Solver - KS360 - belt sander - Motor power: approx. 1.6 – 2.6 kW - Belt speed: approx. 7.5 – 34 m/s (depending on the pulley) - Drive: Electric motor with belt drive - Sanding belt length: 2,500 mm - Sanding belt width: 5 – 75 mm - Contact washers: Ø approx. 100 – 225 mm - Strap system: 3-roller system Dimensions: LxWxH 0.9x0.7x1.8 meters / Weight 350Kg
1. Dowel cutting and chamfering machine Löser model AA220 Used and fully functional 2. Dowel cutting and chamfering machine Löser model AA220 used, but electrically decommissioned 3. 21 set of dowel wreaths (short and long) for dowel cutting and chamfering machine AA220 for dowels with a diameter of 6 to 20 mm 4. Spare parts (shelf content)
used
Combined contact and belt sanding machine with belt sanding arm and surface belt sanding table Surface grinding device left, roller Ø: 100 mm Sanding belt length: 950 x 100 mm Horizontal/vertical table support: 120 x 180/10 x 250 mm Contact grinding wheel right, 200 mm Ø, abrasive belt dimensions: 50 x 2000 mm 2 spindle speeds due to pole-switchable motor: 11450/2900 rpm Drive motor: 380 V, 0.9/1.3 kW Space requirement: 1000 x 400 x 1800 mm Weight: 140 kg
Code: 0103 Brand: LOESER - GERMANY Model: AA-220 Wooden dowel production machine complete with n° 2 dowels
Belt Grinding and Polishing Machine Löser SMG Specifications: • Power 2 x 4 kW • Speeds on both sides 3-stage 1400/1800/2200 rpm • Belt clamping arms for belt lengths up to 3,500 mm • Surface-mounted / free-standing extraction hoods for pane diameters 400 - 600 mm
Dowel wreaths for dowel cut-out and chamfing machine solver type AA 220 available for the following dowel diameters: Ø 5mm = 3 pieces Ø 6mm = 6 pieces Ø 8mm = 6 pieces Ø 10mm = 6 pieces Ø 11mm = 3 pieces Ø 12mm = 4 pieces Total 28 pieces. Especially for the wreaths for 6 and 8 mm dowels, special designs are included, for dowels 6x20 or 8x25.
Loeser KS 350 Contact belt grinding machine (conventional) grinding belt length 3500 / 4000 mm x 50 mm motor 3.5 / 4 kW n
Loeser KS 350 Belt grinding machine (conventionel) Beltlength 3500 / 4000 mm x 50 mm Motor 3,5 / 4 kW; cleaned and ready for operation
band width: 150 mm band length: 3500 mm band speed: 30 m/sec Scheiben-Ø: 400 mm grinding feed: 0 - 5 m/min work piece revolutions: 0 - 140 U/min power capacity - workpiece power: 2,2 kW grinding diameter: 100 - 600 mm clamping length: 6000 mm bed length: ca. 8000 mm voltage: 380 V / 50 Hz motor speeds:: 1450 U/min power capacity: 15 kW weight of the machine ca.: 9,5 t dimensions of the machine ca.: 8,6 x 2,6 x 2,5 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
A centerless round and polishing belt grinding machine Loeser (RPS 376/2+2), retrofitted in 2024, is available. Stations grinding/polishing: 2/2, grinding range: 10mm-120mm, belt dimensions X/Y: 3000mm/200mm, feed rate: 15m/min, machine dimensions X/Y/Z: approx. 3500mm/2000mm/2200mm, weight: approx. 2500kg. Documentation available. An on-site inspection is possible.
Manufacturer: LOESER Model : RPS374/8 Year of Manufacture: 2007 (The system went into operation in 2008) Voltage: 400 V Frequency: 50 Hz Current: 200 A Overall dimensions are around 8 m × 2.2 m Cylindrical grinding machine with 1–10 stations for processing cylindrical materials made of steel and other metallic or non-metallic materials. Technical Data: - Diameter Range: 3 – 150 mm - Contact Wheels: Dimensions 400 x 150 mm - Part Feed Rate: approx. 0 – 30 m/min (depending on the workpiece transport system) - Feed Wheels: - Manually adjustable based on the workpiece diameter - Pneumatic pressure application Abrasive Belts: - Dimensions: - Standard: 2500 x 150 mm - Optional: 3500 x 150 mm - Belt Tension: Pneumatic - Belt Drive Power: - 5.5 kW (optional: 7.5 kW or 11 kW) The machine is prepared for wet grinding Find more here - / Contact us at -
Two Loeser centerless round polishing machines are available. Workpiece diameter range: 10mm-30mm, workpiece length range: 100mm-1000mm, stations: 2, working direction: left-right, magazine with input and output table: 1000mm/1000mm. Including magazines and input and output table. Documentation available. On-site inspection is possible. Expected to be available from April 2025.
