ZMM used machine for sale

Key data: 600 mm, 1500 mm

The lathe allows the operator to choose between manual, automatic or combined operation. With the intuitive software, the operator can effortlessly program operations and cycles up to the finished part. Specifications: Circulation diameter over bed: 600 mm, Circulation diameter over carriage: 400 mm, Bar passage: 80 mm, Drive power: 11 KW, spindle speed in 3 gear stages 8-2,000 rpm Standard accessories: Rapid traverse for longitudinal and flat, electronic handwheels, foot brake, Multifix "C", 3-shoe chuck 250 mm

Key data: 500 mm, 240 mm, 1500 mm

ZMM CU 502 - Universal lathe - Center height: 250mm - Distance between centers: 1500 mm - Swivel Ø above the bed: 500 mm - Swivel Ø above the carriage: 240 mm - Spindle bore: 72 mm - Spindle speed: 16 - 2000 rpm (18 steps) - Engine power: 10 kW - Operating voltage: 400 V / 15 - 25 A - Dimensions WxHxD: 3100 x 1400x x 1250 mm - Weight: approx. 3120 kg

ZMM C11MB conventional lathe, manufactured in Bulgaria, is used for machining workpieces with a maximum length of 1000 mm and a diameter of 460 mm (turning above bed) or 350 mm (turning above support). The offered C-11MB x 1000 mm universal lathe of indestructible design has been equipped with a 7.5 kW main motor and a high-speed spindle to provide the user with maximum productivity and reliability for many years. Technical data of the ZMM C11MB metal lathe - maximum workpiece diameter (turning above bed): 460 mm - maximum workpiece diameter (turning over support): 350 mm - maximum workpiece length at the tusk: 1000 mm - maximum spindle speed: 2000 rpm - minimum spindle speed: 16 rpm - number of spindle speeds: 18 - spindle passage: 65 mm - motor power of ZMM C-11MB lathe: 7.5 kW

Key data: 417 , 830

Lathe in excellent condition, mechanically like new. Technical data: - Centres height: 417 mm - Distance between the centres: 2000 mm - Spindle hole 113mm - Bench width: 560 mm - Turning diameter on the bench: 830 mm - Turning diameter on the deep hole: 510 mm - Visualization by DRO Available for immediate delivery. Machine in excellent condition, like new!

: neu : ca. 4 Monate ab Auftragse : Bulgarien : 75720 € : 1521.97 € : 860 mm : 3000 mm : 430 mm : 132 mm : 620 mm : 560 mm : 11 : 140 M : 17 : 7,5 - 1015 1/min : 150 : 0.039 - 18 mm/U : 0.02 - 9 mm/U : 0.5 - 180 mm : 60 - 1/6 Gänge/ : 0.125 - 45 : 240 - 2/3 : 435 mm : 150 mm : 105 mm : 6 MK : 225 mm : 15 kW : 3470 mm : 1700 mm : 1730 mm : 4650 kg driven by conventional transmission 3-axes digital readout quick change toolpostAmestra type Multifix with 4 holders (3 square, 1 round) 3-jaw chuck Bison3295/DIN6350, Ø 400 mm spindle dead center four way rapid traverse device foot pedal brake longitudinal stop for 1 position coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock tailstock quill reducer mechanized movement of tailstock low voltage machine lamp operating m ...

: neu : Bulgarien : 105460 € : 2098.65 € : 1090 mm : 3000 mm : 500 mm : 155 mm : 690 mm : 700 mm : 15 : 160 M : 24 : 160 : 0.032 - 38.9 mm/U : 0.016 - 19.45 mm/U : 0.5 - 480 mm : 60 - 1/16 Gänge/ : 0.125 - 120 : 525 mm : 270 mm : 125 mm : 6 MK : 260 mm : 22 kW : 7500 kg driven by manual transmission 3-axes digital readout quick change toolpostAmestra with 4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 500 mm spindle dead center coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates tailstock quill reducer electric motor movement of tailstock low voltage machine lamp operating manual machine according to ",CE", FURTHER TURNING LENGTHS turning length1.500 mm € 92.180,- turning length4.000 mm € 112.870,- turning length5.000 mm € 123.060,- turning length6.00 ...

