zeva austria maschinen used for sale

x-travel: 550 mm y-travel: 410 mm z-travel: 450 mm b-axis: +110/-110 ° spindle turning speed range: -15000 U/min spindle taper: BT Big Plus 40 tool change unit: 40x size of pallet: 2x D-250 mm weight of the machine ca.: 8.6 t 5 axes machining center FANUC G-Tech 30i Coolant through spindle 3D measuring probe Tool measuring device Misc pallets Misc tool holders More details on www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

centre height:500 mm centre distance:2000 mm control:CNC Grundig Numerik total power requirement:400 V, 50 Hz, 22,5 kW weight of the machine ca.:3300 kg dimensions of the machine ca.:2500 x 4000 x 2400 mm

ZEMAN corrugator production line Line for the production of corrugator ZEMAN VEB 1500x16000-T, production in Austria, working, taken out of service. year of production 2006. cost is negotiable.

For sale is the following article: Cutting mill Profile mill Möser 30 KW, Throughput: up to 250kg/h (depending on plastic and parts) Manufacturer: Möser Accessories: silo/cyclone, 1 suction blower, 3-4 perforated screens (8-10mm grain size), 2 sets of knives, control cabinet for switching on and off. Complete pipe system More information about the dimensions and technical information on request. optical condition according to photos - used - fully functional Mill is still built and connected to electricity. You are welcome to look at them and try them out. Pick-up by arrangement and dismantling possible promptly.

Belt Strapping Machine Strap Strapping Device Manufacturer Mosca Verpackungstechnik Maschinenfabrik Gerd Mosca GmbH 69429 Waldbrunn Type RO-TR500-4 Year of construction 2001 Current connection 3 AC 400 Volt Current consumption 1.5kW 50Hz 2.5A PLC Siemens Simatic OP7 The machine can work both manually and automatically. The conveyor belt brings the packaged goods to the right place and the machine then strapping. Operating states Machine An automatic Open a frame Cut off tape

Number of sanding units: 2 St. sanding width: 190 mm Sanding height max.: 2-180 mm LÖWER-Doppelseitige Schleifmaschine DSM 2000 Doppelseitige Einzelholzschleifmaschine zum Schleifen von Massivholz wie z.B. Fensterhölzern etc. Stabile Top-Aus- führung mit langen Gußtischen, Bürst- und Finisheinrichtung und Transportbandvorschub. Geeignet für hohe Dauerbelastung auch bei höheren Spanabnahmen. - versetzt angeordnete Schleif- und Finishaggregate oben und unten - direkt angetriebene gummierte Schleifrollen für schlupffreie Kraftübertragung - Kombischliff über Rolle und Schuh für hohe Spanabnahmen bei gleichzeitig ebener Eingriffszone - wartungs- und verschleißfreie CERMET-beschichtete Schleifschuhe mit sehr guter Wärmeleitfähigkeit und absoluter Maßhaltigkeit - Fremdkühlung der Schleifzonen für einen kühleren Schliff und höhere Schleifbandstandzeiten - zwangsgeführte pneu ...

turning diameter over bed: 570 mm turning diameter over slide rest: 365 mm turning length: 1500 mm centre distance: 1800 mm spindle turning speed range: 11-2240 U/min spindle bore: 62 mm weight of the machine ca.: 4 t Misc accessories More details on www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

