zeno gmbh used for sale

Set of 2 unused Duechting type MC 50-315 D pumps, manufactured in 2014. Düchting Pumpen Maschinenfabrik GmbH & Co. KG Q 20 m³/h H 21.8 m N 1140 1/min P 4.1 kW T 70 °C Rho 1400 kg/m³ TYPE MC Horizontal single-stage centrifugal pump in back pullout design. • Pumping of abrasive and corrosive liquids • All components which are in contact with the liquid are made of SICcast • Suction flange: Axial • Discharge flange: Top (Vertical) • Closed impeller with three-dimensionally curved vanes • Impeller is key driven; reverse rotation (e.g. back-flushing) is possible • Re-adjustable inclined gap between impeller and volute casing to optimize the efficiency and differential pressure after longer operation • Single acting, metal free mechanical seal DÜTEC with springs located outside of the liquid (other seal types available) • Oil-lubricated antifriction  ...

Saw mill vertical Boegli Weight 4000 kg L x W x H: 200 x 160 x 330 cm Roll diameter 1250 mm Stem á 1.2 m, with mechanical clamping cars 9 m Chuck Wagon L x W x H: 900 x 200 x 170 cm Weight approx. 6000 kg Built 1952 The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Blow-through lock, all-out lock, cell lock, rotary valve, cell wheel lock, dosing lock used AZO GmbH Type: Z100/5 F 4.6 Inlet approx.: Ø 250 mm Height approx. 450 mm Cell wheel Ø approx. 300 mm Rotary wheel width approx. 250 mm Wing height approx. 15 mm approx. 8 cells Hole circle flange Ø approx. 335 mm with intake filter NW 100 EIT-4181 geared motor Sew 0.18/0.66 kW 7.3/30 rpm 380 V Total dimensions approx.: 1800 x 400 x 450 mm The lock was used in the food industry. Presumably for transport and dosage of flour. used Rotary Valve, Rotary Airlock, Dosing Valve, Dosing System Changes and errors in the technical data, information and prices as well as intermediate sale reserved.

Aspirator Rachel with fan, 11 kW Chip feeding screw Pipes Built in 1995 L x W x H: 150 x 120 x 400 cm Weight approx. 2500 kg The machine is in good condition, ready to use. Subject to changes, errors, and intermediate sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

machine measurements: 1800 x 2300 x 2300 mm machine weight: 1800 kg power capacity: -- kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Machine type water circulation cooling unit Merkle brand Type WK 370 Plant No. 38.118 Connection voltage 1 x 230 Volt Connection 6-pin Harting plug Water pressure 3.5 bar Water connection 2 quick-release couplings Water tank 3 ltr. Content Dimensions L x W x H 700 x 370 x 285 mm Weight 28 kg Age approx. 10 years Condition workshop tested very good Warranty 12 months from the date of delivery Original price 1.200,00 € + VAT Price 675,00 € + VAT ___________________________________________________________ The machine is located in the Wilhelm Merkle Schweisstechnik GmbH Anton-Böck-Strasse 31 81249 Munich, 81249 Contact person is Mr. Manuel Maier. Of course, we will send the machine to you for 60, - € by forwarding agent throughout Germany. ____________________________________________________________ You can also finance our ...

Wood drying chamber Bollmann L x W x H outside: 11.0 x 3,0 x 2,7 m Stack dimensions B x H: 1.5 x 2.0 m Weight approx. 2000 kg Built in 1982 The wood drying chamber is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Machine type water circulation cooling unit Merkle brand Type WK 230 Connection voltage 1 x 230 Volt Connection 6-pin Harting plug Water pressure 3.5 bar Water connection 2 quick-release couplings Water tank 3 ltr. Content Dimensions L x W x H 610 x 230 x 215 mm Weight 18 kg Age 8 years Condition workshop checked as new Warranty 12 months from the date of delivery Original price 990,00 € + VAT Price 590,00 € + VAT ___________________________________________________________ The machine is located in the Wilhelm Merkle Schweisstechnik GmbH Anton-Böck-Strasse 31 81249 Munich, 81249 Contact person is Mr. Manuel Maier. Of course, we will send the machine to you for 60, - € by forwarding agent throughout Germany. ____________________________________________________________ You can also finance our machine with 0%! We offer you  ...

