z kneader used for sale

band speed: 33 m/s grinding band dimension: 75 x 2000 mm total power requirement: 3 kW weight of the machine ca.: 75 kg turning speeds: 2800 U/min Standard equipment: - Knife set for flat steel - Complete knife set for angle steel shears - Complete normal punching equipment - Quick release device for punches up to 31 mm - Support table for punching device, rectangular notching and flat steel shears - Bending stamp with matrices V 40 and V 70 - Electric contact stop (1.000 mm) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

number: 32 bore: 28 mm weight: 51,2 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 100 kN stroke: 0-200 mm table-size: 450 x 1000 mm working speed:: 6-10 mm/ sec. return speed: 20 mm/sec work height max.: 900 mm toolpiece height max.: 200 mm total power requirement: 1,5 kW bending capacity max. - round: 42x3,2 mm : 150x10 mm weight: 320 kg dimensions: 1010x480x1120 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 40 mm : 8,5 U/min : 120 mm roll diameter: 152 / 162 mm engine output: 1,1 kW connected load: 400 V weight: 395 kg Overall size: 900x600x1100 mm Equipment / Accessories: - Two driven rollers - Manual delivery of the upper roller - Working position horizontal and vertical - Bearings with tapered roller bearings - Use of replaceable slide rails on the guide carriage - The standard roller set is included. He can turn different profiles are used The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 25-138 m/min dimensions of saw-band: 1440x13x0,65 mm capacity 90 degrees: round: 150 mm capacity 90 degrees: square: 125 mm capacity 90 degrees: flat: 150x125 mm capacity 45 degrees: round: 75 mm capacity 45 degrees: square: 50 mm capacity 45 degrees: flat: 70x50 mm weight of the machine ca.: 35 kg Control: Standard features: - right and left miter - Single-phase 1800 watt motor - Safety switch - Electronic rotary speed controller 25-138 m / min. with torque control The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sanding belt width: 150 mm sanding belt length: 2000 mm band speed: 16,5/33 m/sec engine output: 2,6/3,37 kW Motor speed: 1400/2800 UpM weight of the machine ca.: 105 kg Domestic equipments: - vibration-free running smoothness - Working height adjustable - S1 motors with 100% duty cycle - Surface and contact grinding is possible - Removable protective cover for surface grinding - Connecting piece for double suction - Built to CE standard The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 32 bore stroke: 125 mm Short spindle: MK 3 throat: 210 mm Machine table - usable table surface: 390x390 mm table load: 65 kg spindle turning speed range: 105-2.650 UpM total power requirement: 0,75 kW Overall size: 750x450x1745 mm weight of the machine ca.: 192 kg Standard equipment: - Number of speed ranges 9x2 steps - Coolant device in the machine base - Movable LED machine light - Swivel work table with integrated machine vice on the opposite side opposite side with jaw width 120 mm - Mains cable and plug therefore immediately ready for use - Drilling table adjustable via gear rack - Depth stop with scale - Emergency stop - According to current CE conformity The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding band dimension: 150 x 2000 mm band speed: 16,5/33 m/sec engine output: 3,4/4,5 kW Motor speed: 1400/2800 UpM weight of the machine ca.: 105 kg Domestic equipments: - vibration-free running smoothness - Working height adjustable - S1 motors with 100% duty cycle - Surface and contact grinding possible - Removable protective cover for surface grinding - Connecting piece for double suction - Built to CE standard The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 400 kN stroke length max.: 285 mm working feed: 9 mm/sec return speed: 20 mm/sec : 660x1250 mm work height max.: 930 mm toolpiece height max.: 250 mm total power requirement: 4 kW : 200x26 mm bending capacity max. - round: 60x5,0 mm Domestic equipments: - semi-automatic NC control (99 programs with 16 steps each) - incl. bending bolt (without punch) - Incl. tool holder for dies - incl. foot pedal The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 50 mm : 8,5 U/min : 100 kN roll diameter: 162 mm Drive: 1,5 kW range L-W-H: 1100x850x1350 mm weight: 495 kg Equipment / Accessories: - Two driven rollers - Hydraulic delivery of the upper roller - Digital display with memory function - Working position horizontal and vertical - Bearings with tapered roller bearings - Use of replaceable slide rails on the guide carriage - Footswitch - standard roller set The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

