z kneader used for sale

MACHINE FOR TESTING WITH COMPUTER AND ACCESSORIES. CALIBRATION CERTIFICATION CN 200

Chopper Zeno Waste shredders slow-running Type ZTLL 1200 / 1600 Built in 1994 in very good condition Rotor width 1200 mm Hopper opening 1600 mm x 1200 mm Motor power 30 kW Hydraulic motor 2.2 kW with hydraulic walking floor Chopper blade rotatable, so it can be used 2 times Approx. 24 pieces of chopping knife Screen hole size approx. 20 mm With control cabinet Capacity depending on material approx. 6 – 10 m³/h Weight approx. 4,600 kg Dimensions approx. 3400 mm x 2300 mm x H 1900 mm

ZIPPEL REMA K1 400 3 LB Industrial parts cleaning plant (washing plant) Year of construction 2013 Washing, rinsing Drying in a continuous system with washing basket to remove oils, chips and dirt from workpieces before further processing or assembly. Approval according to WHG. System still under power. Machine description – see PDF. All technical information, illustrations and content are non-binding and without guarantee. Subject to changes and errors. All other accessories visible in the photos are not included in the scope of delivery, therefore not a component for this sale. The scope of delivery only includes the accessories that are expressly listed here, in the order confirmation and invoice. EXW (Ex Works) D-92729 Weiherhammer Exclusively dismantling, spreading and loading Delivery time immediately Subject to prior sale / payment immediately upon completion  ...

used RAS channel folding machine, with seal set, auto-pilot Machine is repaired, checked, cleaned by a specialist and is then fully functional. Test run is being carried out Sheet thickness max. steel 0.5 - 1.0 mm Smallest duct cross-section 100 x 100 mm Throughput speed approx. 15 m/min Support height up to approx. 700 mm Support length inlet/outlet approx. 1500 mm Support Arms 2 x 3 Working height approx. 800 mm Machine length approx. 5350 mm Machine width approx. 1000 mm Weight approx. 710 kg Drive power max. 5.5 kW Machine number 8826

Orange juicer with automatic fruit feed, This automatic juicer from Zummo takes the oranges from the basket on top, cuts them in half and squeezes them between two cups. The juice runs out through the tap into your jug or bottle, and the peels drop into the bins in the base cabinet. Suited to fresh juice in kitchens, hotels, canteens or small-scale production., The juicer sits on a stainless steel base cabinet on castors. We have not been able to confirm the exact model or the year of manufacture., Located in Emmeloord, the Netherlands. Immediately available, price on request., More photos and full specifications: stcfoodsolutions.nl/en/machine/zummo-automatic-orange-juicer/, Type: Automatic citrus juicer, Feed: Fruit basket on top, Controls: Display with on/stop/select buttons, Construction: On stainless steel cabinet with castors and peel bins

Stainless steel cooking kettle by Zanussi, This Zanussi cooking kettle is a jacketed kettle on legs, built entirely in stainless steel. The lid is hinged and has a handle with a catch. A draw-off tap at the front lets you empty the kettle without tilting it., The control panel has a thermostat knob, a second control knob and a gauge. The type plate is no longer legible, so capacity, year and connected load are not established; we are happy to check that for you., Located in Emmeloord, the Netherlands. Immediately available, price on request., More photos and full specifications: stcfoodsolutions.nl/en/machine/zanussi-cooking-kettle/, Type: Cooking kettle, jacketed, Lid: Hinged, with handle and catch, Draw-off: Tap at the front, Controls: Thermostat knob, control knob and gauge, Construction: Stainless steel, on legs

workpiece diameter:5-125 mm grinding depth:50-1000 mm clamping length:1000 mm total power requirement:1.9 KVA weight of the machine ca.:630 kg max. workpiece weight:100 kg Center Hole Grinding Machine. Workpiece must be rotated by machine during grinding