drill diameter: 2-40 mm drilling length: x mm lip angle: 40-180 ° weight of the machine ca.: 0.4 t Dressing device Point thinning attachment More details on www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 200 mm turning length: 635 mm control: SIEMENS 840D Powerline greates pass round over bed: 250 mm spindle turning speed range: 20-7000 U/min turret head: 2x 12 weight of the machine ca.: 10 t Y- & B- axes Misc. accessories more details on www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: X t table-size: 550x390 mm throat: 550 mm magnetic plate size: 250x100 mm weight of the machine ca.: 0.25 t More details on www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. grinding diameter: 250 mm grinding length: 600 mm workpiece length: 780 mm table-size: 1030x214 mm spindle turning speed range: 2000-6000 U/min weight of the machine ca.: 1.2 t Hydraulic execution Universal dividing head Relief grinding attachment Helical grinding attachment Lots of accessories www.marcels-maschinen.c The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding wheel diameter: 300 mm no. of working stations: 2 Stück total power requirement: 1,1 kW weight of the machine ca.: 0.2 t 1x Cup wheel diameter 300mm 1x tangential wheel 260x50mm Drill sharpening device More details on www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding wheel diameter: 300 mm no. of working stations: 2 Stück total power requirement: 0.75 kW weight of the machine ca.: 0.2 t With dust exhauster More details on www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 6000 mm y-travel: 1000 mm z-travel: 1200 mm table-size: 6400x1000 mm tool change unit: 80x spindle taper: HSK A100 spindle turning speed range: 45-9000 U/min total power requirement: kW weight of the machine ca.: 48 t dimensions of the machine ca.: 12x4.3x4.5 m SIEMENS 840D 4th axis B-Axis +/-90° Spindle coolant through spindle Tool measuring device www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding length: 400 mm grinding width: 250 mm workpiece height: 375 mm grinding wheel diameter: 300 mm weight of the machine ca.: 2.9 t Magnetic plate 400x250mm www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 450 mm y-travel: x mm z-travel: x mm grinding wheel diameter: 175 mm weight of the machine ca.: 0.2 t Turning tool holder Dividing head with collets Table support D-140mm www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding length: 600 mm grinding width: 500 mm workpiece height: 500 mm table-size: 800x400 mm table speeds: 1-35 m/min grinding wheel diameter: 400 mm spindle drive: 11 kW weight of the machine ca.: 4.5 t SURFACE % PROFILE GRINDING MACHINE magnetic plate 600x300mm Dresser on table Exhausting device More details on www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 300 mm y-travel: 135 mm z-travel: 300 mm spindle turning speed range: 100-2000 U/min table-size: 590x210 mm weight of the machine ca.: 0.6 t Digital read-out 3 axes www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 25 mm x-travel: 500 mm y-travel: 260 mm cross-moving table: 880x320mm spindle turning speed - stepless: 100-9000 U/min control: HEIDENHAIN TNC310 vertical movement: 480 mm quill stroke: 160 mm weight of the machine ca.: 2.2 t Misc accessories www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding wheel diameter: 400 mm no. of working stations: 1 Stück total power requirement: 1,7 kW weight of the machine ca.: 0.4 t With coolant system More details on www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 65 mm throat: 390 mm bore stroke: 250 mm spindle taper MT: 5 table-size: 880x670 mm spindle turning speed - stepless: 40-800 U/min weight of the machine ca.: 1.2 t www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 500 mm y-travel: 350 mm z-travel: 380 mm table-size: 790x360 mm spindle turning speed range: 63-4000 U/min weight of the machine ca.: 1.8 t Active Digital read out Misc.accessories www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

working length: 150 mm working width: 100 mm height adjustment: 270 mm weight of the machine ca.: 0.180 t Marking machine With automatic dividing head With vice More details on www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 400 mm plate thickness: 4 mm weight of the machine ca.: 0.3 t dimensions of the machine ca.: 0.5x1x2.2 m www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 127 mm x-travel: 2000 mm y-travel: 1000 mm vertical movement: 1300 mm table-size: 1400x1250 mm weight of the machine ca.: 20 t Digital read-out Universal milling head Face plate Misc accessories www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 320 mm turning length: 400 mm control: FANUC 21i-T swing diameter over face slide: 165 mm number of spindle speeds: 50-4500 weight of the machine ca.: 3 t www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 850 mm y-travel: 500 mm z-travel: 450 mm table-size: 1250x500 mm spindle taper ISO: 50 spindle turning speed range: 35,5-1800 U/min weight of the machine ca.: 5.2 t HEIDENHAIN TNC-355 Misc accessories www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding wheel diameter: 150x25 mm no. of working stations: 2 Stück total power requirement: x kW weight of the machine ca.: 0.002 t More details on www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding length: 1000 mm grinding width: 500 mm workpiece height: 630 mm table-size: 1000x400 mm grinding wheel diameter: 400 mm weight of the machine ca.: 5.8 t Magnetic plate 1000x500mm www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 520 mm y-travel: X mm z-travel: X mm weight of the machine ca.: 0.2 t Dividing head with collets www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 840 mm turning diameter over slide rest: 550 mm turning length: 4000+2000 mm weight of the machine ca.: 9 t Adjustable base +2000mm electrical Lots of accessories www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 370 mm plate thickness: 0-2 mm work piece width: x mm weight of the machine ca.: 0.2 t dimensions of the machine ca.: 0.6x0.4x1.1 m Dressing device Exhausting device www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 910 mm turning diameter over slide rest: 670 mm turning length: 3000 mm turning dia. in gap: 1200 mm spindle turning speed range: 7-800 U/min weight of the machine ca.: 5.3 t dimensions of the machine ca.: 5x1.6x1.7 m Misc.accessories www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 400 mm plate thickness: 4 mm total power requirement: x kW weight of the machine ca.: 0.2 t dimensions of the machine ca.: 0.7x1x2 m www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

