zfwz 250 used for sale

3 s/s booth racks, dimensions: (2x) 1080 mm x 250 mm x 1570 and 2100 mm x 250 mm x 1570 mm.

Description: Precision bore gauge with two contact points, with elastic elements for centering. Lightweight and robust construction with CFRP elements for less thermal expansion and greater corrosion protection. Handle on the holder for less thermal influences. Smooth and precise transmission of the contact tip stroke via a curved segment. The different contact points with fixed hardened steel ball allow you to compose the different ⌀ to be measured. Application: For precision measurement of ⌀, roundness and cylindricity of internal bores and profiles. In wooden box. Range: 250-450 mm, Depth: 200mm The item that is delivered is NOT the one shown in the pictures, but an equal one Approx. Onsite Dimension. (l x w x h): 365 x 160 x 70 mm, weight approx.: 5 kg

Description: Precision bore gauge with two contact points, with elastic elements for centering. Lightweight and robust construction with CFRP elements for less thermal expansion and greater corrosion protection. Handle on the holder for less thermal influences. Smooth and precise transmission of the contact tip stroke via a curved segment. The different contact points with fixed hardened steel ball allow you to compose the different ⌀ to be measured. Application: For precision measurement of ⌀, roundness and cylindricity of internal bores and profiles. In wooden box. Range 250-450 mm, dp 1500 mm The item that is delivered is NOT the one shown in the pictures, but an equal one Approx. Onsite Dimension. (l x w x h): 920 x 175 x 50 mm, weight approx.: 6 kg

Description: 4' Hydraulic pressure 2500 Kg, Material: cast iron, Model: full size, Use: lathe The item that is delivered is NOT the one shown in the pictures, but an equal one Approx. Onsite Dimension. (l x w x h): 470 x 185 x 130 mm, weight approx.: 23 kg

Description: 4' Hydraulic pressure 2500 Kg, Material: cast iron, Model: full size, Use: lathe The item that is delivered is NOT the one shown in the pictures, but an equal one Approx. Onsite Dimension. (l x w x h): 470 x 185 x 130 mm, weight approx.: 23 kg

Description: Chuck for self-centering lathe 3 + 3 jaws 250 mm, 1600 r/min, body in ground cast iron, closing with helical ring, concentric manual clamping, tempered jaws The item that is delivered is NOT the one shown in the pictures, but an equal one Approx. Onsite Dimension. (l x w x h): 320 x 320 x 210 mm, weight approx.: 20 kg

Description: Power supply: 230V/50Hz Current consumption: 2.1A Power: 250W Efficiency: 3-10 m3/h Maximum flow rate: 167 litres/minute Connection diameter: 1' Maximum lifting height: 8.5 m Maximum depth: 7 meters Power cord length: 5.6m Material: nickel, cast iron Maximum temperature of the pumped liquid: 40°C Capacitor: 10μF Waterproof class: IPX8 Approx. Onsite Dimension. (l x w x h): 500 x 400 x 200 mm, weight approx.: 10 kg

Description: Power supply: 230V/50Hz Current consumption: 2.1A Power: 250W Efficiency: 3-10 m3/h Maximum flow rate: 167 litres/minute Connection diameter: 1' Maximum lifting height: 8.5 m Maximum depth: 7 meters Power cord length: 5.6m Material: nickel, cast iron Maximum temperature of the pumped liquid: 40°C Capacitor: 10μF Waterproof class: IPX8 Approx. Onsite Dimension. (l x w x h): 500 x 400 x 200 mm, weight approx.: 10 kg

Description: Power supply: 230V/50Hz Current consumption: 2.1A Power: 250W Efficiency: 3-10 m3/h Maximum flow rate: 167 litres/minute Connection diameter: 1' Maximum lifting height: 8.5 m Maximum depth: 7 meters Power cord length: 5.6m Material: nickel, cast iron Maximum temperature of the pumped liquid: 40°C Capacitor: 10μF Waterproof class: IPX8 Approx. Onsite Dimension. (l x w x h): 500 x 400 x 200 mm, weight approx.: 10 kg

