holz her saws wood used for sale

Key data: 45 °, 2800 mm, 1000 mm

Weight approx. 1140 kg Connected load 380V 7.5kW Scoring unit 0.75 kW manually adjustable by pneumatic connection high and lowerable Trimming length 2800 mm Speeds: 600/5000/4000/3000 rpm via V-belts Electric swivel with digital display Electric height adjustment with digital display Cutting width 1000 mm 23S9Fmzq rear support table 950 x 400 mm wide Angle stop 2500 mm with extension 2840 mm with 2 stops Suction port 120mm + 80 mm for PSV Parallelogram protection device with narrow and wide hood Edging stop

Key data: 4300 mm, 2200 mm

EXHIBITION MACHINE Cutting height 2200 x cutting length 4300 mm, cutting depth 80 mm Motor power: 5.5 kW Automatic saw feed for vertical and horizontal cut, infinitely variable from 6-25 m/min. incl. the following accessories: - Suction CE - Pneumatic aluminium sliding shelf - Medium workpiece support - Longitudinal fence with digital dimension display - Stripe stop - Digital dimension display for horizontal cutting on the control panel - 3 adjustable anchorage points in the saw bar - SuperCut scoring device incl. 2 WPL knives - Narrow parts line (2 pieces)

Key data: 5300 mm, 2100 mm

Power sawing unit 4.6 kW Cutting length 5300 mm Cutting height 2100 mm Cutting depth 80 mm Total machine height 2900 mm Strip attack Weight approx. 700 kg Saw blade Ø 300 mm Hinged rail

Key data: 4300 mm, 1925 mm

Connected load 380V 7A Cutting length 4300 mm Cutting height 1925 mm Frame height 2210 mm Machine height 2500 mm Room height 2540 mm Edging height 1870 mm Passage height 1940 mm

Key data: 5300 mm, 2200 mm

Panel Saw Holz-Her Type 1211 Machine No. 579-FD82 Cutting length maximum 5300 mm Cutting height maximum 2200 mm Cutting depth maximum 80 mm Motor power 3/4 kW Saw blade diameter 300 mm Swivelling sawing unit Slatted frame automatically evasive Free-standing installation possible Saw frame can be divided in height for transport Machine dimensions Length 6600 mm x Width 1600 mm x Height 2770 mm

Scoring unit: - kW Dimensions (L/W/H): mm machine weight ab.: 900 kg Rear feed width: mm Cutting length: 5300 mm Motor output: 4,6 kW Cutting height: 2200 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Cutting length: 4.300 mm Cutting height: 1.800 mm Motor output: kW Scoring unit: - kW Dimensions (L/W/H): mm machine weight ab.: ca. 600 kg kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

AUTOMATIC EDGE BANDING machine type HOLZ-HER SPRINT 1411 work hours : 380 work meters : 32.000 CE mark : YES volt. 380/50 composition : 1. gluing unit with cartridge and comb nozzle 2. end trimming unit 3. edge trimming unit 4. tilting edge trimming unit 5. glue scraper

Chip extraction, filter extraction, bagging filter -Drive: 0.96 kW -Speed: 2800 rpm -Connection: Ø 50 mm -Connection: 380 V -Dimensions: 780/470/H340 mm -Weight: 135 kg

Equipment: - PLC control - Edge magazine - Glue application system "Cartridge" -Printed work - Cross-cutting unit - Milling unit, for flush/chamfer/radius - Shape milling unit - Radius scraper blade Specifications: - Length: 4,445 mm - Width: 1,500 mm Working Dimensions: - Workpiece thickness: 6-45 mm - Edge thickness: 0.4-8 mm - Workpiece width: min 60 mm - Workpiece length: min. 180 mm - Feed speed: 8/16 m/min without corner copying - Extraction connection: 2 x Ø 70 mm Static vacuum 1650 Pa Min. air velocity 20 m/sec - Compressed air connection 6 bar technical data subject to actual equipment!

Top control panel Edge Feeder 1902 Glue application station 1906 Chopping shears 1902 Printed work 1816 Cross-cut unit 1918 Milling unit 1942M Rounding scraper blade 1929 Shape milling unit 1983 Wing scraper blade 1964 Buffing unit 1940 Weight approx. 970 kg Compressed air connection 6 bar Extraction connection Ø 120 mm Length approx. 5300 mm

Key data: 5 mm, 6 mm, 4425 mm

Electricity connection 400V / 11kW Extraction connection Ø 1x100 mm Compressed air connection 6 bar Weight approx. 980 kg Width min/max 760 / 1605 mm, length 4425 mm, height 1720 mm Workpiece thickness min. 6 mm, max. 45 mm Workpiece length min. 180 mm Workpiece width min. 60 mm Feed rate 13 m/min Edge thickness max. 5 mm, rolls 3 mm Edge magazine 1301 with DAZ 11 Glue station 1906 Printing unit 1914 Cross-cut unit 1976 Milling unit flush 1942 Milling unit Radius R2 1943 Ziehklinge 1927 Buffing unit 1944

