z knetmaschine used for sale

Round cylinders, pneumatic cylinders, standard cylinders, air cylinders, pneumatic punches, air punches, compact cylinders, short-stroke cylinders -Stroke: 300 mm -Piston diameter: 40 mm -Piston rod: 16 mm -Dimensions: 467/53/H53 mm -Weight: 2.25 kg

Control unit, control panel, control panel, control unit, keyboard, screen, control -Two-hand control panel with: foot switch -Dimensions: 460/370/H920 mm -Weight: 18 kg

x-travel: 4700 mm y-travel: 1000 mm z-travel: 1000 mm control: HEIDENHAIN TNC355 table-size: 5000x1000 mm T-slots: 7x mm turning speed range: 2800 U/min feed: 6-5000 mm/min rapid traverse: 15000 mm/min spindle motor: 30,00 kW spindle taper: SK 50 Table load: 10.000 kg Main drive: 40 PS weight of the machine ca.: 27,00 t dimensions of the machine ca.: m With HEIDENHAIN TNC 355 control. Machine can be inspected under power. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 550 mm y-travel: 1200 mm z-travel: 450 mm control: 85er 8bit total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 3.400 mm y-travel: 1.250 mm z-travel: 2.000 mm Control: TNC-430PA table-size: 4.700 X 1.200 mm V- travel: 500 tool taper: ISO 50 milling head -swivable: 0.001º/0.001º Grad main drive: 37 kW Chip coveyor: inkl handwheel: HR-410 Tools changer: 60 pos. milling head: Automatic Head 45º weight of the machine ca.: 35 t - Automatic Head 45º INCLUDED - Automatic Head 45º 0.001º/0.001º - Head 45º Max. Speed 3.000 rpm - 45º Head Taper ISO-50 - Twist Head Contiuous INCLUDED - Twist Head Max Speed 3.000 rpm - Twist Head Taper ISO-50 - Ram with Quill - Quill Diameter 150 mm. - Quill Taper ISO-50 - Pick up station AITEK for 45º and Twist Heads - Rotary Table ZEATZ Ø 1200 INCLUDED - RENISHAW MP 16+SP2/1 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

electric motor, three-phase motor -Power: 1.85/2.1/2.4 kW -Speed: 700/900/1435 rpm -Shaft: Ø 38 x 78 mm -Dimensions: 540/400/H400 mm -Weight: 92 kg

Reamer, twist drill, drill -Twist drills: different sizes on request -different manufacturers -Price: Ø 10 - 30 mm 0.50 EUR/mm (drill Ø 20 mm = 10 EUR net) -Price: Ø 31 - 45 mm 1 EUR/mm (drill Ø 35 mm = 35 EUR net) -Price: Ø 46 - 80 mm 1.60 EUR/mm (drill Ø 50 mm = 80 EUR net) -Two-cutter -Diameter: 10-80mm -different lengths -Recordings: MK1 - MK6 -Type: HSS

Gear motor, electric motor, electric gear motor -Speed: 2800/75 rpm -Power: 0.07 kW -Construction: B3 -Diameter shaft: 12 mm -Price: per piece -Number: 5x available -Dimensions: 250/160/H120 mm -Weight: 4.8 kg

x-travel: 22.000 mm y-travel: 1.500 mm z-travel: 3.000 mm Control: SIEMENS 840 D milling head -swivable: 0,001/0,001 Grad milling head: Universalfräskopf 45° Internal cooling system: 20 bar Chip coveyor: ja Tools changer: 30 pos. coolant: 1.100 l Tool taper: DIN 69871A ISO 50 total power requirement: 45 kW weight of the machine ca.: 68 t The round table shown in the pictures as well as the plate field are not sold with ! urning Speeds 6.000 r.p.m. AutoIndex Head 45 º Head 360.000 Pos. Elbow 360.000 Pos. Main Motor Power 37 Kw. Nº Change Range 2 Ranges Automatic Tool Charger INCLUDED Tools at ATC 30 Coolant Through Tool 20 Bar INCLUDED Soluble Oil Tank with filter paper INCLUDED Head Coolant System + CF Box INCLUDED Longitudinal Chip Conveyor INCLUDED Operator?s Platformd with 2000 mm Vertical movement. INCLUDED Ready for Rotor Translating Table (Regulator + Wires) /IN ...

