128,273 used machines on RESALE, but how to find them? Machine Search
Usable work area with cutting head: 1000 x 1200 mm Usable work area with milling head: 950 x 1150 mm Cutting/milling speed: 10 mm/sec - 500 mm/sec Acceleration: up to 5 m/sec2 Mechanical/addressable resolution: 0.01 mm Static repeatability: 0.02 mm Software data format: ASCII/HPGL RS-232 interface or RS-232/USB converter Plotter input buffer: 16 kilobytes Power requirements: 230 volts +-10% / 50-60 Hz / 450 VA Software: CoCut trial version can be downloaded for free. Converter is missing to be able to mill.
set of machines to manually produce hard covers etc. set consists of: - Record 54 - gluer, warm and cold glue, working width 54 cm - Rimbo 110 - double turning in station, working width 110 cm - Ottima 74 - nip roller press, working width 74 cm - Schmedt Prädeck - board positioning table, 60x40cm (extension possible)
Compressor, compressor two-stage type S6H-20.2Y, displacement 73 m3/h For blast freezers or deep freezes. Needed two pcs., checked in stock.
Die-sinking EDM BF 1200 ZENIT+ :::TECHNICAL SPECIFICATIONS::: X-axis travel: 1200mm Y-axis travel: 600mm Z-axis travel: 500mm Max piece weight: 250Kg C-axis: yes Number of electrodes: 6 Bowl dimensions: 1880 x 1073 x 565mm :::D DIMENSIONS AND WEIGHT::: Length: 2850mm Width: 2800mm Height: 2730mm Weight: 5500Kg
Intermittent Carton Packaging Machine ZHJ-150 Exhibition Machine/ Exhibition Machine Multifunctional Cartoning Machine ZHJ-150 ZHJ-150 automatic cartoning machine is suitable for packaging aluminum PVC blisters, round bottles and special bottles, Shaped bottles and similar products. Package inserts can be folded automatically, cartons can be erected, products can be fed and the cartons can be resealed (offset plug-in closure). Embossing can be made on the cartons. This machine has PLC control, with each station monitored by photoelectric sensors. If there is a problem detected during operation, the machine will automatically stop and display the fault. This machine can run as a single machine and can also be connected to a blister packaging machine and other pre-machines. The machine can be viewed at any time in 73084 Salach/Germany and tried out with your products. Dependin ...
Manufacturer: PFM Type: Zenith Inox Year: 2002 Capacity: ~50 pcs/min Electrical power: 4.5 kW Weight: 680 kg Optional: Piston filler with heated tank for processed cheese Condition: good, fully functional
Key data: 6000 mm, 2000 mm, 3000 mm
Machine Type: CNC Travelling Column Milling Machine Make ZAYER Type KCU6000 Year of construction 1992 Control type Heidenhain TNC 415 X-way (mm) 6,000 Y-off (mm) 2,000 Z-off (mm) 3,000 Speeds from (rpm) 20 - 1,800 Tool holder BT50 Feed longitudinal (mm/rev) 5 - 5000 mm/min Feed Transverse (mm/U) 5- 5000 mm/min. Vertical feed rate (mm/rev) 5- 5000 mm/min. Rapid traverse 10,000 mm/min. Total power(KW) 34 Length (mm) 11,000 Width (mm) 2,500 Height (mm) 7,000 Weight 31.000 kg Information 'Juaristi MG6' rotary table: 1500 x 1200 mm With coolant pump Cooling system: 2.5 bar Tool cooling: 15 bar
Producent INTOS Zebrak Tjechië Type FNGJ 20 Chalkboard afmeting breedte x lengte 400 x 256 mm Longitudinal Plaatsing X=as 450 mm Dwarsverplaatsing Y=as 300 mm Verticaleverplaatsing Z=as 350 mm Spindle opname SK 40 DIN 2080 Spindle toerental 50 -2500 rpm. Aantal toerentallen 18 Sheet voeding X-Y as 8-400 mm/min. Sheet voeding Z as 4-200 mm/min. Rapid traverse X-Y as 2400 mm/min. Rapid traverse Z as 1200 mm/min. Electrified capacity 2.2 kW Afmetingen L x W x H 1735 x 1475 x 1660 mm Weight 1660 kg Standaard toebehoren Koelmiddel inrichting Heidenhain uitlezing met taster
