126,612 used machines on RESALE, but how to find them? Machine Search
Rotor laboratory shredder RETSCH ZM 200 (ZM200) Model: ZM200. Rotational speed: from 6000 to 18000 rpm Initial size: up to 10mm Final fineness: < 40μm With new standard cassette With stainless steel file rotor, 12 teeth Without sieves Power Consumption: 1300W Dimensions: 410 x 515 x 365mm Weight: 38Kg Year of manufacture: 2015 In excellent condition
Geared motor, electric motor, electric geared motor, variable speed geared motor, variable speed geared motor -Manufacturer: Flender Himmel, geared motor -Type: Z10-M1C4 -Speed: 101 rpm -Power: 0.37 kW -Protection rating: IP54 -Shaft: Ø 16 x 30 mm -Design: B6 -Dimensions: 335/185/H160 mm -Weight: 12.7 kg
: neu : Bulgarien : 77840 € : 1471.18 € : 760 mm : 3000 mm : 380 mm : 132 mm : 520 mm : 560 mm : 11 : 140 MK : 17 : 7,5 - 1015 1/min : 150 : 0.039 - 18 mm/U : 0.02 - 9 mm/U : 0.5 - 180 mm : 60 - 1/6 Gänge/ : 0.125 - 45 : 410 mm : 150 mm : 105 mm : 6 MK : 225 mm : 15 kW : 4470 kg driven by conventional transmission 3-axes digital readout quick change toolpostAmestra type Multifix with 4 holders (3 square, 1 round) 3-jaw chuck Bison3295/DIN6350, Ø 400 mm spindle dead center four way rapid traverse device foot pedal brake longitudinal stop for 1 position coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock tailstock quill reducer mechanized movement of tailstock low voltage machine lamp operating manual machine according to ",CE", FURTHER TURNING LENGTHS: t ...
Agitator bead mill / bead mill Manufacturer: Netzsch Type LMZ 2 – ZETA system Power 6 kW Weight approx. 280 kg Grinding chamber volume approx. 1.6 litres Regrind volume approx. 0.8 litres Grinding vessel cantilevered attached Agitator speed infinitely adjustable via frequency converter Drive from the motor via belt drive to the drive shaft. Documents available
ZEISS TELAVAL 31 Reverse Transmitted Light Microscope Model: TELAVAL31 Binocular Head Adjustable eyepieces: Zeiss GF-P10x 18 Annular diaphragm T31 Ph 6 V / 25 W lamp 220V 3 objectives: Achromat 5x/ 0.12 Infinity/- A, Carl Zeiss Jena, M 25 Achromat Ph 10x /0.25 Infinity/- A, Carl Zeiss Jena, M 25 Phase Contrast Achromat LDN Ph 20x /0.35 Infinity/1.2-A, Carl Zeiss Jena, M 25 Phase Contrast Tested and verified hardware In good condition Power cord
HAITIAN ZHAFIR 230 T Hybrid Injection Molding Machine Type: ZE 2300-830 Closing Force: 2300 kN / 230 T Year: 2015 Screw Diameter: 50 mm Injection Volume: 421 cm³ Injection Pressure: 2000 bar L/D Ratio: 25 Distance Between Tie bar : 620 mm x 620 mm Opening Stroke: 550 mm Mold Thickness (min/max): 220/600 mm Motor Power: 151 kW
x-travel: 1200 mm y-travel: 2415 mm z-travel: 1000 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The machine was around 6 years complete overhauled and its control technologywas brought to the newest status. Technical details: Distance between portal columns: 1440mm X-travel (cross): 1200mm Y-travel (longitudinal): 2415mm Z-travel (vertical): 1000mm Feeler head: Vast Gold Regularly maintenanced through company Zeiss With housing The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Inv. Num. : 9062 Type: OHP 6 Producer: ZAKO Created: GO 2023 Parameters: Control system: FENIX Maximum sheet metal plate width: 6000 mm
Oil-free screw compressor Atlas Copco ZR75FF Dryer integrated 75 kW 8.35 bar 11 m3/min Year of Make: 2004 Hours: 44,153
A Frenco workshop gear testing device is available. Bed length: 590mm, min. center distance: 45mm, max. center distance with fine adjustment/without fine adjustment/without intermediate plate: 105mm/155mm/320mm, repeatability: 1.5µm, intermediate plate length: 210mm, max. worm diameter: 78mm, center distance (worm lengths): 0mm-220mm, measuring table dimensions X/Y/Z: 800mm/700mm/940mm. Machine dimensions X/Y/Z: approx. 1200mm/800mm/1750mm, weight: approx. 330kg. Documentation available. An on-site inspection is possible.