Wood Her UNO 1303 + PU Edge thickness 0.4 -3 mm (6 mm) Control panel with selector switches for setting the units Fully automatic edge magazine for roll and strip goods Glue application station: cartridges + PU gluing Workpiece height 6-55 mm Printing unit pneumatic Cross-cut unit for roll and strip goods up to 3 mm (6mm) edge thickness with conversion of 0-10° bevel of the cross-cut saws Milling unit, flush milling, radius milling, chamfer milling - 15° Scraper unit for chamfers and radii Surface Scraper Unit - Finish Machine is CHECKED in TOP CONDITION from very well maintained craft business from stock Lieboch

Manufacturer: HolzHer, Type: 1444, Year: 1991, Min-max feed m/min: 10 - 20, Premilling: yes, Coil magazine: yes, Strip magazin: no, Mitre stations: yes, Bevel milling: yes, Corner tracing type: no, Top pressure belt/roller: Rolle, Year :1991

Manufacturer: Holz-Her Fräsständer, for left machine side: links, Number of motors: 2, kW-Leistung : 2,2, Drehzahlen U/min : 11600, Horizontal Rollentastung : yes, Vertical roller sensing: yes,

Manufacturer: HolzHer, Type: 1411-1, Year: 2001, Work piece width min-max mm: 60, Min.-max. workpiece length in mm: 230, Edgeband height max mm: 50, Thickness of coiled edgeband max mm: 3, Vorschub min- max m/min: 11, Glue system granulate/cartridge: Patrone, Buffing unit: yes, Machine lenght mm: ca. 4.100, Wight approx. kg: ca. 1.100, Year :2001

Manufacturer: HolzHer, Type: Sprint 1310, Year: 2006, Edgeband height max mm: 45, Thickness of coiled edgeband max mm: 3, Vorschub min- max m/min: 10, Mitre stations: yes, Glue system granulate/cartridge: Patrone, Mitre stations: yes, Radiusfräsen : yes, Buffing unit: yes, Top pressure belt/roller: rolle, Compressed air bar: 6, Machine lenght mm: 3, Year :2006

A vertical panel saw Holz-Her is available. Cutting length: 2200mm, cutting height: 30mm, number of saw blades: 3, saw blade diameter: 300mm, panel thickness: 0mm-30mm/30mm-70mm, clamping surface X/Y: 2200mm/5300mm, vertical stroke: 2200mm, horizontal stroke: 5300mm, speed: 4420rpm, machine dimensions X/Y: 6400mm/2900mm, weight: approx. 1000kg. Including 2x 3-part folding rails and 2x adjustable longitudinal stops with scales. Documentation available. On-site inspection is possible.

Wood Her STREAMER 1057 XL FU + PU Edge thickness 0.4 - 6 mm Modern control system with selector switch for setting the units Fully automatic edge magazine for roll and strip goods Glue application station GLU-JET cartridges + PU gluing Adhesive application using nozzle technology Scanning nozzle Workpiece height 6-60 mm car. Glue height adjustment High-quality 3-roll printing unit, 1st roll motorized Cross-cut unit pneum. for rolls and strips up to 6 mm edge thickness with pneumatic adjustment of 0-10° slant of the cross-cut saws Milling unit, flush milling 6 mm, radius milling - chamfer milling - 15° Corner copy unit - 3 mm edge thickness Scraper unit for chamfers and radii with 2 scraper carriers Surface Scraper Unit - Finish Buffing unit Spraying device in the inlet and outlet area as well as PU Machine with all machining tools Machine is WORKSHOP TESTED  First  ...

Holz Her Sprint 1312 FÜ + PU heavy version - edge thickness 0.4 - 12 mm PLC Screen Control Pre-milling unit for attaching in front of the glued part Fully automatic edge magazine for roll and strip goods Glue application station cartridges + PU gluing car. Tactile nozzle Workpiece height 6-55 mm Cross-cut unit for roll and strip goods up to 12 mm edge thickness with conversion of 0-10° bevel of the cross-cut saws Milling unit, flush milling 12 mm, radius milling - chamfer milling - 15° MOT - 4 axis Scraper unit for chamfers and radii with 2 pneum scraper carriers. Pneumatic engagement and disengagement Surface Scraper Unit - Finish Spraying Device - PU Machine in TOP CONDITION from stock Lieboch

Wood Her Accura 1556 Premium Fully equipped, modern edge banding machine First delivery 2021 Machine is in TOP CONDITION From stock Lieboch 

Wood Her STREAMER 1057 FU + PU Edge thickness 0.4 - 6 mm Modern control system with selector switch for setting the units Pre-milling unit for attaching in front of the glued part Fully automatic edge magazine for roll and strip goods Glue application station GLU-JET cartridges + PU gluing Adhesive application using nozzle technology Workpiece height 6-60 mm Car. Glue height adjustment High-quality 3-roll printing unit, 1st roll motorized Cross-cut unit pneum. for rolls and strips up to 6 mm edge thickness with pneumatic adjustment of 0-10° slant of the cross-cut saws Milling unit, flush milling 6 mm, radius milling - chamfer milling - 15° Corner copy unit - 3 mm edge thickness Scraper unit for chamfers and radii with 2 scraper carriers Surface Scraper Unit - Finish Spraying Device - PU Machine with all machining tools Machine is WORKSHOP TESTED in TOP CONDITION