Double Column - Hydraulic Press RASTER ZEULENRODA (WALTER) Type WUP S 60Masch. No. 136 / 7 (156-165) Year of manufacture 1999Basic machine from 1987, in 1999 Overhauled with new controlPressure capacity 60 ton. Stand width 1090 mmStand passage laterally 265 mm (one-sided) Plunger area 650 x 300 mmAdditional plate on ram 990 x 550 x 60 mmTable area 990 x 550 mmPlunger stroke max. 320 mmInstallation height 330 or 390 mmTable height above floor 980 mmHydraulics Operating pressure 320 barRapid traverse downward 75
Vibratory Spiral Conveyor / Sorting Device / Spiral Conveyor / Vibratory Conveyor WEBERVibratory Bowl, Sorting Device / Screw Feeder with Vibratory Conveyor for Screwdriving TechnologyFeeding System, Feeding DeviceType: ZEM 360Masch.- No.: 1113557 Year of Construction: 2004Pot Diameter Top: 360 mmPot Diameter Bottom: 250 mmPot Inner Height: approx. 110 mmSorting Lane Width: approx. 20 mmFilling Weight: approx. 12 kgFilling Quantity: approx. 3 LitresControl Voltage: 24 Volts DC (external power supply is required)Mains connection: 230 Volts, 50 Hz. Operating pressure: 6 bar control unit
Sanding range: 2000x900mm, transverse movement: 875mm, longitudinal movement: 2450mm, distance table to spindle center: 845mm, magnetic clamping plate dimensions: 2000x800mm, max. table load: 2.3t, feed rate longitudinal axis: 1000-30. 000mm/min, feed transverse axis: 0,01-2000mm/min, feed vertical axis: 0,001-1500mm/min, grinding wheel dimensions: 500x100x203,2mm, power grinding spindle motor: 22kW, length: 6800mm, width: 3450mm, weight: 13t. On-site inspection is possible.
A Zinser plasma torch cutting system is available. Table dimensions X/Y: 2000mm/6000mm, plasma attachment: Hypertherm HPR260, extraction system: Donaldson, draw channel length: 10m. Including various spare parts for the burner head. The automatic gas console is defective. Documentation available. On-site inspection is possible.
An eroding island consisting of two die-sinking EDM machines and an automation system is available. 1) Zimmer & Kreim ZK Genius 700, year of manufacture: 2015, travel X/Y/Z: 400mm/350mm/350mm, table dimensions X/Y: 575mm/500mm, max. workpiece weight: 700kg, generator output: 96A, path eroding: CIMCO, operating hours: 22056h. 2) Zimmer & Kreim ZK Genius 700, year of manufacture: 2019, travel X/Y/Z: 400mm/350mm/350mm, table dimensions X/Y: 575mm/500mm, max. workpiece weight: 700kg, generator power: 96A, path eroding: CIMCO, operating hours: 8255h. 3) Automation Zimmer & Kreim Chameleon Quad, year of construction: 2015, electrode positions: 176, pallet positions with loading drawer: 9, double rotary gripper for Erowa ITS and single gripper for UPC pallets. Overall system dimensions X/Y: approx. 3000mm/6200mm. Including a Kraft & Bauer fire extinguishing system with suction device. Documenta ...
A smoke melting system is available. Components: Furnace, conveyor belt, electric stacker, melting container, ingot casting belt. Total plant dimensions X/Y/Z: approx. 6000mm/3500mm/3800mm, total plant weight: approx. 4500kg. Documentation available. On-site inspection is possible.
Control panel: Siemens SIMATIC HMI, connected load: 80kW, weight: 1.85t, operating hours: approx. 4500h, with Kreyenborg feed hopper, year of manufacture: 2017, and Trendelkamp screen changer. Documentation is complete, on-site inspection is possible.
