hitachi seiki lathes used for sale

Axis control, electronic handwheel, control unit -The electronic handwheel was removed from a CNC machining center make: Hitachi Seiki type: HC400. Other spare parts available. -electronic handwheel for Hitachi Seiki type: HC400 -Dimensions: 170/120/H80 mm -Weight: 0.6 kg

Gantry type grinding machine Make: Hiatachi Seiki Modell: 9GA-NRAA Table: 2500 x 1200 mm Max. Table travel: 2000 mm Capacity: 1500 x 900 x 500 mm Control: Fanuc 15 MA Year: 1995

x-travel:560 mm y-travel:450 mm z-travel:450 mm table surface area:760 x 410 mm turning speed range:8.000 U/min total power requirement:20 kW Vertical Processing Centre

turning diameter: 254 mm turning length: 600 mm control: Seicos total power requirement: 15 kW weight of the machine ca.: 5,6 t dimensions of the machine ca.: 2,5 x 1,3 x 1,87 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 450 mm turning length: 380 mm control: FANUC The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 600 mm y-travel: 580 mm z-travel: 580 mm control: SEICOS 16M B-axis (table): 360 x 1° mm feed X/Y/Z/-axis: 1 - 50.000 mm/min rapid traverse X/Y/Z: 50,00 m/min turning speed range - stepless: 35 - 12.000 Nm spindle drive: 22,00 kW max. torque on the spindle: 236 tool taper: BT40 toolpiece magazine: chain magazine: 61 Stück size of pallet: 2x 400x400 mm max. workpiece diameter: 630 mm workpiece height max.: 680 mm workpiece weight max.: 400 kg total power requirement: 30,00 kW weight of the machine ca.: 12,00 t dimensions of the machine ca.: 4,00 x 3,50 x H3,00 m With SEICOS S16M control unit, coolant system, chip conveyor, electron. handwheel, dust exhauster. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 1000 mm, 510 mm, 450 mm

CNC control SEICOS (Sigma) 18M, speed range 120-12000 rpm, 22 / 18.5 KW Tool holder SK 40, tool magazine with 30 places, IKZ mt 15 bar, HSC machine package for precise milling at high feed speed Dimensions: Width x depth x height 2900 x 2400 x 2786 mm, weight approx. 8200 kg Please note: The machine is not usable, tool clamping of the SK 40 mount is defective. Tool changer can therefore not change.

Inv. Num. : 8891 Type: HT 20 RIII Producer: Hitachi Seiki Generated: 2000 Parameters: Maximum turning length: 304.8 mm Max. turning diameter: 203.2 mm Maximum turning diameter over bed: 450 mm Maximum spindle speed: 5000 1/min Travel X: 400 mm Travel distances Z: 600 mm Number of tool positions: 12 Length: 2730 mm Width: 1930 mm Height: 1400 mm Weight: 4600 kg Equipment: Grasshopper Technical documentation Tool Holder Mayfran Chip Conveyor Hainbuch clamping

Tool changer chain, chain magazine, tool changing system, tool magazine -The tool changer comes from CNC machining center make: Hitachi Seiki type: HC400 -Tool changer for: Hitachi Seiki type HC400, other spare parts available. -complete with: gripper arm and drive -Tool changing positions: 80 -Intake: SK40 -Dimensions: 2270/630/H1725 mm -Weight: 860 kg

turning diameter: 450 mm turning length: 380 mm control: Seicos 40L Multi max. machining diameter: 340 mm Bar feed: 51 mm turning speed range - spindle: 30 ~ 5.000 U/min drive capacity - spindle motor: 11 / 7,5 kW spindle nose: A2-6 spindle bore: 59 mm bearing diameter: 100 mm travel -x axis: 215 mm travel -z axis: 400 mm turret (x-stations): 16 feed: 0,001 ~ 500 mm/min rapid traverse: X/Z: 30 m/min Shank diameter: 25 x 25 mm Drill shank diameter: 40 mm tail stock: taper of center: MK 5 tailstock adjustment: 300 mm total power requirement: 23 kVA weight of the machine ca.: 4,6 t dimensions of the machine ca.: 5,5 x 2,8 x 2,2 m Documents: Chip conveyor: Tailstock: Signal-Light: Parts removal: tool setter: work light: tool holders: (Revolver / Turret) CNC Lathe HITACHI SEIKI - HiTec-Turn HT 20 RIII The data for this ad was created with ModulMWS - the software solution of LogoTech ...

turning diameter: 320 mm turning length: 1100 mm control: Fanuc total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

A defective spare parts donor of a Hitachi Seiki lathe including an IEMCA bar feeder is available. 1) CNC lathe Hitachi Seiki GT 20 S II, travel X/Z: 200mm/400mm, max. turning diameter: 210mm, max. swing diameter over bed: 380mm, max. bar diameter: 51mm, spindle bore: 59mm, speed: 5000rpm, tool stations: 10, rapid traverse: 20m/min. Machine dimensions X/Y/Z: approx. 2350mm/1950mm/1850mm, weight: approx. 4100kg. The capacitors for the power connection are defective. 2) Hydraulic bar feeder IEMCA TAL/AUTO 65/32, max. bar diameter: 65mm, max. bar length: 3200mm, machine dimensions X/Y/Z: approx. 4200mm/800mm/1200mm, weight: approx. 800kg. The lathe is sold exclusively as a defective spare parts donor. An on-site inspection is possible.

x-travel:600 mm y-travel:580 mm z-travel:580 mm numbers of pallets:2 pallet size::400 x 400 mm max. workpiece weight:400 kg spindle taper ISO:40 spindle speeds::35 - 12000 feed speeds:1 - 50000 mm/min rapid speed:50 m/min total power requirement:25 kW weight of the machine ca.:12 t dimensions of the machine ca.:3,6 x 3,6 x 2,9 m with CNC SEICOS 16 M ( FANUC base ) autom. toolchanger 61-pockets pallet indexing 1° chip conveyor and coolant attachment exhauster clamping cube and diverse toolholders

The Hot Strip Mill at JFE Steel’s Keihin district stands as a testament to cutting-edge steel production technology, boasting the capability to manufacture Japan's widest hot-rolled steel strip. Commissioned in 1979, the mill has been continually upgraded throughout the years to maintain its competitive edge. Production ceased in September 2023, leaving behind a legacy of excellence. It features a Pair Cross Shift Mill for adaptive roll gap control to optimize thickness and shape. A key enhancement was the integration of a Sizing Press in 2009, which allows for variable strip widths while using slabs of constant width. This not only increases the productivity of the slab caster and reheating furnace upstream but also expands the range of products that can be manufactured efficiently. Capable of rolling slabs measuring up to 2,300 mm in width, with thicknesses ranging from 160 t ...

