zeno gmbh used for sale

Block moulding machine with mixing plant for sale. The board paver of the manufacturer Zenith, type 860 AZ, built in 1988, has been in continuous operation at the same location. In addition to the stone paver, the entire production circuit and a production circuit and a complete mixing plant with 3 TEKA mixers (2x THZ1875 and 1xTHZ1125), year of construction 1985. The plant can be fully used after acquisition. The stone paver is still in operation until at least the end of September 2023 and can be inspected in production until then. Stone moulding machine: - Board paver from the manufacturer Zenith, type 860 AZ, year of manufacture 1988. - Production of core and facing - Control Simatic S 5 with visualisation from Zenith - Board size 1,400 x 950 mm - Maximum production height 14 cm - Pneumatic mould clamping Find more here - / Contact us at -

ZENO double roller vorader ZDV 2500x2000, mobile on chain suspension, with discharge conveyor and magnetic separator, drive power 298 kW, 1900 rpm, MTU diesel engine, rotor flight circuit 575 mm, 2 x 12 rotor tools on tool holders, new design demonstration machine. ZENO Twin rotor shredder ZDV 2500x2000, mobile on chain chassis, incl. discharge conveyor and magnet separator, motor power 298 kW, 1900 rpm, MTU diesel motor, rotor flight circle 575 mm, 2 x 12 cutting inserts on tool holder, show machine.

used shredder / shredder Manufacturer: ZENO Type: ZTLL 1600 x 1600 Year of construction: 2018 Operating hours: approx. 400 Specifications: Drive power: 2 x 55 kW Sieve: 35 mm hexagonal Screen design: solid screen basket, reinforced with ribs, including sieve quick-change device Counter knife: with cutting gap adjustment Hopper: 1,075 mm high, without lid with maintenance door and level sensor (Sonar Bero) Transmission: Compact gearbox with torque cut-off Filling opening: 1,600 x 1,600 mm Rotor speed: approx. 80 - 120 rpm Rotor aircraft: 600 mm Rotor design: 4 rows (76 pieces) positive inserts 60 x 60 mm on tool holders Rotor bearing: Standing bearing Machine floor and slide bottom: grooved Weight: approx. 13,400 kg Universally applicable shredder for a wide variety of materials The ZTLL shredder is the result of more than 35 years of kn ...

For sale is a used ZENO shredder ZTLL 740x900 with the following features: Manufacturer: ZENO Model: ZTLL 740x900 Condition: good Dimensions set-up: 1.70 x 1.80 x 2.60 m last operation: August 2023 Previous use: EPS shredding Electrical data: Control cabinet is wired to the machine Motor power: 15kW Hydraulic ag: 0.25 kW Other: Spare perforated grille 11x17 available, separate stairs to the hopper available; Availability: immediately or by appointment

High-performance fan Zenner, type VTZ 710/63/1 Sonder, built in 2014, consisting of control cabinet, frequency converter, cell airlock Specifications Manufacturer: Zenner Ventilatoren Type: VTZ 710/63/1 Sonder Year of Make: 2014 Volume: 4.72 m³/s Temperature mx.: 80°C Density: 1.2 kg/m³ Total pressure: 5,000 pa Speed: 2900 1/min Motor: 55 kW Voltage: 400/690 V / 50 Hz Weight: approx. 800 kg Remark: The fan is intended for transporting paper/cardboard. In the process, the material is also chopped. The machine is in good condition. It was inspected and tested by us in 28816 Stuhr. You can find the video on our website or our Youtube channel. Viewings, also under power, are possible at any time by arrangement. On request, we also carry out tests with your material for an expense allowance. We will also be happy to answer any questions you may have about the mac ...

Used Floor Pavers Manufacturer: Zenith Type: 941 II A Year of Make: 1978 Used traveller for concrete blocks, pavers Manufacturer: Zenith Type: 941 II A Year: 1978

gebr. Stone Forming Machine/Board Paver, Manufacturer Zenith Type 860 AZ Production of core & attachment Simatic S5 control system with vitalization from Zenith Board size 1,400 x 950 mm max. production height 14 cm Quick Forming Clamping Pneumatic incl. complete circuit with: Aerial ladder Vehicle Group Drying rack Countersunk ladder Stone Remover Packager Board stacking transverse transport Board stacking device Board tray Parcel trolley circulation Parcel Magazine Horizontal strapping

ZENO Disc Screen ZSS 1200 x 4200 Working width: 1200 mm working length: 4200 mm drive: 2 x 7.5 kW screen fraction: 0-80 mm disk diameter: Ø 350 mm

