SAMAG used machine for sale

SAMAG MFZ 2-2 CNC milling machine was built in 2005 in Germany. This specially designed machine for the automatic machining of workpieces made of metallic materials has been equipped with two high-performance spindles and two work tables with a rotary axis, allowing for simultaneous machining of a part and loading/unloading of another. This solution maximises production efficiency and shortens production times, making the machine significantly distinguishable from other milling machines on the market. The machining, characterised by high quality and precision, is performed in automatic mode or in the setting up mode, using rotary tools taken from a capacious magazine. During its service life, the SAMAG twin-spindle milling machine has worked around 40000 hours and has been continuously serviced. The total weight of the machine is approximately 22 tonnes. Technical specifications of ...

HORIZONTAL BI-SPINDLE MACHINING CENTER 5 AXES Condition Used Good Condition Control type Siemens Sinumerik X Axis Stroke 450 mm Y Axis Stroke 500 mm Z Axis Stroke 450 mm Rapid feed X-Y-Z 60 m/min Spindle spacing 450 mm Spindle speed 16,000 rpm Spindle power 28 Kw Tool attachment HSK 63 Tool magazine 2 x 50 positions Chip Evacuator Accessories

Screening machine Samag Type: Stainless Steel Screen area : 1100 x 600 mm Screen opening: [] 3 mm incl.: 1 vibration motor 0,15 kW Stock: 2 pieces

X-travel: 450mm, y-travel: 500mm, z-travel: 450mm, max. rotational speed: 16.000/min, spindle distance: 450mm, connected load: 72kVA, controls: SIEMENS Sinumerik 840D, length: 5100mm, width: 3050mm, height: 2800mm, weight: 20t.

X-travel: 300mm, y-travel: 500mm, z-travel: 450mm, max. rotational speed: 16,000/min, spindle distance: 300mm, connected load: 82kVA, controls: SIEMENS Sinumerik 840D, length: 5100mm, width: 3050mm, height: 2800mm, weight: 20t.

Description: Serial number: 67001 Control: Sinumerik 840D Axes: Z: 1300 mm W: 900 mm Feed speed: C: 19.200 mm/min W/Z- 5000 mm/min Rapid traverse: C: 47.600 mm/min W/Z: 10.000 mm/min Feeds: W/Z: 16 800 N Drilling method: Gun drill Bore diameter min/max: 2.5-18 mm Number of drilling spindles: 1-4 mm Drilling depth: 800 mm Spindle holder: HSK80 25x100 mm Spindle distance: 160 mm Power: 5.5 kw Spindle speed: 10.000rpm Rapid traverse: 10m/min Coolant supply per spindle: 105 bar 45 l/min Nominal spindle torque: 35 Nm Rotation: 360º Installed Power: 70kg weight approx.: 14,700 kg, Approx. Onsite Dimension. (l x w x h): 7,900 x 7,250 x 2,850 mm

This SAMAG MFZ 2-2 horizontal machine center was made in the year 2008 in Germany. It is equipped with a Siemens Sinumerik and has 5 axis. The machine has a spindle speed of 16000 rpm.

This SAMAG TFZ 2L-1000 Drilling machine was made in 2015 in Germany and has 13585 production hours. It is equipped with a HEIDENHAIN control unit. It has a NC rotary table B-axis with 1100x1100mm (7t) and an a-axis as drilling and milling unit with swivel range -30/+15°. The machine has a reinforced main spindle drive with spindle speed 6000 rpm. As additional equipment it comes with tool changer for ISO 40, low-maintenance oil mist extraction system, traveling support steady rests for drilling diameters up to 25.5mm, drip tray with step grate for X-axis 1600mm and rinsing gun.

core drilling diameter max.: 5-40 mm bore depth: 1500/1800 mm swing diameter: mm Control: Heidenhain ITNC 530 x-axis: 2500 mm y-axis: 1650 mm z-axis: 1550 mm w-axis: 2250 mm a-axis: -30/ +30 Grad b-axis: 360 ° table surface area: 1800x1800 mm table load: 26 t tool taper: HSK 100 spindle turning speed - stepless: 0-6000 U/min rapid traverse: 20 m/min Feed speed: 1-20 m/min. max. torque on the working spindle: 952/648 Nm threading: M30 Drive power - drilling and milling device: 17/25 kW Power connection: 102 kVA coolant: 585 Liter high-pressure pump: 30-90 bar chip conveyor: tool changer: 32 Plätze total power requirement: kW weight of the machine ca.: 55 t dimensions of the machine ca.: 9,85 x 9x5 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.