HITACHI WIRE EDM MACHINE MODEL MS 250 H-CUT 8Q X-AXIS STROKE: 1030 MM Y-AXIS STROKE: 810 MM Z-AXIS STROKE: 530 MM

Key data: 250 mm, 400 mm, 210 mm

Inv. Num. : 2399 Type: 254Y/FF3 Producer: HITACHI Created: 2004 Parameters: Max. travel length of the X-axis: 250 mm Max. travel length of the Y-axis: 400 mm Max. travel length of the Z-axis: 210 mm Feed length in the U-axis ( -): -100 mm Feed length in the V-axis ( -): -100 mm Rapid traverse X/Y/Z: 1500 mm/min Max. workpiece dimensions: 600x400x210 mm Max. workpiece weight: 400 kg

Key data: 410 mm, 260 mm, 210 mm

Inv. Num. : 6039 Type: 254Y Producer: Hitachi Created: 2004 Parameters: Control System: MARK-10W Feed length X-axis: 410 mm Feed length axis Y: 260 mm Feed length axis Z: 210 mm Axle U: 200 mm Axis V: 200 mm Wire diameter: 0.25 mm Max. workpiece dimensions: 680 x 520 x 210 mm Max. workpiece weight: 410 kg

Inv. Num. : 7688 Type: 203 F2 Producer: HITACHI Generated: 2000 Parameters: Control System: MARK-10W Max. travel length of the X-axis: 320 mm Max. travel length of the Y-axis: 250 mm Max. travel length of the Z-axis: 170 mm Feed length in U-axis (-): 20 mm Feed length in the V-axis ( -): 20 mm Maximum wire thickness: 0.25 mm Dielectric container capacity: 160 l Max. workpiece dimensions: 450 x 350 x 170 mm Max. workpiece weight: 200 kg Machine height: 1880 mm Machine length: 1525 mm Machine width: 1810 mm Machine weight: 1500 kg

The Continuous Galvanizing Line No. 3, built in 1983 by NKK-Hitachi, offers a production capacity of 300,000 tons per year, processing low carbon steel coils with widths ranging from 610 to 1,300 mm and thicknesses of 0.27 to 2.3 mm. The line operated until March 2019. This left-hand line includes advanced features such as a high-capacity furnace, air knife wiping system, and a skin pass mill for superior surface quality. The line's equipment is designed for maximum coil weights of 45,500 kg and speeds up to 200 mpm. Its robust configuration, including multiple bridle rolls, deflector rolls, and chemical treatment tanks, ensures efficient galvanizing. The line's modern furnace output reaches up to 50 tons per hour, making it a high-performance solution for large-scale steel galvanizing operations. Make: NKK-HITACHI Year of manufacture: 1983 Mothballed since: Ceased producti ...

Originally commissioned in the 1980s, the Tandem Cold Mill at JFE Steel's Keihin plant undegone a significant modernization in 2007 to meet high standards. Upgraded with a state-of-the-art pickling line and carrousel tension reel, the 5-stand PLTCM integrates advanced technologies from industry leaders Mitsubishi, Hitachi, and IHI, enhancing the system’s reliability, productivity, and quality control. Make: MITSUBISHI-HITACHI-IHI Year of manufacture: 2007 (integrated to TCM from 1980s) Mothballed since: Ceased production in March 2019 Production capacity: 1,200,000 tons per year Rolling direction: Right to left (right hand line) Processed material: Low carbon steel Strip width: 600 – 1,350 mm Strip thickness: 1.8 - 4.5 mm entry 0.12 – 1.6 mm exit Coil weight: max. 32,000 kg entry max. 45,000 kg exit Line speed: 250 mpm PL section  ...

CNC CONTROL: MSD 501 II, FANUC FEATURES: DIAMETER ADMITTED ON THE BED, MM 680 MAXIMUM TURNING DIAMETER 440 MM N1 MAXIMUM TREATMENT DIAMETER N2 322 MM MAXIMUM TURNING LENGTH, MM 471 THE STANDARD MACHINING DIAMETER MM170 MAIN SPINDLE: STEP PANEL 45 MM COUNTER SPINDLE: HOLE PITCH LINE 43 MM TURRET 1: POSITION N12 ALL MOTORIZED TOWER 2: POSITION N12 ALL MOTORIZED

MAchine is in good working condition.

For sale Mori Seiki CNC lathe type DL-15 in good condition. Equipped with 2 x 12 positions turret and left and right spindle. Maximum speed 6,000 rpm of both spindles. Fanuc MSC-516 control. Chip conveyors and bar feeders. Still in good condition and still under power, subject to prior sale

Description WE OFFER AN HIGH TECH CNC LATHE TURNING AND MILLING CENTRE MACHINE IS COMMING OUT FROM FORMULA 1 - MERCEDES WORKSHOP MACHINE WAS FROM NEW HIGEST POSSIBLLE MAINTAINED WITH OFFICAL MORI SEIKI TECHNICAL DATA: Mori Seiki MT2000 CNC Lathe Description: Swing over bed - 700mm, Distance between centres - 1080mm, Max turning dia meter - 550mm, Max turning length - 1020mm, Bar capacity - 65mm, X Travel - 565mm, Y Travel - +/-80mm, Z Travel - 1077mm, B Indexing - +/-120deg, X Travel Turret 2 - 155mm, Z Travel Turret 2 - 1067mm, Spindle Speed - 4500rpm, Spindle nose - JIS A2-6, Tool Spindle Speed - 6000rpm, Tool Spindle type - Capto C6, ATC - 40 Tools, Max tool length - 280mm, Max tool weight - 7kg, Turret 2 Tools - 12, Square shank - 25mm, Boring bar shank diameter - 40mm, ...