Wood Her Auriga 1308 XL Compact design - edge thickness 0.4 - 8 mm Motorized bridge adjustment PLC Screen Control Edge Control, PPC 319W, 18.5" touchscreen monitor iTronic Adaptive Pressure and Adhesive Quantity Control and Rinsing Routine Pre-milling unit for attaching in front of the glued part Fully automatic edge magazine for roll and strip goods Glue application station GLU JET cartridges + PU gluing, with probing nozzle Workpiece height 8-60 mm Glossy package Printing unit pneumatic Pneumatic cross-cut unit for roll and strip goods up to 8 mm edge thickness with pneumatic adjustment of 0-10° bevel of the cross-cut saws Multifunction milling unit 1827 MOT4 flush milling 8 mm, radius milling – chamfer milling 15° over NC axes Shape milling unit - rounding of corners up to edge thickness 3mm, working height 12 – 60 mm, postforming possible Scraper unit 1929 MOT4, f ...

gebr. Feeder WOOD HER 1117 3 Rolls 0.55 / 0.75 kW (380V / 16A plug) 8 speeds 4 / 6 / 8 / 10 / 12 / 15 / 20 / 30 m/min. incl. 3 new wheels in the actual state. function checked. ex location  Fixed Price

Edge banding machine Type: Sprint 1317 Manufacturer: Holz-Her Year: 2006 Edge Control with 18.5" 16:9 color touch screen rotary control panel, memory for programs, motorized adjustment of the pressure beam, feed using a transport chain, feed 8–18 m/min extendable support surface for workpieces Trimming milling unit 1961, diamond cutting cutter in right- and left-hand operation, automatic adjustment to the height of the workpiece Edge feeding 1903 Pre-cutting up to 3 x 45 mm (depending on the material) Adhesive system 1905 Multi-System automatic adjustment of the glue height using the touch nozzle, Pressure regulator for adjusting cartridge pressure, the possibility of using PUR adhesives, pressure device 1913 MOT, 1. cylinder driven Trimming unit 1918 with pneumatic adjustment Pneumatic cut-off saw rotating Multifunctional unit 1824 MOT 4 with a multifunctional ...

Unit construction kit, format processing unit, cutting unit, milling unit, profile milling unit, jointing milling unit, trimming unit, double-end profiler, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -Sale: Handover in the current condition as seen -Case: slight damage, see photos -Trimming unit: for trimming the protruding edges on the front and rear edge -Adjustment range: 400 to 840 mm -Clamping: pneumatic -Motors: Holz-Her 750 W / 2600 rpm -Saw blade: Ø 160 mm -Dimensions: 1010/450 / H540 mm -Weight: 94 kg

Unit construction kit, format processing unit, cutting unit, milling unit, profile milling unit, jointing milling unit, trimming unit, double end profiler, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -Number: 1x motor -Motor type: -Power: kW -Voltage: 380 volts -Tool holder: SK40 -Spindle speed: 9000 rpm -Dimensions: 340/270/H400 mm -Weight: 35 kg

Saw unit, saw unit for panel saw, panel dividing saw, vertical panel sawing machine, vertical panel saw, -Saw unit, HOLZ-HER -Engine: H.Hug Type CEI PLF 850 -Power: 2.9 kW -Speed: 2880 rpm -Cutting height: max. 80 mm -Dimensions: see photos -Transport dimensions: 700/630/H780 mm -Weight: 60 kg

Cutting center Type: Cut 6120 Manufacturer: Holz-Her Year: 2010 Control: HOLZHER CUTCONTROL 2 Cutting length: 4400 mm Max overhang of the saw blade:82 mm Main motor: 11 kW (for discs Ø 350 mm) Independent pre-cutting motor: 2.2 kW Feed speed: continuously adjustable up to 100 m/min Dimensions: 9730 x 6450 x 1650 mm Integrated label printer Air cushion tables for easy handling of heavy plates Machine in good condition, fully functional Find more here - / Contact us at -

Edge banding machine Type: AURIGA 1308 XL Black Edition Manufacturer: Holz-Her Year: 2018 Avaílable: 7/2026 Edge thickness (rolled material): 0.4 – 3 mm Edge thickness (strip material): 0.4 – 8 mm Edge cross-section: max. 6 × 42 mm Edge height: max. 65 mm Workpiece thickness: 8 – 60 mm (with corner copying 12 – 60 mm) Workpiece width: min. 65 mm Workpiece length: min. 160 mm (without corner copying) / min. 180 mm Feed speed: 10 m/min Equipment and control: Edge Control 19 control system with 18.5” touch color display Rotating and tilting control panel at eye level Motorized adjustable pressure bridge Gluing technology – iTronic: Adaptive pressure and glue dosage control Automatic fine-tuning according to material type Optimization of edge thickness and glue type for best results Automation package includes: Glue quantity control Adaptive trimming knif ...