Knee lever shears for sheet metal Cutting length 15 cm maximum sheet thickness 3 mm Built in 1982 L x W x H: 50 x 40 x 150 cm Weight approx. 50 kg The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/Ersatzteile durch MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system+technik GmbH Maschinenbau Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Machine type water circulation cooling unit Merkle brand Type WK 200 Connection voltage 1 x 230 Volt Connection 6-pin Harting plug Water pressure 3.5 bar Water connection 2 quick-release couplings Water tank 3 ltr. Content Dimensions L x W x H 590 x 200 x 210 mm Weight 15 kg Age 8 years Condition workshop checked as new Warranty 12 months from the date of delivery Original price 990,00 € + VAT Price 590,00 € + VAT ___________________________________________________________ The machine is located in the Wilhelm Merkle Schweisstechnik GmbH Anton-Böck-Strasse 31 81249 Munich, 81249 Contact person is Mr. Manuel Maier. Of course, we will send the machine to you for 60, - € by forwarding agent throughout Germany. ____________________________________________________________ You can also finance our machine with 0%! We offer you  ...

Due to bankruptcy custommer cancellation, we sell a pallet shelf system from BITO, who is immediately available. Total pallet places available uot to 2.100 pallet places. The price here is for following combination: 60 x shelf fields with each 3 x beam pairs 3600 x 120 x 50mm Height of the frames 6.600mm. Depth 900 or 1100mm Total quantity: 70 pieces of frames 6600x1100mm, galvanized, dismantled 360 pieces of beams 3600 x 120 x 50, compartment 2.000 kg, Virgin Blue painted More and smaller quantities possible. Please enquire Mr. Rössler / LHS GmbH

Machine type TIG inverter welding system gas-cooled DC and AC system Merkle brand Type MobiTIG 180 AC/DC Connection voltage 1 x 230 Volt Setting range 5 – 180 amps Duty cycle 20 % ED at 180 amps 60% ED at 110 amps 100% ED at 90 amps Current adjustment infinitely variable weldable material thickness 5 mm Cooling inverter by built-in fan Cooling burner gas-cooled Version portable mounting system Fuse 16 amps Dimensions L x W x H 355 x 160 x 275 mm Weight 9 kg Age 6 months Condition workshop tested, as new, incl. UVV test protocol Scope of delivery welding system with the following accessories: 1 piece TIG burner 4 mtr. long 1 piece ground cable 1 piece pressure reducer with 2 pressure gauges 1 pair of TIG gloves 1 piece spare parts box kpl. Equipped 18 months warranty 1 piece instruction manual List-Werks-Price ex stock  ...

Edge glue machine HolzHer express 1437 Glue, caps, flush milling, RADIUS milling / Beveling, scraping, cutting tool for rolling edges Total revision 10 years ago everything top Year of construction 1989 L x W x H: 500 x 120 x 170 cm Weight approx. 1800 kg The machine is in top shape, ready for use. Subject to changes, errors, and intermediate sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Machine type TIG inverter welding system gas-cooled DC and AC system Alphaforce brand Type W-160 AC/DC Connection voltage 1 x 230 Volt Setting range 5 – 160 amps Duty cycle 30 % ED at 160 Ampere 60% ED at 100 amps 100% ED at 90 amps Current adjustment infinitely variable weldable material thickness 4 mm Cooling inverter by built-in fan Cooling burner gas-cooled Version portable mounting system Fuse 16 amps Dimensions L x W x H 485 x 240 x 435 mm Weight 22 kg Special accessories connection for foot remote control Age 6 months Condition workshop tested as new incl. UVV test protocol Scope of delivery welding system with the following accessories 1 pc TIG burner Alphaweld SR-17, 4 mtr. long 1 piece ground cable 1 piece pressure reducer with 2 pressure gauges 1 pair of TIG gloves 1 piece spare parts box kpl. Equipped 1 pi ...