width of the strips: 150 mm band length: 2000 mm band speed: 16,5/33 m/sec total power requirement: 2,6/3,37 kW turning speeds: 1400/2800 U/min weight of the machine ca.: 95 kg Equipment / Accessories: - Removable dust catcher - Fine adjustment of the band adjustment - Sanding belt - Eye protection - Motor protection switch - Operation manual - Sanding table - working height adjustment - surface grinding pad The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

capacity 90 degrees: round: 220 mm capacity 90 degrees: square: 210x210 mm capacity 90 degrees: flat: 230x185 mm Cutting area at 45 degrees left: round: 150 mm Cutting range at 45 degrees: square: 150x150 mm Cutting range at 45 degrees : flat: 150x210 mm Cutting area at 60 degrees left: round: 90 mm Cutting range at 60 degrees left: square: 90x90 mm Cutting area at 60 degrees left: flat: 90x100 mm dimensions of saw-band: 2450x27x0,9 mm cutting speed: 35/70 m/min work height max.: 915 mm Vice opening: 265 mm total power requirement: 1,2 kW weight of the machine ca.: 240 kg dimensions of the machine ca.: 1550x870x1740 mm Zimmer Z241 / R is a self-lowering saw for miter cuts from 0 ° - 60 ° left. After cutting, the machine stops by a safety limit switch. The lowering is infinitely adjustable via a hydraulic system. Lifting the saw arm after cutting can be done in any position. The saw arm ...

: 40 mm : 8,5 U/min : 120 mm roll diameter: 152 / 162 mm engine output: 1,1 kW range L-W-H: 900 x 600 x 1000 mm weight: 470 kg connected load: 400/50 V/Hz Equipment / Accessories: - Three driven rollers - Manual delivery of the upper roller - Working position horizontal and vertical - Bearings with tapered roller bearings - Use of replaceable slide rails on the guide carriage - The standard roller set is included. He can turn used different profiles The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sanding belt measurements: 150x2000 mm : 1400/2800 U/min band speed: 16,5/33 m/s total power requirement: 3,4/4,5 kW weight: 190 kg Maximum grinding of pipes is possible: at 90 degrees max. 150 mm Ø at 60 degrees max. 127 mm Ø at 45 degrees max. 100 mm Ø at 30 degrees max. 70 mm Ø The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 25-138 m/min dimensions of saw-band: 1440x13x0,65 mm capacity 90 degrees: round: 150 mm capacity 90 degrees: square: 125 mm capacity 90 degrees: flat: 150x125 mm capacity 45 degrees: round: 75 mm capacity 45 degrees: square: 50 mm capacity 45 degrees: flat: 70x50 mm weight of the machine ca.: 35 kg Standard features: - Single-phase 1800 watt motor - Safety switch - Electronic rotary speed controller 25-138 m / min. with torque control The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 80 mm roll diameter: 260 mm : 7 U/min : 170 mm : 27 kN : 160 mm : 450 mm total power requirement: 3,7 kW dimensions: 980x1430x1600 mm weight: 1380 kg Accessories / equipment: - Three driven rollers with a smooth surface - Hydraulic delivery of the upper roller - Working position horizontal and vertical - Digital display with memory function - Bearings with tapered roller bearings - Use of replaceable slide rails on the guide carriage - The standard roller set is included. He can bend different profiles are used e.g. Flat iron, T-iron, solid material etc. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 40 mm : 8,5 U/min : 120 mm roll diameter: 152 / 162 mm engine output: 1,1 kW connected load: 400/50 V/Hz hydraulic pump: 1,1 kW : 80 kN range L-W-H: 900 x 600 x 1000 mm weight: 470 kg Equipment / Accessories: - Three driven rollers - Hydraulic delivery of the upper roller - Digital display with memory function - Working position horizontal and vertical - Bearings with tapered roller bearings - Use of replaceable slide rails on the guide carriage - The standard roller set is included. He can turn used different profiles The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 40 mm : 8,5 U/min : 120 mm roll diameter: 152 / 162 mm engine output: 1,1 kW connected load: 400/50 V/Hz hydraulic pump: 1,1 kW : 80 kN range L-W-H: 900 x 600 x 1000 mm weight: 470 kg Equipment / Accessories: - Three driven rollers - Hydraulic delivery of the upper roller - Digital display with memory function - Working position horizontal and vertical - Bearings with tapered roller bearings - Use of replaceable slide rails on the guide carriage - The standard roller set is included. He can turn used different profiles The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 400 x 32 mm capacity 90 degrees: round: 145 mm capacity 90 degrees: square: 130 x130 mm capacity 90 degrees: flat: 300 x 80 mm capacity 45 degrees: round: 105 mm capacity 45 degrees: square: 115 x 115 mm capacity 45 degrees: flat: 250 x 60 mm total power requirement: 1,8 kW weight of the machine ca.: 240 kg dimensions of the machine ca.: 800 x 1100 x 1400 mm Domestic equipments: - stepless, electronic speed control - Optional hydraulically controlled or manual belt arm lowering - Saw arm can be swiveled up to 60 ° right - quick release vice - Band guide with 8 ball bearings - Hydraulic saw blade clamping with clamping pressure display and strip break-off - Including coolant device - incl. machine cabinet The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

