z kneader used for sale

Key data: 2200 mm, 600 mm, 600 mm

Travelling column milling machine Manufacturer Ibarmia Type ZV40 Year of construction 2000 Control Heidenhain TNC 410 Table size 2600 x 650 permissible. Load 2300kg Travel X/YZ 2200/600/600 Tool holder SK40 24 Way Tool Changer max speed 8,000rpm Partition wall for pendulum operation Electronic Handwheel HR410 Chip conveyor Glass scales in all axes Guide of the Y-axis would have to be redone In 2018, the machine got a new guide in Z and X axis, and a new main spindle. Machine is fully functional except for the linear guide of the Y-axis. Machine has the following dimensions: L x W x H 4200 x 3000 x 3050, weight 12000kg. Without the vices in the photos.

Key data: 5005 mm, 3586 mm, 1106 mm

year of production: 2007 automatic tool change Work spaces [mm]: 5000x2500 Groove distance [mm]: 200 Travel ranges [mm]: 5005x3586x1106 Work feed [m/min]: 35m/min Rapid feed [m/min]: 40 Spindle speed [rpm]: 35 - 6000 Spindle torque [kW]: 37kW Max. torque [Nm/rpm]: 670/525 Tool clamping: HSK-A 100 Tool magazine [pcs.]: 100ks Machine control system: iTNC 530 2x univerzální úhlová hlava 45° Direct outlet head Power supply

Tip height: 150 mm Center width: 760 mm Swivel Ø over bed/support slide: 300/165 mm Spindle bore: 32 mm Spindle holder, short taper according to DIN 55027: Gr. 5 Tailstock quill taper: MK 3 12 spindle speeds: 85 - 2000 rpm 48 feeds: 0.006 - 1.77 mm 48 metric thread pitches: 0.1 - 28 mm 58 Inch Thread: 75 - 2.5 Gg/" 19 module threads: 0.1 - 1.75 module 19 Diametrical Pitch Thread: 70 - 4 DP electr. Drive: 220/380 V, 1400 rpm, 2.2 kW Weight: 800 kg Space requirement: 1800 x 770 x 1300 mm

Condition Used Brand Siemens Type ZR88-LA132SP4EW Voltage Volt 3 fase 400 volt Force KW 5,5 KW - 137 Nm Rotational speed RPM 384 RPM Shaft size mm 60 mm Flens pasrand 250 mm Version Eigen gewicht 170 kilo Length 110.00cm Width 35.00cm Height 35.00cm Related Products All employees speak Dutch, German, and English. Prices are exclusive of VAT. Shipping is possible (for an additional charge). (Changes and errors in technical data, information, and prices as well as prior sale are reserved.)

Screw compressor Atlas Copco ZR90VSDFF Inverter and dryer integrated. 90 kW 8.75 bar 14.70 m3/min

Geho ZD 900 in a sound-dampened enclosure with a Hatz 1D90E-Z diesel engine. The ZD900 piston pump is designed for vertical and horizontal dewatering. These positive displacement pumps are self-priming and ideally suited for pumping a mixture of water and air without any restrictions. Furthermore, these pumps can run dry without causing damage or wear to components. Optionally available with any desired coupling/connection. MAX 95 m³/h MAX: 20 MWK. In stock; please feel free to call or email us, we are happy to assist you. Additional information: FEATURES - Very quiet noise level - 47 dB(A) at 10 meters - 1D90E diesel engine - Easy access to engine and pump - Stackable thanks to sturdy integrated stacking corners - with forklift pockets for easy transport BENEFITS - Small and light, big in capacity, efficiency, and lifespan - Very quiet, 47 dB(A) at 10m. - All panels/doors are made of g ...