Make: Fryma Line ML 250 / MZ 250 for soy milling, production of soy milk Perforated disc mill: 45 kW Colloid mill: 60 kW Capacity: approx. 7000 l/h (soy milk) Dimensions LWH: 1700 x 1500 x 1550 mm Weight: approx. 1100 kg

Key data: 250 , 1500 , 3000

New device with new machines Warranty -Temperature 250°C -Inside BxDxH 1500 x 3000 x 2000 mm -Outside BxDxH 2410 x 3560 x 2730 mm -Content 9000 litres -Control Omron E5CC (target actual value controller) -Time timer Galaxy -Overtemperature protection Omron K8 Relay -Entry lanes -2 pcs circulating air fans -Exhaust air and supply air flap manually adjustable -Safety door switch -Power 43 KW -Connection 400 V , 3 phased -not suitable for solvent-containing substances -Temperature accuracy +/- 5°C -incl. documentation, CE declaration We are happy to offer installation and commissioning.

Clamping force: 100t, heating output: 6,1kW, connected load: 35kW, weight: 3.95t.

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, tipping cylinders -Manufacturer: Yale, hydraulic cylinder double-acting stroke 250 mm -Type designation: H-20/250 -Piston rod: Ø 42 mm -Lifting capacity: 20 t -Operating pressure: max. 700 bar -Dimensions: Ø 85 x 455 mm -Weight: 14.1 kg

Warranty 12 months - T max 250°C - Inside W 1000 x D 1000 x H 1500 mm - Outside W 1765 x D 1425 x H 2300 mm - with controller KS40 from PMA (TARGET/ACTUAL CONTROLLER) this is not a program controller! - Installation of new Jumo Dicon Touch controllers possible on request - Inlet rails, for feeding the furnace with a loading rack - Exhaust fan - Supply air filter - Heating capacity 17.4 KW - Weight: 760 kg -Documentation We are happy to offer installation and commissioning. Viewing in our warehouse by appointment. We have new and used convection ovens. Get in touch with us!

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, interchangeable jaws wedge bar chucks, interchangeable jaws power chucks -Top jaws: soft top jaws for wedge bar chucks, helical teeth -Type: FGB 250/404 SFA 250 -Jaw width: 26 mm -Dimensions: see photo technical. drawing -Total dimensions: 125/90/H87 mm -Total weight: 5.0 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, interchangeable jaws, wedge bar chucks, interchangeable jaws power chucks -Top jaws: soft top jaws for wedge bar chucks, helical teeth -Type: SMW MFG-250 FWB 250/424 -Jaw width: 26 mm -Dimensions: see photo technical. drawing -Total dimensions: 125/95/H85 mm -Total weight: 4.5 kg

Code 151301 DESCRIPTION Gear Hobber Ø 250 x modul 6 Make Modul Model ZFWZ 250/3 Serial number 112 625 Year ± 1983 Ma. Workpiece diameter 250 mm Max. modul 6 Max. axialmovement 275 mm Max. tangential movement 100 mm Max. gearangle setting 45 degrees Max. diam. millingcutter 145 mm Max. millingcutter length 170 mm Diameter clampingtable 275 mm Diameter tablcenter positioning 200 mm Distance millingcutter to clampingsurface min/max. 195 – 470 mm Distance middle millingcutter to center table 20 – 230 mm Millingspeeds in steples in 2 Ranges 20 – 200 rpm 125 – 400 rpm Feeds axial 0.2 – 100 mm/wheel/rounds radial 0.025 – 4 mm/wheel/rounds tangential 0.1 – 5 mm/wheel/rounds Power main motor 7.5 kW – 380 Volts Power connection 22 kVA Accessories Chipconveyor All speedchang ...

