z kneader used for sale

A "Raster Zeulenroda" (today Zeulenroda Presstechnik) step press type "Paust 16.2" with 160 kN press force is sold. The machine was completely overhauled in 2006 and has been in use in 1-3 shifts since then. A visit is possible from Monday to Friday.

Used Ziegra UBE 10.000-2 streamice machine set on R404A that makes up to 10.000 kg ice each 24 hours. Complete with 4 Ziegra 1500 / 2500 ice makers, 2 Bitzer 6G-30.2Y-40P semi-hermetic reciprocating compressors with each an own suction accumulator, oil separator, liquid tank and liquid line filter drier. Further the ice machine set comes with 2 ECO ACE62B4H condensers and a Siemens Simatic touch panel. If you would like more information, please feel free to contact us. Specifications: Brand: Ziegra Type: UBE 10.000-2 Capacity: 10.000 kg/24h Refrigerant: R404A Dimensions: Part 1: 1800x1200x2880 mm (LxWxH) Part 2: 1380x1100x2500 mm (LxWxH) (2 Pieces) Condensers: 2450x1100x990 mm (LxWxH) (2 Pieces)

Manufacturer: Zentner Systems GmbH Model: Soltec ST 100 Year of Make: 2006 Serial number: 0505 / 06 Operating voltage: 3 × 400 V Mains frequency: 50 Hz Operating power: 3 kW Operating pressure (air): 6.0 bar Design: Closed stainless steel screen washing cabin Application: Automatic cleaning of screen printing frames Particularities: – EX signs available – Integrated exhaust air / exhaust system – Compact design with its own control cabinet Location: Schierling Viewing possible by appointment.

A Zionair sandblasting cabin is available. Cabin volume: 420l, internal dimensions X/Y/Z: 1200mm/600mm/580mm, max. workpiece weight: 40kg. Machine dimensions X/Y/Z: approx. 1300mm/950mm/1700mm, weight: approx. 125kg. An on site inspection is possible.

Various mixing and storage silos are available. 1) Stainless steel silo. 2) Stainless steel silo Zeppelin, year of construction: 1983, capacity: 32m³, friction angle range: 25°-45°, overpressure range: 5mbar-45mbar, max operating temperature: 50°C, bulk density: 0.6kg/dm³, silo height: 11250mm, silo diameter: 3000mm. 3) Stainless steel silo. 4) 3x identical HD-PE mixing silos, total height: approx. 10500mm, diameter: 3000mm, volume: approx. 49.5m³, mixing pipes: NW 150, motor power: 15kW. 5) 2x identical storage silos Zeppelin, year of construction: 1980, volume: 127m³, capacity: 119m³, silo diameter: 3500mm, inclination angle: 15°, hopper height: 1680mm, support ring height: 3700mm, total height: 17500mm. Documentation available. An on-site inspection is possible. Individual sale possible.

roll diameter: 162 mm : 50 mm Shaft revolutions: 8,5 U/min pressure hydraulic cylinder: 100 kN total power requirement: 1,5 kW weight of the machine ca.: 450 kg dimensions: 1100 x 800 x 1500 mm Domestic equipments: - Direct drive of all three shafts - Single delivery of the side rollers - Horizontally and vertically usable - Hydraulically movable side rectifier (via control panel) - 2 digital displays for the feed rollers - Hardened rollers - Mobile control panel The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Offered is a high-voltage switchgear device ZK8 System Calor Emag from Peters & Thieding. Year of construction 1994, standard series VDE 0670 (IEC 62271), rated voltage 24.2kV, insulation level 50/125kV, rated frequency 50Hz, operating current 630A, short-time withstand current 20kA, short-circuit duration 1s. Viewing is possible by arrangement.

