z knetmaschine used for sale

Size: 0x0 Equipments: Mechanical speed: 250 pieces/hour

pressure: 160 t stroke: 500 mm total power requirement: 20,5 kW weight of the machine ca.: 7,5 t Rated force: 160 Mp (˜ 1600 kN / 160 tons) Operating pressure: 144 kp/cm² Speed: Downward: 200 mm/s Upward: 250 mm/s Ram stroke: 500 mm Throat depth: 360 mm Max. distance (table to ram): 800 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Size: 0x0 Equipments: Mechanical speed: 250 pieces/hour

1.) Sumbel Herold 2.)Zechini Ottima 74 Roller press Year 2000 Size 74cm Roller pressing unit to press together paper, cardboard, material, leather, plastic, corrugated carton, etc. Max material thickness: 3,5 mm. Dimensions: 96 x 85x 105h cm Net weight: 119 kg 3.) Schmedt Präkant 6201 Turning-in machine Schmedt Präkant 0601, good condition, cleaned and checked, max.size 600x600mm, min,150x150mm, max. board thikness 6mm, min.1,5mm.

Size: 0x0 Equipments: Maximum mechanical speed: 250 pieces/hour

Size: 0x0 Equipments: Speed: Machine output: 360 cycles/hour

Size: 355 x 760 mm Equipments: Technical data: Minimum envelope size: 100 x 216 mm Maximum envelope size: 355 x 760 mm

Size: 0x0 Equipments: Mechanical speed: 300 cycles/hour

: neu : Bulgarien : 53750 € : 1015.88 € : 630 mm : 2000 mm : 315 mm : 103 mm : 430 mm : 400 mm : 11 : 120 MK : 21 : 12,5 - 1250 1/min : 120 : 0.04 - 12 mm/U : 0.02 - 6 mm/U : 0.5 - 120 mm : 60 - 1/4 Gänge/ : 0.125 - 30 : 240 - 1 : 315 mm : 90 mm : 90 mm : 5 MK : 230 mm : 11 kW : 3310 kg driven by manual transmission 3-axes digital readout quick change toolpostAmestra with 4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 315 mm spindle dead center longitudinal stop for 1 position coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock low voltage machine lamp operating manual machine according to ",CE", FURTHER TURNING LENGTHS: turning length1.000 mm € 50 880,00 turning length1.500 mm € 51 960,00 turning length3.000 mm € 58 400,00 tur ...

Item No. ZENIT400-30-ST - Filter rack complete with wine thread and end plates - without filter plates - Filter requires an odd number of filter plates - 1 year functional warranty

ZENO shredder type ZTLL 3000 x 2500 For crushing PVC window frames Capacity approx. 10 t/h with screen perforation 50 mm Ø Inlet cross-section: 3000 x 2500 mm Drive: 2 x 132 kW, gearbox with torque cut-off Rotor flight circle: 750 mm Rotor speed: approx. 80 rpm Rotor design: 4 rows (180 pcs.) positive inserts, 80 x 80 x 45 mm on tool holders Rotor Bearing: Pillow Block Bearing Rotor body: hardfaced (wear protection) Water spraying funnel: flat jet nozzles, à 3 l/min at 3 bar Screen design: solid screen basket, reinforced with ribs, with screen quick-change device Counter blade: with cutting gap adjustment and foldable Side walls in the rotor area: replaceable, Hardox material Hopper: 1300 mm high, flared on 4 sides, double-walled with concrete filling, without lid Machine weight: approx. 43,000 kg Control cabinet (loose, for controlling the machine, incl. soft sta ...

Technical data: Manufacturer: Zeiss Type: O-Select Year of Make: 2015 Measuring range X/Y/Z: X 114 mm, Y 91.5 mm, Z 65 mm Condition Condition: Used Functional: Tested and fully functional Other equipment and accessories included: Megapixel camera with CAA corrected optics Integrated control for autofocusing Integrated transparency table Workstation Z230 SFF Power C1/HP with 23" touch monitor with software Zeiss O-Select data system

wire diameter 0,1-0,5 mm spring diameter 1-5 mm feeding length 1000 mm output - pieces/min 70

with washer assembly diameter range 10 mm shaft length under head 100 mm max. thread length 65 mm output pieces/min 180

vibratory feeder diameter range 10 mm shaft length under head 100 mm max. thread length 65 mm output pieces/min 180

vibratory feeder diameter range 6-12 mm shaft length under head 170 mm max. thread length 102 mm output pieces/min 125

Used paddle mixer in acid-resistant design with a capacity of 1700 liters. Italian-made mixer manufactured by Zanelli. Internal dimensions of the device: diameter 1.2m, length 1.5m.