- Hand & foot control - integrated ambos - solid substructure Specifications: - Hammer weight: 40 kg - Lifting height: 230 mm - Projection: 240 mm - Cylinder Ø: 140 mm - Motor power: 4 kW - Voltage: 400 V - Dimensions WxHxD: 700 x 1900 x 1200 mm - Weight: approx. 900 kg

Change gear, change gears, gear -for: heavy-duty lathe Braun Zerbst -Number: 23 pieces change gears -Module: mm -Dimensions: 530/530/H735 mm -Weight: 144 kg

Turnbuckle, turnbuckle, rope tensioner, threaded tensioner -Diameter: 1 1/2 inches -Tension lock: galvanized -Dimensions: 855/117/H58 mm -Weight: 13 kg

Gear motor, electric motor, three-phase motor -Speed: 4000/471 n/n1 -Power: 0.19 KW -Construction. B5 angle -Diameter shaft: 11 mm -Dimensions: 270/200/H130 mm -Weight: 5.5 kg

x-travel: 6000 mm y-travel: 2000 mm z-travel: 3000 mm Control: heidenhain TNC 415 total power requirement: 34 kW weight of the machine ca.: 31 t dimensions of the machine ca.: 7000 mm m Stocknumber 1110055 Type of machine CNC Floortype milling machine Make ZAYER Type KCU6000 Build in 1992 Type of control Heidenhain TNC 415 X-stroke (mm) 6.000 Y-stroke (mm) 2.000 Z-stroke (mm) 3.000 Speeds (Rpm) 20 - 1.800 Admission in spindlehead BT50 Feeds X (mm/R) 5 - 5000 mm/min Feeds Y (mm/R) 5- 5000 mm/min. Feeds Z (mm/R) 5- 5000 mm/min. Rapid feeds 10.000 mm/min. Total Power (KW) 34 Lenght (mm) 11.000 Width (mm) 2.500 Height (mm) 7.000 Weight 31.000 Kg Additional information Juaristi MG6 turntable: 1500 x 1200 mm Cooling system: 2.5 Bar Tool cooling: 15 Bar The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

We sell a wheel excavator ZM12 without motor

- 3-cheek lining - 4-cheek lining - fixed bezel - running bezel - 3-axis position display Sino SDS6-3V - Multifix Type E incl. 4 holders - Splash guard - Oil pan - Lighting system - Foot spindle brake - Coolant sealing - Steel stand with 3 drawers and cabinet door - Reduction sleeve - Spare gears Technical data: - Circulating Ø over bed: 360 mm - Circulation Ø over slide: 212 mm Ø without bridge: 490 mm - Center width: 1000 mm - Bed width: 187 mm - Spindle bore: 51 mm - Metric threads: 0.2 - 5 mm (28 steps) - Inch thread: 8 - 112 tpi (36 steps) - Module thread: 0.2 - 3 mm (22 steps) - Thread with diametrical slope: 8 - 112 dp (36 steps) - Longitudinal feed: 0.050 - 0.696 MM (36 steps) - Transverse feed: 0.013 - 0.188 mm (36 steps) - Tailstock Pinoleenaufnahme: MK3 - Tailstock Pinoleenhub: 100 mm - Motor power: 1.5 kW - Dimensions WxHxD: 1925 x 1510 x 75 ...

roll diameter: 76-86 mm Shaft diameter: 20 mm Shaft revolutions: 11 U/min Bending capacity round tube: 30 mm : 25x6 mm Angle iron: 20x20x4 mm Drive: 0,18 kW range L-W-H: 530x420x500 mm weight: 80 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Grinding range: 400 x 200 mm Magnet table: 400 x 175 mm Height adjustment: 410 mm Grinding wheel dimensions: 225 x 25 x 50.8 mm Grinding wheel speed: 1420 / 2840 rpm. Equipped with: - Coolant device - Band filter - Hydraulic system - Operating instructions Country of origin: Germany Motor power: 1.5 kW Machine LxWxH: 2200 x 1500 x 2100 mm Machine Weight: 1100 kg

Conveyor belt, belt conveyor, transport belt, belt conveyor -Belt width: 2x 50 mm -Width: adjustable -Conveyor belt length: 1440 mm -Drive: 0.37 kW -Speed: 71 rpm -Conveyor belt rotatable via servo motor -Height: adjustable -Dimensions: 1440/550/H950 mm -Weight: approx. 150 kg

- Sino SDS6-3V 3-axis position display - magnetic and manual spindle brake - 3 jaw chucks ø 250 mm - 4 jaw linings ø 320 mm - Stop Z-axis - fixed & running bezels - Multifix Type C incl. 4 holders - Flat disc ø 430 mm - Lighting system - Coolant sealing Specification - Tip width: 2000 mm - Circulating Ø over bed: 600 mm - Circulation Ø over slide: 360 mm - Circulating Ø in eruption: 730 mm - Bed width: 330 mm - Spindle bore Ø: 80 mm - Spindle cone: Metric 80 C8 / D1 - D8 - Speed range: 24 - 1600 rpm - Speed levels: 15 - Metric threads: 0.5 - 28 mm (66 steps) - Inch thread: 1 - 56 tpi (66 steps) - Module thread: 0.5 - 3.5 mm (33 steps) - Thread with diametrical slope: 8 - 56 dp (33 steps) - Longitudinal feed: 0.072 - 4.038 mm/U (66 steps) - Transverse feed: 0.036 - 2.019 mm/U (66 steps) - Tool holder: 25 x 25 mm - Tailstock Pinole Ø: 65 mm - Tailstock ...

