z conveyor used for sale

x-travel: 4700 mm y-travel: 1000 mm z-travel: 1000 mm control: HEIDENHAIN TNC355 table-size: 5000x1000 mm T-slots: 7x mm turning speed range: 2800 U/min feed: 6-5000 mm/min rapid traverse: 15000 mm/min spindle motor: 30,00 kW spindle taper: SK 50 Table load: 10.000 kg Main drive: 40 PS weight of the machine ca.: 27,00 t dimensions of the machine ca.: m With HEIDENHAIN TNC 355 control. Machine can be inspected under power. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 12000 mm y-travel: 2500 mm z-travel: 1000 mm control: Heidenhain TNC 415 taper ISO: 50 P.D.B. spindle speeds: 20 - 1800 mm voltage: 380 V total power requirement: 37 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

measuring range X-axis: . mm measuring range Y-axis: . mm Table dimensions: . mm tool diameter: . mm digital readout: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 160 t throat: 360 mm stroke: 500 mm table surface area: 1250x630 mm ram surface: 1000x450 mm table height: 1000 mm dayligth: 800 mm weight of the machine ca.: 8 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Electronic module, control card ZEISS 608481-9003-701 608481-0303 Spare part for 3D coordinate measuring machine ! used, tested ! Dimensions: 235 x 180 x 15 mm

Electronic module, control card ZEISS 608481-9228 608481-2802 Spare part for 3D coordinate measuring machine ! used, tested ! Dimensions: 235 x 180 x 15 mm

Electronic module, control card ZEISS 608481-9003-702 608481-0303 Spare part for 3D coordinate measuring machine ! used, tested ! Dimensions: 235 x 180 x 15 mm

Electronic module, control card ZEISS 608481-9320 608481-2004 Spare part for 3D coordinate measuring machine ! used, tested ! Dimensions: 235 x 180 x 15 mm

Electronic module, control card ZEISS 608481-9003-703 608481-0303 Spare part for 3D coordinate measuring machine ! used, tested ! Dimensions: 235 x 180 x 15 mm

Electronic module, control card ZEISS 608481-9031 608481-3103 Spare part for 3D coordinate measuring machine ! used, tested ! Dimensions: 235 x 180 x 15 mm

Electronic module, control card ZEISS 608481-9003-704 608481-0303 Spare part for 3D coordinate measuring machine ! used, tested ! Dimensions: 235 x 180 x 15 mm

Electronic Module, PC Board Module ZEISS 608481-9146 608481-4602 Spare part for 3D coordinate measuring machine ! used ! Dimensions: 180 x 100 x 25 mm

Electronic module, control card ZEISS 608481-9124 608481-9024-2401-V1 608481-2401 Spare part for 3D coordinate measuring machine !' used, tested !' Dimensions: 235 x 180 x 15 mm

Electronic module, servo controller, power supply ZEISS 608483-9009-0901 spare part for 3D coordinate measuring machine ! used, tested ! Dimensions: 265 x 235 x 70 mm

Electronic Module, Control, Machine Board ZEISS 608483-9106.000 608483-9106-0602 608483-0602 spare part for 3D coordinate measuring machine !' used, tested !' Dimensions: 235 x 180 x 25 mm

Electronics Module CARY SWISS D150 C ( D150C ) MC D150D used ! Dimensions: 170 x 100 x 30 mm

Electronic module, coordinate measuring board ZEISS 608483-9103.730 608483-9003 spare part for 3D coordinate measuring machine ! used, tested ! Dimensions: 235 x 180 x 15 mm

Electronic Module, Servo Controller, Servo Module ZEISS 608482-9014 608481-4905 Spare part for 3D coordinate measuring machine ! used, tested ! connector defective! Dimensions: 265 x 235 x 65 mm

Three-phase electric motor with tachometer generator and forced ventilation ZIEHL-ABEGG RD 160. 24 - 4 ( RD160.24-4 ) Type IMB3 11 kW 1380 rpm 400 V IP55 Shaft: Ø 42 mm used, tested ! Dimensions: 550 x 530 x 610 mm

Centrifugal fan, centrifugal fan ZIEHL-ABEGG Type: RD20S-4EW.4C.1L Speed: 1140 rpm Motor : 0.36 kW 230 V AC used, tested ! Dimensions: 380 x 320 x 350 mm

Axial fan ZIEHL-ABEGG series FB 4-bladed aluminium sheet blade diameter: 497 mm voltage: 400V frequency: 50 Hz degree of protection:: IP 54 Dimensions: 590 x 590 x 225

Centrifugal fan, centrifugal fan, centrifugal fan ZIEHL-ABEGG Type: GR31M-2EK.3F.2R Blower: RH31M-2EK.3F.2R Speed: 2470 rpm Motor : 0.68 kW 230 V used, tested ! Dimensions: 500 x 500 x 200 mm

Iron gauge, Passameter CARL ZEISS 50 - 75 mm in wooden box Dimensions: 250 x 145 x 40 mm