: neu : Bulgarien : 121780 € : 2423.42 € : 1320 mm : 3000 mm : 625 mm : 155 mm : 940 mm : 700 mm : 15 : 160 M : 4 : 3,7 - 15,6, 14,7 - 62, 58 U/Min : 160 : 0.032 - 38.9 mm/U : 0.016 - 19.45 mm/U : 0.5 - 480 mm : 1/16 - 60 Gänge/ : 0.125 - 120 : 685 mm : 270 mm : 125 mm : 6 MK : 260 mm : 30 kW : 8550 kg driven by variable speed control (4 steps) 3-axes digital readout FAGOR with CSS (constant surface speed) quick change toolpostAmestra with 4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 500 mm spindle dead center coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates tailstock quill reducer electric motor movement of tailstock low voltage machine lamp operating manual machine according to ",CE", FURTHER TURNING LENGTHS: turning length1.500 mm € 108.130,- turnin ...

: neu : Bulgarien : 84100 € : 1690.41 € : 860 mm : 3000 mm : 430 mm : 135 mm : 620 mm : 560 mm : 11 : 140 M : 7 - 42, 28 - 170, 165 - 1 U/Min : 150 : 0.039 - 18 mm/U : 0.02 - 9 mm/U : 0.5 - 180 mm : 60 - 1/6 Gänge/ : 0.125 - 45 : 240 : 435 mm : 150 mm : 105 mm : 6 MK : 225 mm : 15 kW : 4650 kg driven by variable speed control (3 steps) 3-axes digital readout FAGOR with CSS (constant surface speed) quick change toolpostAmestra type Multifix with 4 holders (3 square, 1 round) 3-jaw chuck Bison3295/DIN6350, Ø 400 mm spindle dead center main motor with frequency invertor four way rapid traverse device foot pedal brake longitudinal stop for 1 position coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock tailstock quill reducer mechanized movement of tailstock low volt ...

: neu : Bulgarien : 110020 € : 2189.4 € : 890 mm : 3000 mm : 400 mm : 155 mm : 490 mm : 700 mm : 15 : 160 M : 4 : 3,7 - 15,6, 14,7 - 62, 58 U/Min : 160 : 0.032 - 38.9 mm/U : 0.016 - 19.45 mm/U : 0.5 - 480 mm : 60 - 1/16 Gänge/ : 0.125 - 120 : 525 mm : 270 mm : 125 mm : 6 MK : 260 mm : 30 kW : 7500 kg driven by variable speed control (4 steps) 3-axes digital readout FAGOR with CSS (constant surface speed) quick change toolpostAmestra with 4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 500 mm spindle dead center coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates tailstock quill reducer electric motor movement of tailstock low voltage machine lamp operating manual machine according to ",CE", FURTHER TURNING LENGTHS: turning length1.500 mm € 96.170,- turning l ...

: neu : Bulgarien : 99560 € : 2001.16 € : 890 mm : 3000 mm : 400 mm : 155 mm : 490 mm : 700 mm : 15 : 160 M : 24 : 160 : 0.032 - 38.9 mm/U : 0.016 - 19.45 mm/U : 0.5 - 480 mm : 60 - 1/16 Gänge/ : 0.125 - 120 : 525 mm : 270 mm : 125 mm : 6 MK : 260 mm : 22 kW : 7500 kg driven by manual transmission 3-axes digital readout quick change toolpostAmestra with 4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 500 mm spindle dead center coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates tailstock quill reducer electric motor movement of tailstock low voltage machine lamp operating manual machine according to ",CE", FURTHER TURNING LENGTHS: turning length1.500 mm € 86.280,- turning length2.000 mm € 89.420,- turning length4.000 mm € 106.810,- turning length5.000  ...