: 300 kN stroke length max.: 235 mm : 200x24 mm bending capacity max. - round: 60x4,0 mm toolpiece height max.: 250 mm : 660x1250 mm work height max.: 900 mm return speed: 20 mm/sec working feed: 10 mm/sec total power requirement: 3 kW weight: 950 kg Domestic equipments: - semi-automatic NC control (99 programs with 16 steps each) - incl. bending bolt (without punch) - Incl. tool holder for dies - incl. foot pedal Equipment: - Stamp, smallest U = 145 mm 85 °    H = 250 mm, R = 5 mm - Quick change Monomatrize 85 °    H = 250 mm, V = 63 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Shaft Ø: 40 mm Bending Capacity: Flat bar upright at 500 mm Ø: 60 x 10 mm flat at 400 mm Ø: 100 x 15 mm square at 500 mm Ø: 35 mm L-iron leg outwards at 450 mm Ø: 50 x 50 x 6 mm L-iron leg inwards at 600 mm Ø: 50 x 50 x 6 mm T-iron T outwards/inwards at 600 mm Ø: 60 x 60 x 7/50 x 50 x 6 mm Round bar at 500 mm Ø: 35 mm Shaft speed: 7.5 rpm electr. Connection: 380 V, approx. 1.7 kW Space requirement: 910 x 640 x 1400 mm Weight: approx. 400 kg

dimensions of saw-band: 5.330 x 41 x 1,3 mm capacity 90 degrees: round: 460 mm capacity 90 degrees: square: 460 mm capacity 90 degrees: flat: 440 x 600 mm Cutting area at 45 degrees left: round: 445 mm : 410 mm Cutting area at 60 degrees left: round: 295 mm Cutting range at 60 degrees left: square: 295 mm table height: 890 mm cutting speed: 25 - 80 m/min total power requirement: 3,75 kW machine weight ab.: 1.500 kg dimensions: 2810 x 1135 x 1860 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

2002 Genie Z60/34 articulated boom lift, - Year of construction: 2002, - Self weight: 10.706 kg, - Operating hours: 6775h, - Max working height 20.3m, - Maximum range 11m, - Max load capacity 230kg, - Continuous turning

Adapters for tool presetters The adapter is inserted into the SK50 base holder of the tool presetter and thus serves as an intermediate module for Tool holders with size SK30 or BBT30. The adapter is calibrated and equipped with calibration balls.

band width: 500 mm band speed: 8-25 m/min plate thickness: 0,5-2 mm total power requirement: 2,2 kW weight of the machine ca.: 0,75 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 2900x1800x1100 mm Total power requirement: 0 kW Weight: 550 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

• Brand: EUREC, • Model: Z85, • Type: Double-shaft crusher on tracks, • Year of construction: 1999, • Availability: immediately, Weight: approx. 32 tonnes, • Shredder mouth width: 2.30 m, • Shredder mouth length: 1.80 m, • Shaft length: 1.85 m, • Hopper length: 5.40 m, • Hopper width: 2.50 m

Already working with the Doka Edge Protection System XP? Then this accessory package is your next logical move.  With original Doka railing clamps and XP posts, you’ll expand your system exactly where it matters †whether it’s for additional sections, larger areas, or extra safety along the edges.  🔧 100% original Doka XP parts  📦 Ready for immediate delivery †incl. reusable packaging  💶 Full package for just €5,399.†(net)  This package is ideal for anyone looking to extend their existing XP setup quickly and efficiently †no extra planning needed. Everything fits. Everything works. Just like youre used to.    Expand now †before you hit the limit.  The accessories are ready †you just have to grab them. 😉  👉 Ask. Decide. Go.  Price: from € 5399,00 ...

Maximum load capacity, modular flexibility, and quick assembly †the Meva MEP shoring tower is available at Form-on as a smart complete package for your construction project. ✅ Ideal for bridge and high-rise construction ✅ Stable, time-saving & versatile ✅ Delivered as a ready-to-use set †fast and reliable 📦 Only on market day: Secure your MEP complete package †available immediately , only while supplies last! 📩 Request your quote today & get your project off to a smart start! Price valid: per total quantity Total price: 29,999.00 EUR Partial quantity: not possible Subject to prior sale Quality mix This package contains items of our various quality levels. Please take the exact qualities from the product listing above. 20.00 x MEP-frame 55 (Art-No. 29-909-10), 2 stars 20.00 x MEP-frame 110 (Art-No. 29-909-15),  ...