Caterpillar engine C12 # BDL... an overhault,exchange engine with original CAT parts incl.turbo,sensors,controller,without starter+altenator Other CAT engines/parts from stock immediately available request Contact: MIW GmbH North-West-Ring 8 D-27404 Zeven/Germany Info@miw-Zeven.de phone: 0049(0) 4281-950583

Generator of the Jenbacher 312 Newage engineers GmbH 664 kW 800 kVA Can we gladly create an offer of a generator maintenance

Machine type TIG inverter welding system gas-cooled DC and AC system Alphaforce brand Type W-200 AC/DC Connection voltage 1 x 230 Volt Setting range 5 – 200 amps Duty cycle 25 % ED at 200 amps 60% ED at 110 amps 100% ED at 90 amps Current adjustment infinitely variable weldable material thickness 5 mm Cooling inverter by built-in fan Cooling burner gas-cooled Version portable mounting system Fuse 16 amps Dimensions L x W x H 485 x 240 x 435 mm Weight 22 kg Special accessories connection for foot remote control Age 6 months Condition workshop tested as new incl. UVV test protocol Scope of delivery welding system with the following accessories: 1 piece TIG burner Alphaweld SR-26, 4 mtr. long 1 piece ground cable 1 piece pressure reducer with 2 pressure gauges 1 pair of TIG gloves 1 piece spare parts box kpl. Equipped 1  ...

The STOCK LM 1235 / 1250P litho laminating machine was manufactured in 1995 by the German company Stock Maschinenbau GmbH. The laminator is used for wrapping cardboard with thin paper in order to obtain a decorative, aesthetic packaging. Labels with a format (length x height) of 250 x 250 mm are glued on cardboard sheets with a maximum width of 1250 mm and a length of 1235 mm. The LM 1235-1250P litho laminating machine is equipped with: pressure roller, sensor for detecting and registering the stuck label, or the gluing unit with automatic glue supply. Technical data of the STOCK LM 1235.1250P litho laminating machine - lamination length: 1235 mm - laminating width: 1250 mm - label format (length x height): 250 x 250 mm - semi-automatic machine with a label dispenser - manual label feeding table - single sheet - gluing unit with automatic glue supply - sensor for detecting and  ...

Jaw Crusher Baioni BS 105 incl. spare parts (without JAWS) Only 900 hours of operation since replacing bearings Total1960 hours of operation Masch for normal stone. No. 1917 Year 2009 intake opening 1050 x 340 mm Minimum gap width 30 mm Maximum gap width 77 mm 55 kW Weight approx. 9'900 kg V-belt protection The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Industry - fan / blower manufacturer: DSD air Division (today: Ferrostaal air technology GmbH) Type: Dara 1000 R Year of construction: 1992 Flow rate: 35,000 m ³/h Pressure: 6,500 PA Speed min.: 2,035 U/min Speed max.: 2,160 rpm Power: 75 kW Air density: 1.1222 kg / m ³ Maximum temperature: 90 ° C Original price: 68.000,00 € net In very good condition!

This electrically driven sinusoidal table has an incremental angle measuring device (Heidenhain RON 705). -Sinusoidal table for workpiece clamping -Swivel range 0 - 110° -Clamping surface 800 x 600 mm -Groove width 22 mm -Groove spacing 100 mm -Number of grooves:6 pieces -Dimensions: Length: 840 mm Width: 760 mm Height: 220 mm Clamping angle, clamping angle, clamping tower, clamping device, About us: MBM Maschinenservice & Gebrauchtmaschinen GmbH, is a freelance specialist for SHW machine tools. Our main task is in the field of machine tool milling machines. Our services include spare parts deliveries, on-site customer service, machine overhauls and control modernizations. Performances: - Used machines - Spare parts - Customer service - Machine service - Machine overhauls - Control modernization

Vertical turret lathe FKD 40 CNC with Y-axis and CNC Rotary milling head (A-axis) Faceplate diameter 4000 mm Turning diameter: 8000 mm Turning height: 3000 mm Slide cross section: 300 mm x 300 mm Stroke: 3000mm X-axis: travel 5000 mm Z axis: travel 2000 mm Y-axis: travel 6000 mm W-axis: stroke 1500 mm C-axis in face plate table A-axis milling head Control: Siemens 840 DSL Tool changers: 60 seats PickUp station: 5 places

Motor-driven NC rotary table Stepless rotary table (pitch 0.001°) Attached pallet station: pallet changing table (2 pallets) Manufacturer: Rückle Type: PKTF 1200 Table size: 1200 mm x 1200 mm Total height: 660 mm Centering bore: 100 H6 mm Clamping grooves: 7 pieces Slot dimensions: 22 H7 mm Slot spacing: 160 mm The displacement measurement is carried out via a rotary encoder ROD 250. Condition: Very good (used) Optional with machine bed (travel = 2000 mm) About us: MBM Maschinenservice & Gebrauchtmaschinen GmbH, is a freelance specialist for SHW machine tools. Our main task is in the field of machine tool milling machines. Our services include spare parts deliveries, on-site customer service, machine overhauls and control modernizations. Performances: - Used machines - Spare parts - Customer service - Machine service - Machine overha ...

