maximum number of results exceeded > 1000
please refine your search
Model
(Manufacturer: SIEMENS)
Siemens Tube OPTI 150/30/50 HC Tubular housing: OPTI 150/30/50 HC - 100, Model No. 4803404 Tube Model No. 4803388 Focal spot 0.6/1.0 Depth Aperture Model No. 8375040 • Before taking over, all devices or systems have been tested on site for their functionality. • The tube is located in our warehouse in Freiberg / Germany. • You buy the tube in "IST" condition from the warehouse Freiberg (EXW), Saxony, Germany, and prepayment. • The sale is made as "Used", EXW Freiberg, Saxony, Germany, to resellers or dealers despite being fully functional without warranty. • The installation, commissioning and configuration of the system component must be carried out by the manufacturer or by a specialist or technician authorized by the manufacturer! • We are dealers of used medical devices. We do not repair or refurbish any of the items we sell. All items are used and sold as ...
Siemens Polydoros LX 30/50 Lite with control panel Model No.: 3848905 (generator cabinet) 3157554 (control panel) Year of Make: 2002 Condition: used, removed from functional system (Siemens Vertix 3D3) The generator is often used in combination with Siemens X-ray systems such as Multix, Vertix, Siregraph and other common Siemens X-ray machines. So it is perfect for replacing a defective generator for these systems. • Before taking over, all devices or systems have been tested on site for their functionality. • The generator is located in our warehouse in Freiberg / Germany. It is packed on pallets, professionally lashed and wrapped in stretch film and can be picked up immediately • You buy the generator in "IST" condition from the warehouse Freiberg (EXW), Saxony, Germany, and prepayment. • The sale is made as "Used", EXW Freiberg, Saxony, Germany, to resellers o ...
Siemens Polydoros IT 80 with control panel (touchscreen) Model No. 07759793 (generator cabinet) 10410669 (control panel) Year of Manufacture: 2008 (generator cabinet) 2021 (control panel) Condition: used, removed from functional system (Siemens Multix MT) The generator is often used in combination with Siemens X-ray systems such as Multix, Ysio or Siregraph. So it is perfect for replacing a defective generator for these systems. • Before taking over, all devices or systems have been tested on site for their functionality. • The generator is located in our warehouse in Freiberg / Germany. It is packed on pallets, professionally lashed and wrapped in stretch film and can be picked up immediately • You buy the generator in "IST" condition from the warehouse Freiberg (EXW), Saxony, Germany, and prepayment. • The sale is made as "Used", EXW Freiberg, Saxony, Germany ...
Key data: 7 KW, 2950 1/min
Electric motor, Flanged motor, 7,5kW, 2,950 rpm, 400V, 1CV3131A, 1LE16031CA134GB4, Siemens, mint condition Please note: This is an original product and not a replica from... Special price If you have a VAT number, we will be happy to issue you with an invoice without VAT. Mint condition! - never been used and is in mint condition, - comes from a spare parts warehouse of a certified production facility, - has very slight storage marks, no effect on function - is in its original packaging, - Please note: A fan impeller is fitted to the motor; we will include this free of charge, or, if you prefer, we will remove it before dispatch. - Weight of the motor: 79 kg 12 months warranty We give you 12 months warranty for these goods from the date of invoice. In case of any defect, which is not the fault of the buyer, the goods can be returned. We will refund the buyer only ...
we have a defective Singel MOTOR module from Siemens to hand over 1P 6SL3120-1TE28-5AA3
Electric Motor Siemens Simotics Main Motor Drive 1PH8284-1DB13-0BU1-Z Hersteller [manufacturer]: Siemens Type [ type]: 1PH8284-1DB13-0BU1-Z Construction year: almost as good as new Weight [weight]: approx. 1.200kg very neat condition Inspection under power can be done at short notice. We will be happy to answer any further questions you may have. Price, from stock here plus VAT. Condition: good - ready for demonstration Delivery: from stock - as seen We ask for your order. Other machines and systems available from stock – please inquire. We look forward to seeing you. Phone 017621834834
Te koop Siemens pressure transmitter druktransmitter met manifold Type: PTB 99 ATEX 2122 Aantal: meer dan 20 Order number: 4341.6 In goede staat Voor meer info graag bellen of mailen. Email: wh.derikxgmail.com Phone: +31620758459 De prijs is excl. 21%btw Voor internationale verzending prijs aanvragen
Te koop Siemens pressure transmitter druktransmitter met manifold Type: PTB 13 ATEX 2007 X Aantal: 10 Order number: 4341.7 In goede staat Voor meer info graag bellen of mailen. Email: wh.derikxgmail.com Phone: +31620758459 De prijs is excl. 21%btw
Te koop Siemens pressure transmitter druktransmitter met manifold Type: PTB 13 ATEX 2007 X Aantal: 10 Order number: 4341.7 In goede staat Voor meer info graag bellen of mailen. Email: wh.derikxgmail.com Phone: +31620758459 De prijs is excl. 21%btw
Te koop Siemens pressure transmitter druktransmitter met manifold Type: PTB 13 ATEX 2007 X Aantal: 1 Order number: 4341.14 Gebruikt, in goede staat Voor meer info graag bellen of mailen. Email: wh.derikxgmail.com Phone: +31620758459 De prijs is excl. 21%btw Voor internationale verzending prijs aanvragen
Te koop Siemens druktransmitter pressure transmitter 2020 Type: Sitrans FCT030 Aantal: 4 stuks beschikbaar Order number: 4341.17 Voor meer info graag bellen of mailen. Email: wh.derikxgmail.com Phone: +31620758459 De prijs is excl. 21%btw Voor internationale verzending prijs aanvragen
located in the southern region of the Kingdom of Bahrain, the station produces Electrical Power by means of Gas Turbine Technology. Kraft Work Union (KWU) AG (Siemens) of Germany for Phase I, which comprised, 5 (Five) Units of V93.1 Frame Gas Turbine Generators with 50MW production capacity each.