X-AXIS STROKE: 840 MM Y-AXIS STROKE: 860 MM Z-AXIS STROKE: 840 MM TABLE SIZE: 630 X 630 MM TABLE CAPACITY: 1,200 KG SPINDLE POWER: 30/25 KW ROTATION SPEED: 12,000 RPM ATTACHMENT: BT 50 NASOMANDRINO/PALLET DISTANCE: 50-810 MM SPINDLE-PLANK DISTANCE: 150-990 MM TOOL WAREHOUSE: 120 STATIONS MAX. WORKPIECE HEIGHT: 1000 MM CONTROL: MSG-502 YEAR OF BUILD: 2002

COURSE AXIS X: 840 MM COURSE ASSE Y: 860 MM COURSE ASSE Z: 840 MM TAVOLA SIZE: 630 X 630 MM TABLE RANGE: 1,200 KG TABLE INDEX: 1ST MANDRINO POWER: 30/25 KW ROTATION SPEED: 12,000 GIRI/MIN ATTACK: BT 50 NASOMANDRINO/PALLET: 50-810 MM MANDRINO - TAVOLA: 150-990 MM TOOL WAREHOUSE: 120 STATIONS MAXIMUM HEIGHT OF THE PIECE: 1000 MM CONTROL: MSG-502 BUILT: 2002

COURSE AXIS X: 840 MM COURSE ASSE Y: 860 MM COURSE ASSE Z: 840 MM TAVOLA SIZE: 630 X 630 MM TABLE RANGE: 1,200 KG TABLE INDEX: 1ST MANDRINO POWER: 30/25 KW ROTATION SPEED: 12,000 GIRI/MIN ATTACK: BT 50 NASOMANDRINO/PALLET: 50-810 MM MANDRINO - TAVOLA: 150-990 MM TOOL WAREHOUSE: 120 STATIONS MAXIMUM HEIGHT OF THE PIECE: 1000 MM CONTROL: MSG-502 BUILT: 2002

YEAR: 08/2004 LONGITUDINAL CORSA: X 800 MM TRANSVERSE COURSE: Y 700 MM VERTICAL COURSE: Z 700 MM ASSE B INDEXED 1st PALLET (2) 500X500 MM CNC MAPPS MSG-501 TOOL WAREHOUSES 60 LOCATIONS ATTACK MANDRINO BT40 MANDRINO MASSIMA VELOCITY 12000 RPM POWER OF MANDRINO'S POWER 26 KW

Code 71164 Description Universal Hydraulic Cylindrical Grinder Make SHIGIYA SEIKI Model GU – 27.100 H Serial No. 10222 Year 1978 Grinding length, max. 1000 mm Grinding diameter, max. 265 mm Centre height 135 mm Max. Weight workpiece 130 kg Table tilting angle - 3° till + 7° Table speeds 0,05 – 7 m/min Diam. Grinding wheel 350 mm Width Grinding wheel, max. 25 – 50 mm Motorpower grindingwheel 3,7 kW Speeds workpieceholder steples from 17 – 250 rpm Total power 9,3 kVA 380 Volts Machine size L x W x H 4,0 x 1,8 x 1,6 meter Weight 3200 kg Accessories Coolant, books, electric cabinet,etc. Condition Machine is in good condition

MORI SEIKI SH-500/40 Horizontal Machining Center was built in Japan in 1999 by MORI SEIKI CO., LTD. The machine is equipped with a numerical control type MORI SEIKI MSC-502. The milling machine has a table size of 500 x 500 mm and processes workpieces weighing up to 500 kg. The travel range of its X, Y, Z axes is 630 x 600 x 650 mm, respectively. The machine spindle rotates at 12,000 revolutions per minute. The milling machine is equipped with a magazine for forty tools with a maximum tool diameter of 150 mm, length 360 mm and a weight of 12 kg. The milling center is offered at a price with different types of holders. Technical parameters of the MORI SEIKI SH-500/40 CNC milling machine - CNC control: MORI SEIKI MSC-502 Travel range: - X axis (table travel length): 630 mm - Y axis (vertical movement of the spindle head): 600 mm - Z axis (cross table movement): 650 mm - distan ...

4 pcs. rope pulleys for counter weight of a FB 225 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

MORI SEIKI SH-400 Horizontal Machining Center was manufactured in 2000 in Japan by Mori Seiki CO., LTD. The CNC milling machine is equipped with Mori Seiki MSC-501 numerical control. The price of the machine includes various types of frames. Technical data of the MORI SEIKI SH-400 CNC milling machine - CNC control: MORI SEIKI MSC-501 - machine weight: 10100 kg

MORI SEIKI NT6600 CNC INTEGRATED MILL TURN CENTER WITH LIVE MILLING MAXIMUM SWING OVER BED: 42" MAXIMUM WORK PIECE DIAMETER: 42" MAXIMUM WORK PIECE LENGTH: 239" MAXIMUM BAR DIAMETER: 6.4" SPINDLE BORE: 7" X AXIS TRAVEL: 41" Y AXIS TRAVEL: 26" Z AXIS TRAVEL: 242" B AXIS: +/- 120 DEG. MAIN SPINDLE SPEED: 1500 RPM MAIN SPINDLE MOTOR: 40 HP MILLING SPINDLE SPEED: 8000 RPM MILLING SPINDLE MOTOR: 40 HP ELECTRICS: 220V/3P/60Hz/216A OAD (APPROXIMATE): 490" X 182" X 169" HIGH WEIGHT (APPROXIMATE): 120,560 LBS. EQUIPPED WITH: C AXIS YAXIS B AXIS LIVE TOOLING/MILLING 20" CHUCK FS-31iA5 CNC CONTROL 140 POSITION AUTOMATIC TOOL CHANGER PROGRAMMABLE TAILSTOCK COOLANT THROUGH SPINDLE (HIGH PRESSURE) CHIP CONVEYOR Additional Control Options: Automatic Power Shut-Off MAPPS 4 System Part Program Storage: 8mb Stored Programs: 1000 Remote Communication Function ATA Flash M ...

Mori Seiki ZT 1500YB in operation, can be viewed during operation. 2002 yes Mori CL 2000 can be viewed under power. Currently not in operation 2004 yes Mori Seiki SL-204 can be viewed under power. Currently not in operation 2001 yes Mori Seiki SL-204 can be viewed under power. Currently not in operation 2003 yes Tsugami NP-32 can be viewed under power. Currently not in operation 1992 yes Riello in operation, can be viewed during operation. 2002 yes Muratec MW 120 GT 2012

Mori Seiki ZT 1500YB in operation, can be viewed during operation. 2002 yes Mori CL 2000 can be viewed under power. Currently not in operation 2004 yes Mori Seiki SL-204 can be viewed under power. Currently not in operation 2001 yes Mori Seiki SL-204 can be viewed under power. Currently not in operation 2003 yes

x-travel:800 mm y-travel:460 mm z-travel:510 mm total power requirement:20 kW weight of the machine ca.:8 t Vertical Processing Centre 20kW is the nominal value. The spindle only needs 7.5kW. It looks like 15kW will be enough.