💥 Robust. Modular. Easy to handle. Looking for used formwork panels that save you time, stress, and budget? Then this set of Doka Alu Framax Xlife panels (height: 2.70 m) is exactly what you need! 💡 Ideal for wall formwork in high-rise construction, tight spaces, or fast-paced jobsites. ✅ Your benefits at a glance: 🪶 Lightweight & easy to handle †aluminum frame for quick setup, even without a crane 📏 15 cm grid = fewer fillers, clean joints & faster planning 🧹 Easy to clean †powder-coated surface = less effort on site 🔁 Fully compatible with other Doka systems 🚧 Built for professionals who value quality & reusability 📦 Secure your Doka aluminum frame formwork now & kick off your next project smartly! Buying used aluminum formwork has never been this easy. Price: from � ...

🔧 Doka Adjustable Strut 220 IB †Excellent Used Condition 🔧   ✅ Application: The 220 IB strut is used as the lower bracing for the 540 IB element prop. ✅ Quality: Each strut is individually inspected and fully functional . ✅ Condition: Shows signs of careful use , but completely reliable . ✅ Delivery: Struts are delivered on stackable pallets . (⚠ Pallet not included in the price per piece)   💡 Summary: Durable Doka material in excellent condition †ready for your next construction project! 🚧 ❓ If you have any questions or need more information, feel free to contact us! 📞✉️ Price: from € 58,40 / PCS (excl. VAT). Partial quantity: possible Subject to prior sale Classified 3-star Serviced & ready to use. Professionally cleaned condition. Used formwork & scaffolding suit ...

x-travel: 710 mm y-travel: 250 mm z-travel: 400 mm table-size: 1200 x 300 mm control: konventionell tool adaptor: SK40 turning speed range: 50 - 2500 U/min quill stroke: mm total power requirement: 2,2 kW weight of the machine ca.: 1,7 t dimensions: 2,1 x 2,0 x 1,6 m Features: - Digital display - Coolant system - Huron milling head - Emergency stop device - Documentation The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 10000 mm y-travel: 1500 mm z-travel: 3000 mm Control: Heidenhain TNC 430 tool taper: ISO 50 spindle turning speed - stepless: 10 - 3000 U/min feed range: 10000 mm/min rapid traverse: 15 m/min main drive motor: 37 kW total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m CNC-control HEIDENHAIN TNC 430 40-station ATC NC-Universal Milling head, automatic positioning (A/B axis 0.001 / 0.001 deg) Chip conveyor Optional (price upon request): CNC rotary table Juaristi 3000 x 3000 mm - Table load 30 to - Longitudinal movement 2000mm - Separate CNC-control FAGOR The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The ZANASI 40 E model is a reciprocating motion machine designed for the processing and filling of hard two-part capsules, as well as their successive closing and ejection. Possibilities for powder dosing as well as granule dosing. Several powder formats available: Full format: 2,4, Cadence / hour: 40 000 capsules/hour , Positions: 6 , Machine absorption (Kw): 2.2 kW , Elec: 380 V / 50 Hz / 14.2 A

Proportional pressure control valve, R901344934, ZDREE6VP4-….; Rexroth, mint condition Please note: This is an original product and not a replica from... Special price If you have a VAT number, we will be happy to issue you with an invoice without VAT. Mint condition! - never been used and is in mint condition, - Comes from a spare parts warehouse of a certified production facility, 6 months warranty We give you 6 months warranty for these goods from the date of invoice. In case of any defect, which is not the fault of the buyer, the goods can be returned. We will refund the buyer only the product price paid to us. Updating in case of digital components is excluded. Also excluded is liability for direct and indirect consequential damages. Our terms and conditions apply, see our website. Austrian law applies without exception and court location St. Pölten.

Two-ply gluing machine for making large-format boxes

We can offer Krauss maffei extruder,moder ZE90A, manufactured in 2013, main motor power 884kw, large output, installed and used, auxiliary equipments available, serious buyer contact us.

