We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
119,301 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
Magnetic plate, permanent magnetic lathe chuck NAREX Type: PERMAG K 250 Working surface: Ø 250 mm height: 90 mm Flange ( rear ): Flange diameter: Ø 215 / 250 mm bolt circle diameter: Ø 231 mm 3x threaded hole: M10 x 1.5, depth: 15 mm used, tested ! Dimensions: 250 x 250 x 90 mm
used
Magnetic plate, permanent magnetic lathe chuck NAREX Type: PERMAG K 250 Working surface: Ø 250 mm height: 90 mm Flange ( rear ): Flange diameter: Ø 215 / 250 mm bolt circle diameter: Ø 231 mm 3x threaded hole: M10 x 1.5, depth: 15 mm New ! Dimensions: 250 x 250 x 90 mm
used
Dividing head with three-jaw chuck WMW Ø 250 mm Motor 1: Type 1213WSM2.85.08 52 - 172 V DC, 26 A Motor 2: Type MA 14 F130 - 4A 0,37 kW 220 / 380 V 3AC Three-jaw chuck: hole diameter: Ø 80 mm, not continuous ! hole depth: 70 mm flange ( dividing head ): Ø 190 mm bolt circle diameter: Ø 160 mm 4x threaded hole: M16 x 2.0, depth: approx. 20 mm center height: 240 mm hole diameter ( dividing head ): Ø 120 mm, not continuous ! used, tested ! Dimensions ( without eyebolts ): 1000 x 800 x 425 mm
used
3-jaw chuck, three-jaw chuck, lathe chuck PAGUS Ø 250 mm outer Ø: 250 mm height with jaws: 140 mm bore: Ø 80 mm bolt circle diameter: Ø 230 mm flange diameter: Ø 210 mm ( inside ) with chuck wrench ! used, checked! Dimensions ( lathe chuck ): 245 x 245 x 170 mm
used
Dividing head with 3 jaw chuck and centering point TOS DU-250 AS ( DU-250AS ) Ø 125 IU 125 M 1- 1 max 4500 rpm center height 135 mm used, tested ! Dimensions 600 x 400 x 320 mm
used
Clamping plate, clamping table, machine table, T-slot plate DECKEL Working area: 700 x 250 mm for KF12 plate thickness: 60 mm groove width: 12 / 21 mm used, tested ! Dimensions: 700 x 250 x 60 mm
used
Clamping table, clamping plate, machine table STANKO Clamping table 1100 x 250 mm groove width: 25 / 14 mm groove depth: 25 mm spare part for milling machine STANKO 6N81G ! used, tested ! Dimensions: 1100 x 280 x 100 mm
used
Round Dividing Table, Rotary Table, Circular Dividing Table PAGUS Ø 250 mm Table height: 98 mm Slot width: 14 / 25 mm Groove depth: 23 mm used, tested ! Dimensions: 400 x 350 x 100 mm
used
tilting table, clamping table, sinusoidal table PAGUS clamping area: 250 x 180 mm approx. 90° tiltable 2 grooves 10 / 18 x18 mm 1 groove 14 x 5 mm base plate: 200 x 180 mm groove in base plate: 16 x 5 mm used, tested ! Dimensions: 300 x 250 x 80 mm
used
Tilting table, clamping table, sinusoidal table PAGUS Clamping area: 250 x 180 mm approx. 120° tiltable 2 grooves 10 / 18 x18 mm Base plate: 250 x 180 mm Groove in base plate: 14 x 5 mm used, tested ! Dimensions: 320 x 180 x 85 mm
used
Machine vice STANKO / BZSP (Made in USSR) Model: 7200-0225 Jaw width: 250 mm jaw height: 80 mm wingspan: 10 - 350 mm on turntable with graduation 360° rotatable used, tested ! solid design ! Dimensions: 670 x 450 x 225 mm
used
3-jaw chuck, three-jaw chuck, power chuck, wedge hook chuck WMW type: DKRD A2/8-250x3 ( DKRDA2/8-250x3 ) outer Ø: 250 mm bolt circle Ø : 224.5 mm height with jaws: 180 mm bore: Ø 51 mm Jaws individually adjustable by toothing used, checked ! Dimensions: 250 x 250 x 180 mm
used