Edge banding machine Type: STREAMER 1057XL Manufacturer: Holz-Her Year: 2019 Max. edge thickness: 8 mm Max. part thickness: 60 mm Manual adjustment of the thickness of 0.5; 1a 2 mm abs edge PUR+EVA Fully equipped New glue application unit, new diamond cutters + spare cutters not yet ground. Machine in good condition, fully functional, under power Find more here - / Contact us at -

Wood Her Perfect 1422 K + PU Heavy version up to 20 mm edge thickness Full car. Roller magazine - Chop shears Full car. Edge magazine for striped fabric CARTRIDGES + PU gluing station Flush caps Multifunction milling unit, flush - chamfer - radius milling with mech. Digital Setting Soundproof booth CE version Machine is FUNCTIONAL TESTED in VERY GOOD CONDITION from stock Lieboch

PART NUMBER 8010 SPECIFICATIONS Equipment: - plate - Pre-milling - Tape feeder - 2 glue tanks: for granules and for cartridges - currently there is hot melt glue (granulate) in the machine - guillotine – pre-cutting of the veneer - 3 pressure rollers - 2 ball cutting units - 2 milling units for edge shaping (radial milling cutters) - corner earning aggregate - scraping aggregates – for removing excess glue - Polishing units - infinitely variable feed speed adjustment 8-18m/min - element thickness 6-45mm - min workpiece length 180mm - min workpiece width 600m - max thickness of veneer fed from the roll 3mm - air demand 6-8 bar - Diameter of the extraction port 7x80mm,1x130mm - dimensions l/w/h 6650x1260x1700mm - weight 1850kg ADVANTAGES – German production – spray system – pre-milling and corner making – 2 glue tanks - Smooth feed 8-18mm  ...

Wood Her Sprint 1329 Black Edition Heavy version - edge thickness 0.4 - 8 mm (15 mm with tool change) 18.5" touchscreen control, power PC color screen Motorized, positioning-controlled bridge height adjustment Pre-milling unit for attaching in front of the gluing station autom. Inlet ruler 1350 mm MOT Fully automatic edge magazine for roll and strip goods MOT GLU-JET Cartridge Glue Application Station - Granu + PU Gluing, Thin Film Technology Edge height max. 60 mm Glue height adjustment / tactile nozzle Printed work 1913 mot. Motor-pneumatic NC servo axis Cross-cut unit for roll and strip goods up to 15 mm edge thickness with electro-pneumatic conversion of 0-10° bevel of the cross-cut saws Multifunction milling unit MOT 6 - NC control axes: Flush milling 8 mm (15 mm) Radius milling Bevel milling 0 - 15° Copy milling unit MOT 4, corner copying, postforming corners wit ...

Edge banding machine Type: Sprint 1317 Manufacturer: Holz-Her Year: 2007 Control: HOLZ-HER EdgeControl Counter: 989875 m Maximum edge thickness: 8 mm Rolled material thickness: up to 3 mm Workpiece thickness: up to 45–60 mm Minimum workpiece length: 180 mm Minimum workpiece width: 60 mm Feed: 8–16 m/min Machine length: 5,905 mm Weight: 1700 kg Air pressure: 6–8 bar New pre-milling cutters, now changed Machine in good condition, fully functional, under power Find more here - / Contact us at -

: 0,4-5 mm Workingpiece thickness from to: 6-45 mm Total length: 4130 mm Feed speed: 11 m/min. total power requirement: kw Weight: 1250 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Wood Her Sprint 1317 Heavy version - edge thickness 0.4 - 8 mm PLC Screen Control Infeed ruler via PLC Pre-milling unit for attaching in front of the glued part Fully automatic edge magazine for roll and strip goods Glue application station cartridges + PU gluing Adhesive application using nozzle technology Workpiece height 6-50 mm Glue height adjustment Printing unit pneumatic Cross-cut unit 1918 for rolls and strips up to 8 mm edge thickness with pneumatic adjustment of 0-10° slant of the cross-cut saws Milling unit 1942 MOT2 flush milling 8 mm, radius milling - chamfer milling - 15° Scraper unit for chamfers and radii with 2 scraper carriers Shape milling unit 1832 Rounding of corners up to edge thickness 3 mm in continuous flow pneumatic engagement and disengagement Surface Scraper Unit – Finish Machine is FUNCTIONAL in GOOD CONDITION Brokerage Sales Carpentry  ...