measuring range X-axis:200 mm measuring range Y-axis: mm Table dimensions: mm measurement range Z =:600 mm tool diameter:max. 250 mm tool taper:50 (SK40, HSK63, CT with adaptor) SK compressed air:4-6 bar dimensions:2 x 0,9 x 2 m machine weight ab.:400 kg Mounted on 1 cabinet, equipped with 2 monitors, with keyboard, 1 control computer, 1 operating data printer

max. wheel diameter:150 mm gear width: mm max. module:3,5 min. module:1,25 total power requirement: kW weight of the machine ca.:6,5 t dimensions of the machine ca.:2,35 x 2,10 x 2,35 m Width of teeth:45 mm boring diameter:100 mm surface area:1300 x 300 mm

grinding length:600 mm centre height:180 mm swing dia.:360 mm workpiece weight:80 kg max. dia. of grinding wheel:500 mm grinding wheel width:80 mm grinding wheel hole diameter:203,2 mm peripheral speed:45 m/sec There is also a 3200 liter coolant tank including cooling unit + fire extinguishing system.

grinding length:1370 mm grinding width:560 mm workpiece height:800 mm total power requirement:50 kW dimensions of the machine ca.:9 m ABA Z&B 2000, profile grinding machine with swivel dresser Mounting fixtures: magnet, dividing head E-axis dresser B-axis dividing head

max. wheel diameter:300 mm gear width:100 mm max. module:5 workpiece turning speeds:0 - 1000 1/min work piece - max.:1100 mm workpiece clamping:auto. tension device number of spindle speeds:1000 1/min. spindle bearing diameter:100 mm diameter of spindle flange:120 mm tailstock travel:80 mm weight of the machine ca.:3500 KG dimensions:1200 x 1450 x 2250 mm total power requirement:10 kVA The Gear Tooth Deburring machine WERA, ZEM 300 for deburring of splines gear wheels and shafts, with Pointing Facility. Texte, Bilder, Grafiken, Layout, Strukturen und Algorithmen etc. unterliegen weltweitem Urheberrecht. Unerlaubte Verwendung der Daten, werden sowohl strafrechtlich als auch zivilrechtlich verfolgt. Das ausschließliche Urheber- / Nutzungsrecht dieser Daten wurde nachfolgender Person eingeräumt. Copyright © 2005-2026, Josef Weber. All rights reserved.

max. wheel diameter:300 mm gear width:100 mm max. module:5 workpiece turning speeds:0 - 1000 1/min work piece - max.:1100 mm workpiece clamping:auto. tension device number of spindle speeds:1000 1/min. spindle bearing diameter:100 mm diameter of spindle flange:120 mm tailstock travel:80 mm weight of the machine ca.:3500 KG dimensions:1200 x 1450 x 2250 mm total power requirement:10 kVA The Gear Tooth Deburring machine WERA, ZEM 300 for deburring of splines gear wheels and shafts, with Pointing Facility.

workpiece diameter:63,5 mm centre distance:350 mm honing length max.: mm total power requirement: kW weight of the machine ca.:6 t dimensions of the machine ca.:2,70x2,30x2,60 m Technical data G0504 working space Length of the clamping surface mm 1550 Number of T-slots mm 2 Width of the T-slots mm 18 Distance between T-slots mm 180 Center height (tailstocks) mm 350 Swivel range of the fine wheel head (U-axis) degrees + 30 / -30 Center distance - tailstock / fine wheel min./max. mm 120/225 Input resolution (all NC axes) mm / degrees 0.001 Delivery slide Movement range (= Z-axis travel) mm 105 Input resolution mm 0.001 tool Outside diameter min./max. mm 225/275 Hole diameter mm 160 Width mm 60 workpiece Outside diameter min./max. mm 40-150 Module min./max. mm 1.25-4.0 Tooth width max. Mm 45 weight Weight of the machine approx. Kg 5500 Operating fluid requirements Cooling lubricant recomme ...