Individual sale possible. A variety of semi-automatic and automatic window construction machines are available. 1) Selecta BSS, year of manufacture: 1994, machine dimensions X/Y/Z: approx. 800mm/500mm/1200mm, weight: approx. 50kg. 2) Pneumatic press Urban, year of manufacture: 2011, operating pressure: 0.8MPa, air consumption: 4l/stroke, stroke: 20mm, machine dimensions X/Y/Z: approx. 850mm/850mm/1200mm, weight: approx. 130kg. 3) Pneumatic grooving machine Hoffmann PU2-VH, year of construction: 2002, machine dimensions X/Y/Z: approx. 800mm/1200mm/1400mm, weight: approx. 200kg. 4) Hoffmann PP2-FR chain milling machine for mullions and transoms, year of manufacture: 2004, machine dimensions X/Y/Z: approx. 800mm/1200mm/1400mm, weight: approx. 200kg. 5) Selecta FC 106, year of manufacture: 1994, machine dimensions X/Y/Z: approx. 1000mm/800mm/1550mm, weight: approx. 50kg. 6) Batimet FOM wood ...
capacity in kVA: 30 kVA weight: 213 kg turning speeds: 1500 U/min working hours, read off: 3 : . current distributor: . The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: Zinken : diverse Stapler fork length: diverse Längen mm sale: 1000 Euro je Tonne Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
workpiece diameter: 50 mm threading length: 100 mm thread pitch: mm total power requirement: 1 kW weight of the machine ca.: 1500 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
max. width of grinding wheel: 50 mm ratio: 0 max. dia. of grinding wheel: 400 mm total power requirement: 3 kW weight of the machine ca.: 1000 kg dimensions of the machine ca.: m Pre-Dressing Device for Gear Grinding Wheels The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
workpiece diameter: 30 mm workpiece diameter: 30 mm threading length: 110 mm threading length: 110 mm thread pitch: 0,5-2,75 mm/GG thread pitch: 0,5-2,75 mm/GG total power requirement: 4,5 kW total power requirement: 4,5 kW weight of the machine ca.: 1,7 t weight of the machine ca.: 1,7 t dimensions of the machine ca.: m dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Safe for Digital Media, 10 drawers, int. 500/850/1450 ext. 850x1200x1850 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 9200 mm y-travel: 1600 mm z-travel: 2400 mm dia. of test piece: mm working area: mm dist. between centers: mm control: ZEISS C 99 total power requirement: kW weight of the machine ca.: 30 t dimensions of the machine ca.: 10 x 3,6 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
workpiece diameter: 8-125 mm grinding depth: 130 mm clamping length: 50-1100 mm max. workpiece diameter: 0 mm min. workpiece diameter: 0 mm workpiece length: mm total power requirement: 1 kW weight of the machine ca.: 500 kg dimensions of the machine ca.: m T E C H N I C A (Switzerland) Centre Hole Grinding Machine Model ZSM 1000 Year approx. 1975 Serial No. J 1400 _______________________________________________________ Distance between centres 50 – 1,100 mm Height of centres 145 mm Workpiece Ø 8 – 125 mm Max. centre hole taper Ø 2 – 50 mm Max. centre hole taper angle 60 ° Clamping range of vice 4 – 150 mm Stroke of grinding head 130 mm Stroke of grinding tool on workpiece 0.75 – 5 mm Grinding tool Ø ...
x-travel: 850 mm y-travel: 1200 mm z-travel: 600 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Universal 3D measuring center, double-column, modern software, many accessories The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
workpiece diameter: 125 mm grinding depth: 50 mm clamping length: 2000 mm total power requirement: 0,5 kW weight of the machine ca.: 1000 kg dimensions of the machine ca.: m T E C H N I C A (Switzerland) Centre Hole Grinding Machine Model ZSM 5100 – 2.000 Year approx.. 1975 S/N 66 32 7872 – J 3278 _______________________________________________________ Distance between centres 50 – 2.000 mm Height of centres approx. 125 mm Workpiece Ø in clamping Vice 8 – 125 mm Swing of workpiece over tailstockguide 290 mm Swing of Workpiece max. over grinding head pillar 300 mm Max.weight of workpiece 250 kg Max. centre hole taper Ø 2 – 50 mm Max. centre hole taper angle 60 ° Clamping range of vice approx. 5 – 160 mm Grinding head ...