Used multi-layer paver Zenit 844 Built in 1993 inclusive: 1 piece concrete mixer 750 l Teka 1 piece concrete mixer 500 l approx. 12 pieces of used moulds approx. 100 production pallets Used concrete multilayer machine Manufacturer: Zenith Type: 844 Year: 1993 including: - 1 pcs 750 liter mixer Teka - 1 pcs 500 liter blender - about 12 moulds - about 100 pcs production boards

Kanalventilator Absaugung - Duct Fan ZENNER VTZ 560/50/2-W (Absaugung - Extraction) Baujahr / Year 2001 - Serial-No. 64.031 Volumenstrom / volume flow 2.21 m3/s Totaldruckerhöhung / total increase of pressure 3880 Pa Dichte / density 1.2 kg/m3 Drehzahl / Speed 2920 min-1 Kupplungsleistung / required performance 14.4 kW Temperatur / temperature max. 80°C Zum absaugen von Holzspänen oder Papierresten For vacuuming wood chips or paper residue Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

ZENO CMX 300 / NT 65 Mixing plant Type: CMX300 M.No.: 15A-6180Pos.25 Motor: 2x 30KW/55A Year of construction: approx. 2014 Weight: approx. 6000kg Dimensions: with access = L 5450 mm x W 3700 mm x H 1800 mm without access = L 3950 mm x W 1700 mm x H 1800 mm Conveyor belt: Type: NT 65 M.No.: 15A-6180Pos.24 Motor: 11KW/21A Year of construction: approx. 2014 Weight: approx. 5000kg Dimensions: with access = L 13000 mm x W 3300 mm x H 1500 mm without access = L 13000 mm x W 1300 mm x H 1500 mm Dl777x Mixer & conveyor belt are one component. Find more here - / Contact us at -

Manufacturer: Pilz Zentraleinheit C-P8-ZE-32, Type: 32 K, Model: 306097,

Automatic Paper Bag Making Machine ZENBO 1260S-450 Age 2019 Max Bag width450 Max paper feeding size 1260

General SKU254S1022 LocationBarneveld MakeZenner Ventilatoren GmbH TypeVRZ 280/50/1 WBN No.78154 Year of construction2015 Pressure Pressure buildup0.005 Bar Main Features Capacity7.8 m3/Min Motor0.55 KW Pressure0.005 Bar Specified Features - Blower Blowercheck Capacity472 m3/h (total increase of pressure 510 Pa, density 1,197 Kg/m3) Motor0.55 kW 220-240/380-420 Volt Inletdia 135mm Outletdia. 105mm MaterialMild steel Information Total height1,0 M Weight120 Kg CEcheck Floorspace0,6x0,5 MBlowersZenner Ventilatoren GmbHBlowers > BlowersBrand > Zenner Ventilatoren GmbH What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU292T673 LocationBarneveld MakeLuwa-heine (DE) Type406 No.6107940 Year of construction1984 Main Features MaterialHastelloy Motor15 KW Inlet diameter40 mm Specified Features - Peeling centrifuge Basket sizesdia. 600x330 mm Wall thickness8 mm Max. loading weight56 kg Motor15 kW 380 Volt (Ex) Max. basket speed1950 rpm With scrapercheck Hydraulic operatedcheck InletDN40, DN25, Solids outlet180x140 mm Liquid outletdia. 17 MaterialStainless steel 2.4610 (Hastelloy C-22) Information Floorspace1,3x1,6 m Total height1 m ATEX compatiblecheck Extra Specificationsrebuilt by GFT Trenntechnik in 1994 Peeling centrifugesHeine ZentrifugCentrifuges > Peeling centrifugesBrand > Heine Zentrifug What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to ...

General SKU254S1023 LocationBarneveld MakeZenner Ventilatoren GmbH TypeVRZ 560/20/1 ZAH No.79.016 Year of construction2016 Pressure Pressure buildup0.1 Bar Main Features Capacity0.6 m3/Min Motor5.5 KW Pressure0.1 Bar Specified Features - Blower Blowercheck Capacity36 m3/h (total increase of pressure 10038 Pa, density 3,13 Kg/m3) Motor5,5 kW 400/690 volt Inletdia. 105mm Outletdia. 50mm (2x) MaterialStainless steel 2.4605 (Alloy 59) Information Total height1,2 M Weight400 Kg CEcheck Floorspace2,0x1,2 M ATEX compatiblecheck Extra SpecificationsMax temperature 310-370 degr. C with extra small cooling fan 0.37 kW 208-255/360-450 volt BlowersZenner Ventilatoren GmbHBlowers > BlowersBrand > Zenner Ventilatoren GmbH What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide ...