Ex-protected rotary valve, ZRD 200 1-5-GC, Coperion, new -40% Special price If you have a VAT number, we will be happy to issue you with an invoice without VAT. New! - never been used and is completely new, - comes from a spare parts warehouse of a certified production facility, Technical specifications: - Explosion-proof rotary valve for granules, model ZRD 200 1-5-GC, Coperion, new -40%, - Explosion-proof design, Up to max. 60°C, - Powder and granules, aluminium dust containing steel and stainless steel, - designed for a bulk density of 350 kg/m³, max. 450 kg/m³ - Without drive and bearing air purge (quote available), - Housing material: grey cast iron, rotary valve: steel, - Inlet and outlet: DN200, - Please feel free to ask us for the specifications, - Viewings are available at any time, 6 months warranty We give you 6 months warranty for these goods  ...

Second Hand Oil-Free Screw Compressor Atlas Copco ZT75VSDFF Inverter and dryer integrated 75 kW 8.75 bar 13.20 m3/min Year of Make: 2008 Hours: 63,129

Compressed air filters, fine filters, filters, flange filters -Manufacturer: Zander, flange filter type F17 -Filter type: F 17 XA D 1st stage/filter element 3075 X -Content: 20 liters -Operating pressure: 16 bar -Connection: DN 80 -Price per piece - Quantity: 2 pieces -Dimensions: 380/300/H1170 mm -Weight: 72kg

Compressed air filters, fine filters, filters, flange filters -Manufacturer: Zander, flange filter type F17 -Filter type: F 17 XA D 2nd stage / Filter element 3075 A -Contents: 20 liters -Operating overpressure: 16 bar -Connection: DN 80 -Price: per piece -Quantity: 2 pcs. -Dimensions: 380/300/H1170 mm -Weight: 72 kg

Stainless steel, VA, chrome-nickel steel, material cuts, stainless steel, chrome steel, rust-free -Material: cutting and manufacturing -Round steel, tubes and sheets -different materials: in stock -Material numbers: 4301, 4541, 4571, 1.4828, 1.4876, 1.4841, 1.4878 -Please ask for the material you want with the dimensions. -Price from: per kg and cut depends on material

geared motor, electric motor -Handover: in its current condition as inspected -Brake: not working -Speed: 80/40 rpm -Power: 1.0/0.6 kW -Design: B5 -Shaft diameter: 48 x 110 mm -Protection class: IP 44 -Price: per piece -Quantity: 2 pieces -Dimensions: 690/251/H320 mm -Weight: 55 kg

Steel products, flat steel, round steel, bar steel, tubes, profile tubes, square tubes, rectangular tubes, sheets, shaped steel, wide flange beams, narrow flange beams, plates, structural steel, rolled steel, drawn steel, I-beams -For our customers in the area, we offer material cut-to-size and contract manufacturing and a large selection of materials in stock -Sheets, pipes, profiles, bars and sections made of steel, stainless steel and non-ferrous metals such as aluminum, brass and gunmetal

Industrial vacuum cleaners, vacuum cleaners, dust extractors, industrial vacuum cleaners, floor vacuum cleaners, safety industrial vacuum cleaners -EX: protected -Manufacturer: Nilfisk, ultra-compact industrial vacuum cleaner with side channel blower -Type: CTS22 H Z22 -Connection: 400 volts -Power: 2.2 kW -Number: 3 devices available -Price per piece -Dimensions: 1100/770 / H1270 mm -Weight: 127 kg / piece

Fan, fan, electric motor, blower, electric motor, blower, centrifugal fan, emergency ventilation fan, flue gas fan, ventilation fan, exhaust gas extraction -Manufacturer: Ziehl-Abegg, centrifugal fan type DKHR 310-4 -Speed: 1370 rpm -Lesitung: 0.15 kW -Protection rating: IP 44 -Quantity: 12x blowers available -Price per piece -Dimensions: Ø 310 x 165 mm -Weight: 5.5 kg/pc.

Gear motor, electric motor -Motor comes from: Gansow scrubber-dryer -Connection: 24 volts -Speed: 180 rpm -Power: 0.5 kW -Construction: B5 -Diameter shaft: Ø 25 mm -Protection class: IP 44 -Number: 3x gear motors available -Price: per piece -Dimensions: 345/130/H165 mm -Weight: 12 kg

Roller conveyor, roller track, powered roller conveyor, roller track -with pneumatically driven centering unit -stable design -electrically powered -Drive motor: 0.18 kW 76 rpm -Conveyor speed: 25.05 m/min -Roller width: 1000 mm -Conveyor length: 1400 mm -Roller diameter: 105 mm -Rollers: rubberized -Shaft diameter: 25 mm - Delivery height: 960 mm, adjustable -driven: via belt -Number: 3x roller conveyors available -Price: per piece -Dimensions: 1400/1150/H960 mm -Weight: approx. 230 kg