: 30 mm : 30 mm L-beam: 20 x 20 x 4 mm flat steel: 25 x 6 mm Axis diameter: 20 mm work speed: 11 U/min total power requirement: 0,2 kW weight of the machine ca.: 80 Kg dimensions of the machine ca.: 0,6 x 0,6 x 1,5 m Profile bending machine with: - Foot pedal for right/left rotation - Digital display - 1 set of standard rollers - 3 rollers are driven - Horizontal or vertical operation The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
cutting diameter: 185 mm saw band length: 2.085 x 20 x 0,90 mm table height: 915 mm band speed: 35/70 m/min capacity 90 degrees: round: 185 mm capacity 90 degrees: square: 150 mm capacity 90 degrees: flat: 220 x 150 mm connected load frequency: 400 V total power requirement: 0,8 kW weight of the machine ca.: 195 kg dimensions of the machine ca.: 550 x 1.280 x 1.740 mm mm Metal band saw with stepless electronic speed control and automatic lowering. • Selector switch for hydraulically controlled or manual band arm lowering • Saw arm can be swiveled up to 60 ° to the right • Quick-action vice • Belt guide with 8 ball bearings • Hydraulic saw band tension with tension pressure display and band break shutdown •Incl. Coolant system •Incl. Machine cabinet The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
cutting diameter: 220 mm saw band length: 2450 x 27 x 0,9 mm table height: 915 mm band speed: 35 + 70 m/min connected load frequency: 400 V capacity 90 degrees: round: 220 mm capacity 90 degrees: square: 210 x 210 mm capacity 90 degrees: flat: 230 x 185 mm total power requirement: 1,2 kW weight of the machine ca.: 240 kg dimensions of the machine ca.: 870 x 1550 x 1740 mm The Zimmer Z241/R is a self-lowering saw for miter cuts from 0 ° - 60 ° left. After the cut, the machine stays through one Safety limit switches stand. The reduction is infinitely variable Hydraulic system adjustable. The saw arm can be raised after the cut any position. The saw arm remains at the desired position stand. The Z241 / R has the following features: Hydraulic cylinder, emulsion pump, eccentric tensioner, base, saw band, 400V Connector -16A- The machine is completely assembled and delivered ready for use. ...
The 2009 Zalkin CA 5 360 NG is a used capping machine, specifically a screw capper, developed by Zalkin. This machine was used for capping plastic bottles with a capacity of up to 2,400 ml. It works with Pano TO 100 mm PP HOmao caps without liner.
Two low-speed Zerma beside-the-press grinders are available. 1) Zerma GSL-180/430, year of manufacture: 2003, rotor diameter: 180mm, rotor width: 430mm, rotor speed: 150rpm, drive power: 4kW, number of rotor knives: 45, number of stator knives: 2, min. sieve hole diameter: 5mm, weight: approx. 250kg. 2) Zerma GSL-180/300, year of manufacture: 2003, rotor diameter: 180mm, rotor width: 300mm, rotor speed: 150rpm, drive power: 4kW, number of rotor blades: 30, number of stator blades: 2, min. screen hole diameter: 5mm, weight: approx. 250kg. Documentation available. On-site inspection is possible. Individual sale possible.
Two identical vertical flow-wrapping machines from PFM are available. 1) PFM Zenith, year of manufacture: 2012, weight: approx. 870kg, connected load: 5kW, packaging output: approx. 60/min. 2) PFM Zenith, year of manufacture: 2009, weight: approx. 980kg, connected load: 6kW, packaging capacity: approx. 60/min. Both machines were used in the food industry for packaging individual bags in a large outer bag. Documentation available. On-site inspection is possible.
Three Illig punching machines are available for the precise punching of thermoformed plastic parts from film material. Working width: approx. 900mm, working height: approx. 120mm, roller diameter: approx. 196mm, machine dimensions X/Y/Z: approx. 2500mm/1300mm/1600mm, weight: approx. 750kg. Including two hydraulic punching machines Wolf EHPT 6E and two manual swivel arm punching machines. On-site inspection is possible.
Four industrial sewing machines are available. 1) Dürkopp. 2) Yamato ZF1020-X4DF-20/BT13. 3) Juki LH-1152-4. 4) Pfaff 439-3.
A precise Kuris textile cutting machine including peripheral equipment is available. Cutting height: 55mm, max. cutting speed: 45m/min, positioning speed: 60m/min, working width: 1930mm, machine weight: approx. 4000kg. Including 50kW vacuum pump and tables. Documentation available. On-site inspection is possible.