3-jaw chuck, three-jaw chuck, power chuck, wedge hook chuck WMW Type: DKRF B/8-250x3 ( DKRFB/8-250x3 ) Outer Ø: 250 mm bolt circle Ø : 171.5 / 224.5 mm height with jaws: 182 mm bore: Ø 51 mm Jaws individually adjustable by toothing used, tested ! Dimensions: 250 x 250 x 190 mm
used
Machine vice PAGUS Jaw width: 200 mm jaw height: 60 mm Wingspan: 0...250 mm on table with graduation 360° rotatable used, tested ! Dimensions: 550 x 375 x 190 mm
used
Rotary table, round dividing table, circular dividing table PAGUS Ø 250 mm Table height: 115 mm slot width: 12 / 20 mm Slot depth: 22 mm Centering hole in table: Ø 23 mm A drive shaft with spline shaft profile: Ø 13 / 17 mm, 4 wedges, wedge width: 4 mm used, checked! Dimensions: 500 x 450 x 155 mm
used
3-jaw chuck, three-jaw chuck, power chuck, wedge hook chuck WMW Outer Ø: 250 mm bolt circle Ø : 132.5 mm height: 135 mm (without screws) bore: Ø 51 mm jaws individually adjustable by toothing ! used, checked ! without jaws ! Dimensions: 250 x 250 x 190 mm
used
Machine vice STANKO / BZSP (Made in USSR) Model: 7200-0225 Jaw width: 250 mm Jaw height: 80 mm Wingspan: 0 - 350 mm on turntable with graduation 360° rotatable can be clamped on both sides ! a slotted hole for fastening is damaged !; used, checked! solid design ! Dimensions: 700 x 355 x 235 mm
used
Machine vice STANKO / BZSP (Made in USSR) Model: 7200-0225 Jaw width: 250 mm Jaw height: 80 mm Wingspan: 0 - 350 mm on turntable with graduation 360° rotatable New ! solid design ! Dimensions: 670 x 345 x 215 mm
used
Machine vice WMW jaw width: 250 mm jaw height: 75 mm wingspan: 0...300 mm on table with graduation 360° rotatable used, tested ! Dimensions: 640 x 320 x 210 mm
used
Tool holder for threaded screw-in milling cutters POKOLM 250 16 750 SK 40 thread M16 usable length: 250 mm conical design inner coolant supply used, tested ! Dimensions: 338 x Ø 64 mm Dimensions (packed): 350 x 70 x 70 mm
used
Clamping device with 3-jaw chuck, three-jaw chuck RÖHM outer Ø: 250 mm height with jaws: 155 mm bore: Ø 75 mm used, tested ! Dimensions: 355 x 290 x 160 mm
used
Bearing block, counter bearing for milling spindle WMW, AUERBACH FU 250 x 1000 Ø 32 mm Distance spindle center - upper edge dovetail: 150 mm dovetail guide: 184 / 140 mm, height: 44 mm, width: 65 mm spare part for milling machine AUERBACH FU 250 x 1000 ! used, tested ! Dimensions: 310 x 82 x 225 mm
used
tilting table, clamping table, sinusoidal table PAGUS clamping surface: 250 x 180 mm table height: 82 mm approx. 80° tiltable groove width: 10 / 18 mm groove depth: 17 mm Base plate: 250 x 178 mm Mounting holes in footplate: 2x Ø 14 x 20 mm ( U-shape ), 4x Ø 12 x 14 mm ( U-shape ) used, tested ! Dimensions: 295 x 200 x 85 mm
used
tilting table, clamping table, sinusoidal table PAGUS clamping surface: 250 x 180 mm table height: 78 mm approx. 50° tiltable groove width: 10 / 18 mm groove depth: 17 mm Base plate: 305 x 180 mm Mounting holes in base plate: Ø 14 x 20 mm ( U-shape ) used, tested ! Dimensions: 305 x 230 x 80 mm
used
Round table, round dividing table, circular dividing table PAGUS Ø 250 mm Table height: 100 mm Slot width: 14 / 24 mm Groove depth: 23 mm Centering hole in table: Ø 20 mm Mounting holes in base plate: Ø 15 x 24 mm ( U-shape ) used, checked! Dimensions: 400 x 350 x 100 mm
