138,027 used machines on RESALE, but how to find them? Machine Search
The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Press capacity: 315 ton Ram stroke adjustable: 30 - 100 mm Slide adjustment: 100 mm Shut height (stroke down, adjustment up): 370 mm Table surface area : 1600 x 1100 mm Slide area: 1600 x 1100 mm Hole in table: 600 x 180 mm Number of strokes: 15 - 180 s.p.m. Table height over floor: 1200 mm Required power: 170 kW Height over floor approx.: 4900 mm Dimensions L x W x H: 4900 x 1900 x 4900 mm Weight of machine approx.: 55 ton
The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 150x1750 mm speed: 15/30 m/s : 83 dB engine output: 1,27/1,7 kW weight: 145 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
width of the strips: 2000 mm band length: 75 mm band speed: 16,5/33 m/s turning speeds: 1400/2800 U/min weight of the machine ca.: 75 kg Volume: 83 dB The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
width of the strips: 75 mm band length: 2000 mm band speed: 33 m/s weight of the machine ca.: 90 kg Power: 3 KW 400V / 50Hz Volume: 83 dB The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Decanter Z53-4/454 manufactured in stainless steel by FLOTTWEG in 2003. Technical features Model Z53-4/454 Year of manufacture 2003 Maximum speed 3250 rpm Maximum sediment density 1.3 g/cm³ Drum inner diameter 529 Discharge diameter 315 mm Seal material NBR Working temperature 0/100 ºC Drum motor 63 kW mm Screw motor 15 kW Equipment configuration Electrical panels Hydraulic power pack Slide gates Transport information Weight 5300 Kg Documentation CE Certificate Maintenance Manual Operation Manual Drawings Electrical Diagrams Electrical Panel Manual Condition Inspected Made by FLOTTWEG
Decanter Z4E-4/454 made of stainless steel by FLOTTWEG in 2004. Material Stainless steel Technical features Model Z4E-4/454 Year of manufacture 2004 Maximum speed 4200 rpm Maximum sediment density 1.4 g/cm³ Working temperature 0/100 ºC Documentation CE Certificate Maintenance Manual Operation Manual Drawings Electrical Diagrams Electrical Panel Manual Condition Inspected Made by FLOTTWEG
bore: 22 mm weight: 92 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore: 16 mm weight: 13 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore: 16 mm weight: 109 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Manufacturer: Weger Zuluftgerät, Type: ZL 30 S, Year: 2013, Control: no, Zuluftleistung m³/h: 6000, Kw output: 2,2, Heizmedium : Warmwasser , Temperatur vor-rücklauf: 90-70, Taschenfilter Typ: yes, Pumps: no, Year :2013
Manufacturer: Pilz Zentraleinheit C-P8-ZE-32, Type: 32 K, Model: 306097,
Manufacturer: Berkmann Zuluft und Abluft Spritzstand, Year: 2009, Control: yes, Heizmedium : Gas, Heat recovery: yes, Electronic control board: yes, Number of spray booths: 1, Number of evaporation booths: 1, Abluftventilator m³/h: 14000, Underfloor exhaustion: yes, Supply air system: yes, Dachausführung: yes, Zuluftgerät kW Leistung 1: 232, Exhaust air device: yes, Ex-installed lamps: yes, Heat recovery: yes, Rückwärmezahl %: 38, max. Wärmerückgewinnung kW: 77, Overall heating output: 160, Year :2009
Manufacturer: Vakuumsaugtisch zum schleifen Plattenmaterial, Year: ca2000, FREETEXT1: Tischlänge mm 1700, FREETEXT2: Tischbreite mm 400 , FREETEXT3: Saugerreihen 1, FREETEXT4: Drehbar stern, FREETEXT5: Aushebung, FREETEXT6: Höhe verstellbar1030 mm, FREETEXT7: Busch Vakuumpumpe, Year :ca2000
Manufacturer: Ziwo, Type: CL 11.10, Year: 1996, Work piece width min-max mm: 0 - 300, Min.-max. workpiece length in mm: 200, Min.-max. workpiece height in mm: 5 - 150, Wight approx. kg: 210, FREE TEXT: Beschickung, Year :1996
Manufacturer: Ligmatech, Type: Stapelmat ZHK 10, Year: 1990, Control: Ligmatech, Work piece width min-max mm: 140-800, Min.-max. workpiece length in mm: 160-1200, Min.-max. workpiece height in mm: 10-60, Year :1990
bore: 22 mm weight: 214 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore: 16 mm weight: 24 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