: 0,4-3 mm Workingpiece thickness from to: 6-45 mm Total length: 3700 mm Feed speed: 8 m/min. total power requirement: kw Weight: 900 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Bos Machine (BMH) with a Sapiens Wood bosmachines We are a producer of frames, windows and doors and we sell the machine ourselves. The machine has been running in our factory from 2006 to 2022 (16 years). This is a Bos Machine (BMH) with a Sapiens in front of it. The Sapiens is a CNC machine with one robot head and one regular axis. He then proceeds to the tenoning bench (for the crosscut processing). The first shaft is a saw followed by 3 vertical shafts (approx. 500mm long) and behind them two more motors for round edges on the wood. Then he moves on to the milling. The first cutters profile the edge finish and the second cutters profile the inner profile. The first milling cutters consist of 1 milling cutter which profiles and immediately makes the wood thickness, followed by 4 milling motors and then another 5 milling motors for profiling the inner profiling. Technical status: ...

PIN cutting machine Clamping width of 240 mm beam height of 320 mm spigot strengths of Max 130 mm PIN length of 350 mm motor power 2,2 kW 380 Volt motor weight approx. 120 kg

Used creel, type I75/55 -outdated- Stock number: aga902 Passage: 750 mm Stroke: 550 mm Constructive structure: - Reinforced centre stand made of steel, stress-free cold formed - No cross beam on the incision side thanks to special Stand construction; thus easier saw attachment - Frame beams made of special steel, milled from a single piece - Profile stilts with rolling and cylindrical roller bearings and honing sleeves - Incl. clamp and stop Auto-BV Programmable cutting width adjustment with - Asymmetrical adjustment of the two saw packages (with type 71 with 4 saws, with type 75 with 5 saws per package), with synchronous adjustment of the splitting wedge knives - Control box with PLC control - Pushbutton box with TP operating terminal for convenient program input - Editing program display

OMEC TA185 crosscut saw Maximum cutting height 180mm Maximum cutting width 900mm Saw blade diameter 550mm Pneumatic material clamping Pneumatic saw passage Saw control with two buttons 7.5kw main motor 2x roller tables length 160cm each CE Certified White Paper

Used, in very good fully functional condition from company closure. Esterer gang saw with many spare parts and at least 40 new and used saw blades. The gate is in good, ready-to-use condition with minimal bearing clearance of 2-3mm incl.: Braun WE158 quick-release carriage, splitting wedge, timber transfer station Heavy-duty roller trestles and various accessories (can be viewed on site) Frame width: 710 mm Passage height: 710 mm Stroke: 500 mm

Vertical Wood Band Saw PROMAC SW-430 Throat depth: 400 mm Table size: Depth 600 mm x Width 430 mm Tilting table from 0 to 40° Blades dimensions: Length 3330 x 15 mm x thickness 0,6 mm Maxi cutting height: 200 mm Steering wheels diameter: Ø 430 mm Voltage: 380 V Motor: 1,5 kW Width: 800 mm Depth: 900 mm Height: 1900 mm Weight: approx 150 KG Year of construction: 2011 (machine in very good condition) Supplied with 2 spare blades

minimax si x 32A3 UPx Sliding table saw Trimming length 1200mm Sliding carriage 3200 x 360 mm Format cuts 3200 mm Cutting width with rip fence 1270 mm Max. cutting height +90°: 136 mm Max. cutting height +46°/-46°: 97/60 mm Motor 400V 50Hz 7kW Speed main saw blade: 4000 rpm Suction Nozzle Diameter: 120mm & 80mm Weight: 936kg G&STÜ-5508783

Band saw Hammer 4400, very good condition, 1.5 kW, approx. 110 kgPrices subject to change, errors, printing and typesetting errors excepted

Band saw Felder FB510, year 2019, very good condition, standard equipmentPrices subject to change, errors, printing and typesetting errors excepted

Band saw Metabo BS260 Swift, year 2006, very good condition, 260 watts, 230 V, 1712 mm belt length, 40 kgPrices subject to change, errors, printing and typesetting errors excepted

Mitre saw OMS INVINCIBLE OK 330 CE Maximum cutting length 3000mm Maximum cutting width 140mm Units adjustable at an angle of 45/-45° Motor power 2×1.8kw 330mm saws Pneumatic Vertical Material Clamping Net price

Mitre saw OMS INVINCIBLE OK 330 CE Maximum cutting length 3000mm Maximum cutting width 140mm Units adjustable at an angle of 45/-45° Motor power 2×1.8kw 330mm saws Pneumatic Vertical Material Clamping Net price

Well preserved complete width frame - creel system LINCK type BV. Right-wing machine. Frame width 760 mm, stroke 600 mm, passage height max. 710 mm. Complete with log feeder, creel car with auxiliary car. Splitting wedge with roller conveyor, transverse take-off and model return. Creel with new saw clamps. Countershaft and frame including 132 kW motor with belt drive 310 1/min. Various spare parts can be purchased in a package. Dismantling on your own. Dismantling can be offered completely truck loaded.