: 40 mm : 8,5 U/min : 120 mm roll diameter: 152 / 162 mm engine output: 1,1 kW connected load: 400 V weight: 395 kg Overall size: 900x600x1100 mm Equipment / Accessories: - Two driven rollers - Manual delivery of the upper roller - Working position horizontal and vertical - Bearings with tapered roller bearings - Use of replaceable slide rails on the guide carriage - The standard roller set is included. He can turn different profiles are used The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Gear shaving machine ZSA 320

Offer 26072 Technical data : - Rope balancer with load capacity of approx. 60 kg - Articulated arm with projection approx. 3.6 m - Swivel range approx. 375 ° - Hackenweg approx. 2.0 m - Total height approx. 3.2 mm - Pneumatic connection 6 bar - Net weight approx. 300 kg

Offer 26075 Technical data : - Rope balancer with load capacity of approx. 60 kg - Articulated arm with projection approx. 3.6 m - Swivel range approx. 375 ° - Hackenweg approx. 2.0 m - Total height approx. 3.2 mm - Pneumatic connection 6 bar - Net weight approx. 300 kg

Condition Used Brand VEM Type ZG3 MR A112 M4 Voltage Volt 3 fase 380 volt 400 volt Force KW 5,5 KW Rotational speed RPM 315 RPM Shaft size mm 48 mm Flens pasrand 180 mm Length 70.00cm Width 24.00cm Height 32.00cm All employees speak Dutch, German, and English. Prices are exclusive of VAT. Shipping is possible (for an additional charge). (Changes and errors in technical data, information, and prices as well as prior sale are reserved.)

Spreader / Sprayer Manufacturer : Zettelmeier 3 Motor with air pressure Dimensions: W: 80cm D: 150cm H: 175cm Details see picture

Kalmeijer KGM Feed Roller Feed roller, standard and gearProduct descriptionManufacturer: KalmeijerType: Feed rollerCondition: usedStandard and gear

Kalmeijer Feed Roller, standard and gearKalmeijer Feed Roller, standard and gear NEWReaster: KalmeijerType: Feed Roller with GearCondition: NewKalmeijer Pastry Machine KGMBhe KGM is a well-known type of machine in the food industry, especially in bakery and confectionery production.Kalmeijer Feed Roller (KGM):D ies is one of the conveyor rollers in the pastry machine. It transports the dough through the various sheeting stations. There are typically several rollers in such a machine.Gear (KGM):D These gears are part of the drive train of the

Kalmeijer Feed Roller GearKalmeijer Feed Roller Gear NEWHer: KalmeijerType: Gear for Feed RollerCondition: New Gear (KGM):D These gears are part of the machine's drive train. They precisely transmit the power from the motor to the various rollers to ensure synchronized and uniform transport of the dough. Kalmeijer Pastry Machine KGMBhe KGM is a well-known type of machine in the food industry, especially in bakery and confectionery production.Kalmeijer Feed Roller (KGM):D ies is one of the conveyor rollers in the

Used Kalmeijer pastry forming roller KGM “Butter biscuit“ 1291-910 Product description Manufacturer: Kalmeijer Type: “Butter biscuit“ No.: 1291-910/B Condition: used Pastry figure: Dimensions: 65 x 45 mm Thickness: 3 mm Weight: 12 gr Roller width: 250 mm Details see pictures.

Gear Figurine Roller for Kalmeijer Pastry Forming Machine KGM New â Product Description âœ" Manufacturer: Kalmeijer âœ" Condition: New âœ" Material: Plastic âœ" Diameter: 10.5 cm âœ"  ̃ Hole: 2 cm âœ" Width: 2 cm Details see picture

Geho ZD 900 in sound-damped housing with Hatz 1D81Z diesel engine. The ZD900 piston pump is designed for vertical and horizontal dewatering. These positive displacement pumps are self-priming and extremely suitable for pumping a mix of water and air without any restrictions. In addition, these pumps can run dry without any worries, without causing damage or wear to parts. Can be delivered in any desired coupling/connection MAX 95m/h MAX: 20 MWK Several pieces in stock Please call or email us, we are happy to help you. Additional information: FEATURES - Very quiet noise level - 47 dB(A) at 10 meters - Diesel engine 1D81Z - Easy access to motor and pump - Stackable thanks to sturdy integrated stacking corners - With forklift tubes for easy transport BENEFITS - Small and light, large in capacity, efficiency and lifespan - Very quiet, 47 dB(A) at 10m. - All panels/doors are made of galvanize ...