Kehl machine / milling machine Schneider 3-roll feed SUVA protection L x W x H: 120 x 100 x 170 cm Weight approx. 580 kg Built in 1981 The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Motor-driven NC rotary table Stepless rotary table (pitch 0.001°) Manufacturer: Rückle Type: PKT 1000 Clamping area: 1400 mm x 1400 mm Total height: 319 mm Clamping grooves: 7 pieces Slot dimensions: 22 H7 mm Slot spacing: 160 mm Centering bore: 140 H6 mm Condition: Very good (used) Optional with machine bed About us: MBM Maschinenservice & Gebrauchtmaschinen GmbH, is a freelance specialist for SHW machine tools. Our main task is in the field of machine tool milling machines. Our services include spare parts deliveries, on-site customer service, machine overhauls and control modernizations. Performances: - Used machines - Spare parts - Customer service - Machine service - Machine overhauls - Control modernization

Extruder KE 90 x 30-D for manufacturing of von TPE foam and compact profiles screw diameter: 90 mm L/D ratio 30:1 (2700mm) extruder with 11 temperature-controlled zones (electrically heated by fluids) Siemens electric drive, motor 45kW at 2500rpm year of construction 1996, machine in very good condition (preliminary used in test operations) melt application device (gear pump) double profil head (also used for extrusion-coaded framework belts) electric equipment partially available extruder mounted on movable baseplate

Industrial freezer down to -40°C TTS 40-944U Fryka Refrigeration Freezer down to -40°C Tyxp TTS 40-944U Manufacturer Fryka Kältetechnik GmbH LED temperature display Electronic control ST100 (membrane keyboard) Alarm equipment Standby switch Current connection 400Volt, 16A Former original price 20.000.-EUR Quote from manufacturer description: "The housing is made entirely of stainless steel sheet. The insulated outer lid is lockable on the handle. In addition to the outer lid with double seal, the interior is closed with PE insertion lids. The lid is fixed to the base housing with folding hinges and is dampened by gas springs when opening and closing. This allows an opening angle of 90°. The insulation between the interior and the housing jacket is made of two-component insulating foam. The evaporator tubes of the chiller are wound around the interior. The inner she ...

Strapex apparatus Plastic band seals L x W x H: 80 x 40 x 100 cm Weight approx. 70 kg Built in 1982 The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Powder mixing plant Ytron Dr. Karg, built in 2012 and with Flow tank. Capacity up to 10 to/h The powder was treated via pipes into the flow vessel. The whey or milk powder mixture was via the plate heater and hot water Cycle in batch operation with the basic tanks set and then released for further processing. With frame and staircase a.) With a GEA plate heater for treatment the powder water solution. Hersteler FA. GEA TDS GmbH, Sarstedt Type: VT 20 CD-9-C-16 170/7412 No. 3600 4074, year of construction 2012 b.) With wall-mounted control cabinet system Siemens S 7 for process technology, CIP tank system and Control of cleaning paths c.) With 1 CIP system for the standing tank as a 1-tank cleaning system for the Batch operation and for the powder mixing plant Self. Content CIP tanks 15,000 l insulated, deformed inwards in the upper area with valve no ...