MODUL ZFWZ 630 Gear hobbing machine Wheel diameter 630-710 mm Gear width 400 mm Module 1-10 Max. axial feeding travel 400 mm Max. tangential feeding travel (hob shift) 200 mm Max. helix angle 45 degrees Min. number of teeth hobbed 10 Min. number of teeth hobbed with indexing drive 5 Max. hob diameter 200 mm Max. hob length 250 mm Diameter of working table 580 mm Hole in working table 100-250 mm Depth of hole in working table 45-300 mm Distance center of hob to working table surface 175-575 mm Driving taper for hob arbor (step taper) 50 mm Hob speeds of universal hobbing head steeped 50-400 rpm Milling spindle speeds (infinitely variable) 40-400 rpm Power capacity 29 kW Machine dimensions 3380x2715x2250 mm Machine weight: 9200 kg
DC motor Stromag 70 kW, gearbox 2 x 960 Nm, with Coperion ZSB 70 side feed. The worm shafts and the end head are missing. Therefore, sales as spare parts carriers.
x-travel: 7.000 mm y-travel: 2.000 mm z-travel: 1.250 mm Control: Heidenhain iTNC 530 Internal cooling system: 15 bar milling head: Automatisch 0,001 spindle turning speed range: 4.500 U/min spindle drive: 37 kW taper ISO: 50 tool change unit: 60 Chip coveyor: Inkl. rapid traverse: 20/10 m/min total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m -CTS 15 bars -Controlled milling head (pos. Accuracy 0,001) -60 tools -37 kw spindle motor -rapid 20/10 m min -4500 rpm -iso50 -Renishaw RPM60 -chip conveyor -extra milling head (spare) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore: 16 mm weight: 41 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
roll diameter: 76-86 mm Shaft diameter: 20 mm Shaft revolutions: 11 U/min Bending capacity round tube: 30 mm : 25x6 mm Angle iron: 20x20x4 mm Drive: 0,18 kW range L-W-H: 530x420x500 mm weight: 80 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 1016 mm y-travel: 610 mm z-travel: 760 mm total power requirement: kW weight of the machine ca.: t required space: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Zucchelli Forni Modular 2C2T Modular oven Serial: 2020E0860 2020, Stainless, two deck modular oven, chamber size 800mm x 600mm x 160mm, with adjustable temp and time controls, stone based, electric, 11.3Kw, mounted on mobile rack storage, 3Ph
SC3503.11.001 BB3503.11.001 68-92 mm further data on request
number of spindles: 6 diameter: 160 mm turning length: ? mm total power requirement: 0 kW weight of the machine ca.: 0,9 t dimensions of the machine ca.: 1,20,81 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
carrying capacity: 1400 kg dimensions: 1690 x 950 x 1700 mm Technical data: Usable depth: 1x 900 mm, 1x 550 mm, 2x 450 mm Usable height: bottom compartment 450 mm, otherwise 300 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
max. wheel diameter: 400 mm gear width: 275 mm gear width: 275 mm max. module: 6 weight of the machine ca.: 5,5 t shifting: 100 mm dist. cutter spindle - workpiece spindle: 40/265 mm hob turning speeds: 50-400 U/min The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Tool used 320x24x58, n 5600 - 2300 HW, BLAA further data on request
High-Energy Ball Mill for Sale Zoz Simoloyer® CM100b with Auto-Batch System AB100 Industrial High-Energy Milling System – Like New – Immediately Available Overview: This offer comprises a Zoz Simoloyer® CM100b Semi-Turnkey System, manufactured in 2013, complete with the Auto-Batch System AB100 and a completely modernized electronic control system. The complete installation has accumulated only one hour of operating time (commissioning and demonstration only) and is therefore in mint, like-new condition. The system represents a rare opportunity to acquire a fully automated high-energy milling solution without the long lead times associated with new equipment. Designed for demanding research and industrial production environments, the system is ideally suited for the processing of advanced materials, nanostructured powders, oxide dispersion strengthened (ODS) alloys, batter ...