pressure: 63 t stroke rate in continuous stroke: 90 min force: 2200 Nm Torque: 12500 Nm no. of strokes: 56 / 90 Hub/min Labour performance: 5,5 kW sheet thickness - max.: 6,3 / 3,2 mm cutting surface: 1600 mm² distance between columns: 320 mm throat: 315 mm min. ram stroke: 8 mm max. ram stroke: 120 mm ram adjustment: 70 mm ram surface: 400 x 500 mm tool hole in ram: 40 mm tool shank hole (depth x diameter): 92 mm T-slots: 2 Stk total power requirement: 6 kW weight of the machine ca.: 5,5 t Rated force: 630 kN (63 tons) Maximum sheet thickness: 3.2 mm Ram stroke: 8–120 mm Stroke rate: 56 / 90 strokes per minute Shut height (table to ram): 560 mm Ram adjustment: 70 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Size: 0x0 Equipments: Mechanical speed: 250 pieces/hour

pressure: 160 t stroke: 500 mm total power requirement: 20,5 kW weight of the machine ca.: 7,5 t Rated force: 160 Mp (˜ 1600 kN / 160 tons) Operating pressure: 144 kp/cm² Speed: Downward: 200 mm/s Upward: 250 mm/s Ram stroke: 500 mm Throat depth: 360 mm Max. distance (table to ram): 800 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Size: 0x0 Equipments: Mechanical speed: 250 pieces/hour

1.) Sumbel Herold 2.)Zechini Ottima 74 Roller press Year 2000 Size 74cm Roller pressing unit to press together paper, cardboard, material, leather, plastic, corrugated carton, etc. Max material thickness: 3,5 mm. Dimensions: 96 x 85x 105h cm Net weight: 119 kg 3.) Schmedt Präkant 6201 Turning-in machine Schmedt Präkant 0601, good condition, cleaned and checked, max.size 600x600mm, min,150x150mm, max. board thikness 6mm, min.1,5mm.

Size: 0x0 Equipments: Maximum mechanical speed: 250 pieces/hour

Size: 0x0 Equipments: Speed: Machine output: 360 cycles/hour

Size: 355 x 760 mm Equipments: Technical data: Minimum envelope size: 100 x 216 mm Maximum envelope size: 355 x 760 mm

Size: 0x0 Equipments: Mechanical speed: 300 cycles/hour

: neu : Bulgarien : 53750 € : 1015.88 € : 630 mm : 2000 mm : 315 mm : 103 mm : 430 mm : 400 mm : 11 : 120 MK : 21 : 12,5 - 1250 1/min : 120 : 0.04 - 12 mm/U : 0.02 - 6 mm/U : 0.5 - 120 mm : 60 - 1/4 Gänge/ : 0.125 - 30 : 240 - 1 : 315 mm : 90 mm : 90 mm : 5 MK : 230 mm : 11 kW : 3310 kg driven by manual transmission 3-axes digital readout quick change toolpostAmestra with 4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 315 mm spindle dead center longitudinal stop for 1 position coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock low voltage machine lamp operating manual machine according to ",CE", FURTHER TURNING LENGTHS: turning length1.000 mm € 50 880,00 turning length1.500 mm € 51 960,00 turning length3.000 mm € 58 400,00 tur ...