used
3-jaw chuck, three-jaw chuck, lathe chuck WMW NILES outer Ø: 250 mm bore Ø:80 bolt circle: 180 mm flange: 220 mm height with jaws: 110 mm 2400 rpm with cross cone and camlock D1- 8 inch (stud M 16) 2 set of jaws (1x drill 1x rotary jaw set) 1 chuck wrench Dimensions: 250 x 250 x 195 mm
used
Dividing head, dividing head, dividing table, with tailstock and fixed tip TOS Type DU 250AS Center height 135 mm Tool holder (spindle ): SK 40 360° rotatable -10° - +100° tiltable diameter (clamping plate): Ø 160 mm groove width: 12 / 24 mm groove depth: 20 mm New ! Dimensions: 650 x 460 x 280 mm
used
Pneumatic cylinder, double-acting, with position sensors REXROTH MECMAN PNEUMATIK 523-111-032-0 stroke: 250 mm Rod diameter: Ø 12 mm pmax: 10 bar New ! Dimensions: 400 x 50 x 50 mm
used
Pneumatic cylinder ORSTA Pn1A 100x250 B TGL 20747/02 Piston diameter: Ø 100 mm Rod diameter: Ø 25 mm stroke: 250 mm New ! Dimensions: 510 x 125 x 125 mm
used
Double column press - hydraulic WEMA ZEULENRODA PYZ 250 Year: 1987 Control type: conventional Pressure: 250 t Passage width: 1280 mm stroke: up to 500 mm table: 1250 x 1000 mm installation height: 800 mm Passage in the side stands: 520 x 750 mm Table height above floor: 1000 mm total power requirement: 47 kW with thermoforming device machine fits in 40 ́foot coontainer Dimensions: 2200 x 1850 x 4600 mm
used
Vacuum pump BUSCH type 250-136 item no.: 32016 vacuum: 2 mbar connections: 2 ( inches ) motor: LEROY SOMER LS132M0 7,7,5 kW 1470 rpm 230 / 400 V 3AC 50 Hz IP55 Obsolete ! Dimensions: 1250 x 600 x 900 mm
used
Submersible pump, coolant pump BRINKMANN TB 250/200-09 Immersion depth: 210 mm Pump base Ø: 140 mm pump flange Ø: 190 mm Q = 280 l/min engine: 0,63 KW 220 / 380 V Dimensions: 430 x 260 x 190 mm
used
Centrifugal pump, water pump, KSB KWPKA 80-250 Q: 27.8 l/sec. ( 100 m3/h ) H: 20 m Intake side: Internal diameter: Ø 100 mm Flange diameter: Ø 160 / 210 mm pressure side: Internal diameter: Ø 80 mm Flange diameter: Ø 1 1 40 / 200 mm Engine: SIEMENS 1LA5163-4GA70 11 kW 1455 rpm 380 / 660 V 3AC 50 Hz New ! Dimensions: 1270 x 600 x 600 mm
used
volute casing pump, water pump, centrifugal pump KSB SEWATEC D 250-400 G year 2010 Q: 1152 m3/h at 16,15 m Q: 601 - 1450 m3/h H: 25.30 - 10.33 m Engine: 75 kW 400 / 690 V New ! Dimensions: 2800 x 900 x 1200 mm
used
volute casing pump without motor, water pump, centrifugal pump KSB ETANORM R M 200 - 250 Q: 201.32 - 699.89 m3/h H: 13.54 - 6.04 m Required power : 15.88 - 16.49 kW design speed: 1450 rpm New ! Dimensions: 1100 x 750 x 710 mm
used
Centrifugal pump, magnetic drive pump, water pump FRIATEC AG RMKN 65/250 Q = 120 m3/h H = 60 m Motor SIEMENS: 55 KW, 2970 U / m 400 / 690 V New ! Dimensions: 1650 x 750 x 730 mm
used
Submersible pump RITZ 50-250.2/VDK4 Q. 50 m3/h H: 90 m Immersion depth: 620 mm Lid: 780 x 545 mm Engine: 22 kW 2935 rpm 380 - 420 V used, tested ! Dimensions: 1450 x 800 x 560 mm
used
volute casing pump, water pump, centrifugal pump KSB SEWABLOC K 50-250 GH year 2010 Q: 18 m3/h H: 6,6,0 m Engine: SIEMENS 1LA7106-6AA61-Z 1,5 kW 400 / 690 V 3AC used, tested ! Dimensions: 840 x 330 x 400 mm
used