Floor Type Milling and Boring Machine SKODA Model: WD 250 Offer ID: 452 Manufacturer: SKODA Model: WD 250 New in: 1969 Condition: very good, under power,being serviced Localisation: Poland - We are owner this machine ! Technical details Rotary table: 2 000 x 2 000 mm Floor plates (8 psc): 3 000 x 1 500 mm Spindle diameter: 250 mm Bed haight: 600 mm Bet width: 2 400 mm X Travel: 5 000 mm Y Travel: 4 000 mm Main spindle intersection: 250 mm Main spindle ball metrical: 140 mm Maximum moment on the main spindle axis: 300 000 kgcm Intersection of the rapid spindle: 125 mm Ball in the rapid spindle: 430 mm Maximum depth of boring with main spindle: 2 250 mm Maximum depth of boring with the rapid spindle: 630 mm Feed of the spindle's crosshead: 500 mm The deepest position of the main spindle axis over the bearing: 1 100 mm Dimensions: 12 500x6 000x9  ...

132 kW, max. 7,5 bar, 24,2 m3/min, New srew.

Filtration unit furbished with 2 PALL 8304 X-length housings For Hydrolic and lube oil filtration Any filterelements available on request

approx. 25 m ³ / 25,000 litres steel tank / firefighting water tank / water container / water cistern / storage container / water tank: good condition content: 25 m³ / 25,000 litres Material: stainless steel tanks, above ground or underground tank Dimensions: approx. Ø 2.00 m x 8.00 m approximately Weight: approx. 6.0 t The tank is repainted from the outside with a bitumen paint, see picture above. The container is used, inside empty and properly cleaned. According to the age traces are present. The container can be used as storage tank for water, manure, AHL, ASL, seepage juice, rapeseed oil, rain collection tank, fire water tank, water tank, water tank, etc.. Price upon request. Transport can be arranged at low cost. Also we can modify the tank to suit your demands, just ask us. It is not possible to update all our advertisements daily. Since our inventory is changi ...

250 kW, max. 10.0 bar, 35.88 m3/min.

250 kW, max. 10,0 bar, 35,88 m3/min.

12 cylinder diesel engine SACM-AGO, Jeumont cutter generator AC630 L4, 2,500 KVA, water-cooled, incl. control cabinets, incl. 4 large fans, incl. additional parts 1 unit complete and 1 piece (not complete) additionally as spare part carrier Year of construction is estimated

Vecoplan Type: VAZ 300/250 UNF, Shredder Built: 1996 Dimensions and weights Machine weight Kg: 24000 Other Drive power 200 KW Rotor diameter 620mm Rotor width 2491 mm Speed 150 1/min Throughput line about 4000kg/h

Standard equipment Manual heavy duty band saw machine with hydraulic Sawframe reduction for miter cuts from 45 ° left to right 65° Saw frame made of sturdy cast iron construction Massive round table Oil bath gearbox consisting of bronze wheel with hardened and ground steel worm Carbide Guide and adjustable roller bearings Quick clamping Vice with additional quick adjustment and quick release lever Electric high-performance Coolant pump Mechanical blade tension with electric blade monitoring Control tool Free delivery including packaging

Cartons for standing products

Manufacturer Krauss Maffei Type KM 250-1200 B Control MC 3 Built in 1990 Closing unit Closing force t 250 Opening path mm 820 Holm size mm 630 x 560 Installation height min/max mm 330 Plate size 900 x 830 Spraying unit Screw diameter mm 60 Spray volume cm3 678 Spray weight gr 610 Spray pressure bar 1778 Dimensions and weights Dimensions LxWxH m 8.28 x 2.24 x 2.35 Machine weight Kg 12600 Other

Vecoplan S Type: VAZ 300/250 UNF, Shredder Built: 1996 Dimensions and weights Machine weight Kg: 24000 Other Drive power 200 KW Rotor diameter 620mm Rotor width 2491 mm Speed 150 1/min Throughput line about 4000kg/h

Material: stainless steel Engine: 7,5 kW Convey length: 2850 mm Convey width: 500 mm Very good condition. You can also get the entire system with all components.