measuring range X-axis: 500 mm measuring range Y-axis: . mm Table dimensions: . mm tool diameter: . mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
A 3-axis milling machine is offered. Travels X/Y/Z: 1016mm/610mm/760mm, tool changer: 24 positions, spindle: prepared for external cooling unit. Accessories: recooling unit Rehsler TAE evo M, Renishaw measuring system, inspection by appointment possible.
Offer 24407 Technical data: - 2 motor-driven rollers - Hydraulic. Feed of the upper roll Pressure capacity 18 t - Shaft diameter 60 mm - Shaft rotation 6 rpm - Roller diameter 215 mm - Bending performance - flat steel R 300 upright 80 x 15 mm - R 300 flat 120 x 25 mm - Square R 300 50 mm - Round tube R 900 100 x 2 mm - Drive 400 V / 1.5 kW - with: - separate control panel with digital display + foot switch - right / left – run - Lateral straightening rollers - Standard bending kit for flat and angle material - Weight approx. 1200 kg - Space requirement approx. W 1000 x H 1750 x D 1250 mm
Description Suitable for Heidelberg Speedmaster SM 52 1 anilox roller hexagonal engraving for dispersion coating 1 anilox roller hexagonal engraving for UV coating Transfer volume 16-18 cm3/m2
Drill bits, twist drills, drill bits -Manufacturer: Maysso / Unisto / Hartner / Stock, Spiral drill bits 6 pieces Ø 51 - 70 mm -Type: Two-flute end mill, MK5 chuck with flat drill tip -Size/Quantity: see photo parts list -Price/Fee: complete -on request: various sizes/quantities available from further stock -Transport dimensions: 345/270/H100 mm -Weight: 23.7 kg
Drill bits, twist drills, drill bits -Manufacturer: Gühring / Unisto / Hartner, Spiral drill bits, 11 pieces, Ø 51 - 75 mm -Type: Double cutter, MK5 chucks -Size/Quantity: see photo parts list -Price/Fee: complete -on request: various sizes/quantities available from further stock -Transport dimensions: 650/430/H75 mm -Weight: 44 kg
General SKU144P678 MakeNiro Atomizer (Patterson Kelley) Type20 CLS ZZ + LB+P No.080-0027-00 Year of construction1989 LocationBarneveld Technical specs Capacity17000 liter/hour Main Features MaterialStainless steel Motor8.6 KW Specified Features - Tumbler mixer Zig-Zag tumbler mixercheck -agglomerator (1x) Continuous mixercheck Diameter550 mm Length/Depth1750 mm, Agglomerator Dia. 950 x 850 mm Inlet400 x 400mm Outlet600 x 320mm With motor7,5/8,6 KW, 660 Volt Speed mixer20 rpm With liquid injectioncheck With lump breakercheck With motor2,2/2,5 kW 220/480 Volt and 0,37/0,45kW 220/480 Volt With safety gatescheck MaterialStainless steel 1.4301 (304) Information Mounted on mild steel framecheck With switchgearcheck Floorspace4,1 x 1,4 m Total height2,1 m Weight3000 kgDiscountTumbler mixersNiro AtomizerDiscountMixers > Tumbler mixersBrand > Niro Atomizer What you ...