Model: Vision FD Vario 3D YOM: 2011 Availability: In Stock ID Number: SMS00364 S/N: 90643 Tube Type: GF-181-06-125-65 Tube Housing: Vision Pluse 3-110 Tube YOM: 2011 (Original tube) Condition: Complete and fully functional

Heating elements used in Kisters ZVT and ZEVA shrinktunnels. Various quantities and lengths (600, 700 and 1000 mm) and types (straight, bent, with and without wires) available: 240, 290 and 347 Volts, 2150, 3100 and 3500 Watts.

Gear motor electric motor Electric gear motor -Speed: 165 rpm -Power: 0.33 kW -Construction: B5 angle -Diameter shaft: 15 mm -Protection class: IP 44 -Price: per piece -Number: 1x available -Dimensions: 360/180/H190 mm -Weight: 11 kg

- Pressing force: 1500 kN - Pressure: 300 Mpa - Piston stroke: 300 mm - Downward speed: 9.8 mm/s - Working speed: 2.6 mm/s - Return speed: 13 mm/s - Passage: 1550 mm - Table dimensions: 1530 x 500 mm - Table height adjustment: 750 mm / 5 steps - Stop adjustment: 400 mm - Pressure stamp Ø: 2x 150 mm - Guide piston Ø: 70 mm - Motor power: 7.5 kW - Connection voltage: 400 V - Dimensions WxHxD: 2150 x 2050 x 1000 mm + 750 x 1100 x 750 mm - Weight: 1800 kg

Ball valve, ball valve internal thread -Pressed brass -Internal thread: 2 inches -full: passage, full ball -Number: 63x ball valves available -Price: per piece -Weight: 2.1 kg

geared motor, electric motor -Speed: 40/80 rpm -Power: 0.6/1.0 kW -Design: B5 -Shaft diameter: Ø 48 mm -Protection class: IP 44 -Price: per piece -Quantity: 1 available -Dimensions: 655/250/H320 mm -Weight: 53.5 kg

- Pressing force: 1000 kN pressure: 289 bar - Piston stroke: 300 mm - Downward speed: 10.5 mm/s - Working speed: 2.7 mm/s - Return speed: 15 mm/s - Passage: 1050 mm - Table dimensions: 1030 x 460 mm - Table height adjustment: 600 mm / 5 steps - Stop adjustment: 400 mm - Pressure stamp Ø: 110 mm - Guide piston Ø: 60 mm - Motor power: 7.5 kW - Connection voltage: 400 V - Dimensions WxHxD: 2000 x 2150 x 900 mm - Weight: 1250 kg

Gear motor, electric motor -Speed: 40/80 rpm -Power: 0.7/0.91 kW -Construction: B5 -Shaft diameter: Ø 48 mm -Protection class: IP 44 -Price: per piece -Number: 1x available -Dimensions: 685/240/H320 mm -Weight: 60 kg

Spindle for plate boring mill, table boring mill, boring mill, milling machine, quill, boring head, Replacement spindle -SK50 holder for: screwing onto the faceplate -Adjustment: SK50 -Dimensions: 220/220/H160 mm -Weight: 20 kg

Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 63 rpm -Power: 0.8 kW -Construction: B3 -Shaft: Ø 38 x 80 mm -Protection class: IP 44 -Dimensions: 450/250/H280 mm -Weight: 36 kg

2 cyclones as good as new Type AKA VORTEX Twin TRT 4118 Throughput per twin 95m3/h total 190m3/h Diameter 200mm, cutting cut approx. 50my 1 pcs new cyclone Type AKA Vortex KRS3128 II 40m3/h DM 150 mm All cyclones including overflow line and shut-off valve If required, a refurbished PUMP METSO VASA is also available Drive 30 kW available are also handed in individually

Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 16/31.5 rpm -Power: 0.3/0.55 kW -Construction: B3 -Shaft: Ø 48 x 110 mm -Protection class: IP 44 -Number: 1x available -Price: per piece -Dimensions: 580/250/H270 mm -Weight: 43 kg

Gear motor, electric motor -Motor comes from: Gansow scrubber dryer -Connection: 24 volts -Speed: 160 rpm -Power: 1 kW -Shaft diameter: Ø 25 mm -Number: 8 available -Price: per piece -Dimensions: 390/140/H160 mm -Weight: 13 kg

scoring head, glass cutting table, glass cutting table, glass cutting machine -Number: 21x scoring heads available -Manufacturer: Eitzenberger Luftlagertechnik GmbH -Item no.: 093329 -Price per piece -Dimensions: 310/160/H60 mm -Weight: 0.5kg/pcs