Manufacturer: Zentner Systems GmbH Model: Soltec ST 100 Year of Make: 2006 Serial number: 0505 / 06 Operating voltage: 3 × 400 V Mains frequency: 50 Hz Operating power: 3 kW Operating pressure (air): 6.0 bar Design: Closed stainless steel screen washing cabin Application: Automatic cleaning of screen printing frames Particularities: – EX signs available – Integrated exhaust air / exhaust system – Compact design with its own control cabinet Location: Schierling Viewing possible by appointment.

Chopper Zeno Type: ZTLL 1150 x 1580 Year of Make: 1988 Rotor width 1150 mm Rotor diameter 380 mm Rotor speed 110 rpm. Hopper capacity approx. 5 m³ Capacity approx. 3 m³/h Hydraulic Moving Floor Both hydraulic cylinders for the moving floor were renewed in 2021. Motor 30 kW Weight approx. 3500 kg

General SKUR1307 LocationBarneveld MakeHeine Zentrifugen GmbH Type606 continue push centrifuge Main Features MaterialStainless steel Motor15 KW Specified Features - Pusher centrifuge Pusher centrifugecheck Basket diameter600 mm Basket width300 mm Wall thickness8,5mm Max. loading weight20 Kg Motor15 kW (400 V, (Ex)) Max. basket speed1250 rpm Hydraulic operated pushercheck With hydraulic unitcheck Motor7,5 kW (400 V) Solids outlet+/- 800 x 250 mm Liquid outlet(2x) 205 x 250 mm MaterialStainless steel 1.4571 (316Ti) Information No.110020 Year of construction1988 Mounted on framecheck With switchcheck Floorspace2,7 x 1,7 m Total height1,4 m Weight3350 Kg ATEX compatiblecheck Extra Specificationslid including inlet is missing Pusher centrifugesHeine ZentrifugCentrifuges > Pusher centrifugesBrand > Heine Zentrifug What you can expect from Foeth: -- Machine is in ...

General SKU254S211 LocationBarneveld CEcheck MakeZenner Ventilatoren GmbH TypeVRZ 1000/20/1 ZAH Pressure Pressure buildup0.0459 Bar Main Features Capacity13.3 m3/Min Motor18.5 KW Pressure0.045 Bar Specified Features - Blower Blowercheck Capacity799 m3/h (total increase of pressure 4587 Pa, density 0,65 Kg/m3) Motor18.5 kW 400/690 volt Inletdia. 190mm Outletdia. 190mm MaterialStainless steel Information No.78153 Year of construction2015 Floorspace2,3x1,5 M Total height1,7 M Weight1400 Kg Extra SpecificationsMax temperature 450 degr. C with extra small cooling fan 0.37 kW 208-255/360-450 volt BlowersZenner Ventilatoren GmbHBlowers > BlowersBrand > Zenner Ventilatoren GmbH What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machi ...

General SKUR1306 MakeHeine Zentrifugen GmbH LocationBarneveld Type606 continue push centrifuge Main Features MaterialStainless steel Motor15 KW Inlet diameter50 mm Specified Features - Pusher centrifuge Basket sizes600x300mm (cilindrical part) Wall thickness8,0mm Max. loading weight20 Kg Motor15 kW 380 Volt (Ex) Max. basket speed1250 rpm With hydraulic unitcheck Motor7,5 kW 380-420/660-690 Volt Inletdia. 50mm Solids outlet+/- 800x250mm Liquid outlet(2x)205x250mm Pusher centrifuges Pusher centrifugecheck Basket diameter600mm Basket width300mm Wall thickness8mm Max. loading weight20 Kg Motor15 kW Max. basket speed1250 rpm With hydraulic unitcheck Motor7,5 kW 380-420/660-690 Volt Inletdia. 50mm Solids outlet+/- 800x250mm Liquid outlet(2x)205x250mm MaterialStainless steel 1.4571 (316Ti) Information No.99705 Year of construction1974 Mounted on framecheck  ...

ZENO shredder type ZTLL 3000 x 2500 For crushing PVC window frames Capacity approx. 10 t/h with screen perforation 50 mm Ø Inlet cross-section: 3000 x 2500 mm Drive: 2 x 132 kW, gearbox with torque cut-off Rotor flight circle: 750 mm Rotor speed: approx. 80 rpm Rotor design: 4 rows (180 pcs.) positive inserts, 80 x 80 x 45 mm on tool holders Rotor Bearing: Pillow Block Bearing Rotor body: hardfaced (wear protection) Water spraying funnel: flat jet nozzles, à 3 l/min at 3 bar Screen design: solid screen basket, reinforced with ribs, with screen quick-change device Counter blade: with cutting gap adjustment and foldable Side walls in the rotor area: replaceable, Hardox material Hopper: 1300 mm high, flared on 4 sides, double-walled with concrete filling, without lid Machine weight: approx. 43,000 kg Control cabinet (loose, for controlling the machine, incl. soft sta ...