volute casing pump, water pump, centrifugal pump KSB SEWABLOC K 50-250 GH built 2010 Q: 18 m3/h H: 6,6,0 m Engine: SIEMENS 1LE10011AC422GB4-Z 1,5 kW 230 / 400 V 3AC used, tested ! Dimensions: 870 x 330 x 440 mm
used
volute casing pump, water pump, centrifugal pump KSB SEWABLOC K 50-250 GH built 2011 Q: 18 m3/h H: 6,6,0 m Engine: SIEMENS 1LE10011AC422GB4Z 1,5 kW 230 / 400 V 3AC used, tested ! Dimensions: 870 x 330 x 440 mm
used
peristaltic metering pump, peristaltic pump, without hoses PETRO GAS EQUIPMENT BERLIN 2501-RExV/110 speed: 0 - 110 rpm Pump head: WATSON-MARLOW 501-RL variable gearbox: PLANETROLL Type: 0,12D4(Ex)AR1-1P1-5 Engine: SIEMENS 1 MA 5060-4CB42 ( 1MA5060-4CB42 ) 0,12 kW 1310 rpm 230 / 400 V 3AC approx. 3.0 m connection cable used, tested ! Explosion-proof ! Dimensions: 440 x 220 x 490 mm
used
float switch, level switch, level monitor, level switch SAXONIA SCHWARZENBERG 24 - 250 V 2 switching points immersion depth: 170 mm flange Ø 60 mm float: plastic, colour: red level switch for central lubrication !; New ! Dimensions: 220 x 110 x 90 mm
used
float switch, level switch, level monitor, level switch SAXONIA SCHWARZENBERG 24 - 250 V 2 switching points immersion depth: 170 mm flange Ø 60 mm float: plastic, colour: white level switch for central lubrication ! New ! Dimensions: 220 x 110 x 90 mm
used
float switch, level switch, level monitor, level switch SAXONIA SCHWARZENBERG 24 - 250 V 2 switching points Immersion depth: 170 mm flange Ø 60 mm float: brass level switch for central lubrication ! New ! Dimensions: 220 x 110 x 90 mm
used
float switch, level switch, level monitor, level switch SAXONIA SCHWARZENBERG 24 - 250 V 1 switching point Immersion depth: 110 mm flange Ø 60 mm float: plastic, colour: red level switch for central lubrication !; New ! Dimensions: 170 x 110 x 90 mm
used
float switch, level switch, level monitor, level switch SAXONIA SCHWARZENBERG 24 - 250 V 1 switching point immersion depth: 110 mm flange Ø 60 mm float: plastic, colour: white level switch for central lubrication ! New ! Dimensions: 170 x 110 x 90 mm
used
Centrifugal bucket set for steel gravel blasting machine GISAG PDS 2500 Dimensions(one bucket): 160 x 50 x 17 mm Thickness without side edge: approx. 12 mm bore: Ø 11 mm spare part e.g. for GISAG PDS 2500/3 ! centrifugal shovel set consists of 8 pieces New ! Dimensions: 160 x 160 x 50 mm
used
Refrigeration unit, oil cooler for machine tools HABOR OILCON HB0-250PT Refrigeration compressor: 220 V 1 AC, 250 W Fan: 220 V 1AC, 46 W pump: 220 V 3AC, 220 W Total power: approx. 0.0.52 kW 220 V 3AC 50 / 60 Hz used, tested ! Dimensions: 450 x 440 x 1100 mm
used
Industrial gas spring, shock absorber ACE GS-19-100 GS-19-100-AA-250N-K37712 A11-32530 < /br />Extension force: 250 N stroke: 100 mm rod: Ø 8 mm Shock absorber body: Ø 19 Thread: M8 Material: stainless steel ! New ! Dimensions: 285 x 20 x 20 mm
used
Radiator, heat exchanger, oil cooler ASAHYDRAULIK ILLEC07 270 x 250 x 70 Net dimensions: 270 x 250 mm Main connections: G 1 ( inch ) hole spacing 1: 292 / 174 mm hole diameter: Ø 9 x 11,5 mm ( slotted hole ) hole spacing 2: 268 / 155 mm hole diameter: Ø 6.5 x 9.5 mm ( slotted hole ) 3x threaded hole: M8 x 1.25, depth: 15 mm Material: aluminum New ! Dimensions: 380 x 310 x 70 mm