Item No. ZENIT400-30-ST - Filter rack complete with wine thread and end plates - without filter plates - Filter requires an odd number of filter plates - 1 year functional warranty

ZENO shredder type ZTLL 3000 x 2500 For crushing PVC window frames Capacity approx. 10 t/h with screen perforation 50 mm Ø Inlet cross-section: 3000 x 2500 mm Drive: 2 x 132 kW, gearbox with torque cut-off Rotor flight circle: 750 mm Rotor speed: approx. 80 rpm Rotor design: 4 rows (180 pcs.) positive inserts, 80 x 80 x 45 mm on tool holders Rotor Bearing: Pillow Block Bearing Rotor body: hardfaced (wear protection) Water spraying funnel: flat jet nozzles, à 3 l/min at 3 bar Screen design: solid screen basket, reinforced with ribs, with screen quick-change device Counter blade: with cutting gap adjustment and foldable Side walls in the rotor area: replaceable, Hardox material Hopper: 1300 mm high, flared on 4 sides, double-walled with concrete filling, without lid Machine weight: approx. 43,000 kg Control cabinet (loose, for controlling the machine, incl. soft sta ...

Technical data: Manufacturer: Zeiss Type: O-Select Year of Make: 2015 Measuring range X/Y/Z: X 114 mm, Y 91.5 mm, Z 65 mm Condition Condition: Used Functional: Tested and fully functional Other equipment and accessories included: Megapixel camera with CAA corrected optics Integrated control for autofocusing Integrated transparency table Workstation Z230 SFF Power C1/HP with 23" touch monitor with software Zeiss O-Select data system

wire diameter 0,1-0,5 mm spring diameter 1-5 mm feeding length 1000 mm output - pieces/min 70

with washer assembly diameter range 10 mm shaft length under head 100 mm max. thread length 65 mm output pieces/min 180

vibratory feeder diameter range 10 mm shaft length under head 100 mm max. thread length 65 mm output pieces/min 180

vibratory feeder diameter range 6-12 mm shaft length under head 170 mm max. thread length 102 mm output pieces/min 125

Used paddle mixer in acid-resistant design with a capacity of 1700 liters. Italian-made mixer manufactured by Zanelli. Internal dimensions of the device: diameter 1.2m, length 1.5m.

Ex-protected rotary valve, ZRD 200 1-5-GC, Coperion, new -40% Special price If you have a VAT number, we will be happy to issue you with an invoice without VAT. New! - never been used and is completely new, - comes from a spare parts warehouse of a certified production facility, Technical specifications: - Explosion-proof rotary valve for granules, model ZRD 200 1-5-GC, Coperion, new -40%, - Explosion-proof design, Up to max. 60°C, - Powder and granules, aluminium dust containing steel and stainless steel, - designed for a bulk density of 350 kg/m³, max. 450 kg/m³ - Without drive and bearing air purge (quote available), - Housing material: grey cast iron, rotary valve: steel, - Inlet and outlet: DN200, - Please feel free to ask us for the specifications, - Viewings are available at any time, 6 months warranty We give you 6 months warranty for these goods  ...

Second Hand Oil-Free Screw Compressor Atlas Copco ZT75VSDFF Inverter and dryer integrated 75 kW 8.75 bar 13.20 m3/min Year of Make: 2008 Hours: 63,129

Compressed air filters, fine filters, filters, flange filters -Manufacturer: Zander, flange filter type F17 -Filter type: F 17 XA D 1st stage/filter element 3075 X -Content: 20 liters -Operating pressure: 16 bar -Connection: DN 80 -Price per piece - Quantity: 2 pieces -Dimensions: 380/300/H1170 mm -Weight: 72kg

Compressed air filters, fine filters, filters, flange filters -Manufacturer: Zander, flange filter type F17 -Filter type: F 17 XA D 2nd stage / Filter element 3075 A -Contents: 20 liters -Operating overpressure: 16 bar -Connection: DN 80 -Price: per piece -Quantity: 2 pcs. -Dimensions: 380/300/H1170 mm -Weight: 72 kg

