ze used for sale

Casing-in machine Zechini Model Gamma Year 2000 Working width 420 mm Thickness 100 mm (electrical adjustable) Details After order machine shall be completed with new side dams, new glue bin, and new glue adjustment gears Available Direct

VERTICAL PRESS RUTIL MODEL: ZEUSS1000TCDDB MATR. C06/100 YEAR: 2000 CLOSING FORCE: 1000 TON VOLTAGE: 380 V FREQUENCY: 50 HZ POWER: 216 KW PRESS. AIR: 6 BAR PRESS H20:4.5 BAR

PLUNGE EDM MACHINE CDM ROVELLA MODEL: ZENIT P1 STROKE X: 1500 MM STROKE Y: 1000 MM STROKE Z: 500 MM C AXIS 10-POSITION TOOL CHANGER MAX ELECTRODE WEIGHT: 2,500 KG MAX. WORKPIECE WEIGHT: 12,000 KG SUPPORT SURFACE: 2000 X 1200 MM TUB SIZE: 3000 X 1500 X 1075 MM CONTROL: HEIDENHAIN MOD. 406

Aflösebehälter Zettelmeier -Content 250 litres -Built in 2012 -Power 12 kW -Stainless steel -with drain tap

We sell 1500 x Atrust Zero Clients, brandnew in original packaging, EU / German systems With this chip: SOC SMSC UFX6000 10/100/1000 Ethernet In most cases, the entire lot can only be handed over in its entirety. More information on request. In most cases, advertised products can only be sold as a complete lot. More information on request. We look forward to receiving inquiries from Germany and internationally. We have many more refurbished/used hardware from the areas of the systems mentioned here as well as from the areas of other systems from these manufacturers available: IBM, DELL, HPE, ORACLE, NETAPP, QUANTUM, STK, FUJITSU, SGI, HDS, EMC, Supermicro, BULL, NEC, CRAY, 3Com, ADVA, Alcatel, Brocade, Cisco, Enterasys, Extreme Networks, Huawei, Marconi, Nortel, Qlogic, Avaya, ORACLE Tested, tested used hardware at low prices from HASCON! Sales are only made to compan ...

RACING X/Y/Z AXES 900/900/700 MM MEASURING PRECISION 2.2 + L/300 ?M WORKPIECE WEIGHT (MAX.) 1,200 KG CONTROL SYSTEM VAST MEASURING HEAD POINT/POINT CONTROL MODE CONTINUOUS SCAN MACHINE DIMENSIONS WIDTH 1,640 MM LENGTH 1,740 MM HEIGHT 2,700 MM WEIGHT (APPROX.) 2,000 KG

Anesthesia Drager Drager Primus Drager Zeus Drager Julian GE DATEX OHMEDA Aestiva 3000 Aestiva/5 7100 Aestiva/5 7900 Aestiva/5 7900 (monitor + gas module) Aespire 7900 (monitor + gas module) Aisys, Yon

Coordinate Measuring Machine 6-Axis Zett Measuring AMPG 3600 Precision Zett Mess Coordinate measurement technology Type AMPG 3600 Precision 6-axis measuring joint arm Magent foot and tripartite Laptop with software

50 Zebra label printers Are sold here Thermal Transfer / Thermodirect as a package Printers originated from insolvency and were still in use until closure

Size: 400 x 1.540 x 110 mm - 9 Rolls

Rotary union, 2x 1/2", 991769, Haag & Zeissler, used Special price If you have a VAT number, we will be happy to issue you with an invoice without VAT. Used! - Comes from a spare parts warehouse of a certified production facility, - is in very good condition and fully functional,- It may be that these are only minor storage marks and that the part is still as good as new and has never been used, but we cannot say for certain. Ensuring the function: In order to ensure the functionality of the goods, the buyer must check the goods at the time of acceptance or put them into operation. In case of any defect, which is not the fault of the buyer, the goods can be returned within 2 weeks. We will refund the buyer maximum the product price paid to us. For these goods we have to exclude warranty claims of the buyer for improvement, exchange, subsequent delivery or also for updat ...

There is a large item available to Zebra printer 140 and 170 width Versions Xi2-Xi4 Zebra's super-fast and durable 140Xi4 is easy to integrate and provides high reliability for action-critical applications. The 140Xi4 is super fast at 356 mm per second. This high performance and its steel sheet construction make it the ideal printer for high-throughput, high-throughput applications. The 140Xi4 is also well-used for applications where labels are needed quickly, either on demand or in larger quantities.