Zeiss LM 100 large inspection microscope The microscope has been used in the electronics industry, in the production of touch screens

USED SIHI ZSKQ 2501 DN90L-2 REFRIGERATED CENTRIFUGAL PUMP

Centrifugal pump of the ZLND series from the manufacturer STERLING SIHI

- Sino SDS6-3V 3-axis position display - magnetic and manual spindle brake - 3 jaw chucks ø 250 mm - 4 jaw linings ø 320 mm - Stop Z-axis - fixed & running bezels - Multifix Type C incl. 4 holders - Face disc - Lighting system - Coolant sealing Specification - Center width: 1000 mm - Circulating Ø over bed: 500 mm - Circulation Ø over slide: 325 mm - Orbital Ø in eruption: 630 mm - Bed width: 330 mm - Spindle bore Ø: 80 mm - Spindle cone: Metric 80 C8 / D1 - D8 - Speed range: 24 - 1600 rpm - Speed levels: 15 - Metric threads: 0.5 - 28 mm (66 steps) - Inch thread: 1 - 56 tpi (66 steps) - Module thread: 0.5 - 3.5 mm (33 steps) - Thread with diametrical slope: 8 - 56 dp (33 steps) - Longitudinal feed: 0.072 - 4.038 mm/rev (66 steps) - Transverse feed: 0.036 - 2.019 mm/rev (66 steps) - Tool holder: 25 x 25 mm - Tailstock Pinole Ø: 65 mm - Tailstock pinole ...

USED PANDA WV 1000 C 0EC ZZTZ BUSCH VACUUM PUMP

USED STERLING SIHI GMBH ZTNC 50200 AA 002 1B 2 CENTRIFUGAL PUMP

with 14 shapes with 14 Forms

Very high-quality CNC – controlled two-unit double mitre precision circular sawing machine (heavy version - 2,500 kg dead weight) Brand new, immediately available from stock (subject to prior sale) For precise and rational cutting even of large and heavy profiles made of aluminium - non-ferrous metals - various plastics. The machine can be used both for single cutting - when cutting with two sawing units at the same time (smallest section length 370 mm / largest section length 6,000 mm) or in automatic mode – when used as single-unit circular saw machines, so that Section lengths from 5 mm to 15,000 mm and longer possible. Three CNC axes, electronic inclination of the saw units infinitely variable over the entire inclination range. SCHNEIDER® feed motors and electronic motor controllers. CNC control with Windows 10 operating system and 10.4" color di ...

Тип: Z4A Число осей/ шпинделей Доступны различные варианты головок 4x3 Расстояние между крайними шпинделями 2300 mm Регулируемая скорость сверления Высота стола от пола 840 mm Размеры стола 600x2350 mm Число прижимов 8 Мощность двигателя 6 kW(4x1,5) 400 V Скорость двигателя 2840 r.p.m Необходимое давление воздуха 6-8 bar Вес 425 kg Размеры для транспортировки 2450x960x1550 mm

Circuit board for glass cutting table, glass cutting table, glass cutting machine -Manufacturer: INNOLAS -Type: ZSB circuit board Impala 6x -Weight: 0.1 kg

Scoring circular saw blade, scoring circular saw blades -two-piece, adjustable: 120 x 2.8-3.6 mm -for: Scoring sheet materials, laminates, ... -carbide-tipped -Weight: 0.3 kg

Material: PE, PP, PS, ABS // Details: DC motor, segmented screws and cylinders, screw speed max. 300 rpm, degassing, vacuum pump, mass pressure and mass temperature sensors, strand head, control cabinet for heating and motor control. Screw Ø: 2x 67 mm L/D: 34:1 Motor: 97.5 kW (DC)

-Thermal oil magnetic pump with motor -Pump manufacturer Sterling Fluid Systems Model: ZTTZ 40160 / AP 1EO 1B 2 Engine see pictures

Scoring circular saw blade, scoring circular saw blades -two-part, adjustable: 120 x 2.8-3.6 mm -for: Scoring sheet materials, laminates, ... -carbide-tipped -Weight: 0.3 kg

Scoring circular saw blade, scoring circular saw blades -two-part, adjustable: 120 x 2.8-3.6 mm -for: Scoring sheet materials, laminates, ... -carbide-tipped -Weight: 0.3 kg

Scoring circular saw blade, scoring circular saw blades -two-part, adjustable: 120 x 2.8-3.6 mm -for: Scoring sheet materials, laminates, ... -carbide-tipped -Weight: 0.3 kg