Fan, ventilator, electric motor, blower, electric motor, blower, radial fan, emergency ventilation fan, flue gas fan Manufacturer: Ziehl-Abegg, radial fan type DKHR 560-6-6 -Speed: 855/625 rpm -Power: 0.47 kW -Fan diameter: 570 mm -Protection class: IP 44 -Number: 5x radial fans available -Price: per piece -Weight: 16.5 kg

Universal milling head, milling adapter, milling extension, angle milling head -Spare part: from a Stankoimport milling machine -Milling head: with quill -Recording: Exit -Recording: Entrance -completely swiveling -impact head -Equipment -Pitch circle -Dimensions: 1200/800/H300 mm -Weight: 200 kg -Sale only in full

Geared motor, electric motor, electric geared motor -Geared motor: with electric clutch -Engine VEM Type: KPER 90 L 4 -KEB gearbox type: ZG2IE0F90A200 -Speed: 79 rpm -Power: 1.5 kW -Design: B3 -Shaft: Ø 32 mm -Protection class: IP 55 -Quantity: 1 available -Price: per piece -Dimensions: 815/210/H260 mm -Weight: 53 kg

Geared motor, electric motor, electric geared motor -Speed: 50 rpm -Power: 0.25 kW -Design: B5 -Shaft diameter: 28 mm -Protection class: IP 54 -Outer flange: Ø 160 mm -Recess: Ø 110 mm -Price: per piece -Quantity: 2 available -Dimensions: 405/160/H215 mm -Weight: 14.2 kg

adjustable gear motor, variable speed gear motor, electric motor -Manufacturer Lenze type variable speed gear: 155-ZNA0-80-4 -Motor power: 0.75 kW -Speed range: 11.5-59 rpm -Speed: adjustable -height shaft axis: 120 mm -Drive shaft: O 25 mm -Construction: B3 -Number: 1 motor available -Dimensions: 390/400/H215 mm -Weight: 31.9 kg -Function tested

Gear motor, electric motor -Manufacturer gearbox Motovario type: NMRV040 -Manufacturer engine Seipee type: ZKF71C2.4 -Speed: 282/566 rpm -Power: 0.37/0.55 kW -Construction: B14 angle -Diameter hollow shaft: Ø 18 mm -Protection class: IP 54 -Brake -Dimensions: 430/160/H185 mm -Weight: 14.3 kg

Geared motor, electric motor, electric geared motor -Engine manufacturer: VEM -Manufacturer of gearbox: VEM -Speed: 315 rpm -Power: 1.1 kW -Design: B5 -Bolt circle: Ø 165 mm -Recess: Ø 130 mm -Shaft diameter: 28 mm -Protection class: IP 44 -Number: 2x motors available -Price: per piece -Dimensions: 430/198/H250 mm -Weight: 29 kg

Backhoe bucket, excavator bucket, demolition bucket, trenching bucket -Execution: very stable -Width: 850 mm -Height: 1060 mm -Depth. 1600 mm -Zeppelin quick change adapter NADO -ripping teeth -Number: 2x excavator buckets available -Price: per piece -The mounting on the spoon can be changed by us at an additional cost -Dimensions: 850/1600/H1060 mm -Own weight: 600 kg

Gear motor, electric motor, electric gear motor -Engine manufacturer: VEM -Manufacturer gearbox: VEM -Speed: 31.5 rpm -Power: 0.8 kW -Construction: B3 -Diameter shaft: 48 mm -Protection class: IP 44 -Number: 1x motors available -Price: per piece -Dimensions: 580/250/H300 mm -Weight: 41 kg

Gear motor, electric motor, three-phase motor, electric gear motor -Manufacturer gearbox Kollmann type: ZS4-B3 -Manufacturer Motor Garbe Type: 90L8/4 -Speed: 25/50 rpm -Power: 0.55/0.75 kW -Construction: B3 -Diameter shaft: Ø 35 mm -Protection class: IP 33 -Dimensions: 530/250/H270 mm -Weight: 48 kg

adjustable gear motor, variable speed gear motor, electric motor -Manufacturer variable speed gear Lenze type: 155-ZNA0-80-4 -Manufacturer Motor Hanning type: 8F4-083 -Motor power: 0.75 kW -Speed range: 35-189 rpm -Motor: adjustable -Height shaft axis: 115 mm -Drive shaft: Ø 25 mm -Number: 1 piece of motors available -Price: per piece -Dimensions: 400/450/H220 mm -Weight: 31 kg