: neu : Bulgarien : 115920 € : 2306.81 € : 1090 mm : 3000 mm : 500 mm : 155 mm : 690 mm : 700 mm : 15 : 160 M : 4 : 3,7 - 15,6, 14,7 - 62, 58 U/Min : 160 : 0.032 - 38.9 mm/U : 0.016 - 19.45 mm/U : 0.5 - 480 mm : 60 - 1/16 Gänge/ : 0.125 - 120 : 240 : 525 mm : 270 mm : 125 mm : 6 MK : 260 mm : 30 kW : 8050 kg driven by variable speed control (4 steps) 3-axes digital readout FAGOR with CSS (constant surface speed) quick change toolpostAmestra with 4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 500 mm spindle dead center coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates tailstock quill reducer electric motor movement of tailstock low voltage machine lamp operating manual machine according to ",CE", FURTHER TURNING LENGTHS: turning length1.500 mm € 102.070,-  ...

: neu : Bulgarien : 111510 € : 2219.05 € : 1320 mm : 3000 mm : 625 mm : 155 mm : 940 mm : 700 mm : 15 : 160 M : 5 - 1000 : 160 : 0.032 - 38.9 mm/U : 0.016 - 19.45 mm/U : 0.5 - 480 mm : 60 - 1/16 Gänge/ : 0.125 - 120 : 685 mm : 270 mm : 125 mm : 6 MK : 260 mm : 8550 kg driven by manual transmission 3-axes digital readout quick change toolpostAmestra with 4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 500 mm spindle dead center coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates tailstock quill reducer electric motor movement of tailstock low voltage machine lamp operating manual machine according to ",CE", FURTHER TURNING LENGTHS: turning length1.500 mm € 98.230,- turning length4.000 mm € 118.820,- turning length5.000 mm € 120.010,- turning length6.00 ...

Description: Height of centers mm: 420 Swing diameter over bed mm: 830 Swing diameter over carriage mm: 585 Swing diameter over gap in bed mm: 1020 Width of ways mm: 520 Distance between centers mm: 3000 Spindle nose DIN 55027№11 Spindle nose taper mm: 103 Spindle bore mm: 120 Drehlänge: 3,000 mm, turning diameter over bed: 1,020 mm, turning diameter over slide: 585 mm, spindle bore: 120 mm, weight approx.: 5,500 kg, Approx. Onsite Dimension. (l x w x h): 1,500 x 5,500 x 1,600 mm

Spindle power: 15kW Incl. glasses

: neu : 2023 : 1675 : prompt, Zwischenverkauf v : Bulgarien : 21070 € : 431.94 € : 1 : 325 mm : 1000 mm : 165 mm : 32 mm : 190 mm : 200 mm : 5 : 4,5 M : 12 : 85 - 2.000 1/min : 48 : 0.006 - 1.77 mm/U : 0.003 - 0.885 mm/U : 0.1 - 28 mm : 75 - 2,5 Gänge/ : 0.1 - 1.75 : 4 - 70 : 150 mm : 95 mm : 40 mm : 3 MK : 100 mm : 2.2 kW : 2150 mm : 950 mm : 1350 mm : 770 kg driven by manual transmission 3-axes digital readout Fagor 40i quick change toolpostAmestra with 4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 160 mm spindle dead center coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock low voltage machine lamp operating manual machine according to ",CE", incl. following optional equipment: 1 lenght stop FURTHER TURNING LENGTHS ON REQUEST The d ...

: neu : Bulgarien : 40800 € : 828.24 € : 500 mm : 1500 mm : 250 mm : 72 mm : 300 mm : 400 mm : 8 : 80 M : 21 : 20-2000 1/min : 120 : 0.04 - 12 mm/U : 0.02 - 6 mm/U : 64 : 0.5 - 120 mm : 0.125 - 30 : 315 mm : 130 mm : 90 mm : 5 MK : 230 mm : 2950 kg driven by manual transmission 3-axes digital readout quick change toolpostAmestra with 4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 250 mm spindle dead center longitudinal stop for 1 position coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock low voltage machine lamp operating manual machine according to ",CE", FURTHER TURNING LENGTHS: turning length1.000 mm € 39.720,- turning length2.000 mm € 42.390,- turning length3.000 mm € 46.740,- turning length4.000 mm € 51.830,- turning l ...