Various old sawmill machines are available. 1) Double shaft saw Costa Leonard, max. cutting height: 200mm, max. cutting width: 350mm, weight: approx. 5000kg. 2) Step feeder Esterer WD, max. log length: 6000mm. 3) Frame saw Esterer HD 30, frame opening: 710mm, stroke: 600mm. Including accessories. 4) Multi blade saw Costa Multiprisma 35, max. log length: 6000mm. 5) Drum chipper Zeno, drive power: 55kW. 6) Board stacking machine Zimac, working length range: 800mm-3000mm. 7) Steel chimney stack Schicks, height: approx. 50m, diameter: approx. 1400mm. Documentation available. An on site inspection is possible. Individual sale possible by arrangement.

ZENO Zerkleinerungsmaschinenbau Norken GmbH ZTLL 1000x1200 Waste shredder in use until 03/2026 in good used condition Masch. No. 98A-4689 Standard version, screen hole 20mm Low-speed with moving floor Main drive 18.5 kW, hydraulics 0.75 kW 400/690 V, total rated current 36A Fuse 63A Conductor cross-section 4x16 square Weight 1950 kg, 20 cutting edges Rotor speed 140 rpm Rotor diameter 300 mm Extraction diameter 250 mm Exhaust air speed 30 m/s Inlet cross-section L 1000mm W 800mm External magnetic separator Spare blade

General SKU048H205 MakeHeine Zentrifugen GmbH Viersen TypeHorizontalschälzentrifuge 408 No.6.110.780 Year of construction1991 LocationBarneveld Main Features MaterialStainless steel Motor30 KW Inlet diameter800 mm Specified Features - Peeling centrifuge Peeler centrifugecheck Basket sizesdia. 800x500 mm Wall thickness16 mm Max. loading weight115 kg Motor30,0 kW, 380 Volt (Ex) Max. basket speed1900 rpm With scrapercheck Hydraulic operatedcheck With hydraulic unitcheck Motor0,75 kW, 380 Volt (Ex) MaterialStainless steel 1.4539 (904L) Information With switchgearcheck(as is) Floorspace2,6x1,6 m Total height1,9 m ATEX compatiblecheckDiscountPeeling centrifugesHeine ZentrifugDiscountCentrifuges > Peeling centrifugesBrand > Heine Zentrifug What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping t ...

Inlet cross-section: 1200 x 1600 mm Drive: 110 kW, without gearbox Rotor flight circuit: 380 mm Rotor speed: approx. 470 rpm Rotor design: 66 cutting plates on tool holders Screen version: solid screen basket, reinforced with ribs Sieblochung: 15 mm Counter knife: with cutting gap adjustment Machine weight: approx. 5,900 kg Intake opening: 1,200 x 1,600 mm Engine power: 110 kW, without gearbox Rotor flight circle: 380 mm Rotor speed: approx. 470 rpm Cutting system: 66 cutting inserts on toolholder Screen: reinforced screencage, 15 mm perforation Counter knife: with mechanical adjustment device Machine weight: approx. 5,900 kg

intake opening: 2,500 x 2,000 mm rotor flight circle: 580 mm each rotor execution: special teeth motor power: 2 x 90 kW with planet gears weight: approx. 18,500 kg

intake cross section: 1,600 x 1,200 mm motor power: 2 x 45 kW knife width: 55 mm knife number: 56 pieces rotor flight circle: 655 mm Planetary gearbox

Frequency converter, frequency converter, drive converter, controller, variable speed drive, power supply -AC power source: ZAF 0.5/270/2 -Line In: 90-264 VAC 47-63 Hz -Output: 500 VA Max -Dimensions: 560/430/H95 mm -Weight: 18.6 kg

intake cross section: 2500 x 1,700 mm motor power: 160 kW rotor flight circle: 670 mm rotor execution: cutting inserts on tool holders counterknife: with cut gap adjustment machine weight: approx. 24,000 kg

intake cross section: 5,000 x 3,500 mm motor power: 2 x 110 kW motor power hydraulic unit: 22 kW rotor flight circle: 635 mm rotor execution: 244 pcs. cutting tools on tool holders screen: hydraulically tiltable hopper volume: approx. 40 m³ machine weight: approx. 55 tons