dimensions of saw-band: 2085x20x0,9 mm capacity 90 degrees: round: 185 mm capacity 90 degrees: square: 150x150 mm capacity 90 degrees: flat: 220x150 mm : 110 mm : 100x100 mm : 110x90 mm capacity 60 degrees: round: 70 mm capacity 60 degrees: square: 70x70 mm capacity 60 degrees: flat: 70x70 mm voltage: 400 V sawband speed: 35 + 70 m/min. : 230 mm total power requirement: 0,75 kW weight of the machine ca.: 195 kg dimensions of the machine ca.: 1280x550x1480 mm Domestic equipments: - stepless, electronic speed control - Optional hydraulically controlled or manual belt arm lowering - Saw arm can be swiveled up to 60 ° right - quick release vice - Band guide with 8 ball bearings - Hydraulic saw blade clamping with clamping pressure display and strip break-off - Including coolant device - incl. machine cabinet The data for this ad was created with ModulMWS - the software solution of LogoTec ...

capacity 90 degrees: round: 150 mm capacity 90 degrees: square: 140x140 mm capacity 90 degrees: flat: 150x140 mm : 100 mm : 90x90 mm : 100x90 mm capacity 60 degrees: round: 70 mm capacity 60 degrees: square: 65x65 mm capacity 60 degrees: flat: 65x70 mm dimensions of saw-band: 1735x13x0,65 mm cutting speed: 30-80 m/min engine output: 1,5 kW : 150 mm weight of the machine ca.: 37 kg dimensions of the machine ca.: 900x460x500 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 50 mm : 8,5 U/min : 100 kN roll diameter: 162 mm Drive: 1,5 kW range L-W-H: 1100x800x1500 mm weight: 450 kg Equipment / Accessories: - Two driven rollers - Hydraulic delivery of the upper roller - Digital display with memory function - Working position horizontal and vertical - Bearings with tapered roller bearings - Use of replaceable slide rails on the guide carriage - Footswitch - standard roller set The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sanding belt measurements: 150x2000 mm : 1400/2800 U/min band speed: 16,5/33 m/s total power requirement: 2,6/3,37 kW weight: 190 kg Standard features: - vibration-free running smoothness - Working height adjustable - S1 motors with 100% duty cycle - Surface and contact grinding is possible - Removable protective cover for surface grinding - Connecting piece for double suction - Built to CE standard The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

dimensions of saw-band: 5.330 x 41 x 1,3 mm capacity 90 degrees: round: 460 mm capacity 90 degrees: square: 460 mm capacity 90 degrees: flat: 440 x 600 mm Cutting area at 45 degrees left: round: 445 mm : 410 mm Cutting area at 60 degrees left: round: 295 mm Cutting range at 60 degrees left: square: 295 mm table height: 890 mm cutting speed: 25 - 80 m/min total power requirement: 3,75 kW machine weight ab.: 1.500 kg dimensions: 2810 x 1135 x 1860 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 100 mm roll diameter: 315 mm bending speed: 5 m/min bending capacity - flat iron: max. 12 x 20 mm : 75 mm Drive: 11 kW weight: 2.600 kg range L-W-H: 1950x1600x2100 mm Equipment / Accessories: - Two driven rollers - Hydraulic delivery of the upper roller - Digital display with memory function - Working position horizontal and vertical - Bearings with tapered roller bearings - Use of replaceable slide rails on the guide carriage - Footswitch - standard roller set The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

capacity 90 degrees: round: 240 mm capacity 90 degrees: square: 240 x 240 mm capacity 90 degrees: flat: 165 x 210 mm : 195 mm : 185 x 185 mm : 130 x 190 mm capacity 60 degrees: round: 120 mm capacity 60 degrees: square: 85 x 85 mm capacity 60 degrees: flat: 85 x 120 mm Motor output: 1,2 kW : 170 mm : 145 x 145 mm : 60 x 195 mm cutting speed: 36 + 72 m/min dimensions of saw-band: 2725 x 27 x 0,9 mm : 315 mm work height max.: 900 mm Weight: 330 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding band dimension: 150 x 2000 mm band speed: 33 m/sec weight of the machine ca.: 105 kg engine output: 4 kW turning speeds: 2800 U/min Accessories / equipment: - Vibration-free running smoothness - Adjustable working height - S1 motors with 100% duty cycle - Surface and contact grinding possible - Removable protective cover for surface grinding - Connection piece for double suction - Built according to the CE standard The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