Stainless steel, VA, chrome-nickel steel, material cuts, stainless steel, chrome steel, rust-free -Material: cutting and manufacturing -Round steel, tubes and sheets -different materials: in stock -Material numbers: 4301, 4541, 4571, 1.4828, 1.4876, 1.4841, 1.4878 -Please ask for the material you want with the dimensions. -Price from: per kg and cut depends on material

geared motor, electric motor -Handover: in its current condition as inspected -Brake: not working -Speed: 80/40 rpm -Power: 1.0/0.6 kW -Design: B5 -Shaft diameter: 48 x 110 mm -Protection class: IP 44 -Price: per piece -Quantity: 2 pieces -Dimensions: 690/251/H320 mm -Weight: 55 kg

Steel products, flat steel, round steel, bar steel, tubes, profile tubes, square tubes, rectangular tubes, sheets, shaped steel, wide flange beams, narrow flange beams, plates, structural steel, rolled steel, drawn steel, I-beams -For our customers in the area, we offer material cut-to-size and contract manufacturing and a large selection of materials in stock -Sheets, pipes, profiles, bars and sections made of steel, stainless steel and non-ferrous metals such as aluminum, brass and gunmetal

Industrial vacuum cleaners, vacuum cleaners, dust extractors, industrial vacuum cleaners, floor vacuum cleaners, safety industrial vacuum cleaners -EX: protected -Manufacturer: Nilfisk, ultra-compact industrial vacuum cleaner with side channel blower -Type: CTS22 H Z22 -Connection: 400 volts -Power: 2.2 kW -Number: 3 devices available -Price per piece -Dimensions: 1100/770 / H1270 mm -Weight: 127 kg / piece

Fan, fan, electric motor, blower, electric motor, blower, centrifugal fan, emergency ventilation fan, flue gas fan, ventilation fan, exhaust gas extraction -Manufacturer: Ziehl-Abegg, centrifugal fan type DKHR 310-4 -Speed: 1370 rpm -Lesitung: 0.15 kW -Protection rating: IP 44 -Quantity: 12x blowers available -Price per piece -Dimensions: Ø 310 x 165 mm -Weight: 5.5 kg/pc.

Gear motor, electric motor -Motor comes from: Gansow scrubber-dryer -Connection: 24 volts -Speed: 180 rpm -Power: 0.5 kW -Construction: B5 -Diameter shaft: Ø 25 mm -Protection class: IP 44 -Number: 3x gear motors available -Price: per piece -Dimensions: 345/130/H165 mm -Weight: 12 kg

Roller conveyor, roller track, powered roller conveyor, roller track -with pneumatically driven centering unit -stable design -electrically powered -Drive motor: 0.18 kW 76 rpm -Conveyor speed: 25.05 m/min -Roller width: 1000 mm -Conveyor length: 1400 mm -Roller diameter: 105 mm -Rollers: rubberized -Shaft diameter: 25 mm - Delivery height: 960 mm, adjustable -driven: via belt -Number: 3x roller conveyors available -Price: per piece -Dimensions: 1400/1150/H960 mm -Weight: approx. 230 kg

Fan, ventilator, electric motor, blower, electric motor, blower, radial fan, emergency ventilation fan, flue gas fan Manufacturer: Ziehl-Abegg, radial fan type DKHR 560-6-6 -Speed: 855/625 rpm -Power: 0.47 kW -Fan diameter: 570 mm -Protection class: IP 44 -Number: 5x radial fans available -Price: per piece -Weight: 16.5 kg

Universal milling head, milling adapter, milling extension, angle milling head -Spare part: from a Stankoimport milling machine -Milling head: with quill -Recording: Exit -Recording: Entrance -completely swiveling -impact head -Equipment -Pitch circle -Dimensions: 1200/800/H300 mm -Weight: 200 kg -Sale only in full

Geared motor, electric motor, electric geared motor -Geared motor: with electric clutch -Engine VEM Type: KPER 90 L 4 -KEB gearbox type: ZG2IE0F90A200 -Speed: 79 rpm -Power: 1.5 kW -Design: B3 -Shaft: Ø 32 mm -Protection class: IP 55 -Quantity: 1 available -Price: per piece -Dimensions: 815/210/H260 mm -Weight: 53 kg