: neu : 2025 : 010105 : prompt, Zwischenverkauf v : Bulgarien : 47390 € : 905.15 € : 1 : 600 mm : 2000 mm : 300 mm : 80 mm : 400 mm : 400 mm : 8 : 90 MK : 21 : 20 - 2000 1/min : 120 : 0.04 - 12 mm/U : 0.02 - 6 mm/U : 64 : 0.5 - 120 mm : 60 - 1/4 Gänge/ : 0.125 - 30 : 315 mm : 130 mm : 90 mm : 5 MK : 230 mm : 7.5 kW : 3600 mm : 1250 mm : 1400 mm : 3110 kg driven by conventional gearbox 3-axes digital readout Fagor 40i quick change toolpostAmestra Multisuisse type C with 4 holders (3 square, 1 round) 3-jaw chuck Bison3204/DIN6350, Ø 250 mm spindle dead center four way rapid traverse device electromagnetic brake longitudinal stop for 1 position coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock low voltage machine lamp operating manual machine according to ",C ...
Offer 26001 Technical data: - Horizontal + vertical working position - 3 mot. Driven rollers - hydr. Left lower roller regulation - Hydraulic cylinder pressure capacity 4 t - Shaft diameter 35 mm - Shaft rotation 11 rpm - Roller diameter 132 - 142 mm - Drive 400 V 1.1 kW - Bending capacity approx. - Round tube Ø 800 60 x 1.5 mm - Flat steel Ø 400 90 x 15 mm - Square steel Ø 400 30 mm - With: - Separate control panel with digital display - E – Footswitch in sep. Control panel for right / left run - Standard bending kit for flat and angle material - 6 tube roller sets 22 + 28 + 33 + 42 + 48 + 60 mm - Weight approx. 450 kg - Space requirement approx. W 700 x H 1150 x D 950 mm
Set of 12 E2 weights from 1 g to 500 g - ZWIEBEL New equipment in its original packaging Type: COFRAC weight series Class: Class E2 Weight: 1g / 2g / 5g / 10g / 20g / 50g / 100g / 200g / 500g Weight Material: Cobalt Alloy / Stainless Steel With wooden box
General SKU387U1057 MakeZoatec TypeProzessbehaelter 600 LocationBarneveld CEcheck Pressure Working pressure3 Bar Vacuum possiblecheck Working pressure jacket3 Bar Vacuum possible jacketcheck Main Features MaterialStainless steel Volume600 Ltr. Motor4 KW Specified Features - Processing vessel Closed stirring vesselcheck Capacity600 Ltr. (max. 890 Ltr.) Vessel sizes1000x1350 mm Conical bottomcheck Dished top sidecheck With covercheck ManholeDia: 300 mm Top connectionsDN100, DN25, DN40 (2x) OutletDN80 With jacketcheck Half coil jacketedcheck Max. temperature0/100 °C With anchor stirrercheck (with scrapers) Motor4 kW, 220-242/380-420 volt, 1460 rpm Speed mixing shaft117 rpm With homogenisercheck (Zoatec / AZO LIQUIDS: IL2, 160 mm, 600-4000 rpm) Motor18,5 kW MaterialStainless steel 1.4404 (316L) Information No.103867-00 Year of construction2013 With swit ...
The legendary GEHO ZD900: Built for the future., Why choose the Electric GEHO ZD900?, Zero Emissions: The perfect solution for projects with strict environmental regulations (urban areas and nature reserves)., Unrivaled Efficiency: With a hydraulic efficiency of over 90%, this is the most energy-efficient choice., Low Maintenance, Self-Priming & Dry-Run Safe: The ZD900 effortlessly handles both water and air, reaching a vacuum of up to 9.6 meters., Technical Specifications:, Power: High-performance 400V electric motor., Capacity: Max. 95 - 100 m³/h., Max. Discharge Head: 20 mwc (2 bar)., Controls: Equipped with a heavy-duty industrial control box., The GEHO ZD-series has been the industry standard for 60 years. With this electric 400V version, you combine proven reliability with today’s technology., , Throughput capacity: 95 m3/h, Max dirt passage: 0 mm, Max. head: 20 MWK, Max dirt pa ...