A combined heat and power unit (CHP), consisting of three diesel generators installed in containers, is available. 1) Engine: MAN 12-cylinder turbo, type: D 2842 LE 20, generator: Krauter, type: D-SYN-GEN, kVA: 400, kW: 360, A: 577, Hz: 50, speed: 1500 rpm. Including DELF synchronization, heating water outlet, table cooler, preheating and oil change device. 2) Engine: MAN 12-cylinder turbo, type: D 2842 LE 20, generator: Leroy-Somer, type: LSA K 475 L10, kVA: 375, kW: 300, A: 400, Hz: 50, speed: 1500 rpm. Including DELF synchronization, heating water outlet, table cooler, preheating and oil change device. 3) Engine: Daimler Benz 8-cylinder turbo, type: AGV 12, generator: Krauter, type: D-SYN-GEN, kVA: 350, kW: 230, A: 400, Hz: 50, speed: 1500 rpm. The combined heat and power unit has a total output of around 1100kVA. Including table cooler, V2A heat exchanger, containers and switch cabin ...
An automatic valve bag filling system for cement bags Rotopacker is available. Packaging capacity: 2400 bags/h, number of filling stations: 8, filling station type: spouts, cylinder: Festo pneumatic cylinder, cylinder stroke: 150mm. Documentation available. On-site inspection is possible.
A placement line with three (3) Zevatech/Juki placement machines, one (1) Zevatech/Juki tray changer and one (1) DEK screen printer is available. 1) 2x Zevatech/Juki FS730, year of manufacture: 1995, max. placement capacity: 3000/h, placement modules: 4, placement accuracy: +/-0.01mm, changeover time: 0.7s-1.1s. 2) Zevatech/Juki FM740, year of manufacture: 1997, max. placement capacity: 10000/h, placement accuracy: +/-0.05mm, board dimensions X/Y: 400mm/350mm, feeder inputs: 80/8mm, placement modules: 2. 3) Tray changer Zevatech/Juki TR4NEZ, year of manufacture: 1995. 4) SMD screen printer DEK 265, year of manufacture: 1995, printing process: Stencil printing, max. PCB size: 450mm/340mm, printing accuracy at 6 Sigma: +/-12.5µm, max. PCB thickness: 6mm, dimensions X/Y/Z: approx. 1400mm/1600mm/1500mm, weight: approx. 900kg. All machines are part of a complete system and are controlled by ...
A mint condition and oil-free Atlas Copco screw compressor system with hardly any operating hours is available. Volume flow at 1.9bar and 193kW: 67m³/h, max. pressure: 2.75bar, output: 200kW, outlet air temperature: 176°C, operating hours: 41h. Including electronics, sound enclosure and starter. Documentation available. On-site inspection is possible.
A fully automatic Dollberg counting and filling machine for tablets and capsules is available. Tablet diameter and output: 5mm: 2000 pieces/min, 9mm: 1800 pieces/min, 10mm: 1600 pieces/min, 12mm: 1400 pieces/min, 15mm: 1000 pieces/min. Capsule size and output: size 5: 1200 pieces/min, size 4: 1100 pieces/min, size 3: 1000 pieces/min, size 2: 900 pieces/min, size 1: 800 pieces/min, size 0: 600 pieces/min. Container feed: 60 containers/min, counter dimensions X/Y/Z: approx. 900mm/550mm/500mm. Documentation available. On-site inspection is possible.
Various gas forklift trucks, electric forklift trucks and electric high-lift trucks from various manufacturers are available. 1) Heli gas forklift truck, load capacity: 2500kg. 2) Heli gas forklift truck, load capacity: 2500kg. 3) Jungheinrich electric forklift truck, load capacity: 2000kg. 4) Jungheinrich electric high-lift pallet truck, load capacity: 1600kg. 5) Electric high-lift pallet truck Linde, load capacity: 2000kg. On-site inspection is possible.