Kettenstemmer Müller Wall mounting L x W x H: 60 x 40 x 170 cm Weight approx. 270 kg Built in 1973 The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Frequency-controlled heating laboratory press with force measuring device -Pressure 20 KN / 2 tons -Pressing area 220 220 mm -Maximum pressing force at 220 220 mm: 41 N / cm² -Hot press with moveable lower pressing plate, electric drive with gear reduction, force measurement is carried out by means of strain gauge sensor -Heat output approx. 1 KW -Plate temperature 120 ° C -Dwell time / duration of laminating: 1-10 s -Pneumatic connection 6bar required -Power supply 400 V, 16 A -Sliding table with integrated positioning pins, lower pressing plate, pneumatic drive -Pressing panels with switchable integrated vacuum channel -Electrical control system integrated with PLC control display in the front panel of the machine -Side channel pump to generate the vacuum

Gas-heated annealing and hardening furnace make SCHNEIDER GmbH Witten type 6 KMachine -No: 31 built in 2002Technical specifications:Chamber size W x D: 1200 x 900 mmin the rear part of the chamber step downwards: depth 500 x height 400 mmOpening W x H: 1200 x 470 mmmax.temperature: 1300 °Connected load: 300 kWHeating medium: natural gasExternal dimensions approx. W x D x H: 2200 x 2600 x 2650 mmWeight: 5850 kgWith- MEILI hand winch for opening the oven door- Attention without switch and control cabinet!usedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Electric chain hoist steel R 6 Year of construction 1977 Pulling power 300 kg Weight approx. 70 kg L x W x H: 30 x 30 x 50 cm The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

properties: Used Schrenrollenbahn Condition: used Material: Steel (galvanized) Incl. SEW motors (9 drive units) Incl. 10 feet, height adjustable Speed adjustable Expertly dismantled and packaged specifications Scissor roller conveyor of the manufacturer Schmid Systemtechnik GmbH Year of construction: 2018 Conveying width: 600mm Material: Steel Total length extended: 9.000mm Total length retracted: 4.950mm Conveying width: 1.000mm Roll diameter: 50 mm Head: 820mm to 1040mm Number of rolls: 91 pieces Tailor-made solutions for your intralogistics We are your competent partner for roller conveyors, belt tracks, inclined conveyors or telescopes for loading and unloading your goods! We are happy to prepare your individual offer or advise you on the conception or assembly questions. Simply let us know your needs and local conditions. Take advantage ...

Round table with C-axis and Y-axis FKD 40: Faceplate diameter 4000mm Y-axis traverse path: 6000mm Load capacity 50 to Max. Speed 120rpm with shifting-gearbox Stoeber Master-Slave-embracing on C-axis and on Y-axis, 2 Siemens motors each 60 KW (C-axis), 2 Siemensmotoren (Y-axis) Speed 1st stage 0-20rpm, 180000 Nm Speed 2nd stage 0-120rpm, 45000 Nm Oil lubrication, Hydrostatic bearing Dimensions: Length: 11000 mm, width: 4000 mm, height: 1200 mm Mass 35 t. Maintenance free, Manufactured in Germany

Heat pump or chiller, water-cooled, Type: OCEAN Tech OCT-H 150, M.T.A. S.p.A. OCEAN Tech OCT-H 150 are heat pumps (alternatively chiller) water / water for indoor installation without hydraulic circuit (pump, accumulator) incl. crankcase heating, phase monitoring. (The dry cooler, storage tank and pumps are not included in the offer). Heating capacity 50.2 Capacitor Hot water temp. Outlet / Entrance: 45 / 40°C Volume flow m³/h 6.33 Evaporator Medium: Hot water Cooling water temp. Outlet/ Entrance: 7 / 12°C Medium: Cold water Refrigerant R 410A (Cooling capacity 44.6 – optionally possible) Evaporator Cold water temp. Outlet/ Entrance: 7 / 12°C Volume flow m³/h 7.64 Medium: Cold water Capacitor Cooling water temp. Outlet / Entrance: 35 / 30°C Medium: Cooling water Refrigerant R 410A Electrical data: Voltage V 400, frequency Hz 50, phases Ph 3 pow ...

Heat pump or chiller, water-cooled, Type: OCEAN Tech OCT-H 150, M.T.A. S.p.A. OCEAN Tech OCT-H 150 are heat pumps (alternatively chiller) water / water for indoor installation without hydraulic circuit (pump, accumulator) incl. crankcase heating, phase monitoring. (The dry cooler, storage tank and pumps are not included in the offer). Heating capacity 50.2 Capacitor Hot water temp. Outlet / Entrance: 45 / 40°C Volume flow m³/h 6.33 Evaporator Medium: Hot water Cooling water temp. Outlet/ Entrance: 7 / 12°C Medium: Cold water Refrigerant R 410A (Cooling capacity 44.6 – optionally possible) Evaporator Cold water temp. Outlet/ Entrance: 7 / 12°C Volume flow m³/h 7.64 Medium: Cold water Capacitor Cooling water temp. Outlet / Entrance: 35 / 30°C Medium: Cooling water Refrigerant R 410A Electrical data: Voltage V 400, frequency Hz 50, phases Ph 3 pow ...