: neu : Bulgarien : 120460 € : 2276.69 € : 890 mm : 3000 mm : 400 mm : 155 mm : 490 mm : 700 mm : 15 : 160 MK : 4 : 3,7 - 15,6, 14,7 - 62, 58 U/Min : 160 : 0.032 - 38.9 mm/U : 0.016 - 19.45 mm/U : 0.5 - 480 mm : 60 - 1/16 Gänge/ : 0.125 - 120 : 525 mm : 270 mm : 125 mm : 6 MK : 260 mm : 30 kW : 7500 kg driven by variable speed control (4 steps) 3-axes digital readout FAGOR with CSS (constant surface speed) quick change toolpostAmestra with 4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 500 mm spindle dead center coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates tailstock quill reducer electric motor movement of tailstock low voltage machine lamp operating manual machine according to ",CE", FURTHER TURNING LENGTHS: turning length1.500 mm € 105 510,00 turni ...
Atlas Copco ZR400 oil-free screw compressor 400 kW 7.50 bar 62.90 m3/min Year of Make: 2001 Hours: 113,338 Replaced LP and HP elements at 92,000 operating hours. Enquiry used Atlas Copco ZR400
Qty. 1 Second-hand Sendzimir Cold Rolling Mill Mfc.: INNSE Type: ZR23 C-25 – 20-Hi Built: 1977 Stopped: 2025 Steel grades: HSLA, low and high carbon steel, etc. Strip width: 300 - 650 mm Thickness: 0.05 – 3.0 mm Max. tensile force: 15.000 kg Coil weight: 10 T AGC & PLC system: ABB
Year of Make: 2017 Engine power: 28 hp (20.9 kW) Weight: 3,217 kg Hours: 1,190 Equipment: Automatic / hydraulic quick coupler Hammer / scissor gear Rubber tracks Joystick control Air conditioning Battery Disconnect Switch Attachments: Standard bucket Trench / dozer bucket
Year of Make: 2016 Engine: Kubota 4-cylinder, 24 hp (18 kW) Weight: 2,600 kg Hours: 1,226 Equipment: Hydraulic quick coupler Quick Hitch Joystick control Hammer hydraulics Air conditioning Rubber tracks Battery Disconnect Switch Rotating warning light Attachments: 3 shovels
: neu : Bulgarien : 85520 € : 1616.33 € : 760 mm : 3000 mm : 380 mm : 132 mm : 520 mm : 560 mm : 11 : 140 MK : 3 : 7 - 42, 28 - 170, 165 - 1 U/Min : 150 : 0.039 - 18 mm/U : 0.02 - 9 mm/U : 0.5 - 180 mm : 60 - 1/6 Gänge/ : 0.125 - 45 : 410 mm : 150 mm : 105 mm : 6 MK : 225 mm : 15 kW : 4470 kg driven by variable speed control (3 steps) 3-axes digital readout FAGOR with CSS (constant surface speed) quick change toolpostAmestra type Multifix with 4 holders (3 square, 1 round) 3-jaw chuck Bison3295/DIN6350, Ø 400 mm spindle dead center main motor with frequency invertor four way rapid traverse device foot pedal brake longitudinal stop for 1 position coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock tailstock quill reducer mechanized movement of tailstock low volta ...