pressure:250 t passage width:1280 mm stroke:bis 500 mm total power requirement:47 kW weight of the machine ca.:23 t dimensions of the machine ca.:2200 x 1850 x 4600 mm table surface area:1250 x 1000 mm dayligth:800 mm daylight between the side columns:520 x 750 mm table height above floor:1000 mm Documents: vorhanden

grinding length:600 mm grinding width:250 mm workpiece height:380 mm :Sinumerik max. dia. of grinding wheel:300 mm weight:4000 kg total power requirement:12,5 kW grinding wheels:Ø 400 mm max. width of grinding wheel:100 mm grinding wheel hole diameter:127 mm turning speeds:470 - 12030 1/min x-axis:600 mm y-axis:300 mm z-axis:250 mm grinding range:450 x 200 mm distance spindle nose and table:500 mm table load:250 kg dimensions of the machine ca.:2600 x 2100 x 2400 mm switchgear cabinet:1300 x 800 x 2000 mm hydraulical unit::450 x 350 x 500 mm Documents:vorhanden

Pressure:315 t distance between columns:1350 mm stroke:600 mm distance table/ram, max. stroke up, adjustment up:1000 mm table surface area:1200 x 1300 mm table height over floor:1245 mm side window:1250 mm ram surface:1200 x 1300 mm speed down:750 mm/s speed up:680 mm/s working speed:180 mm/s oil volume:2000 l power requirement:150,0 kW weight:35,0 t Dimensions (WxDxH):3,3 x 3,3 x 5,5 m height over floor:5,5 m German Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 cutting impact cushioning:motorisch verstellbar ram interlocking:hydraulisch

pressure:500 t distance between columns:2240 mm stroke:1180 mm distance table/ram, max. stroke up, adjustment up:1800 mm table surface area:2050 x 1800 mm pressure of drawing cushion in table:250 t stroke of drawing cushion in table:380 mm drawing cushion surface in table:1800 x 1200 mm pressure of drawing cushion in ram:122 t stroke of drawing cushion in ram:200 mm drawing cushion area in ram:1800 x 1200 mm ram surface:2215 x 1800 mm table height over floor:500 mm speed down:400 mm/s speed up:10 - 400 mm/s working speed:10 - 100 mm/s depth of the foundation:3,0 m power requirement:122 + 75 + 64,5 kW weight:110,0 t Dimensions (WxDxH):3,6 x 2,2 x 8,5 m height over floor:6,8 m German Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 drawing cushion in table and ram:hydraulic

pressure:40 t throat:360 mm stroke:500 mm distance table/ram, max. stroke up, adjustment up:660 / 1000 mm table surface area:630 x 500 mm hole in the table:200 mm table height over floor:1060 / 720 mm ram surface:450 x 360 mm speed down:60 mm/s speed up:300 mm/s power requirement:7,5 kW weight:2,75 t dimensions (WxDxH):1,0 x 1,8 x 3,05 m additional plate in table:height approx. 340 mm

pressure:25 t throat:355 mm stroke:500 mm distance table/ram, max. stroke up, adjustment up:800 mm table surface area:500 x 500 mm hole in the table:180 mm table height over floor:700 mm ram surface:250 x 250 mm power requirement:7,5 kW weight:2,1 t dimensions (WxDxH):1,45 x 0,9 x 2,55 m

pressure:100 t throat:360 mm stroke:500 mm distance table/ram, max. stroke up, adjustment up:800 mm table surface area:900 x 560 mm table height over floor:710 mm ram surface:630 x 400 mm speed down:200 mm/s speed up:200 mm/s power requirement:17,0 kW weight:5,0 t Dimensions (WxDxH):1,2 x 1,9 x 3,3 m German Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2

Contents 2m3, with 2 removable baffles and removable lid. Lifting eyes and forklift insert Weight approximately 140kg, fully galvanized. Can also be used as an oil/grease separator., New and unused. several pieces in stock, inquire about the current stock!, , = More information =, , Year of manufacture: 2026, Make of bodywork: VTT 2m3 Zandvangbak buffel tank 2m3 inhoud, Technical condition: very good, Visual appearance: very good, Price: On request, Please contact Gert-Jan Kruitbosch (+31648061001, sales@vantongerentrading.nl) or John van Tongeren (+31620537017) for more information, , = Dealer information =, , Interested? We would be happy to make you an excellent offer! Send an email to sales@vantongerentrading.nl or call +31(0)55-3125902., , Do you have a question about an advertisement, drill, pump, part, or order? Or would you just like to discuss what would be useful in your situa ...

