the table / hole in table: 300 mm diameter. Stroke / stroke of slide: 8... 120 mm Number / number of strokes: 56 / 90 / min Tappet adjustment / adjustment of slide: 70 mm The maximum distance between Table and plunger / max distance between table and slide: 560 m Projection / Cap: mm Power of main motor / power of main motor: 6 kW Weight / weight: 5.5 t

PRESS FOR PRODUCTION ALUMINIUM TRAYS FOR ALIMENTARY USE COMPLETE WITH DOUBLE IMPRESSION MOULD-1100 CC. COMPOSED OF: A LUBRICATION UNIT 4-COLUMN MOLDING UNIT TOW-SCRAP CONTROL PANEL. 55 STROKES/MINUTE DEPENDING ON THE MOULDS. PASS COLUMNS FOR MOULDS UP TO 800 MM

The CNC press brake SMD PBH 110-3100-4C produced in 2006 is offered in a set with the ANTIL TWISTER F5 robot. Technical parameters : - manufacturer: SMD - type: PBH 110-3100-4C - year of production: 2006 - control: CNC CYBELEC ModEva 10 - overworked time: about 20,000 man-hours - pressure force: 110 tons - bending width: 3100 mm - maximum working speed: 10 mm / s - table width: 60 mm - table height: 960 mm - stroke: 465 mm - frame spacing: 2600 mm - throat: 410 mm - power supply: electric - 11.5 KW, 400 V three phases - oil tank capacity: 250 l - dimensions of the press: 3960 × 2045 × 3650 mm - total weight: 9500 kg Processing on a 3 m table and palletizing of finished details on 3 europallets.

Technical data Manufacturer: Otto Schröder Stroke: 160mm hand adjustable Distance between the stand: 800mm Pass: 250mm Support table: 800mm, with 4 grooves subcircle of 400mm groove dimension 25x75mm Bore: table center of 70mm Table height: 835mm Dimensions: LxWxH 110x900x2200mm

Weingarten Excenter Press

Capacity, ton 1250 Stroke, mm 500 Min number of no-load stroke: 8 /per min Slider adjustment, mm 215 Max. shut height between bolster plate and slider (stroke down, adjustment up), mm 860 Table size, mm 1600 x 1850 Slider size, mm 1300 x 1400 Table gap size, mm 1100 x 1100 Distance between columns, mm 1630 Distance between slides, mm 1580 Cushion travel, mm 200 Cushion capacity, ton 200 main motor power, kW 90 Press weight, kg 130000

PressOne P1S-5 is a press-fit machine from Finland that is powered by a ball-circuit spindle with servo motor. This gives you the best of both worlds. Power, speed and accuracy. No oil means no leakage problems, no rush of oil changes and no filtration problems. Only pure power, accuracy and speed! Specifications: P1S-5 Main press technology: ball-circuit spindle with AC servo drive Maximum pressing force: 50 kN Repeatability of the force adjustment: . . . . . . . . . . . . . . . . . Maximum opening speed: 50mm/s Approach speed: 50 mm / s Pressing speed: max 10 mm / s Extension: 470 mm Stroke length: 210 mm Faster range: M2 - M10 Servo motor: 0.6 kW Control: P1S TC12 Touchscreen 12" Tool connection: Type Haeger, 4-fold lower rotary base The maximum approach speed requires the "Fast Approach Speed" option. Control features of the P1S TC12: - Programmable pressing f ...

Table press, pneumatically operated Manufacturer K & W Beyer O.H.G Type Q10EL Power at 6 Atü 10 mkg Triggering the movement via electric valve Special price

Maximum force: 1600 tons Slider stroke length: 400 mm Unattainable-course: 12 mm Number of courses of a slider per minute: 16 Number of single turn-on: 12 The closed height: 870 mm Adjustment: 220 mm Under-forginig plate: -From left to right: 1600 mm -From front to rear: 1600 mm -Thickness: 650 mm Slider overall dimensions: 1600x1600 mm Aperture in a table: 1000x1000 mm window dimensions in cheeks: 1650x1650 mm Course of a rigid pusher in a slider: 100 mm Force of a rigid pusher in a slider ton-force: 80 Main electric motor power: 110 kW Course of pneumatic pillow: 160 mm Force of pushing out of a pneumatic pillow ton-force: 71 Hydropneumatic pillow: -Working course: 250 mm -Force of pushing out ton-force: 25 -Force of a clip ton-force: 250 Press overall dimensions: 4670x4670x8110 mm Press weight: 140 tons

Pressing force: 160 kN Impact stroke: 100 mm Mounting height: 350 mm Hole in the table: 100 mm Pushhole bore: 32 mm Stand passage: 650 mm Table size: 630 x 400 mm Hydraulic pressure: 280 bar electr. Connection: 380 V, 5.5 kW Space requirement: 1550 x 1050 x 2400 mm Weight approx.: 3 t

Pressure force 30 t, with feeder, see pictures

Ricy press with foot release

Foot pendulum press

Stroke power: 180 KN (18 tons). Adjustable speed: 100 - 600 strokes per minute. Adjustable stroke: 4 - 36 mm. In very good working condition. Feeder: BBV 60/60 Max. Strip Width: 60 mm. Max. Feeding Length: 60 mm. Max. Thickness: 2 mm. With stroke and speed counter. Programmable speed, number of strokes etc. Three working modes: manual, one stroke and automatic. Heavy Duty, for non stop production. Pneumatic clutch and brake. Machine with warranty 6 months. Machine dimensions: 600 mm x 600 mm x 1850 mm. Machine weight: approx 1.2 tons. Power consumption: 2.2 KW. Technical Air: 8 bar.