: gebraucht : 1991 : 1681 : ca. 2 Wochen ab Auftragse : Bulgarien : 7900 € : 1 : 580 mm : 2000 mm : 285 mm : 72 mm : 380 mm : 400 mm : DIN55022, Größe 8 : 80 M : 11,2 - 2000 1/min : 0.04 - 3 mm : 255 mm : 140 mm : 75 mm : 5 MK : 200 mm : 7.5 kW : 3550 mm : 1250 mm : 1630 mm : 3450 kg 3-axes digital read out RSF 3-jaw chuck Forkardt Dm. 315 mm steady rest 4x steel holder gap bed type chuck protection machine lamp coolant equipment operating manual in German WITH FOLLOWING DEFECT: the clockwise rotation does not engage, so the hand lever must remain held The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : Bulgarien : 49390 € : 1002.62 € : 630 mm : 2000 mm : 315 mm : 103 mm : 430 mm : 400 mm : 11 : 120 M : 21 : 12,5 - 1250 1/min : 120 : 0.04 - 12 mm/U : 0.02 - 6 mm/U : 0.5 - 120 mm : 60 - 1/4 Gänge/ : 0.125 - 30 : 240 - 1 : 315 mm : 90 mm : 90 mm : 5 MK : 230 mm : 11 kW : 3310 kg driven by manual transmission 3-axes digital readout quick change toolpostAmestra with 4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 315 mm spindle dead center longitudinal stop for 1 position coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock low voltage machine lamp operating manual machine according to ",CE", FURTHER TURNING LENGTHS: turning length1.000 mm € 46.620,- turning length1.500 mm € 47.600,- turning length3.000 mm € 53.540,- turning ...

: gebraucht : 2020 : 1658 : prompt, Zwischenverkauf v : Bulgarien : 26500 € : 1 : 400 mm : 1000 mm : 200 mm : 52 mm : 235 mm : 320 mm : 6 : 6 M : 12 : 50-2.240 1/min : 80 : 0.015 - 0.6 mm/U : 0.0075 - 0.3 mm/U : 40 : 0.25 - 7.5 mm : 120 - 4 Gänge/ : 0.0625 - 1.875 : 16 - 480 : 235 mm : 110 mm : 50 mm : 4 MK : 100 mm : 4 kW : 2750 mm : 1100 mm : 1600 mm : 1540 kg driven by manual transmission 3-axes digital readout Fagor 40i quick change toolpostMultifix Type Bwith4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 200 mm spindle noseNr. 6 DIN 55027 four way rapid traverse device spindle dead center coolant equipment 1 pce. flange plate for lathe chuckØ 200 mm 1 adapter sleeve full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock low voltage machine lamp operating manual  ...

: neu : Bulgarien : 71220 € : 1431.52 € : 760 mm : 3000 mm : 380 mm : 132 mm : 520 mm : 560 mm : 11 : 140 M : 17 : 7,5 - 1015 1/min : 150 : 0.039 - 18 mm/U : 0.02 - 9 mm/U : 0.5 - 180 mm : 60 - 1/6 Gänge/ : 0.125 - 45 : 410 mm : 150 mm : 105 mm : 6 MK : 225 mm : 15 kW : 4470 kg driven by conventional transmission 3-axes digital readout quick change toolpostAmestra type Multifix with 4 holders (3 square, 1 round) 3-jaw chuck Bison3295/DIN6350, Ø 400 mm spindle dead center four way rapid traverse device foot pedal brake longitudinal stop for 1 position coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock tailstock quill reducer mechanized movement of tailstock low voltage machine lamp operating manual machine according to ",CE", FURTHER TURNING LENGTHS: tu ...

: neu : 2022 : 1672 : prompt, Zwischenverkauf v : Bulgarien : 33100 € : 671.93 € : 1 : 1 : 400 mm : 1000 mm : 200 mm : 52 mm : 235 mm : 320 mm : 6 : 6 M : 12 : 50-2.240 1/min : 80 : 0.015 - 0.6 mm/U : 0.0075 - 0.3 mm/U : 40 : 0.25 - 7.5 mm : 120 - 4 Gänge/ : 0.0625 - 1.875 : 235 mm : 110 mm : 50 mm : 4 MK : 100 mm : 4 kW : 2750 mm : 1100 mm : 1600 mm : 1540 kg driven by manual transmission 3-axes digital readout Fagor 40i quick change toolpostMultisuissewith4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 200 mm spindle noseNr. 6 DIN 55027 four way rapid traverse device spindle dead center coolant equipment 1 pce. flange plate for lathe chuckØ 200 mm 1 adapter sleeve full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock low voltage machine lamp operating manual mach ...