System: 68, 78, 80, 92 IV Anzahl der Werkzeugsätze: 4 St. Bohrung: 50 mm Gebrauchte Fensterwerkzeuge Leitz, Zuani IV 68,78,80,92 Verkauf im Kundenauftrag ------------------------------------------ Fensterschnitte als PDF Anhang! Werkzeuge sind durch Anpassungen teilweise älter als auf den angehängten Fensterschnitte/Zeichnungen. Verkauf der Werkzeuge im Zustand, Umfang und mit Zubehör wie vorhanden. Hinweis zu Fensterschnitten, Werkzeugzeichnungen, Werkzeugsystemauflistungen: Fa. Engelfried übernimmt keine Gewährleistung, dass die tatsächlich vorhandenen Werkzeuge mit den genannten und gezeichneten Systemen übereinstimmen. ------------------------------------------ (technische Angaben laut Kunde - ohne Gewähr!) Alle angegebenen Preise netto. zzgl. gesetzl. Mwst. Die Daten fü, dieses Inserat wurden erstellt mit ModulMWS - die Maschinenverwaltung von LogoTech oHG.

Many thanks for your interest on our second hand machines, please find follow our offer: manufacturer: Werner & Pfleiderer Type: Double Z Kneader UK11 with hand tilting imensions pot: 400x400x330mm (lxbxh) Utilizable contents: ca. 40 l Gesamt / 30kg Teig imensions: 1700x1300x1650mm (l/w/h) Weight: ca. 530 kg different: - hand tilting - standard steel construction We offer this machine in 'as is' condition, without warranty, ex warehouse (Incoterms EXW and without packaging. ex Warehouse Hess. Lichtenau, (EXW)unpacked

Many thanks for your interest on our second hand machines, please find follow our offer: manufacturer: Werner & Pfleiderer Type: UK 14 ½ Doppel-Z – Kneter Utilizable contents: approx. 350 l Weight: approx. 2.800 kg different: - machine need New painting, mechanical and electrical contoling before work - product touching parts in stainless steel - double jacked for heating - motorized tilting about the front axle with tilt motor - Working hours approx 2947 (read from counter) We offer this machine in 'as is' condition, without warranty, ex warehouse (Incoterms EXW and without packaging. EXW - ex Warehouse Hess. Lichtenau, unpacked

Great opportunity for butchery, delicatessen, processing workshop, caterer or food production unit: professional meat mixer/kneader with robust construction, equipped with a large metal tank and a powerful mechanical mixing system. This professional machine is designed for mixing and kneading meat-based preparations, particularly for the manufacture of butcher's and delicatessen preparations. Its large tank allows you to work large quantities while ensuring homogeneous mixing thanks to its specially contoured mixing arm. The whole is driven by a professional Leroy-Somer electric motor developing 1.1 kW (1.5 hp). The motor operates in three-phase 220/380 V – 50 Hz and has a nominal speed of 1,420 rpm. The transmission is provided by a robust mechanical assembly with gearbox. The machine has several manual lever controls, allowing its operation to be mechanically managed. Its solid ...

Material: stainless steel Engine: 22 kW Content: 680 ltr. Vat tiltable. Good condition. Are you looking for something else? Write us below! WE PROJECT AND BUILD YOUR ENTIRE PLANT EXACTLY FOR YOUR NEEDS FROM USED AND NEW MACHINES.

Data processing!

Data processing!