Key data: 13 KW, 17 kVA, 400 V
Net price (excluding VAT) = 1.950,- € Gross price (incl. VAT) = €2,320.50 - - - - - Lister generator set 17 kVA - - - - - Engine: - Lister (English manufacturer of industrial diesel engines) - 3 cylinders -Diesel -Air-cooled - 1500 rpm - - - - - Generator: - 17.2 kVA - 230 / 400 volts - 50 Hertz - - - - - Condition: -Used - A test run was done - The engine starts and runs well - The generator does not generate voltage - A used replacement generator can be purchased for an extra charge (see Fig. 5) - - - - - Scope of delivery: - Lister generator set 17 kVA - Consisting of motor and generator - Installed on a metal base frame - For an extra charge, a used 20 kVA generator can be purchased (see picture 5) - - - - - Transport: - Germany-wide transport is possible for an extra charge - To be able to quote an exact freight price, plea ...
Key data: 16 KW, 20 kVA, 400 V
Net price (excluding VAT) = 2.250,- € Gross price (incl. VAT) = €2,677.50 - - - - - Lister generator set 20 kVA - - - - - Engine: - Lister (English manufacturer of industrial diesel engines) - 3 cylinders -Diesel -Air-cooled - 1500 rpm - - - - - Generator: - 20 kVA - 230 / 400 volts - 50 Hertz - - - - - Condition: -Used - A test run was done - The engine starts and runs well - The generator does not generate voltage - A used replacement generator can be purchased for an extra charge (see Fig. 5) - - - - - Scope of delivery: - Lister generator set 20 kVA - Consisting of motor and generator - Installed on a metal base frame - For an extra charge, a used 20 kVA generator can be purchased (see picture 5) - - - - - Transport: - Germany-wide transport is possible for an extra charge - To be able to quote an exact freight price, please ...
Year of manufacture 2007 Banding device Computer control with digital display Mobile substructure Delivery date: immediately Price on request. We supply and install worldwide.
Zebra110pax4 label printer and pneumatic stamp. RA2315 Printer manufacturer: Zebra Printer type 110pax4 Control panel: LCD display with status display and buttons on printer, manual control panel on the side and control via PLC I/O Print type: Thermal transfer printing or direct thermal printing selectable Interfaces: Ethernet/control cable Print media: Standard media, tags and RFID media (reading and encoding of RFIF labels) Current label size: 90x36mm, applicator is designed for this size Label length min: 12.7mm Print media width: 16-114mm Ribbon width: 25.4-107mm Ribbon length max: 900m Roll size core diameter: 25.4mm Roll size maximum diameter: 101.6mm Resolution: 203 dots/inch (8 dots/mm) Dot size: 0.125mm x 0.125mm Print speed: 12 inches/second Base area: 700x700mm, with 100mm protruding control panel/compressed air maintenance unit Applicator height: 800mm lower edge Print speed: ...
VA outdoor silo Zeppelin-Reimelt last content Sugar Ø 4,000 mm Content approx. 175 cbm Discharge: vibrating floor, lock, etc. Jet filter on top Bulk density 1.1 t/m³ Ladder, entrance door, full detector, silo entrance see pictures Price on request or Send asking price Phone +49 (0)172 8345457
maximum number of results exceeded
please refine your search