Qty. 1 Second-hand press for production of Aluminium pots and discs Mfc.: SITI Built: 2005 Renewed in by experts Duration: 3-4 months Force: 4000 Ton Production of Aluminium discs & induction & normal pots Pots height: 120 / 140 mm The press will be overhauled and revamped and sold as specified below: New Piston Grinding of cylinder New Flange Table modification New pumps New gaskets etc . New electric and electronical parts New program

Crank press ZAMECH PKRR 400A built in 1974. Technical data : - pressure: 400 tons - clearance between stands: 1020 mm - ram stroke: 315 mm - number of strokes per minute: 20 - maximum distance of the slider from the table closed: 742.5 mm - slider adjustment: 250 mm - table dimensions: 1020 x 1050 mm - main engine power: 40 kW - main engine revolutions: 1500 1 / min. - weight of the press: 40 t

Crank press HECKERT PKZ 400.1 built in 1980. Technical data : - maximum pressing force: 400 t - working path - lower position of the slider to the maximum pressing force: 21 mm - maximum drawing depth: 125 mm - pressing force using the maximum drawing depth: 160 Mp - idle speed of the slider: 18 min-1 - maximum number of switchings: 9 min-1 - ram stroke (min-max): 315 mm - slider adjustment: 200 mm - holding force of the drawing device at air pressure: 63 Mp, 5 kp / cm2 - force of the drawing device ejector at air pressure: 10 MP, 7 kp / cm2 - total weight: 38.5 t

a hydraulic single-stand drawing press Müller model CLZ.100.1.34, Y.O.M. 1994, good condition, with UVV, Siemens S7 screen control, throat gap 400 mm, installation height 800 mm, table surface 800 x 730 mm, stroke 600 mm, drawing cushion 40 to., drawing cushion stroke 200 mm.

press is after overhaul: full function complete mechanical parts, pneumatic and control system. The press has a new pneumatic clutch, the original was electromagnetic clutch as old system. Press capacity: max. 45 t Pull force: max. 45 t Counter force in pressing position: max. 17 t Stroke of the punch: 175 mm Filling height: max. 140 mm Deduction: max. 85 mm Compression distance: max. 55 mm Top pressing: max. 15 mm Stroke rate: 9 – 26 min.-1 Motor: 7,4 kW Approx: 3000x1200x1800 mm Net weight: about 5000 kg

PressOne P1S-8 is a press-fit machine from Finland that is powered by a ball-circuit spindle with servo motor. This gives you the best of both worlds. Power, speed and accuracy. No oil means no leakage problems, no rush of oil changes and no filtration problems. Only pure power, accuracy and speed! Specifications: P1S-8 Main press technology: ball-circuit spindle with AC servo drive Maximum pressing force: 80 kN Repeatability of force adjustment: ± 1% Maximum opening/approach speed: 120 mm / s Pressing speed: max 10 mm / s Extension: 620 mm Stroke length: 210 mm Faster range: M2 - M10 Servo motor: 0.6 kW Control: P1S TC12 Touchscreen 12" Tool connection: Type Haeger, 4-fold lower rotary base The maximum approach speed requires the "Fast Approach Speed" option. Control features of the P1S TC12: - Programmable pressing force - Programmable lifting opening - Progra ...

PressOne P1S-10 is a press-fit machine from Finland that is powered by a ball-circuit spindle with servo motor. This gives you the best of both worlds. Power, speed and accuracy. No oil means no leakage problems, no rush of oil changes and no filtration problems. Only pure power, accuracy and speed! Specifications: P1S-10 Main press technology: ball-circuit spindle with AC servo drive Maximum pressing force: 100 kN Repeatability of force adjustment: ± 1% Maximum opening/approach speed: 120 mm / s Pressing speed: max 10 mm / s Extension: 620 mm Stroke length: 210 mm Faster range: M2 - M10 Servo motor: 0.6 kW Control: P1S TC12 Touchscreen 12" Tool connection: Type Haeger, 4-fold lower rotary base The maximum approach speed requires the "Fast Approach Speed" option. Control features of the P1S TC12: - Programmable pressing force - Programmable lifting opening - P ...