Many thanks for your interest on our Frisse double Z kneader, please find follow our offer: Manufacturer : Richard Frisse Herford Type : ZK 25 Kneader Year of manufacturing : 1986 Electrical : 380 VAC complete volume : 250 l usable Volume : 200 l Dimensions : ca. 2030x1000x1300 (l/w/h in mm) Weight : ca. 2000 kg Different : Condition OK trough tiltable We offer this machine in as is – where it is” condition, without warranty ex Warehouse Hess. Lichtenau (EXW), unpacked

New machine 24 months warranty Advantages: + Double-arm kneader as a robust, mobile model with swivel wheels + higher hydration possible compared to spiral kneader + Your doughs will last longer and stay fresh for longer + depending on the type of dough, a TA of up to 200 is possible + excellent for pizza / bread doughs, as well as very sensitive doughs + mixes ingredients very carefully into the dough + less dough heating than with conventional spiral kneading machines + Kettle and double-arm kneading tool made of stainless steel + Kneading arms are dishwasher safe and can be removed quickly and without tools + transparent flour dust hood (soft-close) with automatic switch-off + simple, digital control + 10 kneading levels with timer and 5 speeds adjustable + very smooth running motor, power transmission by belt drive Technical data (according to manufacturer's speci ...

Sottoriva Sprint 30 spiral mixer serial: B31656 2001, 30L spiral mixer, variable speed, stainless bowl and contact parts, safety guard, with timer

Thank you for your interest in our used machines, which we are pleased to offer you as follows: Manufacturer: W&P - Werner & Pfleiderer Model: LUK 075 Double Z Laboratory Mixer - double-walled heatable electr. Values: 380 V 50 Hz Agitator speed: 56/37.5 Total capacity: 1.1 liters Net capacity: 0.75 litres Motor power: 0.37 kW Machine dimensions: approx. 670 x 350 x 330 mm Weight: approx. 65 kg Details: parts made of stainless steel that come into contact with the product double-walled heating Comes from laboratory operations at a research institution We offer this machine for sale "in existing condition" under exclusion of any warranty/defect claims or representations.

Type MZUTL 15 Working capacity ~ 15 liters Total capacity ~ 26 liters Minimum working capacity of 5 liters Tank inner diameter ø 292 mm Steel grade in contact with product 1.4301 Fastener Seal Material FPM, SILICONE, NBR, PTFE, EPDM Homogenizing mixer weight ~ 474 kg Height 1760 mm Height with Raised Lid ~1950mm Length 1770 mm Length with tilted cabinet 2160 mm Width ~ 780 mm Width with tilted cabinet ~ 1050 mm PTFE double-acting scrapers Anchor Agitator Drive Electric Motor 0.55 KW, 1400/88 RPM Gear ratio reducer i=15.84 Rotation of the anchor agitator Continuously 32+160 rpm Comb homogenizer HZB N Homogenizer Drive Electric Motor 7.5KW, 2885rpm Max. sound pressure level 89 dB (characteristic A) Homogenizer rotation Continuously variable 1430+6630 rpm Jacket heating ZBG heating tank (7 kW) Jacket Cooling HE Heat Exchanger Minimum / maximum temperature in the t ...

Type MZUT- EMBF 15 C Working capacity 15 liters Minimum working capacity ~ 5 liters Total capacity ~ 26 liters Tank inner diameter 294 mm Steel grade in contact with product 1.4301 Fastener Seal Material FPM, NBR, PTFE, EPDM Task Mixer Weight ~ 276 kg Height ~ 1630 mm Length ~ 1390 mm Width ~ 720 mm EMBF Emulsifier Emulsifier drive Electric motor 5.5 kW, 2890 rpm Emulsifier rotation Continuously 1500-5500 rpm Emulsifier rotation during CIP Max 4500 rpm Heating jacket heating tank (7 kW) Minimum / maximum temperature in the tank 5 / 95° C Minimum / maximum operating temperature in the tank 20 / 90° C Minimum / maximum jacket temperature 5/ 130° C Minimum / maximum operating temperature in the jacket 25/ 120°C Permissible tank pressure 0 bar Maximum jacket pressure 4 bar Electrical power supply 3x400V+N+PE, protection 50 A Power Consumption -15kW Tank Lighting L ...

