We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
subcategories
(3rd category level)
Manufacturer:
used
Tünkers sheet laminating station 1100; good condition; Manual version; Working width 1100 mm; Feed table; Display band; Format min. 200x280mm, max. 1100x1400mm; Carrier material thickness 250 g / m2-12 mm; Deck material 80 g / m2-800 g / m2. Tünkers sheet laminating machine 1100; manually version; good condition; working width 1100 mm; feed table; delivery belt; size min. 200x280mm, max. 1100x1400mm; base material 250 g / m2-12mm; cover material 80 g / m2-800 g / m2.
used
Eckeneinziehmaschine / Corner Pulling Machine FOMM CPMSerial-Nr. 76A34 Manuelle Bedienung / Manuell OperationOnline-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nuernberg - Can be test
used
Block glue press Müro 5000/A3 TM; good condition; cleaned and tested; Table equipment; Format A3; Stack increase. Padding press Müro 5000/A3 TM; good condition; cleaned and checked; table top machine; size A3; Pile elevation.
used
Spindelpresse - Spindle Press Dietz Listing SP-SPressflaeche / Pressing Size max. 450 x 550mm Gereinigt und neu Lackiert / Cleaned and new painted-Online-Video-Inspection by Skype-Video- -We would be very pleased with your visit - more machines on Stock- -Available Immediately - Can be inspect- -On Stock Emskirchen / Nuernberg - Can be test-
used
Nordson 3100-2AA32; State as is; only checked for function; Ready. At this point we allow ourselves to note that all offered machines are in our unrestricted possession or access and are present in our warehouse. Visits and demonstrations are possible on request in our premises. We would also be pleased to inform you about our complete stock, as only part of our portfolio is presented here.
used
Spindelpresse - Spindle Press Krause SPPressflaeche / Pressing Size max. 550 x 750mm Gereinigt und neu Lackiert / Cleaned and new paintedOnline-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nuernberg - Can be test
used
Schmedt Praecoll; good condition; 2.glue basin; Block width 110-450mm; Block height up to 345mm; Blockstaerke up to 82mm.; Ready. At this point we allow ourselves to note that all offered machines are in our unrestricted possession or access and are present in our warehouse. Visits and demonstrations are possible on request in our premises. We would also be pleased to inform you about our complete stock, as only part of our portfolio is presented here.
used
Buchdeckenausbiegemaschine - Case Bender Orient CXYear 1993 - Serial- No. 9384/15344 Working width max. 500mm-Online-Video-Inspection by Skype-Video- -We would be very pleased with your visit - more machines on Stock- -Available Immediately - Can be inspect- -On Stock Emskirchen / Nuernberg - Can be test-
used
Two-roller gluing machine for the processing of cold glues. Same glue application by changing the distance between the two rollers to each other. width 350 mm. ; ready for use. At this point we allow ourselves to note that all offered machines are in our unrestricted possession or access and are present in our warehouse. Visits and demonstrations are possible on request in our premises. We would also be pleased to inform you about our complete stock, as only part of our portfolio is presented here.
used
Dreiseitenschneider - Halbautomatisch - Three-Knife-Trimmer - Semi-automatic Wohlenberg A43/30WBaujahr / Year 1959 - Serial-No. 4651 Semi-Automatic-Online-Video-Inspection by Skype-Video- -We would be very pleased with your visit - more machines on Stock- -Available Immediately - Can be inspect- -On Stock Emskirchen / Nuernberg - Can be test-
used
Traenklein BRM; good ZUustand; cleaned and checked; Working width 500mm.; Ready. At this point we allow ourselves to note that all offered machines are in our unrestricted possession or access and are present in our warehouse. Visits and demonstrations are possible on request in our premises. We would also be pleased to inform you about our complete stock, as only part of our portfolio is presented here.