turning diameter: max. 320 mm turning length: 810 mm control: MSX 701 MAPPS III standard turning dia.: 200 mm Main spindle:: Number of revolutions: max. 6.000 min/-1 power capacity - main spindel: 22 / 18,5 kW Bar feed: max. 52 mm spindle bore: 61 mm C-Axis: 0,001 ° Subspindel:: Number of revolutions: max. 6.000 min/-1 power capacity - Sub spindle: 22 / 18,5 kW Bar feed: max. 52 mm spindle bore: 61 mm C-Axis: 0,001 ° Turret 1 + 3:: number of toolpositions: je 16 pos. Number of driven toolspositions: je 16 pos. Spindle speed - driven tools: max. 6.000 min -1 power capacity - driven tools: 7,5 / 5,5 kW Y - Axis: 110 (+65 / -45) mm Turret 2:: number of toolpositions: 16 pos. Number of driven toolspositions: 16 pos. Spindle speed - driven tools: max. 6.000 min -1 power capacity - driven tools: 7,5 / 5,5 kW Y - Axis: 110 (+45 / -65) mm axis stroke:: x-travel: 1-3: 210 mm y-travel: 1-3: ...

MORI SEIKI MV 65-50 Year 1986 - STROKES (mm) X = 1270 Y = 650 Z = 650 -FANUC 11M CNC control -Tool holder -30 tool warehouse

WE OFFER AN LOW HOURS ARES SEIKI COMPLETED WIITH TOOLINGS POWER ON 39010 H OPERATING HOURS: 3436 H WORKING HOURS: 4519 H DESCRIPTION: Ares Seiki R Series R4530 CNC High Performance/ High Speed Production Center DIRECT DRIVE SPINDLE - HIGH SPEED 3 AXES RAPID TRAVERSE HIGH RESPONSE SERVO SYSTEM TECHNICAL INFO: X : 450 mm Y : 300 mm Z: 300 mm RPM12,000 RPM ATC12 TaperBT30 Dimensions1200mm x 2230mm x 2480mm WEIGHT : 2200 KG MACHINE WILL BE AWAILIBLE TO LOAD IN NEXT WEEKS

Key data: 1400 mm, 1200 mm, 1350 mm

A horizontal machining center from the manufacturer Mori Seiki NH 8000 DCG is offered here. The machine is in good condition and can be visited. Make: Mori Seiki Huzvdlw Type: NH 8000 DCG Year of Make: 2008 Control: Fanuc MSX-701III Specifications: Travel: X-axis 1400 mm Y-axis 1200 mm Z-axis 1350 mm B-axis rotary table 360x0.001° automaton. Tool changer with 60 tool positions Tool holder HSK 100 2-fold pallet changing system Pallet dimensions 800 mm x 800 mm max. tool length 800 mm max. tool weight 30 kg Spindle power 37 KW Max. spindle speed 8000rpm. IKZ cooling system

MSX-850 Controller Max. turning diameter: 386 mm Max. bar passage: 52 mm Travel X/Y/Z/B: 260/100/590/624 mm Main spindle max. speed: 6,000 rpm Sub-spindle max. speed: 6,000 rpm Beghs3a 12-speed tool turret 12 driven stations 5.5 kW, max. speed: 6,000 rpm Automatic Parts Catcher Conveyor

DMG MORI SEIKI DMC 635 V Ecoline CNC machining center was built in 2013. The machine, designed for precision machining of workpieces, is distinguished by its extremely stable construction made of high-quality cast iron, which perfectly dampens any vibrations and oscillations. To achieve the highest precision and accuracy, reliable components in the form of cutting tools and a high-speed spindle are used in the machining process. Tools are changed in a very short time, so that the overall milling time is significantly reduced. The DMG DMC 635 V ECO CNC vertical machining center is offered with a modern touchscreen control panel and integrated chip conveyor. To this date, the machine has only worked for 9069 hours. The DMC 635 V ECOLINE milling center weighs 3900 kg. Technical specifications of the CNC milling machine DMC 635 V ECO - number of axes: 3 (X,Y,Z) - feed in the X/Y/Z ax ...

turning diameter: 390 mm turning length: 507 mm control: MSG 806 MAPPS max. turning diameter: 390 mm greates pass round over bed: 680 mm Swing dia. over traverse guideway: 510 mm centre distance: 618 mm Main spindle:: turning speed range - main spindle: 45 - 4.500 min/-1 power capacity - main spindel: 11 / 7,5 kW spindle bearing diameter: 110 mm spindle bore: 73 mm max. bar capacity: 51 mm spindle nose: JIS A2-6 chucking diameter: 210 mm C-Axis: 0,001 ° axis stroke:: x-axis: 235 (195+40) mm z-axis: 520 mm turret:: number of toolpositions: 12 pos. Number of driven toolspositions: 12 pos. Spindle speed - driven tool stations: max. 3.000 min -1 power capacity driven tool-stations: 5,9 / 4,5 kW Shank height for square tool: 25 mm Drill shank diameter: max. 50 mm turret change time: 0,2 sec. Tailstock:: tailstock adjustment: 490 mm dia. of quill: 85 mm taper of center: MT 4 quill stroke: ...

CNC controller: Fanuc FS31IA5 (MAPPS 4) Capacity Turning length mm: 800 Max. turning diameter mm: ø Ø430 Turn-mill spindle X-axis travel mm: 455 Y-axis travel mm: ±105 Z-axis travel mm: 800 B-axis degree: ±120 (0.001º) Speed spindle rpm: 12.000 Drive power kW: 9/5.5 Tool magazine Magazine places: 76 Tool holder: Capto C5 Tool length max. mm: 250 Tool diameter max. mm: 70/130 Tool weight max kg: 5 Lower turret X-axis travel mm: 160 Z-axis travel mm: 730 Number of tool slots St .: 10 Main spindle Speed spindle rpm: 6.000 Drive power spindle kW: 11/7.5 Spindle bore mm: 73 Chuck type: Hollow Chuck (8") Manufacturer: KITAGAWA Counter spindle Speed spindle rpm: 6.000 Drive power spindle kW: 7.5/5.5 Chuck type: Solid Chuck (8") Manufacturer: KITAGAWA Equipment Chip conveyor Signal lamp High pressure pump Chuck foot switch (double) for main and counter sp ...