Laboratory kneader Volume: 1 litre Product-contacted areas: stainless steel VA Vacuum-resistant Temperable Subject to prior sale - Errors possible

High-performance kneader Volume: 2.5 ltr. Material : product-contacted areas of stainless steel;

Material : Stainless steel Mixed roe with double sheath, heatable / coolable Mixing tool : Z-arms Total volume: 3.75 l. Usable volume: 2.5 ltr. Main drive: 0.81 KW, 1400 / 43 rpm Bucket speeds: rear shovel: 25 rpm front shovel: 43 rpm permissible vapour pressure: 5.88 bar;

Dough kneading machine W&P DK 250 with 2 boilers -Double cone kneader type DK 250 -for max. 400 kg dough or 250 kg flour -with base plate

Diosna D160 2G Lifting Kneading Machine used Boiler and kneading arm tinned Protective grille welded in one place two speeds Boiler was ground by the previous owner in some places does not affect the function, but should be mentioned Machine has been in stock at a dealer for a long time, is therefore dusty and dirty and should therefore be thoroughly cleaned before use Video about test run and other pictures available

Material : areas in contact with the product in stainless steel Volume : 80 ltr. Drive : 10 KW Screw drive : 6,8 KW Operating temperature: 250°C Pressure inside : - 1 bar.

Z-kneader, Year of construction 1970, engines, bearings, gears, gearbox, electrics, overhauled around year 2022. Machine is immediately available and ready for use. Z-Kneader has an electric tilting device.

Thank you for your interest in our used machines, which we can offer you as follows: Model: Double Z kneader with hand tilt Trog dimensions: 350x365x280mm (lxwxh) Net capacity: approx. 35 l total Electrical: 400V 3 ph Dimensions: 1200x800x1650mm (l/w/h) Weight: approx. 350 kg Details: Hand tilting, parts made of stainless steel in contact with the product We offer this machine for sale "as is" to the exclusion of any warranty/claims for defects or representations. ex stock Hess. Lichtenau; Unpacked

--> with discharge screw; Volume : 110 ltr. Drive : 15 KW Drive screw discharge : 7,5 KW Material : Mild steel Weight: 3000 kg Dimensions : L 2.60 m x W 1.60 m x H 1.80 m.

--> Tilting kneader with double jacket Material : wetted areas in stainless steel Volume : 260 ltr. Usable volume: 200 ltr. Dimensions: L 2.60 m x W 1.20 m x H 1.35 m.

--> tilting kneader, with double jacket; Material : wetted areas in stainless steel Volume : 210 ltr. Usable volume: 160 ltr. Dimensions : L 2.40 m x W 1.15 m x H 1.35 m;

Drive : 200 KW Volume : 90 ltr. Usable volume: 63 ltr. Bucket speeds : 45.5 / 41.2 rpm Drive : 200 KW Engine speed : 1500 rpm Weight: ca. 11,5 to Weight gearbox: approx. 2950 kg.

Used lifting kneader DIOSNA, type: S 20 3G -In bakery condition- - for 20 kg dough - 3 gears - Machine runs very smoothly - very nice condition Inspection and test run are of course possible by arrangement.

Batch / spiral kneader W&P, type: UC50 AC -overhauled- - including 2 tank cars - for 50 kg flour or 80 kg dough - for mischweizen and mixed rye dough - in bakery condition - very nice condition, immediately ready for use - Video with kneader in function on request Inspection and test run are of course possible at any time by arrangement. The machine has been tested and is ready for immediate use.

- Lifting kneader Diosna S 35 - with stainless steel boiler - for max. 35 kg dough - with 2 speeds - with foot switch - with flour dust cover - Boiler diameter inside: 52cm - Inside boiler height: 35cm