Forza di chiusura: 60T - Dimensioni della piattaforma: 700 x 800 mm Apertura della piattaforma: min. 560 mm – max. 1200 mm Corsa di apertura: 550 mm - Corsa verticale della piattaforma: 300 mm Larghezza massima dello stampo: 800 mm - Altezza massima dello stampo: 1000 mm Spessore minimo dello stampo: 670 mm Diametro della vite: 90 mm LD 24 Ugello miscelatore Capacità di estrusione: 270 kg HDPE Potenza del motore: 97 kW - Zone di riscaldamento: 4 Potenza di riscaldamento: 27,1 kW Capacità di stoccaggio: 8 L Peso massimo di stoccaggio: 6,1 kg HDPE Diametro minimo della filiera: 100 mm – max. 220 mm Numero di punti di controllo della preforma: 100
General SKU104U694 MakeZiemann Ludwigsburg No.507690/10 Year of construction1986 Mounted on legscheck Pressure Working pressure0.05 Bar Main Features MaterialStainless steel Volume120 Ltr. Motor1.6 KW Specified Features - Stirring vessel Closed stirring vessel(1x) Capacity120 Ltr Vessel sizesdia. 500x500mm Dished bottomcheck Flat top sidecheck Top connections(5x) Outlet± dia. 30mm With paddle stirrermake Ekato, type SD 30.126 Motor0,66/1,3 KW, 380 Volt (Ex) MaterialStainless steel 1.4541 (321) Information LocationBarneveld Floorspace1,1x0,8 M Total height2,1 M ATEX compatiblecheckStirring vesselsZiemannStirring vessels > Stirring vesselsBrand > Ziemann What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld ...
Year of manufacture: 2026, Connector size: 4 Cardan, Technical condition: very good, Visual appearance: very good, Price: On request, , = Dealer information =, , Interested? We would be happy to make you an excellent offer! Send an email to sales@vantongerentrading.nl or call +31(0)55-3125902., , Do you have a question about an advertisement, drill, pump, part, or order? Or would you just like to discuss what would be useful in your situation? , Dont keep worrying about it, just give us a call., We are available Monday through Friday between 7:00 a.m. and 6:00 p.m. Call, text, or email us, whichever you prefer., , Want to visit us? Yes, please!, , Our doors are open Monday through Friday from 7:00 a.m. to 4:00 p.m. On Saturdays, you are welcome by appointment.
This 4-axis TAJMAC-ZPS H 63 Standard was manufactured in 2008. It features an X-axis travel of 1010 mm, Y-axis travel of 800 mm, and Z-axis travel of 1010 mm, along with a maximum table load of 2500 kg. The machine is equipped with a tool changer that holds 102 positions. If you are looking to get high-quality machining capabilities, consider the TAJMAC-ZPS H 63 Standard horizontal machining centre we have for sale. Contact us for further details.
table length: 840 mm table width: 600 mm ampere: 60-120 A total power requirement: 15-23 kVA weight of the machine ca.: 2,75 t dimensions of the machine ca.: 2760 x 1110 x 1840 m With controlled C-axis and 16-position tool changer. WORKTABLE Table size: 840 x 600 mm Dielectric above table: 360 mm Maximum workpiece weight: 1000 kg T-slots: 4 x 10 mm Distance table to quill without chuck (max / min): 595 / 180 mm WORKHEAD X - Y travel: 565 x 400 mm Z travel: 415 mm X - Y - Z resolution: 0.001 mm C-axis resolution: 0.001 deg. Rapid traverse speed: 800 mm/min Max. electrode weight without rotation: 100 kg Max. electrode weight with rotation: 15 kg DIELECTRIC SUPPLY Tank volume: 400 liters Paper candle filters: 4 pieces GENERATOR Dimensions (height x width x depth): 1800 x 600 x 920 mm Weight: 300 kg Rated current: 60 – 120 A Power rating: 15 – 23 kVA Dimensions (height x width x depth): ...