roll diameter: 350 mm : 110 mm bending speed: 1-5 m/min Bending capacity: 157 Wcm³ total power requirement: 7,5 kW weight of the machine ca.: 2950 kg Domestic equipments: - Direct drive of all three shafts - Single delivery of the side rollers - Horizontally and vertically usable - Hydraulically movable side rectifier (via control panel) - 2 digital displays for the feed rollers - Hardened rollers - Mobile control panel The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 40 mm : 8,5 U/min : 120 mm roll diameter: 152 / 162 mm engine output: 1,1 kW connected load: 400/50 V/Hz hydraulic pump: 1,1 kW : 80 kN range L-W-H: 900 x 600 x 1000 mm weight: 470 kg Equipment / Accessories: - Two driven rollers - Hydraulic delivery of the upper roller - Digital display with memory function - Working position horizontal and vertical - Bearings with tapered roller bearings - Use of replaceable slide rails on the guide carriage - The standard roller set is included. He can turn used different profiles The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 200 kN stroke length max.: 200 mm working feed: 10 mm/sec return speed: 20 mm/sec : 480x1060 mm work height max.: 900 mm toolpiece height max.: 200 mm total power requirement: 2,2 kW : 200x12 mm bending capacity max. - round: 48x4,0 mm weight: 500 kg Overall size: 1010x480x1120 mm Domestic equipments: - with semi-automatic control (99 programs with 16 steps each) - including bending bolt (without punch) - Tool holder for dies - Foot pedal Equipment: - Stamp, small U = 145 mm 85 °, H = 200 mm, R = 5 mm - Quick change monometer 85 °, H = 200 mm, V = 63 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 50 mm : 8,5 U/min : 100 kN roll diameter: 162 mm Drive: 1,5 kW weight: 495 kg range L-W-H: 1100x850x1100 mm Equipment / Accessories: - Three driven rollers - Hydraulic delivery of the upper roller - Digital display with memory function - Working position horizontal and vertical - Bearings with tapered roller bearings - Use of replaceable slide rails on the guide carriage The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 300 kN stroke length max.: 235 mm : 200x24 mm bending capacity max. - round: 60x4,0 mm toolpiece height max.: 250 mm : 660x1250 mm work height max.: 900 mm return speed: 20 mm/sec working feed: 10 mm/sec total power requirement: 3 kW weight: 950 kg Domestic equipments: - semi-automatic NC control (99 programs with 16 steps each) - incl. bending bolt (without punch) - Incl. tool holder for dies - incl. foot pedal Equipment: - Stamp, smallest U = 145 mm 85 °    H = 250 mm, R = 5 mm - Quick change Monomatrize 85 °    H = 250 mm, V = 63 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

roll diameter: 215 mm shaft diameter: 60 mm Shaft revolutions: 6 U/min : 100x2 mm : 80x15 mm pressure hydraulic cylinder: 180 kN total power requirement: 2,2 kW weight: 720 kg dimensions: 1200x900x1700 mm Accessories / Equipment: - Three driven rollers - Hydraulic delivery of the upper roller - Working position horizontal and vertical - Digital display with memory function - Bearings with tapered roller bearings - Use of replaceable slide rails on the guide carriage - The standard roller set is included. It can bend various profiles flat iron, T-iron, solid material etc. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