CNC Machining Center Manufacturer: MORI SEIKI Type: Partner M300 A-1 Year of Make: 1990 Control: FANUC O-M Travels: X/Y/Z: 400 x 300 x 495 mm Distance between spindle center and pallet table (Y-axis) 25 – 325 mm Distance between spindle nose and pallet table (Z-axis) 125 – 620 mm Rapid traverse movement: 24 m/min Feed movement up to 5 m/min Spindle: Ball screw: 36 mm diameter Feed Actuators FANUC AC X/Y-Axis Model 5 Z-Axis Model 10 Main spindle revolutions: 100 – 6000 rpm Main spindle motor: AC 5.5 kW Main spindle taper: BT 40 Pallet: Pallet size: 315 x 315 mm Pallet Indexing Angle: 7.5 degrees Indexing accuracy: +/- 2 sec. Repeatability: +/- 1 sec. Clamping force of the pallet: 3,400 kg Max. workpiece weight: 150 kg Automatic Tool Changer: Number of Tools 30 Tool change 2.5 sec. Collets Clamping Time 7 sec. Tool diameter max.: 110 mm Too ...

Inv. Num. : 7736 Type: CL2000B Producer: MORI SEIKI Created: 2008 Parameters: Control system: Mitsubishi MAPPS III Switch-on hours: 37200 h Maximum turning length: 560 mm Max. turning diameter: 350 mm

Inv. Num. : 7790 Type: SL-4T Producer: MORI SEIKI Created: 1984 Parameters: Control system: FANUC 6T Maximum turning diameter over bed: 490 mm Maximum turning diameter over support: 320 mm Maximum spindle speed: 3000 1/min Length: 3100 mm Width: 1900 mm Height: 1900 mm Weight: 5500 kg Equipment: Conveyor

x-travel: 635 mm y-travel: 510 mm z-travel: 460 mm Control: Siemens 840D total power requirement: kW weight of the machine ca.: 4 t dimensions of the machine ca.: 3,4 x 2,4 x 2,8 m Brand DMG Mori Seiki Machine no F666 Type DMC 635 V Ecoline Control Siemens 840D Year of make 2012 Table length 790 mm Table width 560 mm X 635 mm Y 510 mm Z 460 mm Spindle taper SK40 Speed maximum 12.000 RPM Chip transport Machine size 3.400 x 2.400 x 2.800 mm Machine weight 3.950 kg Tool magazine positions: 30 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 500 mm y-travel: 450 mm z-travel: 400 mm control: Siemens 840D total power requirement: 13/9 kW weight of the machine ca.: 4,7 t dimensions of the machine ca.: 3,4 x 2,5 x 2,2 m Brand DMG Mori Seiki Machine no F652 Type DMU 50 Ecoline Control Siemens 840D Year of make 2012 Table width 500 mm Table diameter 630 mm ø Table adjustable in degrees X 500 mm Y 450 mm Z 400 mm Spindle taper SK40 Speed minimum 20 RPM Speed maximum 10.000 RPM Maximum table load 200 kg Chip transport Machine size 3.400 x 2.500 x 2.200 mm Machine weight 4.700 kg Tool magazine positions: 30 B-as: -5/+110 ° C-as: 360 ° Engine power: 13/9 Kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

CNC controller: Mitsubishi M-720BM (MAPPS 2) Capacity X-axis travel mm: 260 Z-axis travel mm: 590 Turning length mm: 510 Max. turning diameter mm: ø: Ø356 Upper turret Tool holder: 12 Main spindle Speed spindle rpm: 5000 Drive power spindle kW: 15/11 Spindle bore mm: 73 Manufacturer: KITAGAWA Equipment Chip conveyor Signal lamp Tool measuring arm High pressure pump Workarea light 4th axis Interface for Bar feeder Rated power kVA Working time hours Under power: 7456 Spnidle: 5423 Basic machine dimensions / weight Length mm: 3495 Width mm: 2050 Height mm: 2230 Weight kg: 5800

x-travel: 600 mm y-travel: 400 mm z-travel: 400 mm control: MSX 501 Mori Seiki work table:: table surface area: 700 x 450 mm max. table load: 350 kg number of T-slots: 4 T-slot - width: 18 mm T-slot - distance: 100 mm Main spindle: Number of revolutions: 12.000 U/min power capacity - main spindel: 18,5 / 15 / 11 kW tool taper: BT 40 max. Torque: 110,5 Nm diameter of forward milling spindle bearing: 70 feeds: rapid travel x/y/z: 20.000 mm/min feed speeds: 1 - 20.000 mm/min Tipp feed: 15 Steps / 0 - 1.260 mm/min Tool-Presetter:: Number of Toolpositions in magazine: 40 Pos. Max. mould width: 80 mm max. tool-dia with free toolbox: 125 mm max. tool length: 250 mm max. tool weight: 8 kg change-time chip to chip: 2,8 sec change-time tool to tool: 1,0 sec total power requirement: 34 kVA weight of the machine ca.: 7,2 t dimensions of the machine ca.: 2,8 x 3,0 x 2,9 m Documents: Chip conveyo ...

Key data: 190 mm

Stock No: 3764 CNC LATHE Manufacturer: Mori Seiki, Type: ZT 1000Y Machine NO.: ZT101CB0056, Year of manufacture: 2003 Specifications: Max. circumferential diameter 190 mm dia. Max. turn. About BED 250 mm DIA. Main motor power 22/18.5 kw Main spindle speed range 6000 rpm Hole through drawing tube 46 mm dia. C axles 0.001 Y axis 40+/- mm Z Aksen Rapid Traverse 1/2 - 24 m/min Tool turret 1 with 16 stations Motor power driven tools 5.5 / 3.7 / 2.2 kW Kw Tool turret 2 with 16 stations Powered tools. 6000 rpm Sub-spindle Sub-spindle speeds 6000 rpm Control MSX-501 Fabr. Power on 15088 hours Operating hours spindle 5080 hours Controlled in 5+2 axes Accessories: Load and Unload device Hydr. Chuck main spindle 169 mm dia Hydr. Chuck Subspindle 169 mm dia Tool setter Weight: 5000 kg

YOM: 2003 CNC controller: MSX-501 Axes X-axis travel mm: 630 Y-axis travel mm: 600 Z-axis travel mm: 670 Rapid traverse m/min: 50 B-axis degrees: 360º (0.001º index) Rapid traverse m/min: 50 Worktable Number of pallets: 2 Table dimensions mm: 500x500 Maximum workpiece size (D x H) mm: ø800x1.000 Max. workpiece weight kg: 500 Spindle Spindle speed rpm: 14000 Spindle drive power kW: 18.5/22 Tool system Tool holder: ISO-40 Tool magazine slots: 60 Equipment Chip conveyor Signal lamp High pressure pump Internal coolant supply