Complete boiler system Weiss Year of construction - 1989 Power - 2500 kW For very wet chips incl. bark Water content - about 12500 l Water temperature - 120 degree Automatic chips infeeding with walking floor Movable sliding floor Day storage tank Automatic hydraulical ash removal Cyclon for dust separation Complete controling system Well maintained, excellent condition

250 kW, max. 10 bar, 37.60 m3/min, oil-free, water-covered.

250 kW, max. 10 bar, 37,60 m3/min, oil-free, water cooled.

Material: stainless steel Engine: 57 / 40 kW Weight: 7500 kg Length x Width x Height: 2900 mm x 1650 mm x 2000 mm Nominal volume : 2500 ltr. Working pressure : 5 bar electric input power : 380 volt / 50 hertz. Machine with withdrawable mixing device. You can also get the entire system with all components you need. Write us below!

CNC-controlled flatbed cutting machine Satronik DS 2500 double-sided. synchronized rack-and-pinion pinion drive in laeng axle game-free timing belt drive in transverse axis, drive system with 3 drive motors working width: 2500 mm Total width: 4000 mm feed: 0 -12000 mm/min 1 x Autogen 1 x Plasma (option) CNC 801 CNC web control CNC 801 - driving control unit/user interface SATO PLC - 80486 Simple and over-the-top menu for programming control panel with large-scale touch switches for all machine functions CPU 80486 DX4 32 Bite CPU/75MHz 10.4 LCD screen Essi format (ISO 6582) Floppy drive 3.5, 1.44 MB (default) 2 pcs. Interfaces V 24 (RS 232C) Flash memory for operating system and 512K for user programs 4 MB memory function list (excerpt) 54 Standard shapes Graphically underscored part programming Programmable cutting joint display of the plate sizesize plate r ...

1-impulse unity 125to ./1 Loose unity 125to.

Pierce Control Automation RUR 2500 P working range: 2.1 m x 6.1 m control: Burny 10 LCD Completely welded portal construction without screwed connections o linear guide in the transverse axis o AC servomotors (12 000 mm/min.) o Digital synchronization on the laeng axis o CNC control system BURNY 10 LCD Plus with touch screen o membrane keyboard o flyingmounted cutting buttons o Automatic initial adjustment of the plasma torch o voltage monitoring of the plasma torch height o 1 torch parking lot outside the cutting area o circuit breaker at the end of all axes 1 x Plasma Kjellberg 160i with manual gas console cutting up to 25mm qualifying cut Optional autogencan Completely factory-assembled machine assembly and commissioning ready for use

The CNC-controlled autogen/plasma cutting machine RUR 2500GP is a completely welded portal construction without screwed connections with linear guides in the transverse axis and digital synchronization in the laeng axis. The HPR260XD plasma system is suitable for use in sheet thicknesses up to 64 mm. The system delivers a high-quality cutting quality, high productivity and reliance with low operating costs. Equipment: ? CNC control system Pierce-19 with 19 touchscreen ? Energy chains with cables and loops ? A motorized plasma torch with automatic initial setting and burner ? Pneumatic anti-collision system ? Plasma cutting unit HPR260XD for cutting structural steel up to a material thickness of 64 mm, hole piercing up to 38 mm, beard-free cut up to 32 mm, manual gas console ? Two three-burner autogenschraegschneidkoepfe with electrical finishing and burner attachment control for  ...