HBS 433 Band saw Motor: 1.5 KW / 400 V Cutting height: 270 mm Cutting width: 410 mm Roll diameter 430 mm Precision roller Guide Band length: 3345 mm Table inclination 10 °-+ 45 ° Weight: 130kg G & pieces 5154303

Multiple lengths saw FAS 14 with 2 circular saw units per 2.2 kW, 3 x 400 V, 50 Hz. -maximum piece length 6000 mm -maximum cutting height 120 mm -maximum Board width 500 mm -Working height 700 mm -Feed speed approx. 0.2 m / sec -Feed drive gear motor 0.55 kW / 3 x 400 V, 50 Hz Built about 1965 Weight 1600 kg Engine No. 314 Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Weibert S2 Circular sawing machines Formatschiebetisch: 1150mm Engine power: 3 KW (5.5 HP), 400V,. n = 4000 min Cutting height: 103 mm Blade: 250-315 mm swivel: 90 °-45 ° WJ 700100 Options: WJ-700101 format table 1270 mm WJ-700102 format table 1500 mm WJ-800105 before scoring unit with motor 0, 75kW WJ-400104 suction pipe with hose

Graule ZS 135N Cutting and mitre saws Motor 400 V / 2.0 kW Speed 3800 RPM Cutting length 440 mm (at 90 °) Cutting height 135 mm (at 90 °) Miter range: horizontal 45 °-90 °-25 ° Guide area: vertical 90 °-45 ° (left) Saw blade ø 350 mm Dust nozzle 100 mm Weight 100 kg

Graule ZS 170N Cutting and mitre saws Motor 400 V / 2.0 kW Speed 3500 RPM Cutting length 430 mm (at 90 °) Cutting height 170 mm (at 90 °) Miter range: horizontal 45 °-90 °-25 ° Guide area: vertical 90 °-45 ° (left) Saw blade ø 420 mm Dust nozzle 100 mm Weight 120 kg

Dear customers currently we offer you a used tape saw of the brand F. Zimmermann. Here are the technical data of the machine: Work table: 750 x 750 mm Cutting width: 775 mm Super cutting height: 640 mm Table swivel: 45/10° Roll diameter: 800 mm Power: 4 kW Speed: 1,500 rpm - with engine brake Cutting speed: 1,400 rpm Door safety switch Machine is CE compliant! Dimensions: 1,370 x 850 x 2,950 mm Weight: approx. 850 Kg Price plus VAT, which will be shown separately on the invoice. If you have any questions, please do not hesitate to contact us.

Table dimensions: 940x560mm Be hem length: 3200 mm Dimensions Formatschiebeschlitten: 360x146x3200mm Max cutting height 90 ° / 45 ° with preliminary Ritz: 138 / 98 mm Max width of the lengths left by the saw blade: 3260 mm RIP fence cutting width: 1270 mm Blade angle: 90 °-45 ° maximum blade diameter with ago Ritz: 400 mm Before Ritz saw blade diameter: Ø 120 mm Rotation speed of main saw blade: 3500/5000 min-1 speed scoring sawblade: 9200 min-1 engine power 400 V / 50 Hz / S6 - 40%: 7 kW (9,5 HP) Engine power before Ritz: 0.55 (0.75 kW) Dust extraction outlet diameter: 120 mm AbsaugstutzenØ blade guard: 60 mm M-design: with electric height adjustment and tilting the saw unit G & pieces 5504756

Dear customers currently we offer you a used tape saw with sliding table of the brand HEMA. Here are the technical data of the machine: Roll diameter: 500 mm Cutting height: 500 mm Cutting width: 1,200 mm Blade length: 5770 mm Sliding table left half of the table: 1,150 mm right half of the table: 1,200 mm Table length: 3.150 mm Sliding travel: 3,150 mm Particularities: Machine is already dismantled! New leaf guides at the top and bottom! Price plus VAT, which will be shown separately on the invoice. Shipping possible for an extra charge! If you have any questions, please do not hesitate to contact us.

4 sides trimming line

CONVEYOR BELT CONVEYOR BELT, FEED DIRECT FROM THE MANUFACTURER! BELTech GmbH in Lüdenscheid manufactures all dimensions and qualities according to your specifications. Premium quality for agriculture and industry. -Stable conveyor belt / conveyor belt for many applications in industry, agriculture, wood u.v.m. with textile plies, coated on one side, underside of fabric! -New, endless welded, 2-ply reinforced, with Central wedge guide rail on the underside, grooved profile 8 mm x 12 mm wide! -Dimensions: 7480 mm x 300 mm width x thickness mm 2 with 26 piece PVC T studs 30 mm high x 240 mm long (edge distance 30 mm each), obliquely set, -Band will be shipped with UPS! On request we can cut the belt conveyors / conveyor belts to your individual measurements. (All lengths and widths possible) Additional versions, with pimples, Stollen or structured surfaces available. Not is your de ...