We can offer Krauss maffei extruder,moder ZE90A, manufactured in 2013, main motor power 884kw, large output, installed and used, auxiliary equipments available, serious buyer contact us.

Year: 2009 - technically efficient, ready to work – after full service - discs: 500 mm - working length: 3700 mm - PC control (Windows XP) - online access - vertical and horizontal pneumatic clamps - automatic disc guards - roller feeder - support for longer profiles

HAKO snow blower, PTO drive . rpm.(in driving tr. left dr.), with attachment device quick coupling triangle cat. 0. Manually swivelling ejection chimneys, sliding skids. Clearing width approx. 1.15 m, clearing height approx. 1.20 m. Condition good, apparently unused, with flash rust. Chain drive for left-handed PTO. Other snow blower: Zaugg 55-110, working width 110 cm, PTO drive 1,000 rpm clockwise rotating i.F.; Discharge chute can be swivelled by hand crank, coupling plate with swivel screws. Winter service technology, used parts and more in stock, more on request ! Jodau Machine Trade Municipal, Environmental & Green Maintenance Technology Inh. Joachim Dau 24941 Flensburg, Wieselhof 29

Paddle Mixer Zasada -Type: ML600 -Capacity: 600 L -Including loading -Max. load: 200 kg -Max. rotation speed: 35 rpm -Right/left rotation -2 mixers -Year of production: 2012 -Dimensions with loading: 1950 x 2000 x 2650 mm -Dimensions without loading: 1950 x 1200 x 1500 mm -Machine made of stainless steel -Power supply: 400V 50Hz -Condition: used / very good / overhauled / ready to work

Complete set condensing Unit Rivacold with 1 compressor Copeland Scroll ZF24 for a freezing room with a capacity of 80 to 120 m3, Rivacold condensing unit -Compressor type: ZF24KVE-TWD -Cooling capacity: 15.7 kW at -5°C/40°C, 12.97 kW at -10°C/40°C, 7.03 kW at -25°C/40°C -Dimensions: 1750 x 1000 x 1500 mm -Number of fans: 2 x 500 mm Evaporator Rivacold -Type: RX50338 -Cooling capacity: 8 kW -Fin spacing: 8 mm -Electric defrost -Dimensions: 1750 x 570 x 460 -Number of fans: 3 x 350 mm We have 10 complete sets (condensing unit + evaporator) in very good condition/ready to work.

Grinding width 950 mm Ce version V400/50 1 belt combi unit design Steel roller for calibration  Grinding bug selection from the control panel Sanding shoe selection from the control panel  Sanding Pad Control On/Off FOX500KRT Electronic table positioning from the grinding table  Entrance and exit table extensions Moving carpet centering 

General Manufacturer: Monnier & Zahner Type: M651 Year of Make: 2007 Control: Fanuc Series 21i MB Travels: X 80 mm, Z 250 mm, A swivel axis +/-45°, W 250 mm Other axes: C-axis workpiece spindle, V-axis loader Working spindle Speed: 3,000 rpm Dimensions and weight Dimensions: 2,400 mm x 1,410 mm x 2,250 mm Weight: approx. 2,400 kg Condition Condition: Used Functional: Tested and fully functional

gebr. Stone Forming Machine/Board Paver, Manufacturer Zenith Type 860 AZ Production of core & attachment Simatic S5 control system with vitalization from Zenith Board size 1,400 x 950 mm max. production height 14 cm Quick Forming Clamping Pneumatic incl. complete circuit with: Aerial ladder Vehicle Group Drying rack Countersunk ladder Stone Remover Packager Board stacking transverse transport Board stacking device Board tray Parcel trolley circulation Parcel Magazine Horizontal strapping

: mit Zubehör serial number: 71309 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