Round table with C-axis and Y-axis FKD 40: Faceplate diameter 4000mm Y-axis traverse path: 6000mm Load capacity 50 to Max. Speed 120rpm with shifting-gearbox Stoeber Master-Slave-embracing on C-axis and on Y-axis, 2 Siemens motors each 60 KW (C-axis), 2 Siemensmotoren (Y-axis) Speed 1st stage 0-20rpm, 180000 Nm Speed 2nd stage 0-120rpm, 45000 Nm Oil lubrication, Hydrostatic bearing Dimensions: Length: 11000 mm, width: 4000 mm, height: 1200 mm Mass 35 t. Maintenance free, Manufactured in Germany

Manufacturer: SHW Machine Tools Type: UF 21 Routes X,Y, Z: 1000, 600, 625mm Control: Heidenhain TNC 155 Table: Folding table 1000 x 630 mm Automatic swivel head Pinole 120mm Milling spindle holder SK 40 Speed 2500rpm Overhaul 2016 Partial overhaul 2022 About us: MBM Maschinenservice & Gebrauchtmaschinen GmbH, is a freelance specialist for SHW machine tools. Our main task is in the field of machine tool milling machines. Our services include spare parts deliveries, on-site customer service, machine overhauls and control modernizations. Performances: - Used machines - Spare parts - Customer service - Machine service - Machine overhauls - Control modernization

Round table with C-axis and Y-axis FKD 40: Faceplate diameter 4000mm Y-axis traverse path: 6000mm Load capacity 50 to Max. Speed 120rpm with shifting-gearbox Stoeber Master-Slave-embracing on C-axis and on Y-axis, 2 Siemens motors each 60 KW (C-axis), 2 Siemensmotoren (Y-axis) Speed 1st stage 0-20rpm, 180000 Nm Speed 2nd stage 0-120rpm, 45000 Nm Oil lubrication, Hydrostatic bearing Dimensions: Length: 11000 mm, width: 4000 mm, height: 1200 mm Mass 35 t. Maintenance free, Manufactured in Germany

Machine type TIG inverter welding system gas-cooled DC system Eurotronic brand Type Porty TIG 1601 DC (i)-2 Connection voltage 1 x 230 Volt Setting range 3 - 160 amps Duty cycle 60 % ED at 160 Ampere 100% ED at 100 amps Current adjustment infinitely variable weldable material thickness 4 mm Cooling inverter by built-in fan Cooling burner gas-cooled Version portable mounting system Fuse 16 amps Dimensions L x W x H 400 x 240 x 360 mm Weight 10 kg Age approx. 15 years Condition workshop tested, very good, incl. UVV test protocol Scope of delivery welding system with the following accessories: 1 piece TIG burner SR 17, 8 mtr. long 1 piece ground cable 1 piece pressure reducer with 2 pressure gauges 1 pair of TIG gloves 1 piece spare parts box kpl. Equipped Warranty 6 months from the date of delivery Listen-Werk-Price ex stoc ...

Machine type TIG inverter welding system gas-cooled DC system Make EP-Systems Type TopTIG 160 HF Connection voltage 1 x 230 Volt Setting range 5 – 160 amps Duty cycle 60 % ED at 160 Ampere 100% ED at 130 amps Current adjustment infinitely variable weldable material thickness 4 mm Cooling inverter by built-in fan Cooling burner gas-cooled Version portable mounting system Fuse 16 amps Dimensions L x W x H 410 x 240 x 320 mm Weight 10 kg Age 4 years Condition workshop tested very good incl. UVV test protocol Scope of delivery welding system with the following accessories: 1 piece TIG burner 4 mtr. long 1 piece ground cable 1 piece pressure reducer with 2 pressure gauges 1 pair of TIG gloves 1 piece spare parts box kpl. Equipped Warranty 6 months from the date of delivery Original price 1.550,00 € + VAT Price kpl. from ...