Dimension of sliding table- 1600x375mm Gross cut capacity- 1500mm Width of cut between saw blade and rip fence - 1140mm Saw blade diameter - 400mm Height of cut (90°) - 115mm Height of cut (45°)- 105mm Speed of main saw spindle - 4500/6000rpm Main spindle diameter - 30mm Tilting saw blade - 0-45º Saws lifting, up and down, electrical control. Main motor - 5,5 kW Scoring saw blade diameter - 120mm Speed of scoring saw blade - 7000-8000rpm Scoring saw diameter - 20mm Scoring motor - 1,1 kW Weight: 650 kg Transport dimensions - 1800x1000x1200mm Using the blade 400mm, the smaller should be removed. Reduced saw blade should be used with not more than 350 mm main shield.

Dear customers currently we offer you a used tape saw of the brand HEMA. Here are the technical data of the machine: Table: 800 x 750 mm Cutting width: 680 mm Super cutting height: 480 mm Roll diameter: 700 mm Saw blade length: 5,000 - 5,150 mm Power: 3 kW Speed: 1,400 rpm Precision table swivel device with handwheel and rack Engine brake Dimensions: 1,290 x 800 x 2,300 mm Weight: approx. 580 Kg Price plus VAT, which will be shown separately on the invoice. Shipping possible for an extra charge! If you have any questions, please do not hesitate to contact us.

Band saw Kirchner Roll á 800 mm Cutting height 300 mm L x W x H: 130 x 80 x 230 cm Weight approx. 750 kg Built in 1944 The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Dear customers currently we offer you a used tape saw with sliding table of the brand HEMA. Here are the technical data of the machine: Roll diameter: 700mm Cutting height: 650mm Cutting width: 680mm Cutting width between stop and saw blade: approx. 630mm Power: 3 kW Sliding table that can be moved on both sides left half of the table: 650mm right half of the table: 1.400mm Table length: 1.800mm Sliding travel: 1.500mm Particularities: Infinitely variable speed control for cutting speeds and automatic table feed are unfortunately not possible due to the lack of PLC control unit. However, the saw can be used completely manually. Price plus VAT, which will be shown separately on the invoice. Shipping possible for an extra charge! If you have any questions, please do not hesitate to contact us.

Dear customers currently we offer you a used tape saw of the brand HEMA. Here are the technical data of the machine: Table: 1,275 x 895 mm Cutting width: 780 mm Super cutting height: 640 mm Roll diameter: 800 mm Saw blade length: 6,000 mm Power: 4 kW Speed: 1,650 rpm Precision table swivel device with handwheel and rack Engine brake Dimensions: 1,500 x 950 x 2,700 mm Weight: approx. 720 Kg Price plus VAT, which will be shown separately on the invoice. Shipping possible for an extra charge! If you have any questions, please do not hesitate to contact us.

Dear customers currently we offer you a used and very massive tape saw of the brand Bäuerle. Here are some technical data of the machine: Work table: 1,000 x 820 mm Cutting width: 765 mm Super cutting height: 520 mm Table swivel: 45° Roll diameter: 800 mm Power: 3 kW Speed: 1,400 rpm Dimensions: 1,500 x 820 x 2,500 mm Weight: approx. 900 kg All information without guarantee! VAT will be shown separately on the invoice. Shipping possible against surcharge. No guarantee and/or warranty on used machinery and accessories. If you have any questions, please do not hesitate to contact us.

Dear customers currently we offer you a used tape saw of the brand HEMA. Here are the technical data of the machine: Table: 540 x 600 mm Cutting width: 480 mm Super cutting height: 385 mm Roll diameter: 500 mm Saw blade length: 4,080 mm Power: 2.2 kW Speed: 2,800 rpm with engine brake Dimensions: 810 x 945 x 1,970 mm Weight: approx. 210 Kg Price plus VAT, which will be shown separately on the invoice. Shipping possible for an extra charge! If you have any questions, please do not hesitate to contact us.

Pendulum saws Bacus for wall mounting Saw á 500 mm Built in 1982 L x W x H: 70 x 60 x 100 cm Weight 370 kg The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Saw mill vertical Boegli Weight 4000 kg L x W x H: 200 x 160 x 330 cm Roll diameter 1250 mm Stem á 1.2 m, with mechanical clamping cars 9 m Chuck Wagon L x W x H: 900 x 200 x 170 cm Weight approx. 6000 kg Built 1952 The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Best price 4500 Eur (EXW Jonava, Lithuania) Dimension of sliding table- 3200x375mm Gross cut capacity- 3200mm Width of cut between saw blade and rip fence - 1250mm Saw blade diameter - 400mm Height of cut (90°) - 125 mm Height of cut (45°) - 115 mm Speed of main saw spindle - 4500/6000rpm Main spindle diameter - 30mm Tilting saw blade - 0-45º Saws lifting, up and down, electrical control. Main motor - 5,5 Kw Scoring saw blade diameter - 120mm Speed of scoring saw blade - 7000-8000rpm Scoring saw diameter - 20mm Scoring motor - 1,1 kW Transport dimensions - 3200x1000x1100mm Weight - 850 Kg