Key data: 928 KW, 1100 kVA, 400 V
Siemens condensing steam turbine CFR3 G5A 2008 power generators, Turbine with AC generator and control system, 92,014 operating hours, continuously maintained. 880 KWel x 1,500 rpm, 400 V / 50 Hz. AC generator: Siemens GEN1FC2 5 62-4LD40-Z, 1,110 KVA Manufacturer: Siemens Model: CFR3 G5A Type: Steam Turbine Condensate Serial number: 4 535 041 Performance mech. [KW]: 928 Pressure inlet [bar]: 31 – 43, 39 norm Temperature inlet [°C]: 340 – 416, 390 norm Pressure output [bar]: 0.5 – 1.5, 0.5 norm Temperature output [°C]: 320 Year of Make: 2008 Hours: 92,014 AC Generator Siemens GEN1FC2 5 62-4LD40-Z Manufacturer: Siemens Model No.: GEN1FC2 5 62-4LD40-Z Type: AC Synchronous Generator Power [KVA]: 1,110 Voltage [V]: 400 Frequency [Hz]: 50 Current [A]: 1,602 Speed [1/min]: 1,500 Year of Make: 2008 Hours: 92,014 Weight [kg]: 5,000
NEVER USED Specifications Manufacturer: Siemens Type: 8DH10 Voltage: 12 kV Rated current: 630 A Frequency: 50 Hz Short-circuit rating: 20 kA / 1 s Insulation: SF₆ gas insulated Year of manufacture: 2008 Standard: IEC 60265-1 / 62271 Features Compact medium voltage switchgear Hermetically sealed pressure system Integrated circuit breaker and earthing switch Suitable for transformer substations, industrial distribution and utility applications Made in Germany The units are visually in clean condition and available as shown in the pictures. Suitable for: Medium voltage distribution Transformer protection Ring main units (RMU) Industrial and utility power systems Contact for pricing, availability and additional information. GAS POWER HOLLAND
Specifications Manufacturer Siemens Model SGT-600DLE Year 2025 ( Complete overhaul ) Condition new Wattage 24,5 MW Hours 0 Frequency 50 Hz/ 60Hz Fuel Type Natural Gas Voltage 11000 KV Quantity N.1 Located EUROPE General Information - The turbine operates at 50Hz or 60hz . Timeframe for an additional power supply. - The turbine operates on natural gas - New core engine, 0 hours engine - Core engine is under warranty by Siemens - Low emissions and long maintenance intervals - Suitable for power generation and mechanical drives 2. Device specifications 1. Power output: 24,5 MW(e) 2. Fuel: Natural Gas. 3. Frequency: Dual 50/60Hz 4. Gross efficiency: 35.00% 5. Heat rate: 10,294 kJ/kWh (9,756 Btu/kWh) 6. Turbine speed: 9,500 rpm 7. Print ratio: 16.9:1 8. Exhaust mass flow: 40.0 kg/s (88.2 lb/s) 9. Exhaust gas temperature: 555°C (1,031° ...
Specification of the Equipment 1Gas Turbine SGT-300， Capacity 8MW 1.1 Manufactured in 2022, this unit has zero operating hours. It is a complete package, including core engine, generator, gearbox, intake/exhaust systems, lube oil system, electrical system, and all related auxiliarie
Siemens X-ray recording device Multix Swing with Generator IT S Swing 55 Tube Optiphos 135/30/55R 0.6/1.2 Vertical Tripod Vertix Swing • Before taking over, all devices or systems have been tested on site for their functionality. • The system is located in our warehouse in Freiberg, Germany. • We are dealers of used medical devices. We do not repair or refurbish any of the items we sell. All items are used and sold as is, unless otherwise stated. We do not give any guarantees or warranties for the devices sold. It is the buyer's responsibility to ensure that all equipment is thoroughly inspected and overhauled by qualified technicians prior to use on the patient.