Iron gauge, trade passometer CARL ZEISS 100 - 125 mm adjuster for tolerance area is missing ! in wooden box Dimensions: 300 x 175 x 40 mm

Iron-on gauge, trade passometer CARL ZEISS 125 - 150 mm in wooden box Dimensions: 330 x 195 x 40 mm

Optical Dental Measuring Screw Gauge CARL ZEISS JENA module: 1.5 - 18 mm scale width: 0.02 mm with protective box Dimensions: 165 x 150 x 35 mm

Precision measuring device, tripod with measuring screw CARL ZEISS JENA 0 - 25 mm scale width: 0.01 mm DIN 863/1 Dimensions: 155 x 115 x 70 mm

Universal measuring device, touch probe CARL ZEISS JENA 40 - 160 mm (similar to Multimar) accuracy dial gauge: 0.01 mm used, tested ! Dimensions: 320 x 70 x 40 mm

for sale is a screening plant from Zeppelin, Year of construction 2015, Subject to prior sale, changes and errors!

Deep groove ball bearing, single row ZKL 6007 C3 version: C3 d = Inner = 35 mm D = Outer = 62 mm B = Width = 14 mm welded individually packed Minimum order value 50,- �

"Lower piston press => table/stroke from bottom to top". Technical data Manufacturer: Hans Schoen Year of construction: 1997 pressing force: 500t table clamping area: 640mm x 800mm mounting height: 380mm stroke: 150mm Find more here - /

Spray-on gouing machine for rigid box mounting X-Y CNC Make Dalian Jori Model ZH500 Year 2018 Min size 30 x 30 mm Maximum size 500 x 1000 mm Thickness 1 - 3 mm Details after manual placement of the cases the machine can start to spray on a pattern of glue onto the cases, after the operator can place manually a rigiid box onto the case. there are 2 types of heads, , can do circular forms, Available direct

Block moulding machine with mixing plant for sale. The board paver of the manufacturer Zenith, type 860 AZ, built in 1988, has been in continuous operation at the same location. In addition to the stone paver, the entire production circuit and a production circuit and a complete mixing plant with 3 TEKA mixers (2x THZ1875 and 1xTHZ1125), year of construction 1985. The plant can be fully used after acquisition. The stone paver is still in operation until at least the end of September 2023 and can be inspected in production until then. Stone moulding machine: - Board paver from the manufacturer Zenith, type 860 AZ, year of manufacture 1988. - Production of core and facing - Control Simatic S 5 with visualisation from Zenith - Board size 1,400 x 950 mm - Maximum production height 14 cm - Pneumatic mould clamping Find more here - / Contact us at -

ZENO CMX 300 / NT 65 Mixing plant Type: CMX300 M.No.: 15A-6180Pos.25 Motor: 2x 30KW/55A Year of construction: approx. 2014 Weight: approx. 6000kg Dimensions: with access = L 5450 mm x W 3700 mm x H 1800 mm without access = L 3950 mm x W 1700 mm x H 1800 mm Conveyor belt: Type: NT 65 M.No.: 15A-6180Pos.24 Motor: 11KW/21A Year of construction: approx. 2014 Weight: approx. 5000kg Dimensions: with access = L 13000 mm x W 3300 mm x H 1500 mm without access = L 13000 mm x W 1300 mm x H 1500 mm Dl777x Mixer & conveyor belt are one component. Find more here - / Contact us at -

2013 Ibarmia ZVH 45/L1600 Extreme 4 axis vertical machining center Type: ZVH 45/L1600 Extreme Manufacturer: Ibarmia Year: 2013 Control: Fanuc X- 1600 mm Y- 800 mm Z- 900 mm Rotation angle +/-105° Maximum spindle speed 12000 rpm Number of tools in the magazine: 24 Work table dimensions: 2000 x 850 mm Included a wall that divides the table into two parts, so it is possible to machine separately in one part and clamp in the other part Machine in good condition, under power. Find more here - / Contact us at -

1997 Zdas QKK 12 Manipulator Type: QKK 12 Manufacturer: Zdas Year: 1997 Overhaul: 2006 Max carrying capacity: 12 000 kg Tilting moment (D x L/2)​​​kNm​​​ 260 Tongs opening ​- min.​​​ 360 mm, ​​max.​​​950 mm Tongs rotations ​- max.​​​min-1​​​15 Travel speed ​- max.​​​​m/min​​​40 Installed input​​​​​ 95 kW Machine in very good condition. Find more here - / Contact us at -

cutting width: 180 mm Cutting height: Ø140 mm Motor output: 2,2 kW Cutting height at 45°: Ø120 mm Dimensions (L/W/H): 700x950x1750 mm machine weight ab.: 180 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