shaft diameter: 60 mm Shaft revolutions: 6 U/min roll diameter: 215 mm pressure hydraulic cylinder: 180 kN dimensions: 1125x870x1620 mm weight: 820 kg Accessories / Equipment: - Three driven rollers - Hydraulic delivery of the upper roller - Working position horizontal and vertical - Digital display with memory function - Bearings with tapered roller bearings - Use of replaceable slide rails on the guide carriage - The standard roller set is included. It can bend various profiles flat iron, T-iron, solid material etc. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sanding belt width: 150 mm sanding belt length: 2000 mm band speed: 33 m/sec engine output: 3 kW Motor speed: 2800 UpM weight of the machine ca.: 105 kg Domestic equipments: - vibration-free running smoothness - Working height adjustable - S1 motors with 100% duty cycle - Surface and contact grinding is possible - Removable protective cover for surface grinding - Connecting piece for double suction - Built to CE standard The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore: 16 mm weight: 86 kg 4-163400 Consisting of: - 10x Professional screw clamp, burnished/nitrided - 4x Professional screw clamp 45°/90°, burnished - 8x Vario Prisma Ø 50 90°/120° with screwed-in collar, nitrided - 30x quick-release bolts without groove, double burnished - 8x universal stop 80 L, nitrided - 10x universal stop 115 L, nitrided - 10x stop and clamping angle 90 X, nitrided - 10x stop and clamping angle 90 L, nitrided - 4x stop and clamping angle 300 G, nitrided - 1x set of stop and clamping angles 250 G with rotating angle, nitrided - 1x set of stop and clamping angles 500 GK, nitrided - 1x tool trolley, powder-coated - 1x accessory set The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

number: 124 bore: 28 mm weight: 326 kg 4-283500 consisting of: - 14x Professional screw clamp - nitrided - - 10x Professional screw clamp 45°/90° - nitrided - 8x Prism Ø 50 135° with screwed-in collar - nitrided - 36x Quick-clamping bolts without groove, double - burnished - 8x magnetic clamping bolts 68 - aluminum - 12x universal stop 150 L - nitrided - 12x universal stop 225 L - nitrided - 4x universal stop 500 S - nitrided - 12x stop and clamping bracket 175 L - nitrided - 2x stop and clamping bracket 300 G - nitrided - 2x stop and clamping bracket 500 G - nitrided - 1x stop and clamping bracket 500 G with rotation angle left - nitrided & stop and clamping bracket and clamping bracket 500 G with rotation angle right - nitrided - 1x stop and clamping bracket 750 G left - nitrided & stop and clamping bracket Clamping bracket 750 G right - nitrided - 1x stop and clamping bracket 800  ...

number: 1 weight: 2,57 kg width: 265 mm height: 250 mm clamping force max.: 3 kN The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

engine: 2,8 KW weight of the machine ca.: 320 kg dimensions of the machine ca.: 86 x 90 x 85 cm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 10000 mm y-travel: 1500 mm z-travel: 2700 mm total power requirement: kW weight of the machine ca.: t required space: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

longitudinal travel: 400 mm cross travel: 160 mm table length: - mm table width: - mm total power requirement: - kW weight of the machine ca.: - t dimensions of the machine ca.: - m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

longitudinal travel: 400 mm cross travel: 160 mm table length: - mm table width: - mm total power requirement: - kW weight of the machine ca.: - t dimensions of the machine ca.: - m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

brinell hardness: - rockwell hardness: - throat: - mm weight of the machine ca.: - t dimensions of the machine ca.: - m sclerometer Drive: 0 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 1016 mm y-travel: 610 mm z-travel: 760 mm total power requirement: ? kW weight of the machine ca.: 7,5 t dimensions of the machine ca.: 3 x 2,5 x 3,2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning length: 750 mm turning diameter: 310 mm turning diameter over slide rest: 175 mm spindle bore: 32.0 mm tailstock quill taper MT: 3 MK turning speeds: 85 - 2200 U/min bed width: 200 mm spindle taper: DIN 55027 GR 5 total power requirement: 2.2 kW weight of the machine ca.: 710 kg range L-W-H: 1884 x 717 x 1262 mm New price ~ 20.000 euros from a technical college () - in checked condition - machine videos - https://www.youtube.com/watch?v=iqU7Bkh6INo https://www.youtube.com/watch?v=aSViqjk51Ik Furnishing: - Robust conventional center lathe - 3-jaw lathe chuck Ø 160 mm, with replacement jaws - NEWALL digital display, front left - MULTIFIX steel holder with 4x inserts - fixed bezel - moving bezel - Movable tailstock - Foot/spindle brake - Machine swing feet - User manual (PDF/NL) all technical data: - Turning diameter over bed 310 mm - Distance between centers 750 mm - Turning di ...

turning diameter: 325 mm turning length: 1000 mm swing diameter over bed slide: 250 mm Swingdiameter in the bed bridge: 440 mm reus: 12 (85-2000) U/min tail stock: MK 3 quill stroke: 100 mm diameter of quill: 40 mm spindle taper: DIN 55027 Nr. 5 spindle bore: 32 mm feed: längs 0,006 - 1,77 m/min feed: quer 0,003 - 0,885 m/min total power requirement: 2,2 kW weight of the machine ca.: 770 kg dimensions of the machine ca.: 2150 x 950 x 1350 mm Furnishing: - Cooling device - Machine light - chip rear wall - Spindle protection - Lathe chuck protection - Tool holder protection - Foot pedal with braking function CE - Interchangeable gears incl. Optional equipment - 3-jaw chuck Ø 160 mm type 3204/ DIN6350, BISON - MULTIFIX quick-change holder type A, incl. 4 tool holders - 2-axis digital display DRO Newall The data for this ad was created with ModulMWS - the software solution of LogoTech oH ...