Availability: immediately Location: near Dresden Fondant system ZM 800 mm working width 1 piece of fondant glazing system (temperature control to + 38°C) - Working width approx. 800mm - Overall length approx. 2000mm - Working height approx. 870mm +/- 50mm with stainless steel swivel brake castors - Stainless steel frame construction in stainless steel 1.4301 – glass bead blasted - Conical drip plates – return glazing tray - Round cord belt transport 2-part with belt stripping in the return - Drive deflection shafts stainless steel 1.4301 with driven transfer shaft - Drive station SEW (7-20m/min.) - Stainless steel chassis with built-up glaze tray approx. 80 lt. Double-walled version with water filling and electric resistance heating. (Tempering to approx. 38º C). Level query with acoustic signaling. - Product delivery via OMAC rotary lobe pump - Built-in baffle box  ...

Availability: immediately Location: near Dresden 1 apricot system (temperature control to + 95°C) - Working width approx. 800mm - Overall length approx. 2000mm - Working height approx. 870mm +/- 50mm with stainless handlebars.- Brake castors - Stainless steel frame construction in stainless steel 1.4301 – glass bead blasted - Conical drip plates – return flow apricot tub - Round cord belt transport 2-part with belt stripping in the return - Drive.- Deflection waves stainless steel 1.4301 with driven transfer shaft - Drive station SEW (7-20m/min.) - Stainless chassis with mounted apricot tray approx. 80 Lt. version double-walled with thermal oil filling and electric resistance heating. (Pre-tempering to approx. 60º C). Level query with acoustic signaling. - Product delivery via OMAC rotary lobe pump with downstream instantaneous water heater (electrically for tempe ...

Stand unit with steel plate with C99 control Measuring ranges: x=5000 mm, y=2600 mm, z=2100 mm Measuring plate: 6000 mm x 3000 mm Rotary swivel head RDS for TP Control panel Dynalog Travelling control unit on the stand, opto-coupler, screen, keyboard, mouse Active vibration damping Without software and hardware. We reserve the right to make changes and errors in the technical data as well as to make the interim sale. Price plus transport and installation.

Carl Zeiss Axiovert 40C Inverted Light Microscope The Carl Zeiss Axiovert 40C is a routine inverted microscope specifically designed for the study of living cells and cell cultures in biology and medicine. Due to the inverted design, the objectives are located below the stage, which allows observation in larger culture vessels such as petri dishes or microtiter plates. Technical features Optics: Equipped with the ICS system (Infinity Color-corrected System) from ZEISS for high optical performance in all contrast processes. Lighting: Equipped as standard with a 12V 35W halogen lamp for transmitted light; optionally, an HBO 50 mercury vapor lamp can be used for fluorescence applications (model CFL). Contrast Method: Supports brightfield, phase contrast, and PlasDIC. Camera connection: The Axiovert 40C model has an integrated photo port (C-mount adapter) on the front for di ...

Exhibition machine Inlet width: 1,400 mm Inlet height: 550 mm Rotor diameter: 1,600 mm Chopping knife count: 4 pieces Counter-knife number: 1 pc. with cutting gap adjustment Feed unit: 2 x 5 rollers Drive: 250-500 kW Machine weight: approx. 30,000 kg

Bajler Zembrod Obelix built in 1990 smoldering 3m, complete with shinand and table

x-travel: 550 mm y-travel: 1200 mm z-travel: 450 mm control: 85er 8bit total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Emulsion fission system, oil-water separation system (for the de-oiling of condensation in compressors) The cost-effective and permanently reliable The solution to the problem is usually the oil/water Separation for dispersed condensates. that cleaned water complies with the legal Rules on channel discharge

We sell a wheel excavator ZM12 without motor

Filter capacity: 121 m² Air consumption: 13200 m³/h ventilator: 15 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 1600 mm, 3500 mm, 800 mm

For sale is: 1 Piece Used Face and Lace Lathe Manufacturer: Werkzeugmaschinenfabrik Zerbst GmbH Type: DP1 / S3 x 3500 Year of manufacture: 1994 Technical data: Largest turning diameter over bed: 1,600mm Center width: 3,500mm Spindle bore: 100mm Face plate diameter: 1,250mm Total mass of the machine: approx. 24.8t incl. documentation Further pictures and videos can be sent on request. The following things have been renewed/repaired on the machine in the last four years: At the end of 2022, the tailstock was completely overhauled. New bearing and new tip and lubrication. 2024 Cross Support regenerated. Refurbishment of the wedge strips with new sliding coating, snatchers on the guideways smoothed by scraping, Bearing seats of the spindles made smooth, wedge strips in the contact surface and covering surface scraped. Lubrication pump cle ...

Heating elements used in Kisters ZVT and ZEVA shrinktunnels. Various quantities and lengths (600, 700 and 1000 mm) and types (straight, bent, with and without wires) available: 240, 290 and 347 Volts, 2150, 3100 and 3500 Watts.