: neu : ca. 4 Monate ab Auftragse : Bulgarien : 68840 € : 1383.68 € : 600 mm : 1500 mm : 300 mm : 80 mm : 400 mm : 400 mm : 8 : 90 M : 3 : 20 - 100, 80 - 400, 400 - U/Min : max. 8 m/min : max. 8 m/min : 290 mm : 90 mm : 5 MK : 225 mm : 11 kW : 3,5 / 22 kW/Nm : 1,75 / 11 kW/Nm : 120 Nm : 1250 daN : 1050 daN Fast and simple communication between the operator and the lathe. Simple workpieces are machined in the same way as on the universal lathe, but more efficient. Complicated workpieces are machined in the same way as on the universal lathe, but faster. Complicated workpieces are machined in the same way as on the CNC lathe, but easier. Based on the controller Schneider Magelis the intelligent, self-developed ZMM Sliven software leads the operator also without programming skills simple and fast to the finished workpiece. The interface is simple and with large icons, which is convenien ...

: neu : 2024 : 1682 : prompt, Zwischenverkauf v : Bulgarien : 43490 € : 882.85 € : 1 : 600 mm : 2000 mm : 300 mm : 80 mm : 400 mm : 400 mm : 8 : 90 M : 21 : 20 - 2000 1/min : 120 : 0.04 - 12 mm/U : 0.02 - 6 mm/U : 64 : 0.5 - 120 mm : 60 - 1/4 Gänge/ : 0.125 - 30 : 315 mm : 130 mm : 90 mm : 5 MK : 230 mm : 7.5 kW : 3600 mm : 1250 mm : 1400 mm : 3110 kg driven by conventional gearbox 3-axes digital readout Fagor 40i quick change toolpostAmestra Multisuisse type C with 4 holders (3 square, 1 round) 3-jaw chuck Bison3204/DIN6350, Ø 250 mm spindle dead center four way rapid traverse device electromagnetic brake longitudinal stop for 1 position coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock low voltage machine lamp operating manual machine according to ",CE&q ...

Height of centers : 400 mm Swing over bed : 890 mm Swing over cross slide : 490 mm Swing in gap : 1050 mm Width of bed : 700 mm Distance between centers : 1500 mm Spindle nose DIN 55027 : No. 15 Spindle bore : 155 mm Spindle taper : 160 Metric Number of spindle speeds : 24 Spindle speed ranges : 6,3 - 1250 Main motor power : 22 (30) kW Number of feeds : 160 Longitudinal feed range : 0,032 - 38,9 mm/rev Cross feed range : 0,016 - 19,45 mm/rev Number of threads : 80 (of each type) Metric thread range : 0,5 - 480 mm Inch thread range : 60 - 1/16 Tpi Module thread range : 0,125 - 120 Module DP thread range : 240 - 1/4 DP Cross slide travel : 525 mm Top slide travel : 270 mm Quill diameter : 125 mm Quill taper : No. 6 Morse Quill travel : 260 mm For DBC 3000 mm : 7500 kg

Description: Spindle speed: 16 - 2000 rpm Center length: approx. 1600 mm Center height above bed: approx. 300 mm Turning diameter above bed: approx. 600 mm Seat height above support: approx. 200 mm Turning diameter above support: approx. 400 mm The machine is equipped with a tailstock, a clamping holder and a three-jaw chuck (diameter: 250 mm) Spindle clearance: approx. 74 mm weight approx.: 2,000 kg, Approx. Onsite Dimension. (l x w x h): 3,000 x 1,000 x 1,800 mm

: neu : ca. 6 Monate ab Auftragse : Bulgarien : 78300 € : 1566 € : 760 mm : 3000 mm : 380 mm : 132 mm : 520 mm : 560 mm : 11 : 140 M : 3 : 7 - 42, 28 - 170, 165 - 1 U/Min : 150 : 0.039 mm/U : 0.02 mm/U : 0.5 - 180 mm : 60 - 1/6 Gänge/ : 0.125 - 45 : 2 - 240 : 410 mm : 150 mm : 105 mm : 6 MK : 225 mm : 15 kW : 4470 kg driven by variable speed control (3 steps) 3-axes digital readout FAGOR with CSS (constant surface speed) quick change toolpostAmestra type Multifix with 4 holders (3 square, 1 round) 3-jaw chuck Bison3295/DIN6350, Ø 400 mm spindle dead center main motor with frequency invertor four way rapid traverse device foot pedal brake longitudinal stop for 1 position steady and following rest coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock tailstock quill ...