: neu : ca. 4 Monate ab Auftragse : Bulgarien : 37910 € : 724.08 € : 400 mm : 1000 mm : 200 mm : 52 mm : 235 mm : 320 mm : 6 : 6 MK : 12 : 50-2.240 1/min : 80 : 0.015 - 0.6 mm/U : 0.0075 - 0.3 mm/U : 40 : 0.25 - 7.5 mm : 120 - 4 Gänge/ : 0.0625 - 1.875 : 480 - 16 : 235 mm : 110 mm : 50 mm : 4 MK : 100 mm : 4 kW : 2750 mm : 1100 mm : 1600 mm : 1540 kg driven by manual transmission 3-axes digital readout Fagor 40i quick change toolpostMultisuissewith4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 200 mm spindle noseNr. 6 DIN 55027 four way rapid traverse device spindle dead center coolant equipment 1 pce. flange plate for lathe chuckØ 200 mm 1 adapter sleeve full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock low voltage machine lamp operating manual machine accord ...

: neu : ca. 4 Monate ab Auftragse : Bulgarien : 113720 € : 2149.31 € : 800 mm : 2000 mm : 400 mm : 315 mm : 560 mm : 560 mm : 318 MK : 12 : 8 - 400 1/min : 152 : 0.039 - 15 mm/U : 0.02 - 7.5 mm/U : 76 : 0.5 - 150 mm : 60 - 1/5 Gänge/ : 0.125 - 37.5 : 240 - 4/5 : 410 mm : 150 mm : 105 mm : 6 MK : 225 mm : 11 kW : 6100 kg Their main purpose is to process pipes. Accordingly, this type of machines is widely used in the oil industry. Oil country lathes have large capabilities of processing inner and outer cylindrical and conical threads on pipes with large diameters. The clamping of the pipes with two universals and stands allows the processing of long pipes. These lathes are suitable for producing elements and equipment for the oil industry, as well as for maintaining such facilities. Drive via gearbox Electrodynamic brake 3-axis digital display Fagor Quick-change tool holder Amestra ty ...

max. workpiece diameter: 500 mm threading length: 1250 mm max. module: 10 min. module: 1 workpiece dia. over saddle: 250 mm spindle bore of workspindle: 102 mm quill stroke: 100 mm workpiece turning speeds: 0,0032 - 2,6 U/min feeds - rolls: 0,027 - 5,66 mm/WU feeds - longitudinal: 0,3 - 198 mm/min main drive: 4 kW swivel angle for work spindle: 90/120 ° diameter of hob: 150 mm milling width: 100 mm hob turning speeds: 45 - 560/900 U/min total power requirement: 9,5 kW weight of the machine ca.: 4,2 t Machine equiped with: - Heavy Duty Hob Head ApFw - change gears - Milling Head ApFF - Single Indexing Device ETE - Bush Rest - Coolant Tank The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 4 Monate ab Auftragse : Bulgarien : 113620 € : 2147.42 € : 800 mm : 2000 mm : 400 mm : 260 mm : 560 mm : 560 mm : 318 MK : 12 : 8 - 400 1/min : 152 : 0.039 - 15 mm/U : 0.02 - 7.5 mm/U : 76 : 0.5 - 150 mm : 60 - 1/5 Gänge/ : 0.125 - 37.5 : 240 - 4/5 : 410 mm : 150 mm : 105 mm : 6 MK : 225 mm : 11 kW : 6000 kg Their main purpose is to process pipes. Accordingly, this type of machines is widely used in the oil industry. Oil country lathes have large capabilities of processing inner and outer cylindrical and conical threads on pipes with large diameters. The clamping of the pipes with two universals and stands allows the processing of long pipes. These lathes are suitable for producing elements and equipment for the oil industry, as well as for maintaining such facilities. Drive via gearbox Electrodynamic brake 3-axis digital display Fagor Quick-change tool holder Amestra ty ...