Zeiss LM 100 large inspection microscope The microscope has been used in the electronics industry, in the production of touch screens

with 14 shapes with 14 Forms

used shredder / shredder Manufacturer: ZENO Type: ZTLL 1600 x 1600 Year of construction: 2018 Operating hours: approx. 400 Specifications: Drive power: 2 x 55 kW Sieve: 35 mm hexagonal Screen design: solid screen basket, reinforced with ribs, including sieve quick-change device Counter knife: with cutting gap adjustment Hopper: 1,075 mm high, without lid with maintenance door and level sensor (Sonar Bero) Transmission: Compact gearbox with torque cut-off Filling opening: 1,600 x 1,600 mm Rotor speed: approx. 80 - 120 rpm Rotor aircraft: 600 mm Rotor design: 4 rows (76 pieces) positive inserts 60 x 60 mm on tool holders Rotor bearing: Standing bearing Machine floor and slide bottom: grooved Weight: approx. 13,400 kg Universally applicable shredder for a wide variety of materials The ZTLL shredder is the result of more than 35 years of kn ...

Frequency converter, frequency converter, drive converter, controller, variable speed drive, power supply -AC power source: ZAF 0.5/270/2 -Line In: 90-264 VAC 47-63 Hz -Output: 500 VA Max -Dimensions: 560/430/H95 mm -Weight: 18.6 kg

1 HOZA (Germany) pinking machine type ZEN 80 (Zigzag cutting), knife width 820 mm, working width up to 800 mm, new serrated knife with 6 mm serration gauge, machine equipped with precise hand lever feed mechanism, feed mechanism settable for 2 measures between 0-320 mm, with security light guards, 3 x 380 V, 50 Hz

Cell ARCK INGENIERIE with milling robot Staubli Opis:Year of construction: 2006 Robot: Staubli Unimation RX160 Control: CS8C 6 workpiece brackets

The Digiline Label Offline system makes it possible to pre-produce and serialize (pharmaceutical) labels quickly, abrasion-resistant and process-safe. In this way, the serialization process is decoupled from the dispensing process in terms of time and space. Machine incl. PLC OMRON. Output: 60 m/Min.

Change gear, change gears, gear -for: heavy-duty lathe Braun Zerbst -Number: 23 pieces change gears -Module: mm -Dimensions: 530/530/H735 mm -Weight: 144 kg

Interface converter, converter, module converter, FL Comserver, interface converter, interface converter, interface converter, -Manufacturer: RSF, Converter -Type: ZEV 5 Ord.-No. 14 369 519 -Number: 3x converter available -Price per piece -Dimension: 230/60/H35 mm -Weight: 0.3 kg/pc.

Joint burning machine Make Zechni Model Cimatic Year 1970? Width 490 mm Thickness up to 80 mm thickness Details Adjustable temp, pneumatic Available direct

Conveyor belt, Fabr. Zeva, rod tape 350 mm

Mold conveyor belt from Zela grease machine

Cable reel, cable unwinder, power cable reel, cable reel, workshop reel, cable drum, wall cable drum, workshop cable drum, wall reel -Manufacturer: Zeca, cable drum cable reel -Cable: 12-core, length: 50 m -Hole diameter: 180 x 10 mm -Dimensions: 715/480/H800mm -Weight: 73 kg

Pipe welding accessories, forming gas welding equipment, forming gas welding aid -Diameter: 600 mm -Rubber sealing lip -with transport rollers for disassembly from the pipe to be welded -Dimensions: 650 x 450 mm -Weight: 18 kg

Mobile multi-format machine for filling and closing vials and bottles with variable closing systems.. - Pick & Place Station Presskappe inkl. entsprechende RNA-Fördereinheit ab Vibrator (Schwingförderer) - Container size: up to 250 ml. Machine incl. feeding turntable, dosing system FLEXICON, capping system, PLC SIEMENS Simatic etc

Ref. -No.: 10157 Manufacturer: CARL ZEISS Year of construction: 1997 Type of control: HP 9000 Serie 700 Control: Betriebsystem HP-UX.9.05 Storage location: Halberstadt Country of origin: Deutschland Turntable: 1000x2100 mm Machine weight: 4.800 kg Machine Height: 3050 mm Table height above the floor: 850 mm X-Axis: 850 mm Y-Axis: 1800 mm Z-Axis: 600 mm Further information: Three coordinate measuring machine Microcomputer control X-axis as a longitudinally movable portal Y-axis cross slide in the portal Z-axis as measuring head quill (vertical) Passage between the portal approx. 1,000 / 1080 mm Passage in height approx. 750 mm

Brand: Zerma, model: GSL 300/800, motor: 18 Kw (25 hp), stepped rotor, year: 2003. With electrical panel and vacuum cleaner: 2.2 Kw (3 hp).