Best price 4150 Eur (EXW Jonava, Lithuania) Buying this machine, dust exhausting system HOLZMANN ABS 3880 only 320 Eur (EXW Jonava, Lithuania) or HOLZMANN ABS 2480 only 250 Eur (EXW Jonava, Lithuania) Dimension of sliding table- 2800x375mm Gross cut capacity- 2800mm Width of cut between saw blade and rip fence - 1140mm Saw blade diameter - 400mm Height of cut (90°) - 125mm Height of cut (45°) - 115mm Speed of main saw spindle - 4500/6000rpm Main spindle diameter - 30mm Tilting saw blade - 0-45º Main motor - 5,5 Kw Saws lifting, up and down, electrical control. Scoring saw blade diameter - 120mm Speed of scoring saw blade - 7000-8000rpm Scoring saw diameter - 20mm Scoring motor - 1,1 kW Transport dimensions - 2800x1000x1100mm Weight - 800 Kg

Best price 4600 Eur (EXW Jonava, Lithuania) Buying this machine, dust exhausting system HOLZMANN ABS 3880 only 320 Eur (EXW Jonava, Lithuania) or HOLZMANN ABS 2480 only 250 Eur (EXW Jonava, Lithuania) Dimension of sliding table- 3800x375mm Gross cut capacity- 3800mm Width of cut between saw blade and rip fence - 1140mm Saw blade diameter - 400mm Height of cut (90°) - 125 mm Height of cut (45°) - 115mm Speed of main saw spindle - 4500/6000rpm Main spindle diameter - 30mm Tilting saw blade - 0-45º Main motor - 5,5 Kw Saws lifting, up and down, electrical control. Scoring saw blade diameter - 120mm Speed of scoring saw blade - 7000-8000rpm Scoring saw diameter - 20mm Scoring motor - 1,1 kW Transport dimensions - 3800x1000x1100mm Weight - 820 Kg

Working diameter: 1600 mm 4 electric clamping

AUTOMATIC CUTTING SAW machine for solid wood model OMEC TA 185 second hand machine working conditions : Excellent CE mark : YES Instruction Book : YES with rollers tracks ( as in photo ) n.03 pneumatic stop with blade diam.mm.550 motor power Hp 7,5 volt. 380/50

Dimension of sliding table- 2200x375mm Gross cut capacity- 1500mm Width of cut between saw blade and rip fence - 1140mm Saw blade diameter - 400mm Height of cut (90°) - 115mm Height of cut (45°)- 105mm Speed of main saw spindle - 4500/6000rpm Main spindle diameter - 30mm Tilting saw blade - 0-45º Saws lifting, up and down, electrical control. Main motor - 5,5 kW Scoring saw blade diameter - 120mm Speed of scoring saw blade - 7000-8000rpm Scoring saw diameter - 20mm Scoring motor - 1,1 kW Weight: 700 kg Using the blade 400mm, the smaller should be removed. Reduced saw blade should be used with not more than 350 mm main shield.

Weibert S2 Format circular saw new Formatschiebetisch: 1600mm Engine power: 3 KW (5.5 HP), 400V,. n = 4000 min Cutting height: 103 mm Blade: 250 â 315 mm swivel: 90 °-45 ° WJ 700100 Options: Format table 1270 mm WJ-700101 Before scoring unit with motor 0, 75kW WJ 800105 Suction pipe with hose WJ 400104

Dear customers currently we offer you a used tape saw of the brand F. Zimmermann. Here are the technical data of the machine: Work table: 1,150 x 750 mm Cutting width: 775 mm Super cutting height: 640 mm Table swivel: 45/10° Roll diameter: 800 mm Power: 4 kW Speed: 1,500 rpm - with engine brake - motorized table and guide adjustment -Digital Cutting speed: 1,400 rpm Dimensions: 1,370 x 850 x 2,950 mm Weight: approx. 850 Kg Price plus VAT, which will be shown separately on the invoice. If you have any questions, please do not hesitate to contact us.

WK 700 Z classic Tilting circular saws Tilting saws/firewood saw PTO Performance: Tractor approximately 12KW - 16 HP Speed: 1450 RPM with the carbide saw blade 700 / 30 mm with longitudinal stop Depth of cut: D = ca. 250 mm with drive systems Weight: ca. 120 kg G & BGU-90157 Accessories: G & BGU-91272 wood retaining claw G & BGU-95060 PTO PTO standard 102

Dear customers currently we offer you a used tape saw of the brand HEMA. Here are the technical data of the machine: Cutting width: 865 mm Super cutting height: 700 mm Roll diameter: 900 mm Saw blade length: 6,550 mm Power: 5.5 kW with engine brake with CE incl. blade guide for particularly wide band saw blades! Dimensions: 1,630 x 1,080 x 2,825 mm Weight: approx. 950 Kg Price plus VAT, which will be shown separately on the invoice. Shipping possible for an extra charge! If you have any questions, please do not hesitate to contact us.

Band saw Hunziker Roll ø 800 mm 3.5 HP engine Built 1952 Weight approx. 730 kg L x W x H: 120 x 100 x 230 cm The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12