GENERAL Project No.: 905722 Quantity: 1 pcs. Manufacturer: MORI SEIKI Type: SL 2500 Y/650 Control: MSG-805 L MAPPS Year of Make: 2003 Condition: Used machine DESCRIPTION TURN Max. turning diameter 356 mm Max. turning length 655 mm Max. circumferential diameter over bed 520 mm Max. rotation diameter over face slide 250 mm Max. circumferential diameter over bed cover 755 mm Max. speed main spindle 4500 1/min Max. power main spindle at ED 10-40/100% 18 kW Spindle passage main spindle 75 mm Spindle Flange Size Main Spindle A2-8 Axes on the main spindle unit C Hollow clamping cylinder on the main spindle Tailstock NC-controlled 1 turret on top Number of stations/powered by 12/12 Speed tool drive 6000 1/min Axles in the turret X/Y/Z Travel in X/Y/Z 160/120/590 mm Max. rapid traverse speed in X/Y/Z 18/-/24 m/min OTHER EQUIPMENT Tool life monitoring Spla ...

5-axis machining center Mori Seiki NHX 5000 Year of construction 2011 (bought new in 2013) Hours10768 Processing time 7172 hours Electricity one hour 29288 With few operating hours, used only for single part to small series production, mainly for special mechanical engineering The specifications are as follows: Travels: Cylinder Ø 500 x 700 Control M730BM (Mapps2) Speed 10,0000 rpm. Tool holder SK40 DIN 69871 Tool changer 60-fold Pallet changer 2-fold Accessories: Documentation Internal cooling Knoll 50 bar Conveyor Activation to 400 tool positions Pine pallet with long zero point clamping system Lang tensioning tower approx. 100 pieces of tool holders SK40 An on-site inspection is possible at any time by appointment.

x-travel: 560 mm y-travel: 560 mm z-travel: 630 mm Control: MSX 701 III MAPPS Main spindle:: Max. rpm: 14.000 min/-1 power capacity - main spindel: 18,5 / 11 kW max. Torque: 120 Nm tool taper: MAS BT 40 distance spindle center to table: 80 - 640 mm distance Spindlenose and center of table: 100 - 730 mm pallet changer:: numbers of pallets: 2 size of pallet: 400 x 400 mm max. workpiece weight: 400 kg max. workpiecediameter: 630 mm max. workpiece height: 900 mm change time of pallets: 6,0 sec b - axis: 0,001 ° Tool-Presetter:: number of toolpositions: 60 pos. tool taper: MAS BT 40 max. tool diameter: 70 / (140) mm max. tool length: 400 mm max. tool weight: 8,0 kg feeds:: rapid traverse ( X / Y / Z ): 50 m/min feed speeds: 0 - 50.000 mm/min Tipp feed: 0 - 1.260 mm/min total power requirement: 35 kVA weight of the machine ca.: 9,8 t dimensions of the machine ca.: 5,5 x 3,5 x 2,8 m Docume ...

Inv. Num. : 8330 Type: HR 8A Producer: MITSUI-SEIKI Generated: Parameters: Control system: FANUC Work table length: 1295 mm Work table width: 1295 mm Maximum table load (uniform): 3992 kg X-axis travel: 1800 mm Y-axis travel: 1500 mm Travel distances Z-axis: 1200 mm Machine height: 5500 mm Machine length: 12000 mm Machine width: 9200 mm Machine weight: 45000 kg

Key data: 275 mm, 4000 1/min

Mori Seiki NL 2500 SY / 1250 CNC lathe with Y-axis, driven tools and 2nd spindle CNC control MSX-850-lll (mitsubishi 720 BM) Turning diameter 275 /366 mm Spindle bore diameter 80 mm Spindle speed 4000 rpm Spindle motor 18.5/15 Kw X-axis travel 260 mm Y-axis travel +50 / -50 mm Travel Z-axis: 1345 mm Travel of the W-axis (sub-spindle to main spindle) 1275 mm Min. indexing C-axis main spindle 0.001° Number of tools on the turret 12x Number of driven tools 12 x Tool cone BMT Bar Feeder LNS Quick Load Servo lll Spindle-motor-driven tools 6000 U/ If you have any questions about the machine, as well as an appointment for a viewing, please contact us by phone or e-mail. Feel free to check out our other ads for a full overview of our stock.

Key data: 500 mm, 450 mm, 400 mm

Brand DMG Mori Seiki Machine No: F652 Type DMU 50 Ecoline Control Siemens 840D Year of construction 2012 Table width 500 mm Table diameter 630 mm ø Table adjustable in degrees X 500 mm Y 450 mm Z 400 mm Spindle Taper SK40 Minimum speed 20 RPM Maximum speed 10,000 RPM Maximum table load 200 kg Chip transport Machine size 3,400 x 2,500 x 2,200 mm Machine weight 4,700 kg Magazine slots: 30 B-axis: +110/-5° C-axis: 360° Engine power: 13/9 Kw

Key data: 635 mm, 510 mm, 460 mm

Brand DMG Mori Seiki Machine No: F666 Type DMC 635 V Ecoline Control Siemens 840D Year of construction 2012 Table length 790 mm Table width 560 mm X 635 mm Y 510 mm Z 460 mm Spindle Taper SK40 Maximum speed 12,000 RPM Chip transport Machine size 3,400 x 2,400 x 2,800 mm Machine weight 3,950 kg Magazine slots: 30

A CNC vertical machining center Akira Seiki is available. Travel X/Y/Z: 2060mm/850mm/815mm, spindle-table distance: 120mm-935mm, table dimensions X/Y: 2150mm/800mm, max. table load: 3240kg. Spindle power: 42kW, speed: 8000rpm, tool holder: BT50, rapid traverse X/Y/Z: 36m/36m/30m/min, positioning accuracy: 0.015mm, repetition accuracy: +/-0.005mm. Tool positions: 28, max. tool diameter: 100mm/200mm, max. tool length: 350mm, max. tool weight: 15kg. Machine dimensions X/Y: approx. 5000mm/3550mm, weight: approx. 14500kg, control: Mitsubishi 70, documentation available. On-site inspection is possible.

A CNC vertical machining center Akira Performa with a counter bearing on the A-axis is available. Travel X/Y/Z: 2060mm/850mm/815mm, spindle-table distance: 120mm-935mm, table dimensions X/Y: 2150mm/800mm, max. table load: 3240kg. Spindle power: 42kW, speed: 8000rpm, tool holder: BT50, rapid traverse X/Y/Z: 36m/36m/30m/min, positioning accuracy: 0.015mm, repetition accuracy: +/-0.005mm. Tool positions: 28, max. tool diameter: 100mm/200mm, max. tool length: 350mm, max. tool weight: 15kg. Machine dimensions X/Y: approx. 5000mm/3550mm, weight: approx. 14500kg, control: Siemens 828, documentation available. On-site inspection is possible.