Engel Injection Moulding Machine Type: IT 1300/250-HL SAINT CONTROL: CC 100 Year: In 1997 Clamping unit Clamping force t: 250 Opening stroke mms: 850 installation height min / max. mm: 350 Mould fixing platen size h x v: 1050 x 650 Injection unit Screw size mms: 60 Injection shot weight in Polysterol gr: 661 Injection volume cm?: 735 Injection pressure increased cash: 1480 Size and weight dimension HxWxD m: 6.9 x 2 x 2.1 Totally weight kg: 22000

The CNC-controlled autogen/plasma cutting machine RUR 2500GP is a completely welded portal construction sizing without screwed connections with linear guides in the transverse axis and digital synchronization in the laeng axis. The HiFocus 280i plasma system is suitable for use in the sheet thickness range of 0.5 - 50 (70) mm. As a soft switch inverter, HiFocus 280i offers a fully electronic power source for the power range up to 280 A. The system provides the best cutting results in the field of laser-like cuts and offers a higher service life of the wear parts. Equipment: ? CNC control system Pierce-19 touchscreen ? Energy chains with cables and loops ? A motorized plasma torch with automatic initial setting and burner ? Pneumatic anti-collision system ? Plasma cutting unit HiFocus 280i for cutting structural steel with recommended material thickness of 0.5 - 50 mm, punching up  ...

The CNC-controlled plasma cutting machine RUR 2500P is a completely welded portal construction without screwed connections with linear guides in the transverse axis and digital synchronization in the laeng axis. The HiFocus 161 i plasma system from Kjellberg with Contour Cut is suitable for use in the sheet thickness range of 0.5 - 40 (50) mm. As a soft switch inverter, HiFocus 161 i offers a fully electronic power source for the power range up to 160 A. The system is the multi-talent of plasma cutting technology for marking and cutting construction blades, alloyed steels, aluminium and all electrically conductive materials. (see Pdf ) Equipment: ? CNC control system Pierce 19 with touchscreen ? A motorized torch with automatic initial setting and burner ? Plasma cutting unit HiFocus 161 i for cutting structural steel with recommended material thickness of 0.5 - 38 mm, hole bars up  ...

Engel hose pouring machine type: IT 1300/250 control: CC 90 construction year: In 1991 Schliesseinheit Schliesskraft t: 250 opening ways mm: 600 cross-beam measure mm: 635 x 635 installation heights min / max. mm: 200 / 600 record size: 200 / 600 hose unity snail diameter mm: 60 hose weights gr: 735 hose volumes cm?: 661 hose pressure cash: 1500 mass and weights machine weight kg: 12500 other Euromap 12 angels Robot

intake opening: 2,500 x 2,000 mm rotor flight circle: 580 mm each rotor execution: special teeth motor power: 2 x 90 kW with planet gears weight: approx. 18,500 kg

ZENO double roller vorader ZDV 2500x2000, mobile on chain suspension, with discharge conveyor and magnetic separator, drive power 298 kW, 1900 rpm, MTU diesel engine, rotor flight circuit 575 mm, 2 x 12 rotor tools on tool holders, new design demonstration machine. ZENO Twin rotor shredder ZDV 2500x2000, mobile on chain chassis, incl. discharge conveyor and magnet separator, motor power 298 kW, 1900 rpm, MTU diesel motor, rotor flight circle 575 mm, 2 x 12 cutting inserts on tool holder, show machine.

intake cross section: 2500 x 1,700 mm motor power: 160 kW rotor flight circle: 670 mm rotor execution: cutting inserts on tool holders counterknife: with cut gap adjustment machine weight: approx. 24,000 kg

Air screw compressor Atlas Copco ZR 250 oil-free 250 kW, 10 bar, 37.6 m3 rpm. water-cooled

Rotary screw air compressor Atlas Copco ZR 250 oil-free 250 kW, 10 bar, 37,6 m3/min. water cooled

Rotary screw air compressor Atlas Copco ZR 250 oil-free 250 kW, 10 bar, 37,60 m3/min. water cooled

Air screw compressor Atlas Copco ZR 250 oil-free 250 kW, 10 bar, 37.60 m3/min. water-cooled