This 5-axis PROMAC ZEPHYR VT 2.5 XL was manufactured in 2015. It features an impressive X-axis travel of 2500 mm, Y-axis travel of 2200 mm, and Z-axis travel of 1100 mm. The machine is equipped with a HEIDENHAIN CNC control and has a maximum spindle speed of 20,000 rpm. If you are looking to get high-quality machining capabilities, consider the PROMAC ZEPHYR VT 2.5 XL vertical machining centre we have for sale. Contact us for further details.
: neu : ca. 4 Monate ab Auftragse : Bulgarien : 44400 € : 848.04 € : 500 mm : 1500 mm : 250 mm : 80 mm : 300 mm : 400 mm : 8 : 80 MK : 21 : 20-2000 1/min : 120 : 0.04 - 12 mm/U : 0.02 - 6 mm/U : 64 : 0.5 - 120 mm : 60 - 1/4 Gänge/ : 0.125 - 30 : 240 - 1 : 315 mm : 130 mm : 90 mm : 5 MK : 230 mm : 7,5 kW : 3100 mm : 1250 mm : 1400 mm : 2820 kg driven by manual transmission 3-axes digital readout quick change toolpostAmestra with 4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 250 mm spindle dead center longitudinal stop for 1 position coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock low voltage machine lamp operating manual machine according to ",CE", FURTHER TURNING LENGTHS: turning length1.000 mm € 43 420,00 turning length2.000 mm ...
This 5-axis ZEISS Contura G2 7/10/6 RDS was manufactured in 2010. It features an X-axis travel of 700 mm, Y-axis travel of 1000 mm, and Z-axis travel of 600 mm. The machine is equipped with a tilting head for versatile measurement capabilities and is air-conditioned for thermal compensation of both the machine and workpiece. If you are looking to get high-quality measurement capabilities, consider the ZEISS Contura G2 7/10/6 RDS CMM machine we have for sale. Contact us for further details.
Optical measurement machine manufactured in 2009. This Zoller Venturion 600/8 features a maximum tool length of 800 mm and a maximum tool diameter of 440 mm. It is equipped with a tool holder for SK50 and SK40. With a maintenance contract in place and annual calibration performed, this machine is in good condition. If you are looking to get high-quality optical measurement capabilities, consider the Zoller Venturion 600/8 machine we have for sale. Contact us for further details.
This 3-axis SCM TECH Z25 PLUS H-R4 was manufactured in 2005. It features a working area of 2500 x 1000 mm and a travel range of 2980 mm on the X-axis, 1280 mm on the Y-axis, and 200 mm on the Z-axis. The machine is equipped with 16 spindles operating at 4000 rpm and an electric spindle with a maximum speed of 18,000 rpm. If you are looking to get high-quality CNC processing capabilities, consider the SCM TECH Z25 PLUS H-R4 machine we have for sale. Contact us for further details.
A conventional lathe Zimmermann with some modification measures is available. Turning diameter over bed: 1000mm, turning length: 430mm, distance between centers: 1000mm, 3-support travel: 500mm/300mm/200mm, chuck diameter: 250mm. Documentation available. An on-site inspection is possible.
This 3-axis ZEISS prismo 700 was manufactured in 2000. It features a measuring range of 900 mm in the X-axis, 1500 mm in the Y-axis, and 700 mm in the Z-axis. The machine is equipped with Zeiss Calypso 2022 software and an active scanning probing system. If you are looking to get high-quality measurement capabilities, consider the ZEISS prismo 700 CMM machine we have for sale. Contact us for further details.
CNC lathe Type: TCH 500 Prime/80 Manufacturer: Tajmac-ZPS Year: 2006 Control: Siemens Sinumerik 840D Turning diameter: 550 mm Turning length: 1000 mm Spindle bore: 80 mm X: 360 mm Z: 1100 mm VDI 50 rev.head: 12 positions Spindle speed: 3200 rpm Driven tools Tailstock Machine weight: 9500 kg Machine in good condition, fully functional, under power Find more here - / Contact us at -
maximum number of results exceeded
please refine your search