Turning diameter: 420mm, turning length: 820mm, spindle bore: 105mm, speed: 3000rpm, spindle power: 22kW, travel X/Z: 280mm/820mm, tool positions: 10, drive tool speed: 6000rpm. Machine dimensions X/Y/Z: approx. 4400mm/2100mm/2300mm, weight: approx. 6000kg, control: Mitsubishi M-720BM (MAPPS 2), operating hours: 10000h. Including various accessories. The driven tools have never been used, only the Y-axis has run. Measuring arm and ball screw of the Y-axis are as good as new. Documentation available. On-site inspection is possible.

MITSUI SEIKI HR6A CNC machining center was built in 1984 in Japan by MITSUI SEIKI KOGYO CO., LTD. The machine is designed for precision milling, threading and boring of oversized workpieces with a maximum weight of 2 tonnes. All these machining processes are performed fully automatically, thanks to the use of an automatic pallet exchange system. This system allows workpieces to be loaded and unloaded simultaneously during machining, thus increasing production efficiency and significantly reducing machine downtime. The pallets are transported by a stable cast iron saddle on bed’s hardened and ground guideways. Movement of the X,Y,Z axes is performed on hardened and ground slideways. These ensure that the geometry of the axes remains constant, even when moving to end of their travels. All moving components, in turn, have Turcite B coated bearings, which ensure low friction and high vi ...

CNC controller: Mitsubishi M-720BM (MAPPS 2) Capacity X-axis travel mm: 260 Z-axis travel mm: 520 C-axis: 360º (0.001°) Turning length mm: 515 Max. turning diameter mm: ø: Ø356 Upper turret Tool holder: 12 Main spindle Speed spindle rpm: 5000 Drive power spindle kW: 15/11 Spindle bore mm: 73 Manufacturer: KITAGAWA Counter spindle Counter spindle travel mm: 525 Equipment Chip conveyor Signal lamp Tool measuring arm Workarea light Working time hours Under power: 7.456 Cutting Time: 5.423 Basic machine dimensions / weight Length mm: 3.495 Width mm: 2.050 Height mm: 2.230 Weight kg: 5.800

X-axis travel mm: 260 Z-axis travel mm: 590 B-axis travel mm: 624 Turning length mm: 515 Max. turning diameter mm: ø: 366 Swing over bed mm: ø: 923.8 Swing over cross-slide mm: 755 Bar work capacity mm: 52 Upper turret Number of tool slots St .: 16 Speed driven tools RPM: 6.000 Drive power driven tools kW: 5.5/5.5/3.7 (3min/5min/cont) Indexing time s: 0.25 Main spindle Speed spindle rpm: 6.000 Drive power spindle kW: 11/7.5 Spindle bore mm: 61 Chuck type: Hollow Chuck (6") Manufacturer: KITAGAWA Spindle nose: JIS A2-5 Counter spindle Speed spindle rpm: 6.000 Drive power spindle kW: 11/7.5 Spindle bore mm: 43 Chuck type: Hollow Chuck (6") Manufacturer: KITAGAWA Coolant system Tank capacity liter: 235 Equipment Chip conveyor Signal lamp High pressure pump Chuck foot switch (double) for main and counter spindle Interface for ...

Key data: 800 mm

Technical details are on picture. Parts shown by hand not come.

Technical data shown on picture. Parts shown by hand not come.

CNC controller: MITSUBISHI MSX-853 IV Axes X-axis travel mm: 560 Y-axis travel mm: 560 Z-axis travel mm: 660 Distance spindle nose - table surface mm: 80-640 Feed rates m/min: 0-60 Worktable Number of pallets: 2 Table dimensions mm: 400 x 400 Maximum workpiece size (D x H) mm: 630x900 Max. workpiece weight kg: 400 APC time s: 9 División estandar Grados: 360 - 0.001º Spindle Spindle speed rpm: 12.000 Spindle drive power kW: 15/11 Spindle torque Nm: 110 Bearing Inner Diameter mm.: 80 Tipo: SJ-2B4351TK Tool system Tool magazine slots: 40 Max. Tool Diameter: 70 With free neighboring places mm: 170 Max. Tool Length mm: 450 Max tool weight kg: 8 Tool Shanks : MAS-BT40 Equipment Chip conveyor Workarea light 4th axis Cooling Tank capacity: 170L High-pressure bar: 15 Machine running times Under power: 64.734 Rated power kVA: ...

x-travel: 600 mm y-travel: 530 mm z-travel: 510 mm Control: M 730 BM MAPPS IV Main spindle:: max. spindle speed: 10.000 min/-1 power capacity - main spindel: 15 / 11 kW tool taper: SK 40 transmission ratio: 1 spindle diameter in front bearing: 80 mm work table:: table surface area: 900 x 600 mm max. table load: 800 kg T-slots: 6x 18 x 100 mm distance spindle /table: 150 - 660 mm Tool-Presetter:: number of toolpositions: 30 pos. tool taper: SK 40 max. tool diameter: 80 mm max. tool-dia with free toolbox: 150 mm max. tool length: 300 mm max. tool weight: 8,0 kg change-time tool to tool: ca. 1,3 sec change-time chip to chip: ca. 3,45 sec feeds:: rapid traverse ( X / Y / Z ): 30 m/min feed speeds: 1 - 30.000 mm/min Tipp feed: 0 - 5.000 : 20 mm/min total power requirement: 30 kVA weight of the machine ca.: 6,0 t dimensions of the machine ca.: 4,5 x 3,5 x 2,7 m Documents: Chip conveyor:  ...

MAGNUM YAMA SEIKI BT-1300 CNC bed milling machine was built in 2007 in Taiwan by Magnum Machinery CO., Ltd. The machine, distinguished by its very rigid design and good kinematics, is an excellent choice for precision machining of heavy workpieces. The machining process is performed inside an enclosed workspace, which includes among others a large work table with a length of 1300 mm and a reliable spindle. Feed in the X and Y axes is performed by the work table, while in the Z axis it is performed by the spindle, which moves along precise vertical guides. All this is complemented by the installed MITSUBISHI CNC control, thanks to which the offered YAMA SEIKI BT-1300 CNC bed mill is extremely easy to operate. Technical specifications of the MAGNUM YAMA SEIKI BT-1300 milling machine - CNC controller: MITSUBISHI MELDAS 60S - work table length: 1300 mm - T-slot number: 5 - power: 22 k ...