Gear motor, electric motor, three-phase motor, angular gear motor, electric gear motor -Speed: 21/43 rpm -Power: 1/1.5 kW -Construction: B3 -Shaft diameter: Ø 48 mm -Protection class: IP 54 -with electrical separating coupling KEB type: Combibox -Dimensions: 830/243/H300 mm -Weight piece: 70 kg

adjustable gear motor, variable speed gear motor, electric motor -Manufacturer variable speed gear Lenze type: 155-ZNA0-80-4 -Manufacturer Motor Dietz type: D48L -Motor power: 0.75 kW -Speed range: 21-118 rpm -Motor: adjustable -height of the shaft axis: 120 mm -Number: 1 motors available -Price: per piece -Drive shaft: Ø 25 mm -Dimensions: 390/400/H250 mm -Weight: 31 kg

Gear motor, electric motor, three-phase motor, electric gear motor -Engine manufacturer: VEM -Manufacturer gearbox: VEM -Speed: 40 rpm -Power: 1.5 kW -Construction: B5 -Diameter shaft: 48 mm -Protection class: IP 54 -Number: 2x motors available -Price: per piece -Dimensions: 620/250/H280 mm -Weight: 45 kg

Geared motor, electric motor, three-phase motor, electric geared motor -Engine manufacturer: VEM -Manufacturer of gearbox: VEM -Speed: 50 rpm -Power: 1.5 kW -Design: B5 -Shaft diameter: 48 mm -Protection class: IP 54 -Number: 1x motor available -Dimensions: 620/250/H280 mm -Weight: 45 kg

adjustable gear motor, variable speed gear motor, electric motor -Manufacturer variable speed gear Lenze type: 155-ZNA0-80-4 -Manufacturer Motor Dietz type: DR80/b/4n -Motor power: 0.75 kW -Speed range: 12-67 rpm -Motor: adjustable -height of the shaft axis: 120 mm -Number: 1 piece of motors available -Price: per piece -Drive shaft: Ø 25 mm -Dimensions: 415/200/H400 mm -Weight: 35 kg

Geared motor, electric motor, stop motor, drive motor, electric geared motor, three-phase motor -comes from a Homag double-sided edgebanding machine -Power: 0.18/3 kW -Speed: 7/320 rpm -Design: B5 -Shaft diameter: Ø 30 mm -Protection class: IP 54 -Motors separated by a 24-volt coupling -Number: 2x geared motors available -Price: per piece -Dimensions: 650/320/H230 mm -Weight: 35 kg/piece

Pneumatic cylinders, air cylinders, pneumatic rams, air rams -Transfer: in the current condition as seen -Vacuum suction cup: with damage -Version: with vacuum suction cup, equipped with directional valve and induction knife for the stroke -Stroke: 70 mm -Sucker: Ø 125 mm -Piston rod: 20 mm -Total length: 420 mm -Total length extended: 490 mm -Number: 31 pieces available -Price per piece -Dimensions: 420/140/120 mm -Weight: 4 kg/piece

Conveyor belt, belt conveyor, conveyor belt, belt conveyor -Pneumatically driven with centering unit -Belt width: 2 x 30 mm -Width: adjustable -Conveyor belt length: 1450 mm -with frequency converter in the gear motor -Drive: 0.075-0.37 kW -Speed: 14-72 rpm -Height: adjustable -Dimensions: 1580/1380/H1250 mm -Weight: approx. 300 kg

Roller conveyor, roller track, powered roller conveyor, roller track -with pneumatically driven centering unit -stable design -electrically powered -with frequency converter in the geared motor -Drive: 0.075-0.37 kW -Speed: 14-72 rpm -Roller width: 820 mm -Conveyor length: 1140 mm -Roller diameter: 105 mm -Rollers: rubberized -Shaft diameter: 25 mm -Delivery height: 1200 mm, adjustable -driven: via belt -Dimensions: 1150/1140/H1200 mm -Weight: 230 kg

Conveyor belt, belt conveyor, conveyor belt, belt conveyor -Pneumatically driven with centering unit -with lifting unit -Belt width: 2x 30 mm -Width: adjustable -Conveyor belt length: 1950 mm -with frequency converter in the gear motor -Drive: 0.075-0.37 kW -Speed: 14-72 rpm -Height: adjustable -Dimensions: 1950/1120/H960 mm -Weight: approx. 300 kg

Double-end tenoner, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor -Power: 3.7 kW at 2880 rpm at 50 Hz -Power: 5.2 kW 5870 rpm at 100 Hz -Voltage: 220/380 volts -Receiving shaft: Ø 40 mm -Tool: electrically movable -Tool: Ø 180 x 28-48 mm -Dimensions: 830/400/H200 mm -Weight: 70 kg