Filter system for ref. No. 235-1659 with bagging device for big bags L x W x H: 500 x 200 x 600 x cm Weight 2300 kg Built in 1999 The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Machine type TIG inverter welding system gas-cooled DC system Merkle brand Type LiteTIG 190 DC Connection voltage 1 x 230 Volt Setting range 5 – 190 amps Duty cycle 25 % ED at 190 Ampere 60% ED at 140 amps 100% ED at 115 amps Current adjustment infinitely variable weldable material thickness 5 mm Cooling inverter by built-in fan Cooling burner gas-cooled Version portable mounting system Fuse 16 amps Dimensions L x W x H 410 x 150 x 240 mm Weight 7.4 kg Age 6 months Condition workshop tested, as new, incl. UVV test protocol Scope of delivery welding system with the following accessories: 1 piece TIG burner 4 mtr. long 1 piece ground cable 1 piece pressure reducer with 2 pressure gauges 1 pair of TIG gloves 1 piece spare parts box kpl. Equipped 24 months warranty 1 piece instruction manual List factory price ex stock wit ...

Machine type TIG inverter welding system gas-cooled DC system Merkle brand Type LiteTIG 210 DC Connection voltage 1 x 230 Volt Setting range 5 – 210 amps Duty cycle 20 % ED at 210 Ampere 60% ED at 145 amps 100% ED at 135 amps Current adjustment infinitely variable weldable material thickness 6 mm Cooling inverter by built-in fan Cooling burner gas-cooled Version portable mounting system Fuse 16 amps Dimensions L x W x H 410 x 150 x 240 mm Weight 8 kg Age 6 months Condition workshop tested, as new, incl. UVV test protocol Scope of delivery welding system with the following accessories: 1 piece TIG burner 4 mtr. long 1 piece ground cable 1 piece pressure reducer with 2 pressure gauges 1 pair of TIG gloves 1 piece spare parts box kpl. Equipped 24 months warranty 1 piece instruction manual Listen-Werk-Price ex stock with 2 ...

Machine type TIG inverter welding system gas-cooled DC and AC system Merkle brand Type LiteTIG 210 AC/DC Connection voltage 1 x 230 Volt Setting range 5 – 210 amps Duty cycle 20 % ED at 210 Ampere 60% ED at 140 amps 100% ED at 130 amps Current adjustment infinitely variable weldable material thickness 6 mm Cooling inverter by built-in fan Cooling burner gas-cooled Version portable mounting system Fuse 16 amps Dimensions L x W x H 410 x 150 x 240 mm Weight 9 kg Age 6 months Condition workshop tested, as new, incl. UVV test protocol Scope of delivery welding system with the following accessories: 1 piece TIG burner 4 mtr. long 1 piece ground cable 1 piece pressure reducer with 2 pressure gauges 1 pair of TIG gloves 1 piece spare parts box kpl. Equipped 24 months warranty 1 piece instruction manual Listen-Werk-Price ex st ...

4-side Planer SCM P 75 Year of construction 1983 Masch. No. 045 8vsoczcl8 Planing width of 180 mm Planing height of 130 mm 4 spindle length 2500 mm Weight 1670 kg L x W x h: 310 x 120 x 180 cm The machine is in good condition, little used, ready for use. Subject to changes, errors, and intermediate sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Machine type compressor Birkenstock brand Type K8 / 40 / 230 Connection voltage 1 x 230 Volt Version mobile version Fuse 16 amps Dimensions L x W x H 1,120 x 400 x 760 mm Weight 60 kg Age 6 months Condition very little used Boiler capacity 40 liters intake capacity 250 litres/min. delivery quantity 175 litres/min pressure 10 bar Cylinder 1 piece Original price incl. water separator 1.035,00 € + VAT Price incl. water separator from stock Munich 895,00 € + VAT Compressed air hose, incl. plug-in sleeve and quick coupling, 9 mm Ø 10 mtr. long, ready to connect 34,80 € + VAT Sach-Nr. S-50.98.10 Compressed air hose, incl. plug-in sleeve and quick coupling, 9 mm Ø 25 mtr. long, 9 mm Ø 61,10 € + VAT Sach-Nr. S-50.98.25 Compressed air hose, incl. plug-in sleeve and quick coupling, 9 mm Ø 50 mtr. long, 9 mm Ø 104 ...