longitudinal travel: 400 mm cross travel: 160 mm table length: - mm table width: - mm total power requirement: - kW weight of the machine ca.: - t dimensions of the machine ca.: - m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
longitudinal travel: 400 mm cross travel: 160 mm table length: - mm table width: - mm total power requirement: - kW weight of the machine ca.: - t dimensions of the machine ca.: - m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
number of spindles: 6 diameter: 160 mm turning length: ? mm total power requirement: 0 kW weight of the machine ca.: 0,9 t dimensions of the machine ca.: 1,20,81 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
measuring range X-axis: 300 mm measuring range Y-axis: 250 mm measuring range Z-axis: 600 mm tool diameter: mm Table dimensions: mm Control: weight: 700 kg dimensions of machine: 2600 x 1400 x 1900 mm coolant tank: 800 x 600 x 920 mm Presetting, shrinking and measuring machine Software saturn 1 Zoller Multivision II Without toolholders. On 30. May 2022 the machine was checked by a technician from ZOLLER. Shrinking is currently not possible. The induction spool and the control unit for it must be renewed. The purchase price of a comparable new machine (incl. software) from ZOLLER is approx. 100.000 EUR, with a current delivery time of approx. 52 weeks ! The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter: 325 mm turning length: 1000 mm swing diameter over bed slide: 250 mm Swingdiameter in the bed bridge: 440 mm reus: 12 (85-2000) U/min tail stock: MK 3 quill stroke: 100 mm diameter of quill: 40 mm spindle taper: DIN 55027 Nr. 5 spindle bore: 32 mm feed: längs 0,006 - 1,77 m/min feed: quer 0,003 - 0,885 m/min total power requirement: 2,2 kW weight of the machine ca.: 770 kg dimensions of the machine ca.: 2150 x 950 x 1350 mm Furnishing: - Cooling device - Machine light - chip rear wall - Spindle protection - Lathe chuck protection - Tool holder protection - Foot pedal with braking function CE - Interchangeable gears incl. Optional equipment - 3-jaw chuck Ø 160 mm type 3204/ DIN6350, BISON - MULTIFIX quick-change holder type A, incl. 4 tool holders - 2-axis digital display DRO Newall The data for this ad was created with ModulMWS - the software solution of LogoTech oH ...
: 0,6 t : -- mm : -- mm consisting of: 30x article no. 2-280510 Quick release pin short - Clamping of 2 components - burnished - with twist lock 8x article no. 2-280410.N Universal stop 150 L - nitrided - nitrided - as standard with fine scaling on both sides 4x article no. 2-280420.N Universal stop 225 L - nitrided - nitrided - as standard with fine scaling on both sides 8x article no. 2-280110.G Stop and clamping angle 175 L - cast / black oxide finish - Hole / elongated hole - Cast / burnished 2x article no. 2-280162.N Stop and clamping angle 500 G - nitrided - Left stop - nitrided 1x article no. 2-280166.N Stop and clamping angle 750 G left - nitrided - Left stop - nitrided 1x article no. 2-280167.N Stop and clamping angle 750 G right - nitrided - stop on the right - nitrided 1x article no. 2-280910 Tool trolley - painted - Permissible total weight 240 kg 1x article no. 2-280164.N S ...
carrying capacity: 1400 kg dimensions: 1690 x 950 x 1700 mm While stocks last 4x hinges the pallet frames are foldable Weight: approx. 9.5 kg for 1200x800x200 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
diameter: -- mm workpiece length: -- mm work piece width: 0 - 20 mm speeds: 2850 U/min range of angles: 0 - 60 (stufenlos) ° weight of the machine ca.: 19,5 kg Maximum chamfer width 20 mm + face machining Designed for chamfering and deburring straight edges, for the so-called FACING - removing an unwanted layer of material on the Front side of the workpiece, which is created, for example, by flame cutting a sheet metal. Specially developed for the production of visible chamfers and weld preparations. Powerful electric drive for extreme Charges. High performance motor stepless adjustment of the working angle in the range of 0° - 60° FACING - Edge processing at an angle of 0° to remove unwanted ones Layers of material after flame cutting The unique mechanical scale to adjust the bevel width for higher precision A very compact and ergonomic design for high work productivity Circum ...
turning diameter: 760 mm turning length: 3000 mm swing diameter over bed slide: 520 mm centre height: 380 mm reus: 17 (7,5 - 1015) U/min tail stock: MK6 quill stroke: 225 mm diameter of quill: 105 mm spindle bore: 132 mm feed: längs 0,039 - 18 mm/min feed: quer 0,02 - 9 mm/min total power requirement: 15 kW weight of the machine ca.: 4700 kg dimensions of the machine ca.: 4900 x 1650 x 1650 mm - Coolant device - Machine light - Chip back wall - Spindle protection - Lathe chuck protection - Tool holder protection - Interchangeable gears Special equipment - 3-jaw chuck Ø 250 mm type 3204/ DIN6350, BISON - MULTIFIX quick-change holder type B, including 4 tool holders - 3-axis digital display DRO Newall - Foot pedal with brake function CE The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
maximum number of results exceeded
please refine your search