Siemens X-ray recording device Multix Swing with Generator IT S Swing 55 Tube Optiphos 135/30/55R 0.6/1.2 Vertical Tripod Vertix Swing • Before taking over, all devices or systems have been tested on site for their functionality. • The system is located in our warehouse in Freiberg, Germany. • We are dealers of used medical devices. We do not repair or refurbish any of the items we sell. All items are used and sold as is, unless otherwise stated. We do not give any guarantees or warranties for the devices sold. It is the buyer's responsibility to ensure that all equipment is thoroughly inspected and overhauled by qualified technicians prior to use on the patient.
used power converter input 3 x 400V 25A 50/60 Hz Output up to 485 V 30 A Field voltage 325 V 5 A Top condition
CPU315-2DP 321-7BH00-0AB0 321-1BL00-0AA0 322-1BL00-0AA0 353-1AH01-0AE0 353-1AH01-0AE0 331-7KB02-0AB0
Siemens SIMATIC MP 277 10" Touch Panel HMI The Siemens SIMATIC MP 277 10" is a high-quality industrial HMI operator panel designed for demanding automation applications. It features a large 10-inch color touchscreen, providing clear visualization and intuitive control of machines and production processes. This panel is part of Siemens' SIMATIC HMI series and is widely used in industrial environments for monitoring, control, and data visualization. It supports multiple communication interfaces, making it compatible with a wide range of Siemens PLCs and automation systems. Key Features: 10" color TFT touchscreen display User-friendly interface for machine operation and monitoring High performance and reliable operation in industrial environments Supports MPI / PROFIBUS / Industrial Ethernet communication (depending on version) Configurable with Siemens WinCC Flexible / TIA Po ...
Siemens SIMATIC C7-621 PLC with Integrated HMI. The Siemens SIMATIC C7-621 is a compact industrial automation controller that combines a powerful PLC (based on the S7-300 series) with an integrated operator interface. This all-in-one unit is designed for machine control applications where space-saving and reliability are essential. The device features a built-in display and keypad, allowing direct operator interaction without the need for an external HMI panel. It includes integrated digital and analog inputs/outputs and supports expansion with additional modules for increased flexibility. Key Features: Integrated PLC (S7-300 based CPU) Built-in HMI with display and keypad Compact, space-saving design Integrated I/O (digital and analog) MPI communication interface Expandable with additional I/O modules Programmable with Siemens STEP 7
Condition Used Brand Siemens Type ZR88-LA132SP4EW Voltage Volt 3 fase 400 volt Force KW 5,5 KW - 137 Nm Rotational speed RPM 384 RPM Shaft size mm 60 mm Flens pasrand 250 mm Version Eigen gewicht 170 kilo Length 110.00cm Width 35.00cm Height 35.00cm Related Products All employees speak Dutch, German, and English. Prices are exclusive of VAT. Shipping is possible (for an additional charge). (Changes and errors in technical data, information, and prices as well as prior sale are reserved.)
Simatic S7 1500 CPU, 6ES7 515-2AM01-0AB0, Siemens, used Top Please note: This is an original product and not a replica from... Special price If you have a VAT number, we will be happy to issue you with an invoice without VAT. Used! - comes from a spare parts warehouse of a certified production facility, - is in very good condition and fully functional, - We assume that the device has never been used, but cannot say for certain. Ensuring the function: In order to ensure the functionality of the goods, the buyer must check the goods at the time of acceptance or put them into operation. In case of any defect, which is not the fault of the buyer, the goods can be returned within 2 weeks. We will refund the buyer maximum the product price paid to us. For these goods we have to exclude warranty claims of the buyer for improvement, exchange, subsequent delivery or also for ...
Condition NEW Brand Siemens Type CAF38 AK90LP4 Voltage Volt 1 chamfer 230 volt Power KW 1500 watt 1,5 KW 111 Nm RPM 95 RPM speed Shaft size mm 25 mm Version Version 32 kilo Units in stock 10 Length 50.00cm Width 25.00cm Height 18.00cm All employees speak Dutch, German and English. Prices are exclusive of VAT. Shipping is possible (at an additional cost). (Subject to changes and errors in technical data, information and prices as well as prior sale.)
We are pleased to present an exclusive offer for two fully re-manufactured SGT-300 gas turbines with a mechanical drive configuration (8 MW) and one gearbox (1500 rpm, 50 Hz), originally manufactured in 2018. These units have been fully overhauled to zero hours, providing up to 48,000 operational hours, and were serviced in a Siemens-approved workshop. Key Features – 8 MW Mechanical Drive: • Power output: 8.4 MW • Efficiency: 35.3 % • Heat rate: 10,204 kJ/kWh (9,666 Btu/kWh) • Exhaust temperature: 490 °C (914 °F) • NOₓ emissions: ≤ 15 ppmvd • Fuel flexibility: Natural gas, liquid fuel, dual fuel Commercial Advantages: • Offer price including gearbox: on request • Ready for immediate deployment • Siemens-approved quality and service, zero-hour units This is a rare opportunity to acquire high-performance turbines ...
Used Operator Panel OP 15-A1 6AV3515-1EB30-1AA0 Tested