workpiece length: x mm work piece width: x mm workpiece height: x mm table-size: 200x110 mm grinding height: 230 mm cup wheel dimensions: 150 mm weight of the machine ca.: 0.13 t dimensions of the machine ca.: 0.6x0.6x1.5 m Magnetic table D-125mm Dressing attachment www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding length: 800 mm grinding width: 500 mm workpiece height: 480 mm table-size: 800x400 mm weight of the machine ca.: 3.4 t Magnetic plate 800x400mm www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

width of the strips: 50 mm band length: x mm band speed: x m/min speeds: 1800-3600 U/min total power requirement: 5.5 kW weight of the machine ca.: 0.6 t 1x Belt 1x Polishing www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 63 t distance between columns: 360 mm stroke: 400 mm weight of the machine ca.: 4 t dimensions of the machine ca.: 1.8x1.6x2.7 m www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. grinding diameter: x mm grinding length: 120 mm workpiece length: 270 mm table-size: 270x80 mm weight of the machine ca.: 0.2 t dimensions of the machine ca.: 0.8x0.7x1.4 m Dividing head Collet set Coolant MORE DETAILS ON www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 600x400 mm table height: x mm table load: x t www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

length: 760 mm width: 700 mm height: 1500 mm Several executions PICTURES AND MORE INFORMATION ON www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 75 mm x-travel: 800 mm y-travel: 1300 mm vertical movement: 1000 mm spindle taper MT: 5 spindle turning speed range: 14-1500 U/min table-size: 1000x850 mm weight of the machine ca.: 6.7 t Misc accessories www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 1020 mm y-travel: 540 mm z-travel: 540 mm table-size: 1120x540 mm spindle taper:: BT40 spindle turning speed range: -8000 U/min tool change unit: 24x weight of the machine ca.: 5.2 t SIEMENS 810D Shopmill With NC dividing head HEIDENHAIN TS27 Measuring system HEIDENHAIN MP12 Measuring probe Misc accessories www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 1200 mm y-travel: 350 mm z-travel: 350 mm table-size: 1800x405 mm spindle taper ISO: 50 spindle turning speed range: 30-1800 U/min weight of the machine ca.: 4.4 t Misc accessories www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 710 mm y-travel: 500 mm z-travel: 500 mm table-size: 1080x580 mm spindle taper: SK40 spindle turning speed range: 10000 U/min tool change unit: 30 weight of the machine ca.: 10 t HEIDENHAIN TNC430 Coolant through spindle www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 300 mm y-travel: 150 mm z-travel: 340 mm table-size: 600x260 mm spindle taper ISO: 40 spindle turning speed range: 40-2000 U/min weight of the machine ca.: 0.7 t Visit us on www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): x mm bore capacity in steel (diameter): x mm throat: x mm throat: x mm bore stroke: x mm bore stroke: x mm POLYHEDRAL DRILLING MACHINE Drilling range: -Square: Spanner opening 3-27mm -Hexagon: Spanner opening 3-32mm Drilling depth: -Square -14mm -Hexagon-13mm Throath150mm Misc accessories More details on www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding length: 650 mm grinding width: 450 mm workpiece height: 325 mm table-size: 600x350 mm grinding wheel diameter: 350 mm weight of the machine ca.: 2.7 t Magnetic table 600x400mm Misc.accessories www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

thread capacity: -M 3,5 thread pitch: x mm throat: 100 mm table-size: 180x180 mm weight of the machine ca.: 0.140 t www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding length: 500 mm grinding width: 250 mm workpiece height: 275 mm table-size: 500x180 mm weight of the machine ca.: 1.1 t Balancing device integrated Magnetic plate 500x200mm www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.