used
Heftkopf / Stitching Head Serien-Nr. / Serial-No. 495026262 Online-Video-Inspection by Skype-VideoWe would be very pleased with your visit - more machines on StockAvailable Immediately - Can be inspectOn Stock Emskirchen / Nuernberg - Can be test
used
Edge gluing machine Sumbel Coronel; good condition; cleaned and tested; Working width 60mm; 2-rollers; suitable for hot or cold glue; Glue basin height-adjustable. Edge gluing machine Sumbel Coronel; good condition; cleaned and checked; working width 60mm; two rollers; used for hot or cold glue; glue reservoir adjustable in hight.
used
Spindelpresse - Spindle Press Krause SP-SPressflaeche / Pressing Size max. 500 x 600mm Gereinigt und neu Lackiert / Cleaned and new paintedOnline-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nuernberg - Can be test
used
Paper boring machine Dürselen Corta PB 04; Cleaned and tested; 4 drill heads (up to 6 stick.usable); Drill cooling and lubrication; Sliding table; Endless drilling tape; Inlay depth behind the holes 65mm; Max. Stack height 50mm; Sliding table size before the drills 300mm; Max. Drilling distance over sliding table 420mm. Paper drilling machine Dürselen Corta PB 04; The cleaned and checked; Four heads (up to 6 heads); Driller cooling and lubrication; Sliding table; endless drilling band; size behind drillers 65mm; Max.pile hight 50mm; Seft of table in front of the drillers 300mm; max.drilling distance over the table 420mm.
used
Spindelpresse - Spindle Press Krause SP-SPressflaeche / Pressing Size max. 500 x 600mm Gereinigt und neu Lackiert / Cleaned and new paintedOnline-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nuernberg - Can be test
used
Format: max 460 x 310 x 60 mm, min 125 x 100 x 3 mm Book block thickness: max 60 mm; min 3 mm Capacity: max 6,000 c/h Equipment: Gathering machine • 16 stations • TO 801 Controls • Incorrect and double-sheet control Intermediate building blocks • Set-up element • Manual system • Vibrating element • Criss-cross delivery -• coupled with Bookbinding • 21 pliers • Vibration station • Milling and roughening station • Hotmelt back glue unit • Hotmelt side gluing unit • Premelter • Gauze station • Shed transshipment feeder • Creasing station 2 to 6 times • Envelope pressing • Laying down device • Strap delivery • Cooling section • Cooling distance approx. 20m • inline with Three-knife trimmer • Conveyor belt to the three-knife trimmer • Kolbus HD 150 three-knife trimmer Optional accessories---not included-- ...
used
Blockleimpresse / Block Gluing Machine Muero 4 x 5000 A3 WT 21 Pressing stations with stack high of 50cm 1 Drying hot air blower Stapelhoehe / Stack high max. 52,5cm Pressenbreite / Press width max. 52,5cm Pressentiefe / Press deep max. 32cm Gewicht / Weight approx 60 KG Power supply 230 V - 1100/2150 WOnline-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nuernberg - Can be test
used
Built in 1997 Size: max 460 x 310 x 60 mm; min 125 x 100 x 3 mm Book block thickness: max 60 mm; min 3 mm Speed: max 6,000 c/h Equipment gathering machine • 16 stations • gatherer ZU 801 Controls • missing and double sheet control intermediate elements • Spiral Raceway • Hand Fed • Jogging element • Criss-Cross Delivery • -connected with Perfect Binder • 21 clamps • Jogging station • Milling and roughening station • Hotmelt Spine Gluing Unit • Hotmelt Side Gluing Unit • Premelter • Gauzing Station • Stream Cover Feeder • cover scoring 2 to 6 lines • Cover pressing station • Lay down device • Shingle Conveyor Delivery optional equipment:--not included-- • extending of the gathering machine • Opticontrol signature image reader • Conveyer system approx. 20 m • three knife trimmer Kolbus HD 150
used