: neu : ca. 6 Monate ab Auftragse : Bulgarien : 46190 € : 933.04 € : 500 mm : 1500 mm : 250 mm : 75 mm : 300 mm : 400 mm : 8 : 80 M : 3 : 25-100, 100-400, 500-2000 U/Min : 120 : 0.04 - 12 mm/U : 0.02 - 6 mm/U : 0.5 - 120 mm : 0.125 - 30 : 1 - 240 : 315 mm : 130 mm : 90 mm : 5 MK : 230 mm : 11 kW : 2950 kg driven by variable speed control (3 steps) 3-axes digital readout FAGOR with CSS (constant surface speed) quick change toolpostAmestra with 4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 250 mm spindle dead center longitudinal stop for 1 position coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock low voltage machine lamp operating manual machine according to ",CE", FURTHER TURNING LENGTHS: turning length 1.000 mm € 45.150,- turning  ...

: neu : ca. 6 Monate ab Auftragse : Bulgarien : 55600 € : 1112 € : 630 mm : 2000 mm : 315 mm : 103 mm : 430 mm : 400 mm : 11 : 120 M : 3 : 16 - 63, 63 - 250, 315 - U/Min : 120 : 0.04 - 12 mm/U : 0.02 - 6 mm/U : 0.5 - 120 mm : 060 - 1/4 Gänge/ : 0.125 - 30 : 1 - 240 : 315 mm : 130 mm : 90 mm : 5 MK : 230 mm : 11 kW : 3310 kg driven by variable speed control (2 steps) 3-axes digital readout FAGOR with CSS (constant surface speed) quick change toolpostAmestra with 4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 315 mm spindle dead center longitudinal stop for 1 position coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock low voltage machine lamp operating manual machine according to ",CE", FURTHER TURNING LENGTHS: turning length 1.000 mm � ...

: neu : ca. 6 Monate ab Auftragse : Bulgarien : 23160 € : 472.46 € : 400 mm : 750 mm : 165 mm : 32 mm : 190 mm : 200 mm : 5 : 4,5 M : 2 : 85-405, 470-2200 U/Min : 48 : 0.006 - 1.77 mm/U : 0.003 - 0.885 mm/U : 0.1 - 28 mm : 0.1 - 1.75 : 4 - 70 : 150 mm : 95 mm : 40 mm : 3 MK : 100 mm : 2.2 kW : 770 kg driven by variable speed control (2 steps) 3-axes digital readout FAGOR with CSS (constant surface speed) quick change toolpostAmestra with 4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 160 mm spindle dead center coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock low voltage machine lamp operating manual machine according to ",CE", FURTHER TURNING LENGTHS: turning length1.000 mm € 23.480,- The data for this ad was created with ModulMWS  ...

: neu : ca. 6 Monate ab Auftragse : Bulgarien : 37580 € : 759.12 € : 400 mm : 750 mm : 200 mm : 52 mm : 235 mm : 320 mm : 6 : 6 M : 4 : 18-98, 48-265, 144-790, 3 U/Min : 80 : 0.015 - 0.6 mm/U : 0.0075 - 0.3 mm/U : 40 : 0.25 - 7.5 mm : 120 - 4 Gänge/ : 0.0625 - 1.875 : 16 - 480 : 235 mm : 110 mm : 50 mm : 4 MK : 100 mm : 7.5 kW : 1530 kg driven by variable speed control (4 steps) 3-axes digital readout FAGOR with CSS (constant surface speed) quick change toolpostAmestra with 4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 200 mm spindle dead center coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock low voltage machine lamp operating manual machine according to ",CE", FURTHER TURNING LENGTHS: turning length 1.000 mm € 38.210,- turning  ...