Mori Seiki SL250 b 500 High-performance CNC lathe with bar feed (Kupa 2 m) Collet chuck Passage 65 mm Year of construction 1998 Control Fanuc 16l Block Recording Switch-on hours approx. 88875 Spindle hours 19,000 Miscellaneous accessories:

Key data: 610 mm, 1540 mm

Stock number: 3998 CNC LATHE Manufacturer: MORI SEIKI , Type: NTX 2000 / 1500 SZ MAPPS-IV CNC Year of Make: 2013 Specifications: Max. circumferential diameter 610 mm dia. Turning length 1540 mm Main spindle 4000 RPM - 26 kw Hole through drawing pipe 80 mm dia. Spindle bore 91 mm dia. C axis - head spindle movement 0.001 degrees X axis movement 675 mm Z ash movement 1562 mm Y axis +/- 125 mm mm B axis movement 120 degree - 0.0001 degree B axis spindle speed 12000 rpm B axis spindle effect 18.5 Sub-spindle 5000 RPM - 22 Kw Control MAPPS IV (MX711 ) 5 axis Fabr. Accessories: ATC Tool magazine with 76 stations Hydr. Chuck main spindle Kitagawa BB-210 - 250 mm/dia mm dia Hydr. Chuck Subspindle Kitagawa BB-208 - 200 mm/dia mm dia Car Door Chip conveyance. High pressure coolant pump 70 bar Measuring System Renishaw S ...

CNC Control: Mitsubishi M-720BM(MAPPS 3) Upper turret Tool holder: 12 Main spindle Max. spindle speed rpm: 4000 Spindle drive power kW: 18.5/15 Spindle bore mm: 91 Manufacturer: KITAGAWA Sub-spindle Spindle motor: 6000 Spindle drive power kW: 11/7.5 Spindle bore mm: 43 Manufacturer: KITAGAWA Equipment Conveyor Signal lamp Tool measuring arm High Pressure Pump Workspace light Common Variables for Custom Macros (100) Year of construction: 2011

turning diameter: 460 mm turning length: 795 mm control: MORI SEIKI M730 BM Swing diameter face slide: 590/360 mm spindle passage: 80 mm Traverse X/Z:: 260/795 mm Number of working hours: 19.552 h Cutting time: 10.704 h spindle drive: 18,5 kW total power requirement: 40 kVA weight of the machine ca.: 6,4 t dimensions of the machine ca.: 3.994 x 3.056 x 2.187 m Chip chuck Ø250 mm. Chuck sub-spindle Ø170 mm. Holder HAINBUCH chip conveyor suction Bar feeder Hydrafeed Multiservo mod MSV max. bar length 1,600 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 660/275 mm turning length: 1498 mm control: Fanuc/Mori Seiki MSX 701 total power requirement: 90 kVA weight of the machine ca.: 26,6 t dimensions of the machine ca.: 5301 x 2997 x 2788 mm 9-axis CNC turning and milling centre Fanuc MSX-701 CNC control Milling spindle at top (B axis), as full 4th axis, positioning 0.0001 deg. 40-position tool magazine 10-position turret at bottom, all positions driven 2 x 3-jaw quick-change chuck KNCS-N 315/91 KNOLL high-pressure coolant system, pressure setting 12/25/35/45/55/62 and 72 bar, with maintenance-free rotary filter system Chip conveyor Drain system for main spindle chuck (controlled via M function) Drain system for tool cutting edge (controlled via M function) Coolant gun incl. accessories Oil mist extraction Direct measuring system X1, X2, Y-axis Bar loader interface Double foot switch for both spindles Island ...

Manufacturer: Mori Seiki Model NLX 2500 Y/700 Top condition Year of construction 2012 only approx. 6000 operating hours incl. 12 antr. WZ Holders + 17 Static WZ Holders Quick-change system from EWS Hollow clamping device KITAGAWA BB210A821 + KITAGAWA SS1881K21 for the main spindle Coolant system with increased pressure 5 bar Hinged belt conveyor, right ejection Integrated part catcher for main spindle I/F for bar replenishment, LNS Double foot switch with protective cover Signal light (red, yellow, green) Total Counter Workpiece counters EU Tool Holder Package SAUTER BMT60 (T32259, T32260, T32261, T32262) SKM253 MSQP Transformer 45.0 kVA 15 bar Grundfos pump incl. Hydac Filter Cantilever length for driven tools 100 mm (limited Y-axis travel) (Y, SY, SMC)

Machining center Mori Seiki M25 – FH 2/35

Fabricante MORI SEIKI Modelo NLX2500SY/700 Mes / Año 12/2011 CNC MORI SEIKI M730 BM Capacidades Volteo sobre bancada/carro 590/360 mm. Diámetro máximo torneable 460 mm. Longitud máxima torneable 795 mm. Paso de barra 80 mm. Eje Y INCLUIDO Recorridos y avances Recorrido eje X/Z 260/795 mm. Rango eje Y ±50 mm. Recorrido sub-cabezal eje B 734 mm. Avance rápido ejes X, Z, B 30.0000 mm/min Avance rápido eje Y 10.0000 mm/min Avance trabajo ejes X, Y, Z, B 0-5.000 mm/min Cabezal Eje C en cabezal INCLUIDO Indexación eje C cabezal 0.001º Velocidad cabezal 4.000 rpm Número gamas velocidad cabezal 2 Tipo nariz cabezal JIS A2-8 Diámetro paso cabezal 91 mm. Potencia motor principal 18.5 kW Sub-cabezal Eje C en sub-cabezal INCLUIDO Indexación eje C sub-cabezal 0.001º Velocidad sub-cabezal 6.000 rpm Número gamas velocidad sub-cabezal 1 Tipo nariz sub-cabe ...

Key data: 260 mm, 500 mm

Turning-milling centre Manufacturer: Mori Seiki Type NL1500SY/500 Year of construction 2007 In operation 03/2008 Control MSX-850-III Y and C axis All 12 turret stations are powered Max. turning length 500mm max. turning diameter 260mm Spindle Passage 50mm Speed of the driven tools 6,000 rpm Feeds X Z B 30,000 Y 10,000 with LNS rod loading magazine, length 1000mm, max D 65mm reducer sleeves. Machine is sold with all accessories, steel holders, AGWs (all still very good) collets, chuck, pick-up chuck, documentation, extraction system. Machine only ran in single-shift operation.