General SKU359W976 MakeLeistritz TypeZSE 27HP-PH-40D Mach.No.3778 Year of construction2008 Sizes Screw diameter27 mm Main Features Motor15 KW L/D40 Specified Features - Double screw extruder MaterialStainless steel 2.4819 (Hastelloy C-276) Double screw extrudercheck Screw diameter27 L/D40 Co-rotatingcheck Number of heating zones:10 Electric heatingcheck DC-motor15 kW, 400 volt, 1750 rpm AC-motorcheck With variable speed drivecheck Screw speed30-500 rpm Information LocationBarneveld With switchgearcheck Floorspace3,65 x 1,15 m Total height1,80 m Weight1200 kg CEcheck Extra Specificationsthis unit comes with: -2x k-tron feeders. - control cabinet. - 3x temperature control units. - extruder barrel lift - spare parts Double screw extrudersLeistritzExtruders > Double screw extrudersBrand > Leistritz What you can expect from Foeth: -- Machine is in working condit ...

- standard machine - with the existing accessories - suitable for embossing and diecutting

General SKU388X977 MakeZirbus TypeVTS 300 LocationBarneveld CEcheck Pressure Working pressure0 Bar Vacuum possiblecheck Main Features MaterialStainless steel Surface2 m2 Specified Features - Freeze dryer Freeze dryercheck Cooling surface2 m2 Number of plates2x 9 Plate sizes500x450 mm Between the plates15 mm With condensercheck With cooling compressor2x MakeTecumsek TypeTFHT2511Z BR Cooling mediumR452a MaterialStainless steel 1.4571 (316Ti) Information No.2152 (typeplate on cooling instalation) Year of construction2006 With switchcheck Floorspace0,85x1,45 m Total height1,85 m Weight400 kg Extra SpecificationsWith vacuum pump, type D25B, cap. 25 m³/hFreeze dryersZirbusDryers > Freeze dryersBrand > Zirbus What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide ...

General SKU245X192 LocationBarneveld CEcheck MakeAtlas Copco TypeZL2 VSD 11 J 400Y Pressure Pressure buildup0.4 Bar Main Features Capacity8.1 m3/Min Motor11 KW Pressure0.4 Bar Specified Features - Blower Blowercheck Capacity485 m³/h Motor11 kW, 400 volt 2935rpm With sound absorbercheck InletDN80 MaterialMild steel Information No.4101951663 Year of construction2022 Mounted in sound absorbing boxcheck With switchgearcheck Floorspace1,0x1,25 m Total height1,45 m Weight460 kgBlowersAtlas CopcoBlowers > BlowersBrand > Atlas Copco What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU246T365 MakeFlottweg TypeZ 4D-4/454 No.006.047.00 LocationBarneveld Main Features MaterialStainless steel Motor30 KW Specified Features - Decanter Decantercheck 2-Phase decantercheck Screw diameter420/267 mm InletDN80 Liquid outletDN200 Solids outlet572x242 mm Motor30 kW 400 Volt With hydraulic unitcheck Motor4 kW 380-420 Volt Max. rotor speed3500 rpm MaterialStainless steel 1.4462 (Duplex2205) Information Floorspace3,5x1 m Total height1 m Weight2200 kgDecantersFlottwegCentrifuges > DecantersBrand > Flottweg What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

Labeling machine for top and bottom, with a ZODIAC printer for the top labels.

max. wheel diameter: 1250 mm gear width: 600 mm max. module: 16 min. module: 2 tooth width: 490 mm Zahnschrägungswinkel max.: 45 ° shifting: 200 mm max. number of teeth: 12 diameter of hob: 240 mm cutter length max.: 280 mm table diameter: 1020 mm milling spindle speeds (infinitely variable): 28 - 200 U/min power capacity: 25 kW weight of the machine ca.: 16,2 t dimensions of the machine ca.: 4,5 x 4,6 x 2,7 m equipped with: - universal hob head - change gears machine has been partly overhauled (electrical and machnical) and is now with programmable, digital Infeed The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Drilling and milling machine Hans Schreiner ZAY7040G, built in 2009, very good condition, 1.5 kW, 800 mm table length, 240 mm table width, 300 kgPrices subject to change, errors, printing and typesetting errors excepted