Working width: 820 mm rotor flight circle: Ø 720 mm drive: 90 kW cutting system: 8 cutting blades equipment: mechanical adjustment of the cutting gap Machine weight: 3500 kg

Inlet cross-section: 1200 x 2300 mm Drive: 30 kW Rotor flight circle: 450 mm Rotor speed: approx. 80-140 RPM Rotor version: 24 single tooth Screen design: reinforced solid basket, with ribs Hopper: 1,000 mm in height, without lid Machine weight: approx. 6,000 kg Machine number: G-1-66

Type: ZSA 1500 Working width: 1500 mm Flight circle metering drum: Ø 1600 mm Motor power: 18,5 kW Length metering device: 7800 mm Width metering device: 1600 mm Volume metering device: approx. 25 m ³

Intake opening: 420 x 750 mm Motor: 7,5 kW Rotor flight circle: 250 mm Rotor speed: approx. 140 RPM Rotor version: 10 single teeth Screen design: reinforced, with ribs Hopper: 1,050 mm high, without lid Exhaust pipe 200 mm diameter Machine weight: approx. 900 kg

Infeed width: 720 mm infeed height: 330 mm rotor flight circle: 1000 mm number of cutting knives: 2 piece number of counter knives: 1 piece infeed: 2 x 3 rolls motor power: 110 kW screen perforation: Ø 30 mm machine weight: ca 7,800 kg

Inlet cross section: 2500 x 1900 mm drive: 2 x 110 kW rotor flight circle: Ø 745 mm rotor speed: approx. 93 RPM rotor design: 185 PCs. cutting plates 50 x 50 x 25 mm screen perforation: Ø 70 mm counter knives: with cutting gap adjustment machine weight: approx. 29,000 kg

Working width: 2000 mm rotor flight circle: Ø 1000 mm drive: up to 315 kW cutting system: 40 piece cutting bars facilities: counter knife traverse pivoting hydraulically Right-left operation Hydraulic hood opening Screen: hydraulically extendible

Exhibition machine Inlet width: 1,400 mm Inlet height: 550 mm Rotor diameter: 1,600 mm Chopping knife count: 4 pieces Counter-knife number: 1 pc. with cutting gap adjustment Feed unit: 2 x 5 rollers Drive: 250-500 kW Machine weight: approx. 30,000 kg

with 14 shapes with 14 Forms

- Cooling lubricant basin  - Filtecci filter system  - Grundfos CR 90-2 (standard)  - GEA plate heat exchanger  - Collecting tray fleece according to ZNG - if required or container  - Transport trolley fleece according to ZNG - if required or container  - LxWxH 4500x2600x2100 - Emulsion capacity 1500 l/min at 4 bar

A used Zetner Multiline W250 car wash is being sold. Specification: See attached datasheet

drum diameter: 382 mm drum height: 250 mm filling amount: 40 kg wall thickness of drum: 13 mm drum revolutions: 2850 U/min Capacity: 800 l/h voltage: 400 V total power requirement: 5,0 kW weight of the machine ca.: 500 kg dimensions of the machine ca.: 1,90 x 0,70 x 1,65 m Centrifuge with water treatment - Factory No.: 22126799 - Machine ON: 5.144,65 h - Timer The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Complete plant (production) for paving stones: Gravel feed Mixer Main Engine 844AZ Stacking system Strapping system

faceplate diameter: 1400 mm Thickness: 200 mm : 650 total power requirement: . kW weight of the machine ca.: 1000 kg dimensions of the machine ca.: . m 340 rpm Bolt circle: 330 mm Fit: 285 mm Jaw width: 55 mm Thickness: 170 mm Opening: 145 mm The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG ...

5 sets of knives for the three-knife trimmer Muller Martini Zenith 3672 Tungsten Carbide Quatro

Good condition Auction-ID: A7-45427-225

Used capsuling machine Robino & Galandrino for champagne bottles up to 12000 bph The machine Robino & Galandrino ZENITH for champagne bottles up to 12000 bph delivers high-precision capsuling for specific applications in the bottling sector of sparkling wines and champagne. Moreover, Robino & Galandrino manufactured the ZENITH Z 3-36 OTTICO model in 2016, incorporating advanced technology to achieve optimal capsuling results. Technical Specifications of the Capsuling machine Robino & Galandrino ZENITH Production speed: This capsuling machine processes up to 12,000 bottles per hour (bph) with single capsule centering. Additionally, it reduces the speed to 9,000 bph in double centering mode, which aligns both the bottle and the capsule optically. Containers: This machine specifically accommodates glass bottles, thereby fulfilling the requirements of champagne and sparkling wine producers.  ...