60 cbm Aluminum Silo Manufacturer: Zeppelin Bulk density 0.6 Diameter 2.40 m Height without railing 15.50 m Cone 90 ° Ladder Railing Filter Rotary valve Drawing available

pressure: 40 t stroke: 250 mm total power requirement: 6 kW weight of the machine ca.: 3 t distance between columns: 600/350mm mm table surface area: 860x620 mm ram surface: 860x620 mm table height: 900 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Image Processing Software '''Pilot 3.0'' Set tools of all kinds with high precision and measure them automatically. Measuring range Z Measuring range X 450 / 620 / 820 mm 210 / 310 mm Max. tool Ø pharyngeal gauge Ø 420 / 620 mm 100mm Adapter for SK 40 / VDI 40 / VDI 50 incl. computer and printer Graphical, self-explanatory user interface, Quickly accessible features, Large click and touch areas, Photoreal input dialog, Dynamic crosshairs, Self-explanatory function keys, Automatic cutting shape recognition, Automatic zero point monitoring, Brilliant precise cutting display and inspection, Tool and adapter management, Tool identification, Test report output, Data transmission to machines and interfaces to third-party systems and many more Functions.

: 100 mm roll diameter: 315 mm bending speed: 5 m/min bending capacity - flat iron: max. 12 x 20 mm : 75 mm Drive: 11 kW weight: 2.600 kg range L-W-H: 1950x1600x2100 mm Equipment / Accessories: - Two driven rollers - Hydraulic delivery of the upper roller - Digital display with memory function - Working position horizontal and vertical - Bearings with tapered roller bearings - Use of replaceable slide rails on the guide carriage - Footswitch - standard roller set The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. wheel diameter: 200 mm gear width: 140 mm max. module: 5 workpiece length - max.: 400 mm external diameter: min. 20 mm control: Siemens Sinumerik max. tool diameter: 270 mm Max. mould width: 50,8 mm Distance of shafts: min/max. 120/230 mm axial cross angle: -18 / -21 ° shaving wheel spindle turning speeds: max. 400 U/min weight of the machine ca.: 5,5 t dimensions of the machine ca.: 3,6 x 2,6 x 3,3 m Electric 400 Volt: workpiece magazine: The ZSE 150 scraping machine is used in small and medium series production as a universal scraping machine with a deburring unit on the back. Compact and easily accessible, all operating elements and the work area are easy to reach from the operators location. A large operator door provides unhindered access to the work area. This enables simple and quick conversion and tool changing processes. This machine is equipped with a pallet ring magazi ...

x-travel: 1016 mm y-travel: 610 mm z-travel: 760 mm total power requirement: kW weight of the machine ca.: t required space: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Atlas Copco ZT30 Air compressor Serial: AIF065086 2000, oil free air cooled screw compressor, operating pressure 8.6Bar, compressor output 69 l/s, motor 30Kw, comes with Ultrafilter International dryer model: HLALD0225 and Abbott air tank

turning diameter over bed: 1420 mm turning diameter over slide rest: . mm turning length: 3150 mm faceplate: 500 mm turning speeds: 176 U/min steady: 160 mm total power requirement: kW weight of the machine ca.: 15,68 t dimensions of the machine ca.: m Chip conveyor can be purchased as an option for €7,500 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Urban 4 m bed milling machine SK40 against bid. Slightly used, was only rarely used! In February 2023, the machine was set up and put into operation by the company Urban and has only very few operating hours. As an accessory, the machine has a pick-up station including angular head drive. Bids from the Dossenheim location.

Manufacturer: GROSS Model : Z7400 Year of Manufacture: 2001 Type of Machine: Briquetting machine Power Output: 7.5 kW Nominal Voltage: 400 V Rated Current: 30 A Control Voltage: 30/24/211 V Fuse Protection: 10 A Hydraulic Operating Pressure: 280 bar Frequency: 50 Hz Operating hours are estimated at less than 100 hours and it also includes an unused 10,000 l oil tank. Find more here - / Contact us at -

MAX DIAM 250 MAX LENGHT 800

Manufacturer: Ziersch Model: ZT 820 Year of Manufacture: 2008 Type of Machine: Grinding Machine Certification: CE Marked Find more here - / Contact us at -

Key data: 140 mm, 280 mm

Zimas D290V - Lathe Special price € 2,800 instead of € 3,490 excl. VAT - 2-axis position indicator - Stepless speed adjustment with digital display - Plan feed - Camlock mount C4 - Upper slide can be rotated 360° - Tailstock adjustment +/- 5 mm for taper turning Accessories - Undermount with 1x door & 3x drawer - Three-jaw chuck 160 mm with interchangeable jaws - Fixed bezel - Centering tip - Operating tools Specifications Range: - Circumferential Ø over bed: 290 mm - Circulating Ø over cross slide: 180 mm - Turning length between tips: 700 mm - Bed width: 182 mm Headstock: - Spindle bore: 38 mm - Spindle nose: MK5 - Speed levels: infinitely variable - Speed range: 80 - 2000 rpm Feed: - Metric threads: 0.2 - 3.5 mm / 18 steps - Inch thread: 8 - 56 dpi / 21 levels - Longitudinal feed: 0.085 - 0.832 mm - Transverse feed: 0.01 - 0.10 mm Sleds a ...