Eckenausstanz- und Schlitzmaschine / Corner Punching and Slot machine Krause ES-SMSchlitztiefe / Slot depth 220mm Hub 30mm Eckenausstosstiefe / corner ejection depth 220mmOnline-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nuernberg - Can be test
used
Built in 1998Size max 460 x 310 x 60 mm min 125 x 100 x 3 mmBook block thickness max 60 mm min 3 mmSpeed max 6.000 c/hEquipment gathering machineo 16 stationso gatherer ZU 801o machine number gatherer 376o -connected withperfect bindero 17 clampso milling and roughening stationo brushing stationo hotmelt spine gluing unito hotmelt side gluing unito 2 premelterso stream cover feedero cover scoringo cover pressing stationo smooth lay down deviceo - option - not includedo PURt spine gluing unit; working condition
used
Kantenanleimmaschine - Edge Gluing Machine Jagenberg KAM 60Serial-No. 12.30124/11 Working width max. 60mm Kaltleim / Cold Glue systemOnline-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nuernberg - Can be test
used
Built in 1998Size max 205 x 130 x 30 mm min 35 x 50 mmProduct weight max 1-300 g/qmSpeed max up to 200 c/min; working condition
used
Heisspraege - Kniehebelpraegepresse - Embossing Hot Stamping Press Krause FNPSerial-No. 4798 Stamping size: 550 x 400 mm-Online-Video-Inspection by Skype-Video- -We would be very pleased with your visit - more machines on Stock- -Available Immediately - Can be inspect- -On Stock Emskirchen / Nuernberg - Can be test-
used
Equipment perfect bindero hand fedo 3 clampso milling and roughening stationo hot melt spine gluing unit; working condition
used
4 Zangen Klebebinder - 4-Clamp Perfect Binder Horizon BQ 440Year 1996 - Serial-No. Buchrueckenbeleimung / Spine Gluing Hotmelt Seitenbeleimung / Sight Gluing Hotmelt Fraeswerk mit Absaugung / milling section with extraction Fraestiefe einstellbar / milling depth adjustable Automatic scoring and automatic feeding of the coversTechnische Daten / Technical Details: Papierformat / Sheet Size min. 75 x 75mm - 320 x 320mm Umschlagstaerke / Cover thickness: 80 - 300 gsm Buchstaerke / book thickness min. 1 - 40 mms (10 up to 400 pages) Paper thickness: 52 - 157gsm Leistung / speed max. 150 - 1.100 Cycles/hOnline-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nuernberg - Can be test
used
Built in 2001Speed max 18.000 c/hEquipment gathering machineo 32 stationso 32 feeders RG 318 Do reject gate after the gathering machineperfect bindero 36 clampso infeed chanel with joggero milling and roughening stationo hot melt spine gluing unito hot melt side gluing unito 2 premelterso stream cover feedero cover nipping and pressing stationo smooth lay down deviceoptionales Equipment:--not included--o PUR spine gluing unito premelter for PUR gluing unit; working condition
used
Stanzwerkzeug 4x4 3:1 Daumenloch - Punching tool 4x4 3:1 thumb cut for KUGLER-WOMAKO ProPunch 50-110Arbeitsbreite / Working width 550mm Stanzwerkzeug 4x4 3:1 Daumenloch fuer KUGLER-WOMAKO ProPunch 50-110 Punching tool 4x4 3:1 thumb cut for KUGLER-WOMAKO ProPunch 50-110Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nuernberg - Can be test
used
3 feeders1 folding stationadressing unitSitma 950 foil wrapping machineinfeed to the stacker with reject unitstackerbelt delivery; working condition
used
Falzeinbrenn- und Abpressmaschine - Book press and joint-setting machine Zechini CIMATICYear 2000 - Serial-No. 124/00 Buch Format max. Buchhoehe 48cm x Buchbreite 35cm x Buchblockstaerke 9cm Book Size max. height 48cm x width 35cm x thickness 9cm Leistung max 150 in St./h / Output 150 pcs/h Pressluftanschluss 6 bar / Air pressure supply 6 bar-Online-Video-Inspection by Skype-Video- -We would be very pleased with your visit - more machines on Stock- -Available Immediately - Can be inspect- -On Stock Emskirchen / Nuernberg - Can be test-