Hans Schreiner drilling,- & milling machine with 90° pivoting gear head and variable speed for the commercial demand. With halogenlamp and coolant system. Technical data: Spindle cone MT 4 Motor output power S1 1,5 kW, 400 V Weight 310 kg Table dimensions 800 x 240 mm max. workpiece height 400 mm Speeds 50 - 530 and 530 - 2600 rpm Max. drilling capacity in steel 45 mm Worktable travel x=500mm, Y= 175 mm Optional equipment: Underframe with coolant tub Drill chuck, quick release chuck, milling cutter and tools

The new cylinder brushing and grinding machine from Holzprofi Maker can be quickly and easily converted from a grinding machine to a brushing machine in just a few seconds. It is ideal for smaller workshops as it combines two machines in one. Advantages and features: - A wide range of surface treatment options - Easy and quick conversion from grinding to brushing - Many different brushes available for a variety of effects and editing options - Infinitely variable feed and roller speed for perfect results - Workpiece width up to approx. 1100mm - Precise adjustment of the grinding height for consistent results Technical data: Grinding width: 560 mm (1120 mm) Grinding height: 3 to 75 mm Roll diameter: Ø132mm Table dimensions: 592x530mm Dimensions of the table extensions (2x): 582x245mm Roll speed: 0 to 1800 rpm Feed speed: 0 to 7.5 m/min ØSuction connection: 100mm Engin ...

This 3-axis ZEUS FMO 140B was manufactured in 2000. It features a dual-spindle system with both horizontal and vertical capabilities, and a maximum speed of 4000 rpm. The machine includes a Selca 4045 CNC, a recently replaced handwheel, and a network board. Axis travels are 1200 × 650 × 500 mm. Consider the opportunity to buy this ZEUS FMO 140B horizontal machining centre. Contact us for more information about this machine.

This 3-axis Zayer 30KF 3000 vertical machining center was manufactured in 1997. It offers robust construction and precision for complex machining tasks. Ideal for those seeking reliable performance in a used machine. Contact us for more information.

This 3-axis Zayer KF 4000 was manufactured in 1989. It features a large table of 4,000 × 1,000 mm, capable of handling loads up to 10,000 kg. Equipped with a spindle speed of up to 3,000 rpm and a power range of 30–37 kW, it ensures robust machining capabilities. Consider the opportunity to buy this Zayer KF 4000 universal machining centre. Contact us for more information about this machine.

This Prima Power CP 4000 Zaphiro Laser Cutting machine was manufactured in the year 2013 and has 37978 laser hours. The machine has a laser power of 4 kW.

This 4-axis TAJMAC-ZPS H63 Standard was manufactured in 2005. It features a robust Siemens control system, X-axis travel of 1010 mm, Y-axis of 800 mm, and Z-axis of 1010 mm. The work table measures 800 mm in length and 630 mm in width. Ideal for precision machining, buy this TAJMAC-ZPS H63 Standard horizontal machining centre. Reach out for more information.

cutting diameter: 220 mm saw band length: 2480 mm table height: ca. 910 mm capacity 90 degrees: flat: 245 x 115 mm capacity 90 degrees: square: 195 x 195 mm capacity 45 degrees: round: 150 mm capacity 45 degrees: square: 140 x 140 mm capacity 60 degrees: round: 85.0 mm capacity 60 degrees: square: 85 x 85 mm turning speed range:: 45 + 90 m/min dimensions of saw-band: 2480 x 27 x 0.9 mm clamping width: max. 270 mm total power requirement: 0.75 + 1.1 kW weight of the machine ca.: 200 kg dimensions of the machine ca.: 1430 x 720 x 1700 mm New price in 2010 .. 2.400 Euro Special price on request Equipment: - For cutting profiles, pipes, solid materials made of iron - and non-ferrous materials - The saw arm can be tilted up to 60° for mitre cuts - Infinitely variable lowering via hydraulic lowering cylinder - Torsion-free, heavily dimensioned cast iron saw arm - 2 saw blade speeds for op ...