PressOne P1S-5 is a press-fit machine from Finland that is powered by a ball-circuit spindle with servo motor. This gives you the best of both worlds. Power, speed and accuracy. No oil means no leakage problems, no rush of oil changes and no filtration problems. Only pure power, accuracy and speed! Specifications: P1S-5 Main press technology: ball-circuit spindle with AC servo drive Maximum pressing force: 50 kN Repeatability of force adjustment: ± 1% Maximum opening/approach speed: 50 mm / s Pressing speed: max 10 mm / s Extension: 470 mm Stroke length: 210 mm Faster range: M2 - M10 Servo motor: 0.6 kW Control: P1S TC12 Touchscreen 12" Tool connection: Type Haeger, 4-fold lower rotary base The maximum approach speed requires the "Fast Approach Speed" option. Control features of the P1S TC12: - Programmable pressing force - Programmable lifting opening - Program ...

Press brake edge machine edge bench press used Manufacturer: Mengele Type: C320-4B Built: 1966 last revision and repair: 2000 Location D-01587 Riesa Dimensions WxH: 6,250 x 3,650 mm Edge knife width: 6,150 mm sheet thickness at 6,000 mm bending length: approx. 7.5 mm. The machines are designed for very deep shaft bends, therefore very deep cheek recesses. Original 300 t pressing force - In 1989 the pressing force was increased to 350 t. The press is in very good condition despite its age. The machine is disassembled and ready for loading. documentation for the machine is available. Weight: about 45 t

Tool cases for press-fit machines Tool holder type Haeger (compatible) 22 press-in tools for press-fit-in contact-press-persefesters Manufacturer: PressOne - Made in Finland

For sale automatic press PTV 65 produced from SACMI Italy for ropp caps. Tools for 25mm and for 28mm ropp caps.

Furnace 1200 temperature 10 - 1200 Celsius 2 heating zones 100kW auto door PLC Poreba Gurutzpe Tacchi Geminis Tos Amutio cazeneuve Skoda Morando Niles Colchester Heyligenstaedt Kramatorsk Mondiale Safop Cazeneuve Alzmetall mas stankoimport csepel carlton kolb soraluce bergonzi flott Erfurt Weingarten smeral schuler ebu mueller zts kosice wlochy minster Stanko stankoimport glaser huta zygmunt aft donaldson eumuko Elblag Engel Demag Arburg Krauss Maffei Battenfeld Manesty Mazak Voronezh Trumpf Amada Cincinnati Netstal Rose Forgrove Illig Foremost Nissei Sandretto Fette Mazak Mori seiki Haas Okuma Gildemeister Doosan Daewoo traub hwacheon index Wema zeulenroda mueller Erfurt tox presso technik dunkes galdabini hare ponar zeulenrdoda eitel Ziel des Spannungsarmglühens ist die Reduzierung von Eigenspannungen im Material. Solche Spannungen entstehen zum Beispiel durch Gefügeum ...

closing pressure: 4360 kN table-size: 730 x 730 mm control: B+R Industrieelektronik draw back pressure: 190 kN ajustment speed: max. 60 mm/sec return speed: max. 90 mm/sec daylight between the columns: 900 mm = vulcanizing press with vertical closing unit, with form removal and form separation device The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: manuell t distance between columns: 50 mm dayligth: 50 mm total power requirement: kW weight of the machine ca.: 0,01 t dimensions of the machine ca.: 0,3 x 0,3 x 0,3 m • 4 units available, • bore at bottom, Ø 10 mm, • thread in spindle M 6, The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 100 t stroke: 300 mm Cylinder: 205 MM distance between table / ram: 520 mm table surface area: 1100X350 mm ram surface: 350X350 mm total power requirement: 7,5 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

- Pressing force: 1500 kN - Pressure: 300 Mpa - Piston stroke: 300 mm - Downward speed: 9.8 mm/s - Working speed: 2.6 mm/s - Return speed: 13 mm/s - Passage: 1550 mm - Table dimensions: 1530 x 500 mm - Table height adjustment: 750 mm / 5 steps - Stop adjustment: 400 mm - Pressure stamp Ø: 2x 150 mm - Guide piston Ø: 70 mm - Motor power: 7.5 kW - Connection voltage: 400 V - Dimensions WxHxD: 2150 x 2050 x 1000 mm + 750 x 1100 x 750 mm - Weight: 1800 kg

pressure: 100 t passage width: 1000 mm stroke: . mm width: 800 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Schuler PE4s 50/800 High Speed Press Manufacturer: Schuler Type: PE4s 50/800 High-speed press 61/21 600/3 Pressing force: 50 t Projection: 800 mm Stroke rate /min: 125-300 Plunger stroke: 40 mm Kohler unwinding reel 500.1 M We sell a large number of paternosters. The devices are in operation until 30.06.2021. After the purchase, there are also the documents for it From 01.07.21 the devices are ready for collection. Dismantling and transport by the buyer. Location is Hildesheim The dismantling, loading, as well as transport can alternatively be offered by us. In addition to about 50 paternosters, countless other machines are available. After purchase, the amount is due within 7 working days. Please also note our other offers. Have fun browsing and buying.